Is it possible to play video double speed?

Hi All.
Is it possible to play video file or video stream double speed?
I've never seen the flash player. Please show me the way.
Thanks in advanced. and sorry for my poor english.
Kevin.

Is it possible to play back video at double speed, but keep the pitch normal? How about playing back at a fraction of double, say, 150% speed?
No, not that I'm aware. Yes; try Shift+L (for forward play) and Shift+J (for reverse play). Start playback with L, and then tap Shift+L; that should increase speed in 25% increments, and you get a number of steps before it tops out. You can do it from a paused state, as well, and get fractional slower-than-realtime playback--that's very helpful, as well.

Similar Messages

N95 Music playing at double speed

Hi folks
Recently got the N95 and have tried to transfer music from my downloaded collection onto te phone only to find that it plays at double speed on both the phone and when using nokia music player on the PC.
Music imported from CDs seems to work fine.
Any ideas
Cheers
McGratts

The music manager of Nokia have some hiccups need to be ironed out yet, use windows music player to rip & convert the music to mp3 or wma, then transfer it by use of file manager of pcsuite to the appropriate phone directory(cut & paste).
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Actual flashplayer on Win 7 not possible to play videos

After installing the actual flashplayer on Win 7 not possible to play videos anymore

Check if there is a newer device driver for your display adapter; see http://forums.adobe.com/thread/945765

Clip plays at double speed for no reason

When I am in FCP 5.0 I play a clip and it plays at double speed for no reason (captured dv25 from dvd via decklink extreme capture card). This happens when I click on play in the source or keyboard shortcut. I'm certain that I am not putting in to this mode by clicking or keying twice. Then suddenly I will close and open the clip and play motion is normal. This occurs on tutorial clips in FCP not just ones I have captured. I have trashed FCP preferences but this still happens. Any ideas?.....
Thanks in advance.
G5 Powermac Mac OS X (10.4.4)

Haven't heard of this before, so unless someone else has a ready solution, I'd say you're going to need to troubleshoot. Start by creating a new user account, check the box to allow it to administer, then log into the new account and see if the problem follows. Please report back.

Hit Play video plays about double speed

When I play the video I am working on in the timeline, the video starts normal (for about a second) but then starts racing at about double speed. If I turn the external video to off under the "view" pulldown menu, the playback is normal.

Please give your full system specifications, what computer, what drives, what camera or deck, how everything's connected, what settings are on the media, what settings you're using in Final Cut, and finally what version of the software, of the OS, and of QuickTime you are using.

Is it possible to play videos or clips with the appletv from an Time Capsule direct without other hardware?

I want to play videos, movies and music-clips (either mp4, other formats or out of an itunes-db) on my appletv without using other hardware than the apple tv an the Time Capsule (except the tv ;-) ). Is it possible to stream direct from the Time Capsule? With other and even cheaper NAS-Storages is it possible, eg. with the ps3 ...Thanks for help.

The TC from the day it was introduced until today.. has got a bigger hard disk and gained dual band wireless.. but nothing substantial.. it is not a NAS and has never been more than a target for TM mostly laptops as any desktop Mac can have an external drive for backups cheaper and faster than TC.
Many people were disappointed that Gen4 was a nothing upgrade. it is just a Gen3 with a different wireless card. Don't know if there will even be a Gen5 as Apple seems to see Cloud as the answer for remote storage. I would not be surprised if it was dropped completely. But who knows.. Apple sure don't let any secrets out of the bag.
And for the AppleTV 3 there is no JB or other things possible at this moment?
Not yet.. we are awaiting as some major effort is being expended. There is a hack just recently for the ATVv2 with v5 of iOS.. so the v3 may not be far behind.. v2 are commanding high prices at the moment on ebay though.. near to double purchase price when they sold out before v3 arrived.. as people discover their TV watching plans are now in tatters. Or their library of movies is no longer accessible.

