Is it possible to pass parameters from a html to webforms ?

i4m looking for a possiblity to pass (user-defined) parameters from a html page (which includes the applet call + the standart parameters etc.) to the webform.
after passing how to find them inside my webforms ...
thx in advance
regards
null

i found a solution.... :-)
just create a parameter inside the form and pass the value together with the formcall in the "module" parameter....
null

Similar Messages

Passing parameters from a browser URL to Flash

Flash CS3, AS3
Is there any way to pass parameters from the URL line in a
web browser to actionscript?
ie. so if you had something like the following URL link in
the browser...
http://www.somedomain.com/someswf.swf?var1=10&var2=false
...it would pass var1 and var2 to someswf.swf.
(Hypothetically, of course - I'm unsure as to the necessary syntax)
Is this possible? Or would I need some intermediary software?
Thanks
Rick

i answered a very similar forum query a few days ago
here
You need to look into loaderInfo.parameters.

Passing parameters from an URL to a WAD Web Template 7.0

Hi guys, I need to pass parameters from an URL to a web template created with WAD 7.0. We need to open a template with certain filters starting from a link button located on an Xcelsius Dashboard. Our customer wants a web template to be opened with the filters defined within the Xcelsius
The idea is to run the template with the filters defined in the URL. I know this was incredibly easy with WAD 3.x, but I didn't find any suitable solutions to use with WAD 7.0.
What is the easiest way to do this with WAD 7.0?
Thanks in advance and regards.
Fabio Cristi

Hi,
It is possible in 7.0, but unfortunately it is a lot more complicated than i 3.x. There are quite a few examples here:
http://help.sap.com/saphelp_nw70/helpdata/en/43/ef05462480025ae10000000a1553f7/content.htm
I used it in a case where I wanted to embed a Web template in a BPS application and pass characteristic filters from the BPS application to the web template - similar to your requirements. Basically you need the following just to restrict one characteristic :o(
&BI_COMMAND_1-BI_COMMAND_TYPE=SET_SELECTION_STATE
&BI_COMMAND_1-TARGET_DATA_PROVIDER_REF_LIST-TARGET_DATA_PROVIDER_REF_1=DP_1
&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-SELECTIONS-SELECTION_1=SELECTION_INPUT_STRING
&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-SELECTIONS-SELECTION_1-SELECTION_INPUT_STRING=PDS06
&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-CHARACTERISTIC=0D_PH2
I could only get it to work with one characteristic and I suspect, that the reason is that the URL simply gets to long (very quickly). You have to repeat the above for every characterstic you want to use :o(
Hth,
Jacob

Passing parameters from Java to an Oracle proc

I am passing 3 parameters from Java method to an Oracle function.
The Java method is called getStatic(String szparams) which invokes oracle function
getStatic("GB1000");
Oracle procedure
SELECT XMLELEMENT("Underlying",
XMLELEMENT("Code",a.code))
FROM underlying a
WHERE xml.extractval(a.xml,'/tables:underlying/tables:isin/text()',xml.getns('NS_TABLES'))=':arg1:' Passing 1 parameter works fine.
2)Now I need to pass 3 parameters to the same function
getStatic("GB1000\i\common");
Oracle procedure
SELECT
XMLELEMENT(":arg2::Underlying", XMLATTRIBUTES(a.code "value", ':arg3:' as "xmlns::arg2:", 'http://www.AAA.com/common' as "xmlns:common"),
XMLELEMENT("common:Code", a.code),
FROM
table a
WHERE
a.code = ':arg1:'Passing 3 params doesnt work.
I tried using this way also:
getStatic("GB1000\\i\\common"); -- still doesnt work.
Is there a specific format where you can pass 3 parameters to the same method in Java?
No offence meant,as this may sound silly.
Thanks,

Hi Nitin,
yes, it is possible to pass parameters as URL parameters to the WDA applivcation. In WDA, for the handler method of your windows default Inplug (in standard the method is named HANDLEDEFAULT) define the parameters that you like to receive thru URL. When defining the WDA application, you can also set default parameters to avoid a dump, when parameters are not provided via URL.
I just tried it out, it works.
Kind regards
Andreas

Passing parameters from Design Studio to Explorer

Is it possible to pass parameters (filter selections) from Design Studio to BO Explorer?
Thanks,
Anders

