Is It Possible To Prevent a Stroke's Weight From Scaling with the Rest of an Object?

I want to animate a person moving off into the distance, but while I want the size of the figure to get smaller, I don't want the weight of the lines that comprise the image to scale down, too. I made this little sample of a person skating (poorly) away from the viewer, and I'd like the line weight to be 9 points in the first frame and the last frame. Is there a setting that allows me to exclude stroke weight when scaling and resizing an object?

If you're asking if you can scale the length of the stroke but not the width, I don't think you'll have much luck there... I'm pretty sure one follows the other.

Similar Messages

Is it possible to edit spoken dialog without interfering with the rest of the sound?

I'm trying to piece together video clips from various movies, and in one of these clips the character swears strongly a couple times. Normally, I don't bother with this, but my audience is that of a "clean" nature and is strongly against profanity. Is there a way to briefly mute, or change the character's voice when he cusses and not interfere with the rest of the sound? Or is this asking too much?
Also, I looked in the "help" section and couldn't find anything to help me with this. But I have a bunch more questions. Where do I go that will explain all the features of Premiere Elements 8, without forcing me to spend hours figuring it all out and/or posting a billion discussions here in the forums and bugging all of you with my lack of knowledge?

What you are attempting to do requires a bit of work and then some luck.
It sounds as though you have an Audio Clip with both background noise and possibly music, plus dialog. You wish to remove just the dialog in a particular spot, or spots. Is that correct?
If so, then in an Audio editing program, like Adobe Audition, you can possibly extract the ambient sound/music with a Karaoke Effect, or with the application of EQ. This will yield a separate file with hopefully just the background and music, and no dialog. In a Multi-Track Session, place both files on a separate Track. Find the point where you wish to remove the dialog. Here, the workflow might differ, but I'd Cut out the dialog at that point, leaving only the Karaoke Track. To clean things up, when I had done this for each offensive passage, I would go to the Karaoke Track and do just the opposite - Cut out all that was NOT underlying the offensive passages, but leave a bit of that Track before and beyond the deleted dialog. Then, I'd add a Cross-Dissolve for Constant Power to those Karaoke segments to "ramp" the Karaoke Track into the mix, as it will never be perfect, and one wants as smooth a transition, as is possible.
Now, one can do this in other audio editing programs, that offer Multi-Track editing, and also VST plug-ins, or install with Effects like Karaoke and/or Parametric or Graphic EQ's. You could explore the great, free audio-editor, Audacity, and Google for VST's that will enhance its capabilities. Be sure to read the Help files on Audacity, as one does need to do a few things in setup to allow the addition of more VST's.
The work will be with the Karaoke (or similar) Effect, its result and also the frequency ranges of the speaker. That is where the "luck" comes in. Much human speech can be EQ'ed out, or at least greatly attenuated. Now, if you have a crowd talking in the background, or similar, and wish to retain that, all bets are off.
Also, if you only have ambient sounds, and no music, behind the speaker, just find segments of that ambient sound, where the speaker is not talking, and use that to "patch" where you cut out the dialog.
Good luck,
Hunt

Getting a "Your network preferences prevent us from communicating with the server" error in dw 5.5

Hello, lately i noticed dw 5.5 can't seem to use browserlab, it says "Your network preferences prevent us from communicating with the server"
I can connect to BC and other ftp servers no problem, I've also turned off my firewall to be sure and it still won;t connect.
The only info I found on this error is a tip on how to turn off browserlab, which in turn gets this error, Not sure why you would wnat to shut the feature off, but no tip to turn it on. The tip on editing the registry doesn;t help because itsyays to change the registry key to 0 and all communication of adobe products will be turned off, however the key does exist and is set to 1, so I can;t even try that tip in reverse to enable, itshould be communication already.
Any help would be appreciated, I am just competinga site and was about to check it in all the browsers, an incredibly useful and time saving feature, but I can't now.
Rich

Phil, the only screenshot I've seen from you is the error message (and I can't seem to view the others you just posted), so apologies if I told you something you'd already tried. We still think there should be a solution to this, it's just that debugging issues this way can be a little difficult, so please bear with us.
At this point our best guess is that there is a registry setting that got changed that is causing the issue for both of you. We have been able to repro the issue on Windows XP by setting the following 32-bit registry entry to 0. The issue was fixed by changing it back to 1. We've also tested on Windows 7 and verified the same thing with the 64-bit registry entry. Apologies if I'm suggesting something that any of you has already tried, but no details were provided about which registry entry you checked or what article you were looking at.
From the CSLive team:
"To my knowledge the only way to get that error message is to disable CSLive in the registry. The Customer does not mention the exact article or reg value that he is looking at in his post but it should be:
For 32-bit systems: HKEY_LOCAL_MACHINE\SOFTWARE\Adobe\AdobeOnlineDefault.
For 64-bit systems: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Adobe\AdobeOnlineDefault
http://kb2.adobe.com/cps/846/cpsid_84665.html
He should delete the AdobeOnlineDefault entry in the registry and try again. (he may need to stop and restart CS55Services Manager or reboot machine)."
Let us know if this fixes the issue for you or not. As with any change to the registry we recommend you make a backup first and proceed carefully.
Thanks,
Mark

If it is possible a scripting can making contents of a book with the correct page numbers?

