Is it possible to 'pin' the timeline to the top-center of the screen?

In Captivate 4 I was able to move the timeline from the bottom-center and "pin" it to the top-center.  In Captivate 5, you can only "float" the timeline around the screen and it blocks the screen beneath it.  I know I can then move the window behind it down but it's not ideal and actually quite a simple thing I feel I'm trying to accomplish.  Has anyone else run into this?

Hi,
Yes, its not possible to dock the timeline to the top-center in Captivate 5.
But still, you can place the timeline at a suitable position, and then create a new workspace. This workspace will remember the position of your timeline panel.
Regards
Chinmay

Similar Messages

  • There are diagonal stripes on some clips on the timeline and wont play video in the program monitor.

    After reconnecting some origianl files after a hard drive crashed, there are diagonal stripes on some clips on the timeline that wont play video in the program monitor. They do however play in the source monitor.

    Those stripes are most likely the missing media indicators, which means you've relinked to the wrong clips.

  • Every time i put a clip into the timeline it crashes and just has the color wheel i have to force quit the program.

    I just downloaded the trial to see if I wanted to buy instead of using Adobe Premiere.  Every time i put a clip into the timeline it crashes and just has the color wheel i have to force quit the program.  I tried deleting the program and reinstalling it. Please help. Here are my specs
    2.3 GHz Intel Core i5
    16 GB 1333 MHz DDR3
    Intel HD Graphics 3000 512 MB
    OS X 10.8.2

    Is this for FCP-X?
    Wrong forum, you need to post here:
    http://discussions.apple.com/community/professional_applications/final_cut_pro_x

  • Fairly new to PP. When I drag a clip from the media browser only the video goes into the timeline. It doesn't allow the audio. What could I be doing wrong?

    Fairly new to PP. When I drag a clip from the media browser only the video goes into the timeline. It doesn't allow the audio. What could I be doing wrong?

    Its al in the targeting and source patching:
    Adobe Premiere Pro Help | Source patching and track targeting 

  • When I place a clip in the timeline and try to watch it, the viewer says "Unrendered" and it will not show the clip

    When I place a clip in the timeline and try to watch it, the viewer says "Unrendered" and it will not show the clip. What do I need to do to fix this?

    Option 1: Render the clip in FCE then watch it.
    Option 2 (preferred): Convert the clip so it will match your Sequence settings in FCE prior to importing the clip into your project.  It will not need rendering if converted properly.
    -DH

  • I am using Premiere Pro CS4 and every time I try to put something on the timeline it shows a copy of the timeline over the actual timeline. Is there some sort of codec that I need to download? I have Windows 8.1. Can someone help me out?

    Here is a screenshot of the issue. As you can see the timeline looks a bit funky!!!

    Thanks Ann...I did find an update for the graphics card driver...but it didn't do the trick unfortunately.

  • When I perform a split audio edit, the timeline doesn't show it when the clips are collapsed!

    Especially the clip whose audio is 'covering' another... the timeline doesn't show it's audio as extending, and it would appear only that the clip for which audio has been shortened, is still there, or at "0"... what gives? If you uncollapse the audio, or detach it, you do, once again, see the split audio.
    Thanks

    libovh wrote:
    Especially the clip whose audio is 'covering' another... the timeline doesn't show it's audio as extending, and it would appear only that the clip for which audio has been shortened, is still there, or at "0"... what gives? If you uncollapse the audio, or detach it, you do, once again, see the split audio.
    Thanks
    Like Zambonisurfer suggested, this is so by design.

  • How can i relink files to the timeline sequence when i've deleted the source file path? All the attribute are still in the timeline, I just can't relink

    So i started an edit and had the whole thing finished and ready to export in Final Cut X, when i went to export I had a message pop up say that it couldn't export while FCP X is still referencing media. I went through trying to solve the problem and ended up deleting the source media folders in the Final Cut Events folder and reimporting the clips. This lead to a whole can of worms opening up and now i'm left with a whole edit with 90% of the clips in the timeline unable to relink to source media.
    Can anyone help?

    First find the files. Then File>Relink Event Files and point to the folder.

