Is it possible to pair the playbook with the BlackBerry Visor Mount Speakerphone VM-605?

Can i listen to my music from my playbook with my
vehicle's stereo system by using the Blackberry
Visor Mount Spwakerphone VM-605?
Is it possible to pair the playbook with the
BlackBerry Visor Mount Speakerphone VM-605?

From what I've seen here and @ Crackberry yes once you've gotten the 2.0 upgrade.
Information Technology is fun! Play with IT.

Similar Messages

  • The BlackBerry Visor Mount Speakerphone VM-605 compatability ?

    For anyone who has tested this new accessory, is it compatible with other devices than a BB. One of the two phones in our house hold is the LG Envy 2. I was not sure if this speakerphone would pair with this phone also.
    Thanks

    Doesn't say only Blackberry devices. That list is Blackberry devices that it's compatible with. 
    Right above that, it says Compatible with other Bluetooth® enabled devices.

  • Is it possible to play civilization V with the macbook air

    Is it possible to play civilization V with the macbook air

    Civ V system requirements: http://www.aspyr.com/product/game_specs/125
    Check against the tech specs of your MacBook Air http://support.apple.com/specs/#macbookair
    Stefan

  • It is possible to include the jre(not the installer) with the application?

    Is it possible to include the jre(not the installer) with the application, so that the application will run on its own jre.??
    If so please provide me instructions,how to do it.
    Thanks
    Isma

    See http://java.sun.com/javase/6/docs/technotes/guides/deployment/index.html

  • Portege R600 - Is it possible to make a call with the SIM?

    Hi,
    I wonder if its possible to use the Wireless connection manager 5 and to make or receive a call?

    Hi,
    I see that nobody answered so i will try to explain what i meant -
    Is it possible to make audio call with the Wireless Manager by the GSM modem module?
    I succeed to send SMS and to connect to HSPA data services but i dont find any reason why i can not connect to the GSM and make a call.
    I have Portege R600 model PPR61E-01C00NG3
    I even succeed to use the GPS that probably installed in the GSM/HSPA modem (wireless manager 5).
    If anyone can explain how and if it possible to make a call please send your reply ... i wnat to use the laptop with BT instead of cell phone ....
    Thanks
    Yan

  • My apple keyboard had some problems, the store replaced it for me. I had to sign in to my computer, and couldn't get to pair the keyboard with the computer, as could not sign in. I know there is a command that lets you override this, does anyone know whic

    My apple keyboard had some problems, the store replaced it for me. I had to sign in to my computer, and couldn't get to pair the keyboard with the computer, as could not sign in. I know there is a command that lets you override this, does anyone know which buttons to  press.  I gather when you do this, a box comes up and pairs the two with a number you have to type in.

    Hi rpaspinall,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    Apple Wireless Keyboard: Difficulty during pairing process
    http://support.apple.com/kb/ts1569
    Best of luck,
    Mario

  • Is it possible to customize dff's with the help of form personalization?

    Is it possible to customize dff's with the help of form personalization.
    I have added few dffs in a form which users want to be customized according tho their choices.
    Can any one help me in this.

    Pl see MOS Doc 420518.1 - section 10

  • Is it possible to sync your nano with the macbook pro without losing the songs already loaded on the nano?

    Is it possible to sync your nano with the macbook pro without losing the songs already loaded on the nano?

    Not if it's not the original computer you registered it on. 
     

  • Is it possible to use 2 displays with the mac mini

    is it possible to use 2 displays with the mac mini

    I wanted an extended desktop using 2 monitors.
    I am using a Dell Ultrasharp ( has 1 VGA and 1 DVI-D) and a LG W2286 (has 2 HDMI, 1 DVI-D and 1 VGA)
    I ran into a similar issue where initially the mac would not detect the 2 displays and I thought I would share my solution.  I have a Mac Mini 10.8.2 i7 Late 2012.
    I bought a "Cable Matters" brand Mini Display Port | Thunderbolt to DVI Male Cable to have dual monitors.
    I am also using the included in the box  HDMI to DVI-D Adapter from Apple.
    Initial configuration was:
    Mini-Display (Thunderbolt connector) to DVI connected to the LG DVI-D input.
    Apple HDMI to DVI Dongle connected to the Dell DVI-D input.
    What happened was that my desktop was on the LG clear as day but OSX did not see the dell monitor.
    I called apple support and they could not figure out why the mini cant see the dell monitor. I think I discovered that the mac mini could not support 2 dvi monitors.
    I switched the monitor connections.
    The connections that works:
    HDMI out to HDMI in on the LG using a standard HDMI cable.
    Display port | Thunderport to DVI-D on the Dell's DVI-D in.

