Is it possible to pay in other currency that the AP invoice currency?

I have ebs 11.5.10, I need to pay an invoice in other currency that the invoice currency. Is it possible?
When i migrate to Release 12 i can do the same?
thanks a lot
Daniel

Hi.
The answer is no. You cannot pay an invoice using a different currency from the one which has been used to enter it. The exception goes to (EURO) currencies which have a fixed rate between them.
I believe that still in R12 that will not be also possible but you better make further research.
Octavio

Similar Messages

  • Is there a way that you can copy and paste blade effects from one clip to the other so that the cuts are an exact duplicate of each other?

    Is there a way that you can copy and paste blade effects from one clip to the other so that the cuts are an exact duplicate of each other?

    The same cuts that I have in this clip that i performed with the blade tool, I want to duplicate, copye, paste and apply to another clip. I want the cuts to mimic and be an exact same. I wish i could highlight the clip, click copy and then highlight the other clip and then click paste and the cuts apply.

  • HT204347 is there any other place that the serial # for a MacBook Pro can be found?

    Is there any other place that the serial # for a MacBook Pro can be found. I purchased this on Ebay and it functioned fine for 6 months and then it comes on with a blank screen.

    On mine at least, it's etched into the bottom cover. It's very tiny and on the screen hinge side of the casing.

  • Is it possible to organize photos into years that the photo were taken?

    Is it possible to organize groups of photos by the year that the photo was taken (in the same way as the old iPhoto 6)?

    With newer versions of iPhoto you can use the serarch function at the bottom and select year to view all the photos of a specific year:
    Use the forward and back arrows to get to the year you want.  Click on the year to get all photos for that year.  Click on a month to get the photos in just that month:
    OT

  • Is it possible to trigger an error so that the running stored procedure is stopped?

    Hello all,
    I want to run an existing stored procedure and then I want to manually trigger an error/abort/interruption so see what happens and do some testing with that.
    Is it possible to manually trigger an error/abort/interruption on a running stored procedure so that it is stopped?
    If yes, how can I do that?
    I hope someone has an idea. For me it sounds not really difficult, but I just do not get the idea how to do it.
    Kind regards
    Peter

    Hello Visakh,
    I dont want to modify the existing procedure. I just want to run it and than stop it, but not with the button to stop it, but "kill" it somehow with an error (with not destroying the database).
    Nope you cant simulate an intermediate failure inside procedure code from outside. For that you have to modify the actual sp code itself
    Another way is by doing data manipulation in such a way which causes a error in procedure but for that you need to revisit the logic to ensure you do changes in such way as to cause an error
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • Is there any way I can order larger size print in other size that the 8*10 or 16*20 ?

    I believe most of us use a DSLR which have a 2/3 censor, and those 8*10 or 16*20 do not respect the size of the pictures we take...
    I hate to have to specific files to get prints in a reasonable size. A good print size would be a 8*12, 12*18 or 16*24 (i don't always need a 20*30 print)
    I truly believe that having this option would make a lot of sense for most of aperture users using a DSLR and shooting in raw.
    Thanks for the feedbacks.

    OH MY! THAT WAS RIGHT IN FRONT OF ME THE WHOLE TIME!!
    THANKS A LOT!!

  • Other programs on the Touch?

    Does any one know if it is possible to run any other programs (besides the ones apple includes) on the new ipod touch? Specifically, I am hoping it would be able to run a few programs for PDA and Palm Pilots. I'm a med student and I have been holding out on buying a PDA with hopes that apple would come to my rescue and create one....but no luck yet! So if anyone knows if programs like epocrates, or merkmedicus, or any other PDA/Palm programs will run?
    PS And can you download things from webpages and have them saved to the ipod?

    Two things:
    1) The Touch has not been jailbreaked yet, and until this happens nothing can be loaded onto it such as third party apps.
    2) Even if the Touch is jailbreaked, the apps you mentioned, such as eopcrates, have to be written and compiled for the Touch OS. As of right now they have not been.