[SOLVED] Chromium + pepper = Video @ double speed

I am using the latest stable chromium, with the pepper-stable package from the AUR recommended in the Chromium wiki.
I moved to Chromium as Flash is no longer being developed for Firefox....And Firefox 26 crashes a lot, and randomly, including with all plugins removed. So It's a problem right now.
As the subject mentions....I am getting weird video issues. Usually, the video plays back at double speed, with the associated spastic audio output. Here is an example: Ref: http://www.youtube.com/watch?v=smCQ2g9L7PU.
This used to play fine in Firefox with the old flashplugin.
In my porting process, here is what I did:
With no browser open:
a) "sudo pacman -Rs flashplugin"
a1) Verified that flash was no longer operating in Firefox.
b) "sudo pacman -S chromium"
c) "yaourt -S chromium-pepper-flash-stable"
d) In chromium: "chrome://plugins" to verify that flash wasn't showing up.
Arch x86_64 (current), NVidia GTX-660, using the nvidia drivers from Arch...extra. (rev 331.20) vdpau is installed in both the 64 and lib32 variants.
I have tried disabling hardware acceleration in the pepper-flash plugin, restarted the browser and retried. I have tried enabling hardware acceleration, restarted the browser and retried.
Playback seems unaffected in either scenario, and remains unusable.
Gnash has never performed properly for me in any scenario where I've tried it. So Gnash is not an option. Gnash has a long way to go until it is ready to be a good drop-in replacement for an official "flash plugin".
So for now, I have to use the smtube for smplayer to view YouTube/major news site videos properly.
I am requesting, please, some assistance in fixing my video playback issue in Chromium.
Sincerely and respectfully,
Dave
PS: I'm curious, why does the firefox community appear to be sitting on their hands when Adobe has made it clear for a long time that Adobe Flash for linux is being abandoned as of 01-JAN-2014? I would have expected some really heavy programming resources to be assigned to gnash to make it better, or write some sort of wrapper for the chromium pepper plugin....for official Adobe support.
Is there another reliable flash playback mechanism that I am missing all together?
Last edited by dcbdbis (2013-12-28 01:24:51)

I agree with ewaller (the new html5 player for youtube is good) but to answer your question I had a similar issue with pepperflash and if I recall correctly it was related to sound issues. I do not remember which package solved the issue but here is the alsa / pulseaudio packages I have installed:
$ yaourt -Ss alsa | grep installed
extra/alsa-lib 1.0.27.2-1 [installed]
extra/alsa-plugins 1.0.27-2 [installed]
extra/alsa-utils 1.0.27.2-1 [installed]
extra/pulseaudio-alsa 2-2 [installed]
multilib/lib32-alsa-lib 1.0.27.2-1 [installed]
multilib/lib32-alsa-plugins 1.0.27-1 [installed]
$ yaourt -Ss pulse | grep installed
extra/libao 1.1.0-3 [installed]
extra/libcanberra-pulse 0.30-4 [installed]
extra/libpulse 4.0-6 [installed]
extra/pavucontrol 2.0-2 [installed]
extra/pulseaudio 4.0-6 [installed]
extra/pulseaudio-alsa 2-2 [installed]
multilib/lib32-libpulse 4.0-6 [installed]

Is it possible to play video directly from my GoPro2 using the connector kit and memorycard?

Hi,
I have the new GoPro2 action cam and a Ipad2. I bought the connector kit for memorycard and USB. I was hoping that I just could take the memorycard and upload the videos to my Ipad2, but I was wrong. I don't work! I have been filming on the highest quality resolution. It is only showing as an grey object.
Can anybody help me with this, is it possible to play the movies?
Regard
Stanly

It may not be compatible with the iPad. See below for reference.
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

Quicktime not playing at double speed

When I try to open any mp3 file in QuickTime and play it at 2x speed, it goes silent. Prior to the iTunes 12.2 update/Yosemite Recovery Update 1.0/OS X 10.10.3 update, this wasn't an issue.
QuickTime is currently running on ver 10.4
I'm running on a Macbook Air with a 1.4 Ghz processor intel core i5 with 4 GB 1600 MHz DDR3 with 50 GB of memory left.
Any help.

The music manager of Nokia have some hiccups need to be ironed out yet, use windows music player to rip & convert the music to mp3 or wma, then transfer it by use of file manager of pcsuite to the appropriate phone directory(cut & paste).
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Possible to play video reverse

Hey I got a little problem I hope someone can help me with. I Have some small videoes I have to play on a seamless loop. It's basicly a little peace of video that i then play backwards so it appears like a seamless loop. At the moment I have made the video so it plays backwards, but I was hoping to cut that out to have some actionscript that would do that so i becomes a bit easier on the bandwith. Below, you can see the code I have sofar, hope you can help - thanks...
var moviesA2:Array =["videos/eyes1.f4v", "videos/eyes2.f4v"];
var movie2:String = moviesA2[Math.floor(Math.random()*moviesA2.length)];
var timedelay2:Number = 0;
var video2;
var nc2:NetConnection;
var ns2:NetStream;
nc2 = new NetConnection();
nc2.connect(null);
ns2 = new NetStream(nc2);
ns2.client = this;
ns2.addEventListener(NetStatusEvent.NET_STATUS,netStatusf2);
function netStatusf2(e:NetStatusEvent) {
if (e.info.code == "NetStream.Play.Stop" && Math.abs(durationNum-ns2.time)<.1) {
setTimeout(replayF2,timedelay2*1000);
function replayF2(){
ns2.play(movie2);
video2 = new Video(287,263);
video2.x = 284.1;
video2.y = 140.5;
addChild(video2);
video2.attachNetStream(ns2);
ns2.play(movie2);

you can't play a video "smoothly" in reverse with actionscript. if choppy playback is acceptable, you can use the seek() method to playbackwards at about 1/2 to 1/4 second intervals.

