Is it Possible to Preview Sound While Scrubbing the Timeline Using Hotkeys?

If I have a sound in my timeline, I can scrub through the timeline by dragging the red box and it will preview the sound that plays on every frame. However, I have hotkeys set to scrub through my timeline (, & .), and when I use them, the sound does not in fact preview. Is there a way to set up my hotkeys so the sound will in fact preview?

Hello,
I don't believe there is a way to view images in the files
panel.
However, there's a quick way to see them if you're using
Windows.
Select your image folder in the Files Panel.
Right click and choose "Explore".
It opens a window where you can see all the images in that
folder.
It's much faster than scrolling through the assets, clicking
the file names
and reading the paths to know where they are.
This is very handy whether you have image folders in
different directories
(for organization and cleaner img src paths in the pages
within the
directory) or if you just dump them all in a folder in the
root.
On my wishlist: Hover over the image name in the files panel
and a small
box, like a tool tip, displays the image.
Maybe someday.
Take care,
Tim
"dexter manika" <[email protected]> wrote in
message
news:go4to8$k1m$[email protected]..
> sorry in advance for what probably is a dumb question
with a simple
> solution.
>
> i realize i can view images in the assets panel-- but is
it possible to
> view
> image files while in the files panel instead?
>
> i have a lot of images organized within folders in the
files panel-- so
> it's
> easier there to locate and visulalize an image-- than
scrolling down the
> long
> list in the assets panel.
>
> thanks.
>

Similar Messages

Can't hear my audio while scrubbing the timeline any more.

Forum,
I used to be able to scrub the timeline as fast as I wanted and still be able to both hear and watch my audio meter in FCP. Not anymore though. I'm not sure what happened, but I can no longer do either of the two.
Any tips?
Thank you,
Trey Vollmer

No, sir.
I mean zooming into the whole monitor. Every single pixel gets bigger - that kind of zooming.
You know what I'm saying? Well I'm trying it now as I speak and it's working, so never mind. It seems to me my mouse just needed to be cleaned.
Thank again,
Trey

Crackling sound while pressing the area of Micro SIM slot?

I´ve to ask the global z1 compact users about the build quality of the devices.
My first device from amazon.de had a crackling sound while pressing the area of the micro SIM card slot - amazon did an instand replace but the replacement unit also started with this issue on day after set up. I think this is not a general fault but i´m a bit angry with this issue on such an premium device.
Can you hear anything when pressing this area? what do you think about that? Will you recharge?
I´ll hope that this is not a problem for water resistance...thinking about the Z in the first times...loosing back panel...
Greetings,
SirRobin

Could you please send me your details in a PM, and I will forward this.
Make a relevant topic and include the following.
Name:
Phone nr:
E-mail:
Country:
Operator:
Product(s):
IMEI nr:
Build number:
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Can anyone please help me, I'm having problems with sound while watching video clips using flash player using Internet Explorer\

Can anyone please help me, I'm having problems with sound while watching video clips using flash player & Internet Explorer

There's a good chance that this is a known issue. We'll have a Flash Player 18 beta later this week that should resolve this at http://www.adobe.com/go/flashplayerbeta/

HT4528 Can you disable other notification sounds while on the phone?

Can you disable other notification sounds while on the phone?

The only option you have is to put the phone on mute using the side control when you answer the phone.

In an HDV sequence can I "scrub" the timeline and record it via FW to tape?

In an HDV sequence can I "scrub" the timeline and record it via FW to tape?
In standard definition I used to be able to do this via Firewire to my mini-dv deck. But now I am working with the Canon Vixia30, an HDV camera. I'd like to be able to scrub the time line back and forth at varying speeds and record this scrubbing live (rather than doing it with Motion software.) Is there anyway to "record" this action, either onto tape or digitally, while maintaining the HD resolution?
If possible I'd like to figure out how to do this without buying extra equipment. I understand I could get a Matrox MO2 Mini box ($450.) to output the live HD signal, but then how to record the HD signal from the Matrox box? (my camera only has HDMI out, not in.)
Thank you for your input.