Hi Andres,
I could figure out the solution for all these options.
I used if-esle statement to handle the blank parameter values
To pass multiple values for the parameter, I converted the "; " separator to _]_ so as to convert the list in the format recognized by Explorer. Note that there is a space after ;
To pass multiple parameters, I used the syntax "_;_" to include the second parameter in the url (refer to the last else statement in the below mentioned code)
Hope this helps in case you haven't found any solution yet.
//specify global variables for each filter and capture the filter selections in them
var1=DS_1.getFilterText("Dim1");
var2=DS_1.getFilterText("Dim2");
//Use below mentioned code for the On Click event of the button
if (var1.length <= 0 && var2.length <= 0)
 APPLICATION.openNewWindow("http://xxxx:8080/BOE/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=Aecg_Tff_55Oon3UKgf2BZ0");
else if(var1.length <= 0 && var2.length > 0)
 APPLICATION.openNewWindow("http://xxxx:8080/BOE/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=Aecg_Tff_55Oon3UKgf2BZ0&fans=Dim2(Text)_:_" + Convert.replaceAll
(DS_1.getFilterText("Dim2"), "; ", "_]_"));
 else if(var1.length > 0 && var2.length <= 0)
 APPLICATION.openNewWindow("http://xxxx:8080/BOE/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=Aecg_Tff_55Oon3UKgf2BZ0&fans=Dim1(Text)_:_" +
Convert.replaceAll(DS_1.getFilterText("Dim1"), "; ", "_]_"));
 else
 APPLICATION.openNewWindow("http://xxxx:8080/BOE/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=Aecg_Tff_55Oon3UKgf2BZ0&fans=Dim1(Text)_:_" +
Convert.replaceAll(DS_1.getFilterText("Dim1"), "; ", "_]_") +
 "_;_Dim2(Text)_:_" + Convert.replaceAll(DS_1.getFilterText("Dim2"), "; ", "_]_"));
Thanks & Regards,
Tushar

Is it possible to pass parameters through eventlisteners?

Hello everyone!
Inside a .fla file I have some buttons and each button will tween a different image to the stage. All the images are outside the stage in the same x and y position and I just need to tween the x coordinate.
Now I'm working with an external document class where I'm trying to hold all my functions and I'm stucked with the Tweens. I'm willing to stay away from the flash tween engine and I'm trying to work with tweenLite.
My question is: Is it possible to pass parameters through eventListeners so I can use something like this inside my docClass?
 public function animeThis (e:MouseEvent, mc:MovieClip, ep:int):void { //ep stands for endPoint.
 TweenLite.to(mc, 2, {x:ep});
If this is possible, how am I supposed to write the listeners so it will pass the event to be listened for AND those parameters? And how to build the function so it will receive those parameters and the event?
If this is not possible, what's the best approach to do this?
Thanks again!

So, I understand you need to match buttons with corresponding visuals.
Here is a suggested approach.
Since SimpleButton is not a dynamic class, I suggest you have an enhanced base class for these buttons that extends SimpleButton. What is enhanced is that button has reference to the target.
I wrote code off the top of my head and it may be buggy. But concept is clear:
This is base class for all the buttons:
package
 import flash.display.DisplayObject;
 import flash.display.SimpleButton;
 public class NavButton extends SimpleButton
 public var targetObject:DisplayObject
 public function NavButton()
Now, this is your doc class that utilizes this new buttons:
package
 import flash.display.DisplayObject;
 import flash.display.MovieClip;
 import flash.display.Sprite;
 import flash.events.Event;
 import flash.events.MouseEvent;
 public class DocClass extends Sprite
 private var btnArray:Array;
 private var visuals:Array;
 // references to objects being swapped
 private var visualIn:MovieClip;
 private var visualOut:MovieClip;
 public function DocClass()
 if (stage) init();
 else addEventListener(Event.ADDED_TO_STAGE, init);
 private function init(e:Event = null):void
 removeEventListener(Event.ADDED_TO_STAGE, init);
 // buttons and MCs shouldn't be in the same array - otherwise it is counterintuitive
 // assuming all the objects are on stage
 btnArray = [price_btn, pack_btn, brand_btn, position_btn];
 visuals = [g19_mc, g16_mc, g09_mc, g04_mc];
 configObjects();
 private function configObjects():void
 var currentVisual:MovieClip;
 var currentButton:NavButton;
 for (var i:int = 0; i < btnArray.length; i++)
 currentVisual = visuals[i];
 // hold original positioin
 currentVisual.hiddenPosition = currentVisual.x;
 currentButton = btnArray[i];
 // set target MC
 currentButton.targetObject = currentVisual;
 currentVisual.addEventListener(MouseEvent.CLICK, placeObject);
 currentButton.addEventListener(MouseEvent.CLICK, placeObject);
 private function placeObject(e:MouseEvent):void
 // if NavButton is clicked - make new visual targeted for moving in and currently visible object subject for moving out
 if (e.currentTarget is NavButton) {
 visualOut = visualIn;
 visualIn = NavButton(e.currentTarget).targetObject;
 else {
 // otherwise - move visual out
 visualOut = visualIn;
 swapVisuals();
 * Accompishes visuals swapping
 private function swapVisuals():void {
 if (visualIn) TweenLite.to(visualIn, .3, { x:0 } );
 if (visualOut) TweenLite.to(visualOut, .3, { x:visualOut.hiddenPosition } );

Is it possible to pass variables from Tidal to the Peoplesoft run controls?