  • Hello,  Recently, I asked about the possibility of swap the Adobe Design Standard CS5.5 from windows to mac. In response, I was directed to the help page and and i know that it is possible. Today I see that the help page is out of date. How cann I now swa

    Hello
    Recently, I asked about the possibility to swap from windows to mac with Adobe Design Standard CS5.5. In response, I was directed to the help page and i know that it is possible. But today I see that the help page is out of date.
    How cann I now swap platforms for Adobe Design Standard CS5.5? Do I realy need to buy CS6? Or afer dowloading the mac version of CS5.5 I get the key. And if I realy need upgreade the CS5.5 cann I use the Mac version of CS6 for the dowloaded mac version of CS5.5? Is it possible?

    Thanks !
    I didn't know that I cann buy CS6 Mac upgrade in Adobe Store.
    So I have only to buy the CS6 Mac versions and upgrade CS5.5 Win to CS6 Mac?
    How does look the procedure?
    Do I need to install first the CS5.5 Mac on my Macbook and then upgrade it or is it not necessary?
    Thanks
    Langosz

  • HT2736 Is it possible to pay for an album half by voucher and other half by card?

    Is it possible to pay for an album half by voucher and other half by card?

    You should be able to - if you don't have enough balance on your account then the remainder will be taken from your credit card.

  • How to pay a forign currency invoice in another currency payment in R12

    Hi,
    I have Oracle R12.06.
    How to allow cross currency payment, for example :
    I have an invoice in USD , i need to make an payment for that Invoice in EUR or any other currency sometimes functional currency.
    I already check the allow Multiple currency Payment for all bank accounts and also allow multiple currency in Payable options ,BUT I still not allowed to pay any invoice in different currency.
    Regards.

    Please note the following in respect of payment in foriegn currency other than the functional currency:
    Invoice and Payment Currency.
    Payment Region – Type - If the Payment Currency is different from the Invoice Currency and both are fixed-rate currencies, Payables displays EMU Fixed. If the invoice and payment currencies are the same, you cannot enter a value in this field.
    If the payment currency is different from your functional currency, enter exchange rate information in the Payment Rate field.
    You can pay invoices in a different currency only if the currencies are related fixed-rate currencies – EURO BASED CURRENCIES
    In all the other circumstances other than above the invoice currency and payment currency has to be the same.
    They cannot be different,
    Hope this helps.
    Thanks
    Manish Jain.

  • I Am from Brasil and december last year i bought a non contract iphone in usa but it still locked, now apple is sending non contract unlocked iphone, next week i am going to usa and would like to know if it is possible to pay and unlock my iphone in usa

    I Am from Brasil and december last year i bought a non contract iphone in usa but it still locked, now apple is sending non contract unlocked iphone, next week i am going to usa and would like to know if it is possible to pay and unlock my iphone in usa

    A no-contract sales price does not mean unlocked.
    Apple is now selling an officially unlocked iPhone in the U.S. which has nothing whatsoever to do with AT&T unlocking iPhones. It is up to the carrier and the carrier only to officially unlock an iPhone that was sold as carrier locked with the carrier - in this case sold as carrier locked with AT&T. This may change one day, but at the present time AT&T does not unlock an iPhone for any reason or under any circumstances.

  • How we can get the Trial balance in other currency -USD now.

    Hi All,
    I have an issue reg: My client  had gone live in 2005 and only One Currency is defined u201CINR u201D as company code currency and Controlling area currency.
    Controlling area settings are maintained as: Controlling Area Same as Company Code and Currency Type maintained is: Company code currency u2013 INR.
    Even in OB22, No parallel currencies (Group currency, Hard currency, Index based currency, Global company currency) are defined.
    Now, my client is asking to have the Trial Balance (F.08) in currency u201CUSDu201D,but at present we are getting it is "INR" only.
    Is it possible to get the Trial balance (F.08) in USD , for the previous posted document values(They did all the postings in INR only)
    How we can get the Trial balance in other currency -USD now.
    Please suggest and guide.
    Thanks in advance
    Regards,
    Sudha.

