Is it possible to perform network data encryption between Oracle 11g databases without the advance security option?

Is it possible to perform network data encryption between Oracle 11g databases without the advance security option?
We are not licensed for the Oracle Advanced Security Option and I have been tasked to use Oracle Network Data Encryption in order to encryption network traffic between Oracle instances that reside on remote servers. From what I have read and my prior understanding this is not possible without ASO. Can someone confirm or disprove my research, thanks.

Hi, Srini Chavali-Oracle
As for http://www.oracle.com/technetwork/database/options/advanced-security/advanced-security-ds-12c-1898873.pdf?ssSourceSiteId… ASO is mentioned as TDE and Redacting Sensitive Data to Display. Network encryption is excluded.
As for Network Encryption - Oracle FAQ (of course this is not Oracle official) "Since June 2013, Net Encryption is now licensed with Oracle Enterprise Edition and doesn't require Oracle Advanced Security Option." Could you clarify this? Thanks.

Similar Messages

  • About Network Data Encryption

    Hi,
    I have a DataBase Oracle 10g, I'm configuring the Advanced Security, and I would like to know if it's posible to configure the server in order to refuse the connections which do not have configured the encryption option that I have defined in the server.
    For example: in the server, the sqlnet.ora contain that:
    sqlnet.crypto_seed="dsdfrpdstrpgrmmpbmprthmtpommbmptbmpotpre"
    sqlnet.encryption_client = required
    sqlnet.encryption_types_client = (RC4_40)
    but, if the client don't have defined nothing in his sqlnet.ora can to connect with the DataBase.
    Can someone help me?
    Thanks in advance,
    Fernando.

    Roger22 wrote:
    Ok, thanks for reply
    And one more question:
    If i have
    alter system set encryption key authenticated by "ImOracle";then the encryption key is ImOracle, like the password for the wallet too? The password for the wallet is ImOracle too?
    I found this here: http://oracleflash.com/26/Oracle-10g-Transparent-Data-Encryption-examples.html
    (This creates a wallet at the location defined in the sqlnet.ora, sets the password for the wallet for TDE to retrieve the master key for encryption of table keys used to encrypt values in the tables.)First of all, try to stick with the official oracle documentation website, http://tahiti.oracle.com . Now, the encryption key is the key that is used to encrypt the data of the columns. The above command is setting the master key for the column encryption. Please see,
    http://download.oracle.com/docs/cd/E11882_01/network.112/e10746/asotrans.htm#ASOAG9525
    For the wallet, you set up a password when you set up the wallet using the oracle wallet manager so that should have prompted you for a password.
    HTH
    Aman....

  • Testing network data encryption

    Hi,
    My sqlnet.ora file contains also:
    TRACE_LEVEL_CLIENT = SUPPORT
    TRACE_DIRECTORY_CLIENT = c:\temp
    TRACE_FILE_CLIENT = sqlnet_encryption.trc
    SQLNET.ENCRYPTION_TYPES_CLIENT= (AES256, AES192)
    SQLNET.ENCRYPTION_TYPES_SERVER= (3DES168)
    DIAG_ADR_ENABLED = OFFI want to test the network encryption. I have issued a select within hr schema (select * from employees), but when i access that .trc file, i can see it contains:
    [18-DEC-2012 20:51:04:002] naeecom: entry
    [18-DEC-2012 20:51:04:002] naeecom: Encryption inactive[18-DEC-2012 20:51:04:002] naeecom: exit
    [18-DEC-2012 20:51:04:002] naeccom: entry
    [18-DEC-2012 20:51:04:002] naeccom: Crypto-Checksumming inactive[18-DEC-2012 20:51:04:002] naeccom: exit
    [18-DEC-2012 20:51:04:002] na_tns: entry
    [18-DEC-2012 20:51:04:002] na_tns: Secure Network Services is available.
    [18-DEC-2012 20:51:04:002] nau_adi: entry
    [18-DEC-2012 20:51:04:002] nau_adi: exit
    [18-DEC-2012 20:51:04:002] na_tns:      authentication is active, using NTS
    [18-DEC-2012 20:51:04:002] na_tns:      encryption is not active
    [18-DEC-2012 20:51:04:002] na_tns:      crypto-checksumming is not active
    ...I want to know why it says encryption is not active, if i used Net Manager to specify encryption algorithms for both server and client.
    I have also restarted the database (shutdown / startup), with no effect (same 'encryption inactive').
    Thanks