  • TS3253 My Iphone 4S version 6.1.1 will not automatically connect to my bluetooth in my car.  It is paired and registered with the car bluetooth, but I have to select the device each time the car is started.

    My IPhone 4S with version 6.1.1 will not stay connected to the bluetooth in my 2012 Subaru Outback.  The phone is paired and registered with the bluetooth in the car, but each time the ignition is turned off the phone loses connection with the bluetooth and I have to select the device again.

    You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa  I'll request that Apple relocate your post.
     Cheers, Tom

  • Is it possible to plug ipad 2 with the smart cover on the dock station?

    I'm wondering if the dock station can be used while Ipad2 is covered by the SmartCover?
    Thank in advance for answers !
    Greetings from France

    I before I bought my case for my iPad2 I had the cover on it, in order to get it in the dock I had to slightly open the cover to seat the iPad on the dock then I could close it again. There is not enough room in the cradle to hold the iPad with the cover closed (tight fit without the cover), but I did not have to remove the cover to put it in, just open it.

  • Stop the beeps with the 7200 rpm hard disks of the MacBook Pro

    http://www.hardmac.com/news/2009/07/13/stop-the-beeps-with-the-7200-rpm-hard-dis ks-of-the-macbook-pro
    Stop the beeps with the 7200 rpm hard disks of the MacBook Pro
    from HardMac.com by [email protected] (Lionel)
    At the beginning of week, we have spoken about the unpleasant beeps made by the 7200 rpm hard drive proposed as an option in the MacBook Pro 2009.
    A solution has been found, the details are given by Rémy.
    These tedious beeps occur when the disc is inactive and are caused by a system
    to reposition the play-back head carried out in a repetitive way.
    In addition to the beeps of the hard drive, Mac OS X displays the pretty multicoloured wheel during some seconds while waiting for hard drive to finish these loadings and unloadings of the play-back head.
    The solution comes with a utility of the name hdapm (for Hard Disk Advanced Power Management) which makes it possible to change the level of energy management (APM) of the hard drive.
    Hdapm can be downloaded from : http://mckinlay.net.nz/hdapm; hdapm being a command line utility, it is thus necessary to use the Terminal (which is in /Applications/Utilitaires).
    After copying hdapm into your user file, the command to enter is:
    sudo ~/hdapm disk0 max
    disk0 corresponds to the disc to regulate knowing that hdapm should function with any ATA disk supporting APM
    max is the level of APM which is a number ranging between 1 and 254 included
    the word following are preset and can used in the place a number for the level of APM
    max (maximum performance) is the parameter to use to eliminate the “beeps”.
    min (maximum economy of energy)
    default (returns to the default setting)
    The level of APM is a temporary adjustment in the firmware of the hard drive, this adjustment is lost when the disk is powered down and it is thus necessary to redo this at each for each start up.
    To install hdapm so it is launched at each start-up, it is necessary to copy hdapm to the hard drive (/usr/local/bin is advised) and to copy the file hdapm.plist in /Library/LaunchDaemons.
    It will be can be necessary to you to edit hdapm.plist with the desired parameters; the default settings are: the repertory where hdapm is /usr/local/bin, the hard drive is regulated on the first (disk0) and the level of APM is the maximum.
    You can simply copy the file hdapm into /usr/local/bin file if you want to avoid modifying Plist.
    Simplest way to reach these files is to use the Go/go to the file and to copy/paste this address before validating.

    Yeah, I don't buy that. I spoke with Seagate a couple of months ago when I was looking for the impossible to find 500 GB 7200 RPM HD and asked them that very thing. They told me it would work fine, but I should disable SMS. Apple told me the same thing. I ultimately waited and got a non G-Force model, but Seagate told me it would work.
    I also don't believe that they'd OEM the drive to Apple knowing it wouldn't work. That makes absolutely no sense. If Seagate knew the G-Force drive would not function properly in an Apple MacBook/MacBook Pro, and they OEM'd it to Apple for that purpose anyway, what does that say about Seagate?
    I admit it's odd that the used the G-Force model given the presence of SMS, but apparently Seagate has prioritized the manufacturing of the G-Force drives and probably offered it to Apple.