Does anyoen know
•1) Is it possible to pass variables from Tidal to the Peoplesoft run control page such as current date?
An example would be updating run control parameters for a PSQUERY.
•a) From date
•b) To date
•c) Business units
Thanks,
Jay

Edit the job - go to Run Controls Parameters tab - select the param you want in the Override column then click on the Variables button on the bottom and select the variable you want

Pass parameters from hbj link

Hi,
I want to pass parameters from hbj link to the component where the event method is going to be called. And also when I click the event how it is going to redirect other jsp.
Regards,
Suresh.B

Hello Reinuka,
It is possible to send parameter to Web Dynpro iview.
In the iview application parameters add Param1 =.
Place this code wherever you want to call that iview.
WDPortalNavigation.navigateAbsolute("ROLES:"+iview,WDPortalNavigationMode.SHOW_INPLACE,(String) null, (String) null, WDPortalNavigationHistoryMode.NO_DUPLICATIONS,(String) null,(String) null,"Param1 = ");
"ROLES:"+iview=Iview Path
"Param=Paramvalue"=Parameter and its value
Youcan receive the value as
String parmvalue=WDWebContextAdapter.getWebContextAdapter().getRequestParameter("Param");
Regards,
Sridhar

Passing parameters from one channel to another

Hi,
I was wondering if it is possible to pass parameters or values from one channel to another, for ex. through JSP, etc.
Thanks, Pablo

try these topics
http://swforum.sun.com/jive/thread.jspa?forumID=80&threadID=19222
http://swforum.sun.com/jive/thread.jspa?forumID=80&threadID=23051
and maybe
http://swforum.sun.com/jive/thread.jspa?forumID=80&threadID=19222
I use javaBeans or SSOToken to exchange parameters between portlets.

Passing Parameters from Forms to Discoverer

Hello Everybody,
Is there a way to pass parameters from Oracle Forms to discoverer 4??
I want to call Discoverer from a Form and pass parameters to a sheet.
Thanks

Hi,
I don't have 10g right now, so can't test it...
Isn't it possible to just put the params you won't show to your users 'behind' other objects on the param form?
Strange behaviour anyway, in 6i Reports does not seem to care wether the params are on the form or not.
Rgds,
Guido

Passing parameters from REPORTS to FORMS.

Hi,
Could anyone help my on this, I'm trying to pass parameters from reports to forms is it possible? could anyone give me an idea how do I have to proceed.
thank youk,
bino

http://technet.oracle.com:89/ubb/Forum4/HTML/009647.html

Pass parameters from JSP Dyn Page to WDJ Application

Hi,
I am trying to pass parameters from my JSPDyn Page to WDJ Application.
I am using NWDS 7.1 EHP1
My code is :
function to_WEBDYNHK()
      EPCM.relaxDocumentDomain();
      EPCM.doNavigate
    ('ROLES://pcd:portal_content/Himanshu.Himanshu/TestDynUIApp?DynamicParameter="hkparam%3Dqwertyuio"');
This method is being called on click of a button.
hkparam is the parameter in question.
The JSPDyn page is an iView and the WDJ application is a page and both have been assigned to a role.
In the properties of the WDJ Page, I have removed DymanicParameter from "Do not Forward These Parameters To Web Dynpro" property.
However I am getting null as the value of hkparam in my WDJ application.
The code used is :
IWDRequest request = WDProtocolAdapter.getProtocolAdapter().getRequestObject();
       String param1= request.getParameter("hkparam");
What seems to be missing here.
Please help.
I went through the documentation on SDN but it does not seem to help.
TIA,
Himanshu

Hi Himanshu,
Try this code.
EPCM.doNavigate("ROLES:portal_content/Himanshu.Himanshu/TestDynUIApp?hkparam=Dmypass1123")
if the parameter is hkparam and the value to be passed is Dmypass1123. You need not change any design time property of the WD page, and WDProtocolAdapter should retrive the parameter.
Regards,
Vishweshwara P.K.M.

