Is it possible to output to fit on DVD?

I have created a video in Premiere Pro and exported it to Encore and built menu's. The total length of the video is 2hrs & 8 minutes. Is there a way to output this to DVD to fit? maybe reducing quality of video or something? Thanks for your help.

Depends on the type of video file imported into encore. If it's anything other than mpeg-2, like an avi file, than you should be able to just use automatic settings. But you'll want to transcode anything you can before your main video file so it calculates disc size correctly. Transcode clips used for menu backgrounds, etc. before you transcode your main file in automatic. If you have already transcoded to mpeg-2 in premiere, re-transcoding might take a long time again or degrade the image too much.
In CS3 Encore, I've had trouble with jitttery motion with automatic setting, but that might just be my computer. Because I haven't found a solution I use manual settings and project is sometimes too large to fit on a disc. For these occasions I use another free download program called DVD Shrink. (Google it.) It is much quicker to run through that program for me than re-transcoding. Just export your project as a DVD Folder and use those files in DVD Shrink and it will make new ones in a temp folder of your choosing, plus it will burn a disc for you. Does it pretty quickly also. Plus, you can sometimes get away if you are slightly over with just shrinking your menu stuff and leaving your main video file alone. I also use a sharpen filter in the settings and I am very impressed with the results.

Similar Messages

  • Is it possible to output multiple clips from a multitrack session, at the same time?

    I'm using Audition CC 2014.2
    on Windows 7 Pro x64
    I am trying to figure out how to output several clips from a multitrack session, at the same time.
    A session like this:
    Is it possible to output 5 files right now?
    I can select each one (or even multiple) and use File > Export > Multitrack Mixdown > Selected Clips to do one at a time only.
    I'm hoping for a way to give each clip (or group of clips) a predefined filename, by perhaps using markers or something like that, which would then allow me to faster "automate" the exporting of each section into a different sound file.
    This ability would be really helpful when using a single multitrack session to generate multiple sounds and a change to globally applied effects is made and all sounds now need to be updated.
    Any ideas?

    They are, yes, but I'm also working with multitrack sessions using clips made from various different sound files.
    Ahh ok, use markers?
    So, this sort of thing isn't possible in multitrack mode then?
    If not, it sounds I'll have to "mix down" my multitrack session into a single file and set up the markers in Waveform Edit view.
    That's an extra step I'd have to do, and after editing the multitrack session, surely some markers . . . oh wait, no . . . every time I output the new mix down file from the multitrack I'd need to redo all the markers. Drat . . .
    Honestly, I am very new to Audition, but I'm about to plow into it, big-time, and I'm hoping for a nice non-destructive and fast workflow that'll enable me to output sets of sounds from the same multitrack session.
    But, it seems like this functionality is currently missing.

  • Is it possible to output at 50Hz to a TV from my Macbook Pro? Under display setting my minimum option is 60Hz.

    I am trying to connect my Macbook Pro to an old analog TV. I have a digital to analog signal converter and am sending signal via VGA to a composit video cable, everything seems to work fine. The TV is detected by the laptop, I can see the picture flickering (although the background photo is visible), so I believe eveything is working apart from the TV is 50Hz, and under display settings the minimum I can select is 60Hz. Is it possible to output at 50Hz from my Macbook and if so, how?
    Thanks in advance to anyone who can help with this issue!

    Does anybody know a solution to this.

  • Is it possible to output to div monitor and s-video at the same time?

    I'm editing video and want to see the broadcast results on the fly (ie monitor and tv side by side, same image onscreen). Is it possible to output to div monitor and s-video at the same time? Maybe thru a splitter cable. I'm concerned about resolution issues.

    This is not possible with a mini.

  • Is it possible to do best fit line in chart in numbers

    is it possible to do best fit line in chart in numbers

    Hi R,
    This is a Scatter Plot in Numbers 3.1. Data are in Body Columns, not Header Columns.
    Click on the chart, then Format Panel > Series > Trendlines
    Choose a Trendline. You may click on Show Equation and Show R2 (R squared).
    Regards,
    Ian.

  • Is it possible to boot from a shared dvd or disk image remotely

    Is it possible to boot from a shared dvd or disk image remotely without using netboot for install or utility?

    All Apple Remote Desktop can do is point a system to a startup disk; it has no facility for providing a boot image. So you may want to ask this question in the Mac OS X or Mac OS X Server forums. You'll be more likely to get suggestions there, though other than NetBoot I know of no way to boot a group of computers from a single disk image or DVD.
    Regards.