I was wondering if it is possible a scripting can making contents of a book with the correct page numbers.
I know indesign has already a function that can making contents in a same file, as long as some paragraph styles were indicated to make the contents.
But if the title on the master page, it doesn’t work.
If it is possible to make it happen on a whole book, in spite of what I choosing title was on the master page?
Can somebody help me?
Thanks!

I work on one book which has 40 topic that follow immediately, each topic has a title, socalled section headed. They were put on the master page. What I want is the section headed and the each topic's starting number to make a contents.
Each time, I work on this kind of book, I have to copy them 40 times to make a contents page, and I have to writing down the each section's starting page number and then type in the contents.
I was wondering if it is a function can help me and let me easily to make a contents.
can somebody help me
thanks!

Exporting to PNG, Stroke Weight not Scaling with Export Scale

Hi there
I am having some issues exporting illustrator documents to multiple sizes of PNG.
I am actually scripting this, but the issue seems to be more general - hence the posting here.
If you export a PNG through the web and devices tool:
File->Save for Web & Devices
And you scale the image by 50%, the line weight does not seem to be scaled with the export scale.
In Illustrator->Preferences->General I have Scale Strokes and Effects ticked.
This problem is also apparent when scaling a scripted PNG export through the ExportOptionsPNG24 class.
Is there anything I am missing please - or does anyone know of workarounds?
Thank you

Thanks for looking into it Kurt.
I can't post the illustrator file in question to the forum.
And, you are right, when I aim to make a demo file from scratch I can't reproduce the problem either.
I am having this difficulty on multiple files though, and they are all quite complex.
I will aim to try and make a file that shows the problem.
The files in question may have symbols that were created in much earlier versions of Illustrator.
I'm not sure if that could do it.
The sequence above shows the output as I export via script to successively smaller scales.
This is by setting the horizontalScale and verticalScale in ExportOptionsPNG24.
I see the same results if scaling in Save for Web & Devices.

Have searched Forums for quite some time now. Cannot find a correct answer to: how do I prevent my old email address from appearing as the "from:" address

Have searched Forums for quite some time now. Cannot find a correct answer to: how do I prevent my old email address from appearing as the "from:" address when I use a "send this" link on a webpage/news article. The email window opens and automatically inserts my old Hotmail address instead of the Yahoo address I've used for a long time. (The drop-down won't let me change it or delete it.) Thanks.

Do you get a drop down list with suggestions if you clear that "from" field and click elsewhere on that page to move the focus off that field and then double-click again in that field or start typing the first letters of that unwanted email address?
Use these steps to remove saved (form) data from a drop down list:
#Click the (empty) input field on the web page to open the drop down list
#Highlight an entry in the drop down list
#Press the Delete key (on Mac: Shift+Delete) to remove it.
*Form History Control: https://addons.mozilla.org/firefox/addon/form-history-control/
*Tahoe Data Manager: https://addons.mozilla.org/firefox/addon/data-manager/

Is it possible to ask user a text, and create watermark with the answer?

I am using the action wizard combined with preflight profiles to make some arrangements in the pdf I get from my customers.
I usually create a watermark and introduce it without problems, but I would like to go further, introducing a code number that changes for every item as a watermark.
It would be interesting that Acrobat asked the user that code number, and acrobat put that information in the bottom-center or the existing page...
Is that possible with the action wizard, or should I look for information in the javascript forum?
Thanks and Kind Regards.
Joan

I simply store *.HTM files on my memory card.
then used the Memory explorer to browse the memory card, and click on the HTM file.
it works fine.
you can also look the "save page" option when you are viewing a page.
the page gets added to your messages list like a regular email.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Is it possible to export a file from Organizer with the list of all the images in an album?

Is it possible to export a file from Organizer with a list of all the images in a certain album? In filling one of my albums I did not save my edited images to the same file... they are spread out a bit.... Now I want them to make a book with them (outside of Elements).

As far as I know, Elements does not have the ability to create lists.
The solution to your problem of making a book outside of Elements is to place all the desired photos in an Album and then select File->Export->As New Files which gives you the ability to make a copy of every photo in the album in a new folder, from which you would create your photobook.