    Hi, Srini Chavali-Oracle
    As for http://www.oracle.com/technetwork/database/options/advanced-security/advanced-security-ds-12c-1898873.pdf?ssSourceSiteId… ASO is mentioned as TDE and Redacting Sensitive Data to Display. Network encryption is excluded.
    As for Network Encryption - Oracle FAQ (of course this is not Oracle official) "Since June 2013, Net Encryption is now licensed with Oracle Enterprise Edition and doesn't require Oracle Advanced Security Option." Could you clarify this? Thanks.

  • Is it possible to save / extract data from a MS SQL database 2008 using lookout 6.2?

    Is it possible to save / extract data from a MS SQL database 2008 using lookout 6.2?
      Now a days we are saving / extracting data in a excel spreadsheet, but we would like to do that using a database because it is better.

    You can use ODBC connection to work with SQL Server database.
    Use SQLExec object to execute the SQL statement. Here is a KB about the SQL statement.
    http://digital.ni.com/public.nsf/allkb/4ADEEA04CD24AE0B862565E20002A16F?OpenDocument
    To write data to spreadsheet is more straightforward because Lookout has built-in spreadsheet object. But you need to write SQL statement by yourself to interact with other database.
    To read the data back is the same way. Just use "select" SQL statement to query. You can use Datatable object to query.
    The "Data Source" can be "DSN = data source name;". The data source name is configured in Control Panel->Administrative Tools->Data Sources(ODBC).
    Ryan Shi
    National Instruments

  • Data encryption in oracle 8i and 9i

    Hi,
    I would like to know how data encryption in Oracle 9i
    differes from that of Oracle 9i database.
    Thanks in advance
    Shinto

    What is your national character set? What is NLS_LENGTH_SEMANTICS set to?
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • Data Sync between ORACLE and SQLServer

    Hi,
    I would like to here the possible options for "Bi-Directional Data Sync" between ORACLE 10g (Enterprise Edition Release 10.2.0.4.0) and SQL Server 7.0 (7.00 - 7.00.961 Standard Edition on Windows NT 5.0 ).
    Please let me know the available tools or any other addons.
    thanks and regards,
    Suman.S

    Are you looking for transactional replication between Oracle and SQL Server? Take a look at Wisdomforce [DatabaseSync.|http://www.wisdomforce.com/products-DatabaseSync.html]
    It can perform a [real-time change data capture|http://www.wisdomforce.com/products-DatabaseSync.html] of transactions from redo log files and apply them into Oracle or SQL Server

  • How can we do the data migration between Oracle Applications and SAP R/3.

    Hi All,
    How can we do the data migration between Oracle Applications and SAP R/3 system.What are all the possible ways to move bulk data from Oracle Apps to SAP r/3 system.
    Provide any 3rd party tools which supports data migration and also pls rpovide the SAP's own data migration tools with supports the above feature.
    Awaiting for best possible solution.
    Thanks in advance.
    Regards
    Dharmaraju

    the 3rd party tool is ETL , you can use ETL tool and the prepare the load files then you can use LSMW method to upload the data to SAP.

  • Is it possible to import and export dump between oracle 9 and oracle 11?

    Is it possible to import and export dump between oracle 9 and oracle 11?
    Source DB : Oracle 11g(unix0
    Oracle client : Oracle 9(Windows)
    Export import utility : Oracle 9's
    Destination DB : oracle 9

    I am getting the Following Error and export utility is not responding after this.
    Export: Release 9.2.0.1.0 - Production on Thu Jul 15 14:37:01 2010
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    server uses AL32UTF8 character set (possible charset conversion)