  • Blocking the filling of a cost center in the creation of a Purchase Order

    Hi All,
    I've some cost center which are obsolete and mustn't be used in the creation of a Purchase Requisition (or Purchase Order).
    Could anyone suggest me how to do it?
    Thanks a lot
    G.
    Edited by: Jeyakanthan A on Jun 2, 2011 1:28 PM

    Hi,
    The transaction me21n uses the authorization object A_S_KOSTL for cost
    center. However, the authorization object A_S_KOSTL is not related to
    the cost center that is displayed in the account assignment view of th
    purchase order item, but its scope is to limit the access to fixed
    assets belonging to the specified cost center (see the note 856248).
    There is no standard authorization object that you can use from
    transaction me21n to validate the cost center that you see in the
    account assignment view at item level. The same can be said about the
    purchase requisition creation (me51n).
    So, I have three options for you to consider.
    First Option:
    There is an existing possibility to perform user defined checks during
    all kinds of postings which finally lead costs in CO. With transaction
    OKC7 you may define a validation which is also processed during
    purchasing. You can explore the possibility of achieving the
    functionality you need by making customizing changes using transaction
    OKC7.
    Second Option:
    You could use userexit enhancement MEREQ001. For further information
    please see note 310154.
    Third Option:
    Also, you may consider instead of an authorization check for cost
    centers you can activate an authorization check for G/L accounts.
    Therefore the following settings are required:
    I. Customizing -> Materials Management -> Purchasing -> Purchase
        Order -> Set Up Authorization Check for G/L Accounts:
        activate the G/L account authorization check for the required
        company code
    II. Transaction FS02 -> View: Control data: enter the authorization
        group
    BR
    Nadia Orlandi

  • HT5012 I have a first generation Iphone 5 and my question is why is my phone heating up so bad to the point where its almost to hot to touch on the back. On top of that the battery is dieing so fast that it usually lasts about 3 hrs on a full charge. Help

    So basically my iPhone 5 has been heating up so bad that it feels like its about to over heat and die. I've never had this happen to any other of my iPhones.  On top of that the battery is dying so fast that on a full charge is lasts about 3 hrs give or take. Ive tried closing all my apps like i usually do anyways, i tuned down the light, I've reset it and booted it back up, reset it and used iCloud backup, ext... Nothing is working. I'm to the point where i  almost want to get a new phone. I even tried calling apple support and they couldn't help me cause from what it sounded like they had no idea what they were doing. If anyone has any comments on how to fix this i would greatly appreciate it . I do love apple products and i have a upgrade and plan on upgrading my phone when the new one comes out but for the time being IDE like to fix the phone i have now that I've only had for a little bit anyways. Thanks  

    You are probably going to have to take a trip to the Apple Store, but you can also make sure that:
    Bluetooth is turned off when not in use
    Location Services are only turned on for those locations that you want a constant update to
    Background App Refresh is turned off
    Automatic Downloads is turned off
    Cellular Roaming is turned off when you don't need it
    Go through your Settings and take a look at all of the settings to determine if you have any turned on that may be using a lot of battery, and which you really don't need.
    Cheers,
    GB

  • My iPod touch is showing a lock in the top center of the screen and I can't unlock it

    Any idea's on how to unlock it?  I have never used a passcod with my iPod Touch before, so it shouldn't be a passcode issue.

    -Try a reset, nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Next, connect the iPod to the computer and restore via iTunes. If necessary, place the iPod in Recovery Mode to allow the restore.

  • When using mail icon i get a blank screen with No message selected on the RH side. Top left is the word thread in  black . all other buttons are greyed out except the send new mail one. Cna anyone help?

    Email does not appear when using the mail icon on the home screen. I get No message selected showing on the rh side of my screen with the left hand third of the screen blank. Buttons on the top line are greyed out except the new mail one. The word thread appears in black on the top left hand side of the screen The only way out is to close the screen. all other apps work okay.

    Hello calverone,
    Thanks for using Apple Support Communities.
    To start troubleshooting this issue where the Mail application is not appearing correctly on your iPad, I'd like you to please force the Mail app to quit, and then restart your iPad.
    iOS: Force an app to close
    Turn your iOS device off and on (restart) and reset
    Have a great weekend,
    Alex H.

