Is it possible to perform a backup with a broken USB port? (Q10)

Hi there! The USB port of my Q10 does not work. (I bought it like this, knowing of the defect.) I thought it's a hardware/contact problem, but it's not: I disassembled the Q10 and tested if the contacts of the USB port are connected correctly to the PCB by measuring. (Yes, I'm an electrical engineer.) The device does not charge and it's impossible to establish a USB connection to a computer. It's also not a software issue: I factory reset the phone two times before using it. I want to buy a new Q10 and transfer all data from the old to the new phone. I thought of doing a full backup with Blackberry Link. For Blackberry Link to work I need either a USB connection or a Wifi connection. The latter only works when the Q10 is connected to a charger. You see the problem? So my questions are:- Is it possible to transfer all of the data from one phone to another without using USB? Wifi, Bluetooth, whatever?- Is it possible to do a full backup of the phone without Blackberry link?- If not, are there any apps that I can use that backup most part of my data? BTW: Blackberry blend works, but there I can't backup local calendar and other data this way, only photos and videos. Thanks for your help!

Hello,
Via Media Card, one option is a 3rd party backup app called Ultimate Backup.
For the native LINK method, my memory tells me that BT integration was not included, so that won't work. I don't know if any 3rd party tools can work that way or not.
Good luck!

Similar Messages

To add a 6 TB G-Raid (Mac os extended) ext drive to a 2Tb time capsule, using a powered usb with the TC usb port. Using the airport utility 5.6 on iMAC (10.7.3). Went to manual setup,then disk. Have options of the TC

Want to add a 6 TB G-Raid (Mac os extended) ext drive to a 2Tb time capsule, using a powered usb with the TC usb port. Using the airport utility 5.6 on iMAC (10.7.3). Went to manual setup,then disk. Have options of the TC or 6TB. Won't allow update to the 6TB

4Buck5 wrote:
Want to add a 6 TB G-Raid (Mac os extended) ext drive to a 2Tb time capsule, using a powered usb with the TC usb port. Using the airport utility 5.6 on iMAC (10.7.3). Went to manual setup,then disk. Have options of the TC or 6TB. Won't allow update to the 6TB
I am not 100% what isn't allowed.. but I am assuming you want to spread the backup across the two disks.. internal TC and 6TB external.. this is not possible.. It has to be one or the other. TC has no way to build a raid JBOD or anything else. Nor would you want to as that is the most likely to fail and kill your data.
Let me add, backing up 6TB over USB on TC.. will be the most excruciating experience of your life.. cf child birth or passing kidney stones.. large ones.. being the male equivalent.

Even after doing the recovery of my iphone 4, still i am getting a picture with itunes and usb port in phone. showing only the emergency call

I did a recovery of my iphone4. After extracting, recovery and verifying completing, my iphone restarted. But still i can only see the picture with iTunes and USB port in the iphone 4. Only the emergency call is allowed.
After recovery and re-start of my iphone4 the itunes doesn't detect my phone. What should i do now

DFU Mode and restore again, if it doesn't work, well then...I suggest you try using a custom firmware maker (sn0wbreeze), NOT for the jailbreak, just to try and fix your phone.

IPhone 6 won't play with Kenwood stereo USB port. Help !!

I have a Kenwood KDC-BT743U Stereo in my car, which has a front panel USB port. I've been able to connect my iPhone 4S and play music from my iTunes catalog as well as stream music from Pandora, Soundcloud, Tune In Radio, Mixcloud et al, without any problems until yesterday.....
Now that I've upgraded my phone to a iPhone 6 and when I connect it to the stereo via the USB port, it doesnt play at all. After about 2 minutes of trying to connect , I recieve a 'USB Error" . As I stated, I've had no problems with my iPhone 4S, which I've used with this same stereo deck for the last two years without any problem what so ever.
I'm looking for some guidance on next steps to take in order to fix the problem? Did Apple change the spec in some sort of way? Do I need to go to Kenwood for a firmware update (their website provides no information about iPhone 6 compatability with any of their stereo's which is very odd to me) ?
Please help, my life in the car during long commutes is just not the same......