Is it possible to to monitor a name instead or together with the MACadress

In airport utility i can display the MACadress of all logged in computers together with signal datas.
Recognizing the MACadress is a bit complicated...
But ist it somehow possible assigning names to the Macadress so one can overview quickly, who logged in or who has which signal?
Thank for answers or links concerning this question.

Thanks, i tried it, it works only with pure DHCP
the client name shows up in airport utilty afterwards under DHCP-clients;
well but the name does not show up under Wireless clients;
So its not exactly what i was looking for, i have no easy overview of the network in one window;
at the other hand i must use DHCP in order to make use of this feature;
Well still usefull; The feature "add wireless clients" is grayed so i cant use it.

Is it possible to prevent a group of users be added into other groups?

We have a admin group named "app admin" which has full privileges to a target OU "ou=apps,ou=services,dc=xxx,dc=com".
And we are looking for solution to prevent members in the admin group putting their own account or group members into the target OU.
Tried the aci with "deny self write", but it only prevents admin user put their own DN into the target OU.
And they still can add their group members into the target OU.
Just wondering is it possible to prevent a group of users be added into the target OU while they still can add/delete/modify normal users into the target OU?
The version of our Directory Server is 6.3.1.
Thanks

goog,
For each data member, you will need a unique URL. There is not a way to bundle them into one URL.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

What are the different types of analytic techniques possible in SAP HANA with the examples?

Hello Gurus,
Please provide the information on what are the different types of Analytic techniques possible in SAP HANA with examples.
I would want to know in category of Predictive analysis ,Advance statistical analysis ,segmentation analysis ,data reduction techniques and forecast techniques
Which Analytic techniques are possible in SAP HANA?
Thanks and Regards
Sushma C Narasimhamurthy

Hi Sushma,
You can download the user guide here:
http://www.google.com.au/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CFcQFjAB&url=http%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2FSBOpa10%2Fen%2Fpa_user_en.pdf&ei=NMgHUOOtIcSziQfqupyeBA&usg=AFQjCNG10eovyZvNOJneT-l6J7fk0KMQ1Q&sig2=l56CSxtyr_heE1WlhfTdZQ
It has a list of the algorithms, which are pretty disappointing, I must say. No Random Forests? No ensembling methods? Given that it's using R algorithms, I must say this is a missed opportunity to beat products like SPSS and SAS at their own game. If SAP were to include this functionality, they would be the only BI vendor capable of having a serious predictive tool integrated with the rest of the platform.... but this looks pretty weak.
I can only hope a later release will remedy this - or maybe the SDK will allow me to create what I need.
As things stand, I could built a random forest using this tool, but I would have to use a lot of hardcoded SQL to make it happen. And if I wanted to go down that road, I could use the algorithms that come with the Microsoft/Oracle software.
Please let me be wrong........

Is there anyway to prevent someone using my ipad from resetting it in iTunes?

My ex-wife has primary custody of our daughter. I gave her my first iPad so she had something to use for school and entertainment. Is there any way I can prevent my ex-wife from using her itunes account to reset the ipad?

Your friend is wrong. If he was right no one would ever steal an iDevice because it could never be reset. In addition youi'd never be able to upgrade your computer and switch from syncing with the old one to the new one.
He may be thinking of a different kind of reset, but what people can do is wipe it, erase it back to out of box state.
If you have a passcode on it you can keep them from accessing the data on it but they can still wipe it.

I have gone through 4 charging cables for my iPhone 5. Is it possible to claim one free of charge from Apple?

I have gone through 4 charging cables for my iPhone 5. Is it possible to claim one free of charge from Apple?

The cable that came with it is covered under the same warranty as the phone. Why have you been buying them?

Is it possible to print larger than 4x6 from ipad with airprint?

Is it possible to print photos lrger than 4x6 from ipad with airprint?

Suzie-
It apparently depends on both the Photos program and which printer you have. My HP D110 only does 4X6, regardless of the paper size. Others can sense the paper size and adjust automatically.
I suggest you download the free iPad App, HP iPrint Photo. If it works with your printer, it has the capability of specifying paper size, and lets you change image size and orientation using two fingers. Some of the other printing Apps like Print n Share can do that, but are not free.
Fred

: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

Hi   .
    I was creating the pass the values t in temp tables though s sis package vs2012 .
  First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
   exec USP_GETMP02333
   go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one   executive sql
In 2<sup>nd</sup> excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2<sup>nd</sup> excutive ql task .
Iam getting this type of errors,
                [Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help me

Arthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon.

Is It Possible To Prevent a Stroke's Weight From Scaling with the Rest of an Object?

Similar Messages

Maybe you are looking for