  • How can I turn off the new "tabs on top" layout of the new Firefox?

    Dear Mozilla,
    Te be honest I was very comfortable with the old Firefox layout and really don't like the new 'Tabs on Top' layout. It's one of the main reasons I hate Chrome.
    Is there any way I can turn it off? I haven't been able to find it.
    If not, can you direct me to a download page for the previous version of Firefox.
    Thanks and bets regards,
    Chris

    I can't help but agree with you, Chris. Computer interfaces are usually analogues for the physical world and it seems that most of the just-newly-adult population has forgotten what GUI cues are meant to be - your mention of tabs' appearing on top is a case in point.
    Has the just-newly-adult population forgotten manila folders? You know - those light-cardboard folders that you put pad paper and documents inside; ones that you slip into a filing cabinet, long-edge down, with TABS showing along the now top edge, so that you can read what they contain. Indeed, have you looked, people, Mozillians, at the symbol universally used for File/Windows Explorer? A manila folder!
    The edges of manila folders are the tabs that ....wait for it, signify what they contain or represent. Simple. Similarly the just-newly-adult population may have forgotten tabbed diaries. 'Calendar books' with tabs down the opening side that let you select a page somewhere in the diary with information in it described by words or symbols on its tab. Simple!
    Tabs should be attached, indeed, be part of, with NO separation from, the pages to which they belong, IMVHO.
    Simplify the interface, Mozilla, designed according to good real-world principles.
    PhredE - 11th May, 2014
    PS http://download.cdn.mozilla.net/pub/mozilla.org/firefox/releases/

  • In the Graphic Tab and Work Center Error The Page Cannot be displayed

    Hi In the Solar01 and also in the Solman_Workcenter I am getting error  "The Page Cannot be displayed"
    In the Solar01 - I have Business Processes save and  under the Graphic Tab when I am clicking on the correct Business Scenario Node.  I am expected Graph to display.  But Showing error
    In the Solman_Workcenter -  I set up the added the Starndard Role Busing Solaman Basic Role and + implementation role.  When i go under Solman_workcenter transaction I am getting the same prolbem i.e "The Page Cannot be displayed"
    Any Idea friends.
    Appreciate your help
    -Santh

    Hi,
    Refer note 834832. Check activation of services in transaction SICF and the patch level of your SAP GUI.
    Thanks.
    Kathir

  • So annoying! When I print just from the browser, it prints unreadably small in the top center of the page.

    I have called support on my actual printer and everything is fine, they suggested to contact the browser I am printing from. Microsoft word and other software prints normal. Any web page I attempt to print from, even when I select the "print page" option, I have this error. I have been through all the troubleshooting to reset defaults.

    Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
    How about with a new, empty profile? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile
    What steps have you tried?
    What is the printer model? What driver/version are you running?

Maybe you are looking for

  • What's the difference between a web site and a web application?

    I'm stumped trying to come up to a difference between a web site and a web application for myself. As I see it, a web site points to a specific page and a web application is more of some sort of 'portal' to content and information. But where I'm stuc

  • How to recover my macbook pro system password

    how to recover my macbook pro system password??

  • Crashed when generating report to a file.

    I'm using Oracle 9i/Oracle Form 6i/Oracle Reports 6i. When I run my report from my forms, I can preview it and print it fine. However, when I try to select anything from "generate to file" menu, the report will crash. My form and report works as the

  • Error in Query designer

    Hi Experts, I have created char variable for ZOSO_SAELCHDT When i am saving the query it is giving this error. *Errors: VariableZOSO_SAELCHDT(0002tndgsjdthu4buc8gmtnw) does not exist or is incorrectly used 00O2TNDGSJDTHU4C2GCAV0PF0* Can anybody plz h

  • Conditional display using Pl/SQL function body returning a boolean

    I am having issues with conditional display of a report. I have to select lists: p50_facility and p50_supervisor. I have entered the below pl/sql function body returning a boolean Begin if (:p50_facility is null or :p50_supervisor is null) THEN Retur