  • I downloaded CS6 and was told that it was possible to make a hard copy DVD for safety,is this correct and if so how is it done?.

    I downloaded CS6 and was told that it was possible to make a hard copy DVD for safety,is this correct and if so how is it done/.

    Use a DVD burning program:
    https://www.google.com/search?q=vdvd+burning+program&ie=utf-8&oe=utf-8&aq=t&rls=org.mozill a:en-US:official&client=firefo…

  • How to burn a dvd from Bridge, through the Output Module to a DVD?

    How do I burn a dvd pdf slideshow?  I have CC, ACR, Bridge and I have loaded the Output Module.  I know how to create the slideshow in Bridge.  How do I get from Bridge through the Output Module to the DVD?

    Copying the pdf to DVD is an OS function, not something to do from Bridge.  When you save the pdf you select a location where to save it (desktop or folder of your choice).  To copy that saved pdf file to DVD you use a DVD writing program on your system or OS copy function (such as windows explorer if on windows) to copy from the location where you saved the pdf to the DVD drive on your system.

  • What DO I need to output HD projects to DVD?

    Trying to piece together how I will output HD footage to DVD. Have researched and paged through this forum and as a technophobe can't quite get it..I know FCP7 does have output to basic blu ray...I know toast and encore will get me there, but what do I need to actually burn???
    I have DVD studio pro 4.2.1 which came with the Mac tower, if I get toast which is in my price range will that prepare an HD file to burn? Please help with the steps to output and what I need. The films will be shown on a theatre screen and for TV, computer viewing.
    Catherine

    It's not that easy.
    You provided the target venue but not the output hardware. A Blu-ray player is useless if the projection system can't see the signal. Figure that one out first.
    then you'll need to tell us what you think you mean by "HD." what codec, what format, what frame rate.
    FCP6 and FCP7 wil handle most HD material but, depending on the source, often at the cost of performance or additional transcoding to get the material into the application. Toast, AKFAIK, comes with a manual that will tell you how to build Blu-ray, if that's what you need to do. The Share from FCP to Blu-ray seems to be workable but flawed. You may want to look more seriously at the Adobe suite of products for the PC if you will be using Blu-ray exclusively and charging admission.
    Give us a few days for others to post more substantive and helpful information.
    bogiesan

  • Every time I want to download an app From AppStore when I start downloading it after I write my password there is warning that says to me that it isn't possible right now to download power DVD mobile even now were this app is deleted from my ipad

    Every time I want to download an app From AppStore when I start downloading it after I write my password there is warning that says to me that it isn't possible right now to download power DVD mobile even now were this app is deleted from my ipad

    The power DVD app is active, and seems to download ok.  You have already deleted the app? 
    I suspect what is happeneing is that a download is in your queue, and is blocking the queue until it completes, thus the message every time you try to do a down load.  It may be failing because while it thinks you have the app, it is not finding it, and doesn't know what to do.  ( sounds like a poorly designed download).
    I think the way around this might be for you to resync with your iTunes, and let it reload the app onto your pad.  Let it complete the download.  Then, if you do not want the app, delete it again from your pad, and if you never want it, from I tunes as well.
    The next time they do an update, you may wind up in the same situation, so if it happens again, until they fix the download routine, you will get stuck again.
    So try the suggestion, and see if this clears it out.
    The other option would be to open your account in I tunes on your computer, let it complete the download there.

  • Is it possible to locate the CD or DVD drive

    I was wondering whether it was possible to s it possible to locate the CD or DVD drive with Labview.
    My application kinda needs to copy files off the cd drive onto the computer but i don't know how to locate the cd drive
    thanks

    I'll add some more information about our problem.  We would like to detect if a particular drive letter is a CD or DVD drive.  The functionality should be similar to the following DriveInfo member in C#.
    http://msdn.microsoft.com/en-us/library/system.io.driveinfo.drivetype.aspx
    It can tell if a drive letter is a CDrom, Fixed, Network, Removable, Unknown, etc... drive. 
    I have searched the Advanced File VIs and Function for suitable functions and the GetVolumeData VI is very close (and we could probably detect drives with no free space).  However, I wonder if there are any other VIs that can help. 
    Another example is the following:
    http://binaryworld.net/Main/CodeDetail.aspx?CodeId=917 
    Thanks in advance,

  • Is it possible to do 3D fitting in Labview?