Possible Solution:
1. Go to Settings > General
2. Go to Restrictions
3. Enter Passcode (possibly x2)
4. Enable Restrictions
5 Disallow CarPlay
6. Reset Network Settings (Not 100% sure if this step is needed)
7. Have at least 1 song in Apple Music App
8. Have Iphone at Home Screen
9. Connect Apple Original Cable
10. That 1 Song should start playing
11. Open Prefered Streaming App and hit Play
Carplay negatively affects USB connection with Non-Carplay USB Audio Receivers.
I have the Iphone 6 with 8.3 iOS connected to Pioneer avh-41000dvd car stereo and the above solution fixed USB audio issues, including Error code 22-65.
If you are having issues upon reconnect, disconnect and bring Iphone to home screen and reconnect.

IPod touch won't work with car's USB port after sw update

I've been using my iPod with my 2011 Honda CR-V's USB port to play my music through the car's audio system without issue since I bought the car. This stopped working after the latest iPod software update a few days ago--the msg on the audio screen says it's now "unsupported". Is there anything I can do to fix this without a full restore? Why did it change? Thanks for any help.

Hey there,
Glad to hear we're getting closer. Looks like you're connected to the network, just not able to utilize it's internet connection.
Let's check your iPod's IP addres. Tap Settings > Wi Fi and look for your network. To the right, there's a blue circle with a white arrow in it. Tap that circle. If the IP address starts out with 169.x.x.x, it is a self-assigned IP address. Since it came from the iPod, and not the router, it can't be used.
I would recommend resetting your iPod's network settings:
Settings > General > Reset > Reset Network Settings
When the iPod restarts, reconnect it to your network and try Safari again.
If it still isn't working, try powercycling your router and resetting those settings at the same time.
1. Turn off the router
2. Reset the network settings again, as indicated above
3. Turn the router back on
4. Reconnect the iPod to the network
If it still isn't working, let's check your iPod's software version.
Settings > General > About
If you've upgraded to 2.0, the latest version is 2.0.2. If you haven't upgraded, the latest version is 1.1.5. If you're not at either of those numbers, connect the iPod to your computer and use iTunes to check for software updates for the iPod.
Regarding the router settings, I'm not familiar with your router manufacturer. I'd check their website for instructions on that. I think at this point you wouldn't really need to change any settings, but just check for firmware updates.
CG

ITunes Library set up on NetGear R6100 router with ReadyShare from USB port?

Can the iTunes Library be set up on a NetGear R6100 router with it's NetGear ReadyShare feature. from a USB thumb drive or USB hard drive attached to the one available R6100 router's USB 2.0 port?
I have read the Apple forum post about a similar question for the more advanced NetGear R7000 router, which says it can work there. Unlike some of the other sibling Netgear routers that do not have ReadyShare, my R6100 does, which leads me to believe that it should work, since its the same technology (they both have a router USB port with ReadyShare). It just appears that the documentation is very limited. The other post said to format the USB drive to the Apple format (HFS+), rather than Fat32, get the Mac or Apple to see the iTunes directory located on the router's USB port.
I'd like to know if anyone has had any luck using the ReadyShare.feature on their R6100 for sharing their iTunes library to the same iTunes account on different devices (laptop, PC, AppleTV, iPod, etc). My Apple TV has recently acquired a problem of not being able to detect the iTunes library on my PC, aftert a recent iTunes update, but that's another problem that the forums show a lot of people having. So I figured that since my R6100 router has the ability to share media over the network, I would try to move my iTunes library there, hopefully to make it easier to access by my Apple TV, and make it unnecessary to have my PC running when I watch my purchased iTunes movies, that are stored in that library. Interestingly, my movie and TV show files are stored in my iTunes Music folder under the "Movies" and "TV Shows" subdirectories (folders). The way it is set up now, if I'm watching a HD movie purchased from iTunes with my Apple TV, the movie stops playing as soon as my PC is shut down, which confirms to me that the large movie files are being pulled from there to my Apple TV.