And if you capture your footage as ProRes (as I see discussed in another thread), you cannot output to HDV via firewire. It would be pointless. To go from a lossy format to ProRes to edit...then convert back to HDV. Typically people who shoot HDv never master back to HDV, as it isn't a mastering format.
And yes, the MAX is totally worth it. Compression times faster than RT (meaning less time to compress than the timeline is long...I did 90 min timeline in 75 min yesterday). Worth it? Depends how much your time is worth. TO me, I'd like to have the compression done in 75 minutes opposed to 3-4 hours.
Shane

Getting Error while accessing the data using odata service

Hi All,
Iam new to SAP FIORI.
Iam getting the below error while accessing the data using odata service.
"Failed to load resource: the server responded with a status of 404 (Not found)"
"No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin "
i have tried all the solutions like changing the url pattern "proxy/htttp".
and disabled - security in chrome (Chrome is Updated version).
i tried with IE still got the same problem.
And installed all the required software in eclipse
While installing GWPA plugin i got the following error.
let me know if any one have idea.
Thanks in advance.

> Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
>
> so in that way :
> bot the options are fine what ever take less time.
Sorry mate, but YOU have to know what you want here.
I gave you an easy to follow set of steps.
As you don't seam to mind the outcome, just might just use them...
> I wanted to know weathe i can use the loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
We had this discussion before...
>
> For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
>
> For ease of use you could also just do:
> - logon as superdba
> - drop user SAPR3
> - create user SAPR3 password SOMEPW not exclusive dba
>
> After these steps you can easily pump the data into the database again.
>
> So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
> i already have that user SAPR3 can i use the same.
Yes, you do have the SAPR3 user.
But you don't seem to like to read documentation or learn about how the tools work or anything like that.
Therefore I gave you s simple way to reach your goal.
Of course it's possible to reuse the user.
But then you would have to deal with already existing tables, already existing data etc.
You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
regards,
Lars

Posting period 011 2013 is not open while posting the document using F-02 getting the error

Hi SAP Captains,
Pls help me here.
While posting the document using T-code F-02 getting the error "Posting period 011 2013 is not open.
Please help me how to do, can you provide step by step.
Rgds..Suresh

Hi Suresh,
You can search google and will get number of posts on this. This will lead to duplication of similar posts on forum.
The message says "FI posting period is closed for 11th period of 2013". In which period you are trying to post the transaction?
If it is past, open the FI posting periods in OB52.
BR, Srinivas Salpala

Error while uploading the data using FM"upload"

Hi,
I encountering an error while uploading the data using text file with FM " UPLOAD"
The error is "File does not exist or cannot be opened "
But there is a file with name and extenstion right.
Regards
Vishnu

You have to create RC29P-IDNRK(var) using concatenate statement. Try this.
DATA: new_mark TYPE bdcdata-fnam.
CONCATENATE 'RC29P-IDNRK(' var ')' INTO new_mark.
PERFORM bdc_field USING new_mark W_BOM-QTY

How do you move a sound clip in the timeline?

I have not had this problem before. I have put many songs into the timeline, and repositioned them. Today I pulled up a project and attempted to reposition a song to fit in better with the clip, and I'm unable to do so. I can't select the song, or anything else. Obviously I have set or locked up this track, and I can't figure out how to unlock if that is what I have done. I have 6 songs on that track, Audio track 2, and I can't reposition any of them. I can't even remove them from that track. What am I doing wrong?

Hunt, most of my music files, over 9000 songs, are mostly mp3 files and a few are wma, and because of copyright laws I wouldn't use them in a commercial project I'm working on anyway. When I am working on a project for a client I will generally use higher quality WAV files. This project was being done just to learn some new techniques, gain some more experience with PPCS4, and expand my knowledge with the program. I have this huge number of music files and styles to work with, so I can do a great deal of experimentation to see what different songs can do to the mood of the video.
As a test, I did put the exact same songs into the timeline on a different audio track. The problem track is audio 2, and I duplicated those songs on audio 3. I did the exact same editing. I faded them in and out the same as before. Split one song into 3 sections had parts of it come in and out over a video section of 9 minutes duration. They are working perfectly. I was just working on one section of that project a half hour ago, and I was still able to select and move each of the four songs on that track any way that I wanted to. However, the track just above it in that same timeline, Track 2, is still frozen.
Hunt, just a moment ago I solved my problem. Still not being that familiar with the program, two days ago I know that I was playing with all of the controls, and I obviously hit one of them without knowing one of its side effects. I hit the show "show track keyframes". I'm sure that you know it, but I didn't realize that when that function is selected, you can't do much else with the track but play with those keyframe. Even though I didn't have the track locked, in the traditional way, it was still, for all practicall reasons, locked. I unchecked that function and now everything is back to normal again on that track.
Something very simple, as many things turn out to be when you understand it. However, maybe someone else will make the same mistake, and my posting here will help them.
I will use your suggestions for using .WAV files. Thank you again.
Terry Lee Martin
Date: Mon, 7 Sep 2009 14:29:37 -0600
From: [email protected]
To: [email protected]
Subject: How do you move a sound clip in the timeline?
Terry,
What is the purpose of using the .WMA files? I'm sure that you have a good reason, but they can be problematic, at best. I only use them as a trasfer medium, when I need to get a DD 5.1 SS soundtrack into Audition for editing. There, I break them out into 6 discrete .WAV files, edit in Multi-track Mode and then usually Export as the 6 discrete WAV's to be encoded to DTS, or similar.
If you do not have a compelling reason for using the .WMA, try PCM/WAV @ 48KHz 16-bit and see if the issues go away.
Good luck, and let us know how it goes please,
Hunt
>