  • How to generate TPC-E schema/data sets in Oracle 11g

    Hi,
    I want to use TPC-E schema in my Oracle 11g database (Standard) and also want to use DATA SETS from this benchmark for some kind of testing.
    I've download EGen v1.8.0 from this TPC website:
    http://www.tpc.org/tpce/default.asp
    but don't know who to implement this benchmark database into my computer's database. I'll appreciate if someone please suggest me how to do this...
    Thanks alot.
    Best Regards,
    Kamran

    kamran safdar malik wrote:
    I want to find Optimal size of a data block size as this is the one parameter which can increase the performance of a database or decrease it.If there is a single optimal size, that would surely be the default Oracle block size - as Oracle should know perhaps better than any of us, just what block size differences do as it is their code that uses it?
    Can I ask why you said that you would not have chosen this topic as a thesis?My leaning has always been to expert systems and A.I. Even designed and written my own expert system language years ago. One thing that is critical in such systems is how you structure data - and that has a nice database angle to it. One that I believe can still be exploited for research purposes.
    Don't you think that it'll benefit DBA's or database developer after I reach a successful conclusion?To be honest, in the real world of database systems, the least of my concerns are data block sizes. For example, we're busy putting together a storage array that should have a maximum I/O pipe size of 40Gb. In comparison, we currently use dual 2Gb fibre channels on most of our servers for our I/O.
    Technology moves fast. And perhaps there is an ideal block size for the standard storage array and Oracle instance today - but that could invalidated by new technology next year. Would I want to spend time and effort studying and analysing and researching a very specific technical subject, that perhaps is not considered as of that critical importance by DBAs and perhaps can be outdated with new technology and techniques?
    I honestly do not want to put you off studying db block sizes. Perhaps there's still some critical issues to uncover in that respect. But personally.. there are many other subject areas in database technology that peak my interest a lot more. But then you have your personal preferences and likes and dislikes - and data blocks could be your muse. :-)

  • Who worked with ICS' Model 4896 GPIB? I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

    I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

    Hello. Most of the engineers in developer exchange are more familiar
    with NI products. Contacting ICS for technical support is a better
    course of action.

  • How to mask data in oracle 11g database release 1

    how to mask data in oracle 11g database release 1
    my environment is
    Database: 11g release 1
    os: AIX 6 (64 bit)
    GC:10g release 1

    DBA-009 wrote:
    thx but how i can mask data with above give environment?What does "mask data" mean to you and what is the environment you are referring to?
    Telling us that you are using 11.1 helps. But it is far from a complete description of the environment. What edition of the database are you using? What options are installed? What Enterprise Manager packs are licensed? Is any of this changable? Could you license another option for the database or another pack for Enterprise Manager if that was necessary?
    What does it mean to you to "mask data"? Do you want to store the data on disk and then mask the data in the presentation layer when certain people query it (i.e. store the patient's social security number in the database but only present ***-**- and the last 4 digits to certain sets of employees)? Do you want to hide entire fields from certain people? Do you want to change the data stored in the database when you are refreshing a lower environment with production data? If so, do you need and/or want this process to be either determinisitic or reversable or both?
    Justin

  • Is it possible to view photos in icloud from an XP pc without the icloud control panel?

    is it possible to view photos in icloud from an XP pc without the icloud control panel?

    The iCloud control panel requires Windows Vista or later.
    Regards.

  • Data sync between oracle and sql server

    Greetings Everyone,
    Your expert views are highly appreciable regarding the following.
    We at work are evaluation different solutions to achieve data synchronization between oracle and sql server data bases. Data sync i mentioned here is for live applications. We are runnign oracle EBS 11i with custom applications and intending to implement a custom software based on .NET and SQL Server. Now the whole research is to see updates and data changes whenever happens between these systems.
    I googled and found Oracle Golden Gate, Microsoft SSIS, Wisdom Force from Informatica....
    If you can pour in more knowledge then it's great.
    Thank You.

    Most of the work involved has to be done through scripts and there is no effective GUI to implement OGG.However using commands is not vey togh and they are very intutive.
    These are the steps, from a high level:
    1.Get the appropriate GG Software for your source and target OS.
    2.Install GG on source and target systems.
    3.Create Manager and extract processes on source system
    4.Create Manager and replicat processes on target system
    5.Start these processes.
    First try to achieve uni-directional replication. Then Bi-directional is easy.I have implemented bi-directional active active replication using Oracle DBs as source and target. Refer to Oracle installation and admin guides for more details.
    Here is a good article that may be handy in your case.
    http://www.oracle.com/technetwork/articles/datawarehouse/oracle-sqlserver-goldengate-460262.html
    Edited by: satrap on Nov 30, 2012 8:33 AM

  • Can I use an OLE DB Command Task to call a parameterized stored procedure, perform some data editing and pass variables back to the SSIS for handling?