How can I pass parameters from one process flow to another process flow?

How can I pass parameters from one process flow to another process flow (sub process) in warehouse builder? let me know the steps I have to do in warehouse builder.
Thanks in advance,
Kishan

Hi Kishan,
Please post this question to the Warehouse Builder forum:
Warehouse Builder
Thanks, Mark

Passing Parameters from One Screen to Another Screen

Hi All,
I need to Pass Parameters from one Module Pool Screen to Another Screen.
I have two Parameters in First screen. I don't want to use Export and Import
The first screen record should sit in the Second Screen as it is.
Please suggest me.
Thanks and Regards,
Prabhakar Dharmala

An Idea,
Create a function group, in that define global variables. Then create two function module. Pass variable from one function module and get in the another one.
Hope this will help you to solve. If you need further help I will create and sent you a test code.
Darshan.
Pl. Reward points to the helpful answer, it motivates us to answer more

Automatically Pass Parameters From Crystal To SAP B1

So, I've searched extensively, and haven't been able to find an answer to my unique issue.
This question pertains to linking a Crystal Report by parameter values to the OWOR table in SAP B1, and automatically passing those parameter values from the active record in SAP. Several other tables are used in sql joins, but the report is generated from an OWOR production order. I should start by stating that the report works great when manually populating the parameter fields when SAP calls for them.
Overview:
I've written a report in Crystal that contains several sub reports, some of which are looking to the DocEntry field as the parameter (DocKey@) and others that do not look to the DocEntry field at all - but rather use another field on the form to pull up information that spans more than just that one production order. I've chosen to upload as a layout in SAP (as that is all I've worked with up to this point, and it seems it needs to be to automate from a production order); but as I continue to research, it appears DocKey@ is mandatory when uploading as a layout, and in order to view the report from the actively selected production order, it must be a layout. Does that mean the parameter is required in all sub reports? Is it required in any sub report?
I have two main issues that I need to hurdle for this report to work how I would like it to:
1. Three of the eight Commands (one main command and seven sub-report commands) use the DocKey@ as the parameter to pass from SAP back to Crystal. The main report command, as well as four of the sub reports/commands are looking to another field in the OWOR record - which happens to be a re-seller defined field (UDF). For all intensive purposes, let's call this field BatchID. I'm assuming the sub report commands run in succession, one after the next. The reason I need to use BatchID as the parameter to pull from the record, rather than DocEntry, is there are other records that contain the same BatchID, and I want all of the info pertaining to that BatchID to populate on the report.
Q1: The first command containing DocKey@ is automatically populated by SAP, and the user does not have to key that one in. However, the next two DocKey@ parameters do not automatically populate, and the user is asked for those values. How can I fix this?
Q2: How can I automate the passing of BatchID so the user does not have to fill it in 5 times when they wish to preview the report(layout)? Can I link ObjectID@ to any field in OWOR? Is there any other way like creating a stored procedure or something , to automate the passing of that variable from the SAP active record to the crystal report - so the user doesn't have to key it in several times just to pull up the report?
Thank you so much for even reading, let alone helping me with this issue!!
Cheers,
Nick

 Hi
 I had the same problem. Take a look at this newsgroup article on the businessobjects
 website :
 http://support.businessobjects.com/library/kbase/articles/c2015264.asp
 Grieg
 "Rada Pickens" <[email protected]> wrote:
 >
 >Hi,
 >
 >I'm getting the same error message, I was wondering if you fixed the
 >problem.
 > I'm stumped, can you help?
 >
 >Rada
 >
 >
 >"JAI" <[email protected]> wrote:
 >>
 >>I am passing parameters, from the JSP page to Crystal Report, i took
 >>the code from
 >>the below mentioned url, i dont know, it is something wrong with the
 >>jsp page
 >>or crystal report.
 >>i have created parameter field in crystal report to receive the value
 >>from the
 >>jsp page.
 >>If u r not clear with the error, please reply to me.
 >>
 >>i took the code from the below mentioned page
 >>
 >>reference page:
 >>----------------------
 >>http://dev2dev.bea.com/trainingevents/webinars/012804_faq.jsp
 >>parameterFieldsViewReport.jsp
 >>
 >>
 >>error displaying in the jsp page
 >>-----------------------------------
 >>com.crystaldecisions.report.web.viewer.CrystalReportViewer
 >>Some parameters are missing values
 >

Is it possible to pass parameters from a html to webforms ?

Similar Messages

Maybe you are looking for