After upgrading to Mountain Lion it's not possible to play videos in Fullscreen Mode

Hello everyone,
after upgrading to Mountain Lion on my iMac (27 inch, Mid 2011) I got the problem, that every video or movie in full-screen mode jiggles after a while. I'm using my Mac as a TV with Elgato EyeTV - and usualy I use it in full-screen mode.
A complete new installation from scratch didn't solve my problem.
If the problem occurs, the processor idles ans the hard-disk activity is low.
Is there anybody out there, who can help me?
Regards,
Stephan

If the issue only occurs when watching TV (using Elgato) then it's an issue on their side. Try a browser window and if can view the browser in full screen mode then that proves the point. You can also create another user account, log into that account and see if the issue is still there. If it disappears then you have an issue in your normal user account that needs to be tracked down. If the issue persists then your issue is global.

Nokia 3300 video playing double-speed?!! help!!

Hello
A couple of days ago i recorded a few videos at a concert on my nokia 3300. When i open them to watch them they play in double-time (really fast) but the audio is normal. It's never happened before and i really want to fix it so it plays in normal speed.
Can anyone help?!!!

Does it play at double speed with no sound when you watch it on the phone or on a computer ?
If it is on the phone, try switching the phone off and on again to see if that helps.
If it is on a computer you might need to get newer codecs for your media player.
Knowledge should be your Advisor when you need help.
1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
Love me or hate me, its still an obsession. Love me or hate me, that is the question. If you love me then Thank you! If you hate me then ...

1st movie uploaded to youtube plays @ double speed

Using a 4-year-old 13" MacBook with iMovie HD 6.0.3 I created a 36-second video which, when uploaded to youtube, has the video playing at double speed but the audio playing normally until the audio gets cut off since the video now has been reduced to 19 seconds in length.
On the youtube help forum I see others who have had a similar problem are being asked for info obtained from a freeware app called MediaInfo which gives all the particulars on codecs, I guess, but that software is not available for Mac.
Afraid I have not kept up to date on movies—am doing this for a friend and have no idea what to do. So far no one has responded to my query on the forum. Any direction would be appreciated.

There aren't any settings in iDVD that would increase or decrease the speed of a video, so you may want to take a look at the Quicktime movie properties to see if it was compressed by cutting the frames per second in half (eg, 15 frames/sec rather than the standard 30 fps).
If the original is 15 fps, you might try running a sample through MPEG Streamclip, iMovie, Quicktime Pro, Roxio Toast... to see if one of those can add frames back into the video so it's the standard 30 fps. I've not encountered this before, so don't fool around with your original and search the archives here and over in the forums associated with the software mentioned.
John

Why doesn't Quicktime play audio in double speed any longer?

Until recently, a person could click on the FF button to play a video/audio file in double speed and hear the audio. This was especially helpful when watching/listening to lectures. Now when you play in double speed there is no audio. What happened? Is there a glitch in the software? I hope the feature is returned to its former design.

Finally figured it out the solution! (This only applies to Mac users.)
Firefox 3.x ran in 32-bit mode and Quicktime 7.x runs in 32-bit mode, so the two programs worked just fine together. The new Firefox 4.x, however, runs in 64-bit mode, so the 32-bt Quicktime 7.x plug-in no longer works correctly.
Luckily the fix is simple: just switch Firefox 4.x from 64-bit mode down to 32-bit mode. Here's how:
[] Close Firefox 4.0
[] Highlight the Firefox icon in the Applications folder
[] Click COMMAND-i to open the Get Info window
[] Click on the box marked: OPEN IN 32-BIT MODE and close the window
[] Launch Firefox
You can now save Quicktime files as before, assuming you have Quicktime Pro.
[] After closing Firefox, you can un-check the OPEN IN 32-BIT MODE box so Firefox will once again run in 64-bit mode.

Music Will No Longer Play Double Speed

After changing to iOS 5 I cannot find a way to play things double speed on my iPad 2. Am I missing something or has this feature been taken away?
Thanks
Matt

It has been taken away.
Along with lyrics.

Is it possible to play video double speed?

Similar Messages

Maybe you are looking for