    I am using a Data Flow and an OLE DB Source to read my staged 3rd party external data. I need to do various Lookups to try and determine if I can find the external person in our database...by SSN...By Name and DOB...etc...
    Now I need to do some more data verification based on the Lookup that is successful. Can I do those data edits against our SQL server application database by utilizing an OLE DB Command? Using a Stored Procedure or can I sue straight SQL to perform my edit
    against every staging row by using a parameter driven query? I'm thinking a Stored Procedure is the way to go here since I have multiple edits against the database. Can I pass back the result of those edits via a variable and then continue my SSIS Data Flow
    by analyzing the result of my Stored Procedure? And how would I do that.
    I am new to the SSIS game here so please be kind and as explicit as possible. If you know of any good web sites that walk through how to perform SQL server database edits against external data in SSIS or even a YouTube, please let me know.
    Thanks!

    Thanks for that...but can I do multiple edits in my Stored Procedure Vaibhav and pass back something that I can then utilize in my SSIS? For example...
    One and Only one Member Span...so I'd be doing a SELECT COUNT(*) based on my match criteria or handle the count accordingly in my Stored Procedure and passing something back via the OLE DB Command and handling it appropriately in SSIS
    Are there "Diabetes" claims...again probably by analyzing a SELECT COUNT(*)
    Am I expecting too much from the SSIS...should I be doing all of this in a Stored Procedure? I was hoping to use the SSIS GUI for everything but maybe that's just not possible. Rather use the Stored Procedure to analyze my stged data, edit accordingly, do
    data stores accordingly...especially the data anomalies...and then use the SSIS to control navigation
    Your thoughts........
    Could you maybe clarify the difference between an OLE DB Command on the Data Flow and the Execute SQL Task on the Control Flow...
    You can get return values from oledb comand if you want to pipeline.
    see this link for more details
    http://josef-richberg.squarespace.com/journal/2011/6/30/ssis-oledb-command-and-procedure-output-params.html
    The procedure should have an output parameter defined for that
    I belive if you've flexibility of using stored procedure you may be better off doing this in execute sql task in control flow. Calling sp in data flow will cause it to execute sp once for each row in dataset whereas in controlflow it will go for set based
    processing
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • Is it possible to put some data, such as numeric and string, on the pront panel

    Hi guys,,,
    Is it possible to put some data,such as numeric or string as input data on the front panel? In general, I only know how to create text file by using notepad, for example,
    after that open and read that text file to show on the table control and plot XY graph. On the other hand, If I don't want to read the input data file from text file, I would like to use some tables in LabVIEW to serve as the input data instead of notepad, for example, on the front panel, and then take that input data table to plot XY graph afterwards. Is that possible?
    Thanks in advance
    Mannie

    There is a palette on the front panel if you right-click. It has controls on it that you can use as inputs and outputs. I've attached a picture.
    Also, you may want to run through Getting Started with LabVIEW. It covers things like this.
    (Edit: Oops, forgot the picture.)
    Message Edited by DJDDA on 12-10-2007 02:24 PM
    Attachments:
    controlspal1.gif ‏16 KB

Maybe you are looking for

  • Design View and a CSS Div layout page

    There are a few pages l ike this. I am assuming it is because everything is layed out w ith div tags, but there mush be a way to correct the desging view. Everything shows up great o nline. Here is a screenshot: Here is the code: <body onload="initHo

  • Home movies from DVD to Mac hard drive

    I am an absolute neophyte at playing with video files. I have some VHS camcorder home movies from when my kids were little. A few months ago I asked the local photo shop to copy the videotapes onto DVDs. Now I'd like to save those videos as computer

  • What are the right content conversion parameter in this receiver ?

    Hi experts, Can someone help me with setting right Content conversion parameter in the Receiver of File adpater(FCC).The output file must be fixed length text file. Here is the receiver structure: <Recordset>     <Header>        <f1>01</f1>        <f

  • How to change color in table header

    I have a table model like below I can change column colors (background or foreground ) but I couldn't change table headers color in my application . Basicly I want to change color of "Grup Adı","Kişi Sayısı" column headers. Please help thanks class M

  • NO PAYMENT PLAN

    How come when i updated my iTunes to the 10.5 , it still doesn't have at NONE PAYMENT Plan ? I am under age and I dont have crdit card ! Why is the payment plan still not allowing me to get free apps ?