Oh groan, not another conspiracy theory. No, it's a lot more likely Apple and Netgear and the dozens of other manufacturers haven't gotten together with the thousands users who have come up with hundreds of thousands of ways of rigging things up and tested each and every one of them. I am confident if Apple were out to mess things up for you they could have come up with something a lot more devious.
Did you do a web search for this? With a Google search specifying Netgear with this error I found:
ReadySHARE USB Hard drive access issue from a Mac Computer (Time Machine or iTunes not working properly)
- Able to see USB hard drive content but unable to write to USB hard drive connected to router's Readyshare port from Mac computer.
- Error that says "The iTunes application could not be opened. Unknown error 13008"
http://kb.netgear.com/app/answers/detail/a_id/22763/~/readyshare-usb-hard-drive- access-issue-from-a-mac-computer-%28time-machine-or
In fact it is almost certain that it is an issue of that particular model router and the drive formats it can use.

I need an equipment with an entry USB port to send a wav file and exit I & Q

We are working with an equipment consisted in a transmitter and a receiver.At the end we have 2 computers,we are trying to send a wav file through USB port from one computer and converted to I & Q signal (that supports our transmitter).
On the other end we have to convert from I & Q signals to a signal who can interprete the USB port.
Our ask is if exists an equipment which could do these two fuctions.
Thanks a lot.
Attachments:
national.doc ‏34 KB

We have data acquisition (DAQ) devices that have a USB interface. You could send a .wav file to an analog output of a USB-DAQ device and you could acquire an analog signal (with analog inputs on a USB-DAQ device) and write that to a .wav file with another USB-DAQ device.
What is an I&Q signal? You need to give more information on what what characteristics are needed for a signal to be I&Q. I have included a link below to a USB-DAQ device within our on-line catalog for you to take a look at.
NI DAQPad-6020E for USB
http://sine.ni.com/apps/we/nioc.vp?lang=&cid=11922
Regards,
Todd D.
Applications Engineer
National Instruments

Re Issue with Left Hand USB Ports on my Elitebook 8560w Workstation

Hi There..
I am looking for advise on my 8560w Elitebook station runing fine on windows 7 32bit ?
My issue is I have lost all power to the three left hand USB ports ? I have not been able to check if the display ports works as I dont own a cable.
The right hand USB ports work fine !
Does anybody have any ideas please ?
Best regards
James

Hey James,
It is possible that the section of the motherboard has failed. Does anything else on that side of the laptop work properly? Have you tried using multiple devices on those ports? I would first make sure its more then one device that does not work on that side. I would then go ahead and check to make sure your BIOS is up-to-date. There was a new BIO released this year. Here is the link that will walk you through how to update the BIOS and the link to download it: HP EliteBook 8560w Mobile Workstation
Hope this helps!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I have to reinsert my seagate backup disk to another USB port on every reboot!

I have a late-2011 MacBook Pro 15" and i am using Seagate 1TB expansion drive with time machine. I keep it connected to my macbook all the time but the problem is on every boot of Mac i have to remove the drive, reconnect it to other USB port for it to show up in Finder or use it with time machine. Why wont OS X detect it if i just leave it connected to a USB port? I have OS X 10.8.2 installed. Is connecting USB 3.0 device to USB 2.0 port causing problem? My mac doesnt support USB 3.0! Any suggestions?

Incredible as it may seem, the brand new cable is damaged and dead. Given that it IS new, take it to an Apple Store for replacement.
Or just buy a replacement outright if you're rich and not up for the haggling exercise of convincing the Geniuses that their brand new toy came defective from the start.
The new Lightning cables seem to be quite a bit more fragile and delicate than the old ones.