    Hi,
    I have a function of the type z=f(x,y). Is it possible to fit z in terms of polynomial of the form z=a+b*x+c*x*y+d*x*y^2+.... using Labview. I have Labview 7.1.
    Thanks,
    Hamza

    Of course this is easily possible. Just use General LS fit. Have a look at my simple example in this thread:
     http://forums.ni.com/ni/board/message?board.id=170&message.id=129944
    .It shows how to do it also using Levenberg marquardt, but General LS is probably preferred for such a simple problem. Let me know if you have questions.
    Message Edited by altenbach on 01-12-2006 10:06 PM
    LabVIEW Champion . Do more with less code and in less time .

  • Is it possible to output a report as a text file (.txt) in a Data Driven Subscription?

    Is it possible to create a Data Driven Subscription report as a text file output to a shared folder? Thanks.
    Kahlua

    Hi Vicky:
    Thank you for your reply. I changed the config file in SSRS and it works. I managed to generate a text file with Data Driven Subscription as the report output in a shared folder. However is it possible not to have the "double quote" wrapping around
    the text. Do I need to modify the config file to remove the "double quote" and how. Thanks. 
    Kahlua
    <Render>
    <Extension Name="XML" Type="Microsoft.ReportingServices.Rendering.DataRenderer.XmlDataReport,Microsoft.ReportingServices.DataRendering"/>
    <Extension Name="NULL" Type="Microsoft.ReportingServices.Rendering.NullRenderer.NullReport,Microsoft.ReportingServices.NullRendering" Visible="False"/>
    <Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering"/>
    <Extension Name="PDF" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.PDFRenderer,Microsoft.ReportingServices.ImageRendering"/>
    <Extension Name="TAB" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
    <OverrideNames>
    <Name Language="en-US">TAB (Tab Delimited Text File)</Name>
    </OverrideNames>
    <Configuration>
    <DeviceInfo>
    <FieldDelimiter xml:space="preserve">[TAB]</FieldDelimiter>
    <UseFormattedValues>True</UseFormattedValues>
    <NoHeader>True</NoHeader>
    <FileExtension>txt</FileExtension>
    <Qualifier xml:space="preserve"></Qualifier>
    <ExcelMode>False</ExcelMode>
    </DeviceInfo>
    </Configuration>
    </Extension>
    <Extension Name="RGDI" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.RGDIRenderer,Microsoft.ReportingServices.ImageRendering" Visible="False" LogAllExecutionRequests="False"/>
    <Extension Name="HTML4.0" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html40RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="False" LogAllExecutionRequests="False"/>
    <Extension Name="MHTML" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.MHtmlRenderingExtension,Microsoft.ReportingServices.HtmlRendering"/>
    <Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering"/>
    <Extension Name="RPL" Type="Microsoft.ReportingServices.Rendering.RPLRendering.RPLRenderer,Microsoft.ReportingServices.RPLRendering" Visible="false" LogAllExecutionRequests="false"/>
    <Extension Name="IMAGE" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.ImageRenderer,Microsoft.ReportingServices.ImageRendering"/>
    <Extension Name="WORD" Type="Microsoft.ReportingServices.Rendering.WordRenderer.WordDocumentRenderer,Microsoft.ReportingServices.WordRendering"/>
    </Render>

  • Possible to output to multiple bluetooth speakers in Leopard

    I am currently using my Mac to output to a pair of Bluetooth speakers, which works great for ITunes. I'd like to output to multiple sets of speakers(two) so that I can have music in two rooms - does anyone know if that is possible?
    Thanks!

    Hi Fred ;
    How about some additional information; such as how you are downloading and where are they being downloaded from?
    Allan

  • How is it possible to output the contents of all annotations to file or text box?

    Hello,
    I am trying to get the contents of all annotations (except attachments) within a PDF. Creating the Javascript code to enumerate all annotations in the document is not a problem. I am puzzled as to how I can either save the output to a unicode text file (preferable to a filename picked by user) or place it in an on-screen textbox in a dialogue so the user can copy it to the clipboard. As far as I understand, it is possible to generate a new PDF with the output, but I would like the code to work in Adobe Reader also.
    Thanks a lot!
    Best regards,
    Stanislav

    Thanks for your reply, George!
    What I want to do is to be able to open any document in Reader, open the Addons pane, click a button and see the contents of all annotations in a textbox or pick a filename to save these to hard drive in a custom format? The latter (saving to a user-selected file) would be preferable.
    AcroJSGuide points to Adobe Dialog Manager as a way to create user dialogues, but I thought experienced users can point me in the right direction.
    Thanks,
    Stanislav

Maybe you are looking for