Issues while processing the BOMs using fm ''CSAP_MAT_BOM_MAINTAIN'

Hi Group,
we are facing issues while processing the BOMs using the basic type(Z-idoc type) for standard type BOMMAT04.
thing is that the segment 'E1STPOM' is defined to contain 1 to 99999 records in it.
when an Idoc is run(say with 150/200 segments of 'E1STPOM'), there was a standard error with error message id PIC01(number : 004) when the Idoc is processed with the Standard function module 'CSAP_MAT_BOM_MAINTAIN'.
the error says 'Error reading material FING_005 . Exception: 0' and Check whether the material number is blocked. but when checked, the Material seems not blocked.
kindly advise how to overcome this error and proceed further.
Regards,
Vishnu

Checj the material status, while its transfer from one server to another server the status should be different

Error while starting the OA using opmnctl

HI,
Am a Beginner on OAS.Am facing a error while starting the application using ./opmnctl startall.
opmnctl: starting opmn and all managed processes...
Failed to get IP for localhost (1)
Failed to get IP for localhost (1)
Failed to get IP for localhost (1)
opmnctl: opmn start failed
Not able to select the components using console.
Can you help me to resolve
Edited by: Tarunkudikala on Feb 26, 2009 3:25 AM

Why not better put that info ???
If you are installing Oracle Application Server in a DHCP network you must use a loopback configuration. To access the Oracle Application Server, you need to use a local browser. Perform the following steps to install Oracle Application Server in a DHCP network:
1.
Find the IP address allocated from the DHCP server by running the following command:
$ /sbin/ifconfig -a
The IP address is associated with the interface configured to use DHCP.
2.
Configure the host to resolve hostname to loopback IP address:
1.
Configure the host to resolve hostname to loopback IP address, by modifying the /etc/hosts file to contain the following entries:
127.0.0.1 hostname.domainname hostname
127.0.0.1 localhost.localdomain localhost
2.
Check that the hostname resolves to the loopback IP address by entering the following command:
$ /bin/ping hostname.domainname
----------------------

TSV_TNEW_PAGE_ALLOC_FAILED error while loading the DATA using DTP

Hi,
While loading the data using DTP for 2 DSO's we are gettig the error
TSV_TNEW_PAGE_ALLOC_FAILED
can any one kindly help me out regarding the same.
Thank You,
Poornima.

Hi Soundarya,
Thanks a lot for the reply. But i found that its running fine in development, where as coming to quality its throwing an error. These happened for Two DSO's. In both the transformations i have identified that the Transformation names are different from Development and Quality..
There are no routines written for them and no select statements have been used
Can you please suggest me regarding the same.
Edited by: Poornima Gayatri on Mar 22, 2010 7:00 AM

Scrubbing the timeline in Windows Media Player

I created a encore project a few months ago and when played in WMP you couldn't scrub the timeline or fast forward/rewind. I check the user settings and activated 'All' which seemed to cure the problem. However I've just created another disc in the series using the same settings and once again I can't scrub the timeline. Moreover playing the first project disc again now that too won't scrub.
If you pick up the play head button and move it down or back along the timeline it just flicks back to the current time.

You may search http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US for help with Microsoft products
You may also switch to VLC which is better http://www.videolan.org/vlc/index.html

Having trouble with sound while watching video clips using Internet Explorer?

sound & video pausing
while watching video clips using Internet Explorer

I answered your other thread. Locking this duplicate one.

Is it Possible to Preview Sound While Scrubbing the Timeline Using Hotkeys?

Similar Messages

Maybe you are looking for