    Hi,
    First you need to enter USD as HARD CURENCY for your company code's country settings.
    Then in OB22, for your Company code, enter Currency type 40 as additional local currency (LC2)
    Legal Valuation
    Exch rate type M
    Sour Curr 1
    TRs Date Type 2 ...and now save.
    By making these changes, you will be getting F.08 in USD by specifying currency type as 40 in the selection screen of this report.
    The only thing you wont get here is that.............you cannot determine USD values for documents, which are already posted into the system.
    For the time being...you can use report S_ALR_87012279 - Structured Account Balances....in this selection screen enter USD as output currency, tran key date and exch rate type M....to get the LC values to be converted into USD during this report only. (this is as good as fast food)
    As suggested above, use of special purpose ledger is all together a different concept....you dont need to go for it.
    Regards,
    Srinu

  • Is it possible to pay for iCloud storage plan with money from iTunes?

    Is it possible to pay for iCloud storage plan with money from iTunes?

    Hey LARISAFROMTX,
    Thanks for the question. Yes, you can use iTunes Store credit to pay for an iCloud storage upgrade:
    Accepted payment methods for iCloud storage upgrades include credit cards, debit cards, and iTunes Store credit. If you don't have enough iTunes store credit to complete your upgrade, you'll be charged the remaining amount. Apple Store gift cards are not accepted as payment for upgrading iCloud storage.
    Learn how to upgrade or downgrade your storage and manage the amount of storage you're using.
    iCloud: Storage upgrade pricing
    http://support.apple.com/kb/HT5879
    Thanks,
    Matt M.

  • In APP how to make customisation so that the APP pay only one currency invo

    Hi,
    Please let me know the settings:
    for  App has to pay only one currency invoices.
    ex. we have invoicess with 3 currencies like INR , USD and GBP  but the APP has to pay only GBP invoices.
    local currency is INR.
    please let me know the customisation for the same.
    Thanks
    Jagadeesh

    Hi,
    In T Code F110 , go to free selection screen,  select the "field name" - Currency (BKPF-WAERS) from "Document" and in the Values, you can enter the INR or any one or multiple currencies by putting , for seperator. Now you can run the program asusual.
    In this case, documents will be selected for payment only your currency mentioned in the field "Values"
    There is an exclude check box also.  This excludes the value mentioned over there.  In your case, do not check this box.
    Hope it helps
    Saravanan.A

  • Is it possible to pay for more than one year of membership in advance? Would I be able to pay for 3 years at one time?

    Is it possible to pay for more than one year of membership in advance? Would I be able to pay for 3 years at one time?

    In individual CC the maximum purchase can be done for 1 year,
    However: An Enterprise Term License Agreement (ETLA) is ideal for organizations that manage large deployments of Adobe software and prefer a direct relationship with Adobe. An ETLA provides custom software licensing options and pricing for volume purchases, access to advanced customer support programs, and streamlined IT administration tools to package and deploy Adobe apps and services across the enterpris with an agreement of three years.
    Business Enterprise Term License Agreement | Adobe Buying Programs
    http://www.adobe.com/volume-licensing/education/enterprise-term-license-agreement.html
    Regards
    Rajshree

Maybe you are looking for

  • Photoshop update in Adobe Creative Cloud fails

    Each time I open Adobe Creative Cloud there is an update for Photoshop. When I click on the update it is downloaded and the install process starts. When the installation of the update reaches 100%, the update always fails saying install error. Any id

  • Mandatory field required in PCUI Account Management

    hi gurus,            i am on CRM project with PCUI as front end interphase. my requirement is to have a mandatory field in Account management. for ex i want have First name and Search term to mandatory fields with Red Star(astrich)  against these two

  • Best Insightful PSE8 Tutorial?

    What is your recommendation for a one stop global tutorial for PSE8 ? Sure there are numerous video tutorials around, but none that I have found systematically take you through each of the tools and features explaining the use of each of the optional

  • Automate SQL Connect in essbase

    Is there a way to automate the connection to SQL database while retrieving the data in essbase during rules file build. So everytime I have to update the metadata or fact data I won't have to type in the username and password for the SQL Data Source.

  • How to do this zsh script in bash?

    Some things I really like about this: a) the flexible case. it doesnt matter how your menu called $pmt looks like, it will always match by numbers (this is what the prompt function does) b) the pid file for screencast and stopRecording c) the dynamic