  • My Apple id was disabled and had to make a new one for iTunes but it's not letting me erase then re download the app with the new Apple ID

    My Apple id was disabled and had to make a new one for iTunes but it's not letting me erase then re download the app with the new Apple ID   Just got an iPad air 2 so my iCloud and family sharing is with the one that's disabled. Which I don't know how to switch to my new one, so I trying to erase my apps that won't load and just re download them with my new ID that is being used with the iTunes n app store but I can't even find most in purchased plus it's saying that I can't get it cuz that ID is not with family sharing but I donT know why it would not be. Please someone help.

    OOk so I have my new Apple id in my iTunes account but my old Apple ID is the one that is in the iCloud account which is the Apple ID have been using for years and the reason I cannot get it on this abled is because somebody was using my credit card or debit card that was on file for family sharing and it was a stolen iPhone from my account so they had to disable my Apple ID and I could not use my debit card anymore on any Apple ID ever again they said because of it so I can't get it not to be disabled and I can't sign into iTunes with it I already have signed out and signed in with my new Apple ID for iTunes it's just iCloud is not letting me load anything so pretty much what I've been doing is I have to erase every app and then re-dumb going to iTunes and re-download the apps again but the only issue is that I still have a disabled Apple ID as my iCloud settings and my iCloud family sharing in all of that so I'm wondering how or is it possible to change my Apple ID for iCloud specifically because when I go into Icloud and settings and go into my name where my Apple ID is the one that's disabled it doesn't say anything about log out or sign out or anything like that it just says to put the password for it so is there a way to change the Apple ID for my iCloud so that my iTunes in my iCloud is the same Apple ID?

  • I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands

    I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands such as Command R, Holding down the Option key, C and holding down shift at the start up but nothing happens.
    initialy All I was trying to do was downgrade 10.7 to 10.6 .

    You have to consider the possibility the hard drive may be dying.    If your data isn't backed up, try one of the tools below:
    https://discussions.apple.com/docs/DOC-1689
    Once you are sure your data is backed up, we can examine other possibilities.  In the meantime call AppleCare for your original installation DVDs.  You may need them.

  • My Mac book pro gets to the screen with the apple logo with a spinning loading symbol and an actual loading bar underneath it and when the loading bar gets to about 1/2 - 3/4 the computer shuts down how do I fix this?

    Need it fixed asap

    Unfortunately for that it's usually not a quick fix, unless it's a stuck firmware update.
    Hold the power button down to force a hardware shutdown and boot again, if it appears again then it's a bigger problem.
    The bigger problem is that the fsck drive repair at boot can't fix the problem with the drive.
    You will need to consider your off machine backup situtation if you have one or not and how recently backed up are those files.
    If you have no backups or desperatly need to get files off and willing to possibly spend some money to do so (a powered external drive + even $100 recovery software), then it depends upon your computer skill level. If not very good then your seeking the services of a local PC/Mac tech, Apple doesn't do data recovery.
    Once you have a copy of your files off the machine, then your looking at a erase and reinstall of OS X, programs and files from backup.
    If you have a recently updated TimeMachine you can restore from that.
    If you have a bootable clone, then it's easy. Just hold option/alt key and boot from it, grab your files, erase the drive and reverse clone your problems away.
    Gray, Blue or White screen at boot, w/spinner/progress bar

Maybe you are looking for

  • IMac CD with mini-DVI - Video adapter woes

    I bought a mini-DVI to video adapter when I first got my iMac Core Duo. I never used it, and so a few weeks ago I was distressed to find out that it didn't work. So I ordered another, assuming the cable was the problem. Nope -- this one has the same

  • Material num truncated while downloading the data into excel in ALV GRID

    Hi, I developed a report with ALV GRID display. The reoport is having Material number as one of the column. The report shows the total 10 digit material number. When i tried to downlaod the report into an excel sheet or a TXT file, material number in

  • Problem Backup ( error 4027)

    Dear all, I am facing some problem in SAP Backup through DB13. Backup has failed at the end. But through SQL Server enterprise manager backup is working fine backup option also working. I have tried few option such as insert new tape for backup, sele

  • Help using time machine with a macbook pro

    Can you force a backup to time machine? I have a laptop & it is not always connected to the external hard drive or not always on. I want to just backup every day or so at my convenience. whenever I connect it now it does not even show a scheduled tim

  • Adding spaces in comma-delimited lists

    I'm pulling from a database comma-delimited db that appears like so: Carpet,Hardwood,Tile How can I add spaces after the comma (if there's commas at all)?