Problems with the first USB port

Hi,
I'm having a problem with my 13 inch i5 Macbook Pro
For some reason my first USB port isn't working well, doesn't matter what, i plug in it just won't recognize anything.
But whenever I restart my mac, everything works well, and after about 2~3 days it stopps again and I have to reset or log out my mac again..
I tried to reset the SMC and the PRAM, it didn't work
This is freaking me out, I've never dropped my mac or something. It's not really old bought it in august.
I also upgraded to lion, it didn't work sadly and this problem still exists.
I'm pretty sure some people have this too, this is not an hardware issue, it's a software issue
Does anyone got any idea?
Thanks

ElectroSpyzz wrote:
this is not an hardware issue, it's a software issue
How do you know?

Trouble with all 3 USB Ports: HP Pavilion 14-v062us Notebook PC

I was recently playing a game on my computer with a mouse controlled by a USB drive. A little bit into the game, the mouse disconnected for no known reason. I have been playing this game about six months now, and have never had this problem in the past. I relocated the drive to the other two ports, but the device was not recognized in any of the ports. I plugged in another device controlled by a USB drive and got the same results. I have uninstalled the USB Composite Device and USB Root Hubs then restarted my computer to no success. Any help towards identifying and solving the problem is greatly appreciated!

Hi there @D3rr1ck,
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you are having problems with all of the USB ports on your notebook. I am happy to help with this.
Take a look through the following and try the sections that are applicable.
HP PCs - Troubleshooting USB connections (Windows 8)
Normally the USB driver is a part of the chipset drivers for a board, so you can also try updating that, which you can find on this page: HP Pavilion 14-v062us Notebook PC (ENERGY STAR) - Software and Drivers
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Possible to Get Database backup with java program

Hello
Is it possible to Get or Create Database Backup on runtime with java program using some sql statements
How could i do that
'

Cross posted and multi-posted.
Hey jackass why don't you look where I already answered this question.
http://forum.java.sun.com/thread.jspa?threadID=654902&messageID=3849575

Is it possible to share a backup with different generations of iPod touch?

For example, if I bought a new iPod touch 3rd generation and I want to put the backup of my old iPod touch 2nd generation. Is this possible?

yes it is

Is it possible to boot a 7300 with a PCI USB card with OS 8.5 on a flash drive? Thanks

Just wondering if it's possible to run a PowerMac 7300/180 with the operating system installed on a flash drive which fits into a USB PCI card? The old hard drive finally went bad and was just wondering if there was any form of flash storage alternative to purchasing a new SCSI hard drive. I have an original OS 8.5 installation CD, would that install onto a flash drive if the computer is able to recognize it? Thanks!

Unfortunately, USB support in the older "PCI" Power Macs isn't firmware-based, so it won't be found in the 7300's ROM code. If available, it's through the addition of a USB PCI card and is driver-based. You can't boot from a device, if the drivers needed for recognition of the bus (on which that device is connected) are loaded after the boot sequence has been initiated. USB flash drives are very useful for extra data storage in those old Macs, but you really need to be running OS 8.6 and download/install the "USB Adapter Card Support 1.4.1" for recognition of the PCI card itself. If running OS 8.6, I've found that the optimal database of supported USB peripherals is contained in the USB Support files, that are included in the OS 9.1 Update. The files need to be extracted with "TomeViewer" and placed in the OS 8.6 Extensions Folder. Again, this will only help with the recognition of a USB device when the computer is up and running. It cannot make a connected USB flash drive capable of booting the computer.

Is it possible to display a macbook with a broken monitor on a TV?

A little while back I broke my Macbook display screen and, as I'm sure you all know, it is extremely expensive to replace. While I am saving up to have the money to fix it permenantly, is it possible to display it on a TV with the DVI adapter even though I can see almost nothing on the macbook screen itself? I don't want to spend the extra money for the materials if it cannot be completed. Any help would be great

It is ... however, you will need to use an external mouse and keyboard. Connect the display adaptors, turn the MacBook on, and, when you've given it enough time to get to the desktop (you may or may not see anything happen on the TV), close the lid, allow it to go to sleep, then click the mouse to wake it up. It should use the TV as the main display.
Matt

Is it possible to perform a backup with a broken USB port? (Q10)

Similar Messages

Maybe you are looking for