Is it possible to provide a custom user interface in Formscentral?

I am new to formscentral and am attempting to transition a city of of pen and paper and into the 21st centrury filling out vehicle accident reports in formscentral.  I have gotten everything to work properly with one exception- how can a user interface be set up to show a drawing of how two or more vehicles colide within the form?
Right now they draw the collision with pen and paper.  All the other data points have been successfully incoporated into the Formscentral environment, including electronic signature.  I need them to be able to move a couple of cars around on the screen and show us how they collided.
Any suggestions?
Thanks!

Hi,
Thanks for asking.  FormsCentral is not currently support this workflow.  A suggestion here is to use the attachment field to attach the drawing to the form.
Hope this help,
Perry

Similar Messages

  • Get overall Pass/Fail from custom User Interface

    Hi Guys
    I’m working on a custom user interface for operators and I would like to check and display the overall Pass/Fail result of the test at certain time intervals during execution.
    I added a sequence called ‘GetOverallResult’ to the ‘FrontEndCallbacks.seq’ which checks the Pass/Fail status of the sequence and I’m calling it form a SubVI within the User Interface written in LabVIEW (Check status.vi).
    The problem is that I’m getting the Pass/Fail status of the CallBack sequence not the test sequence I’m running.
    Could anyone please help me in this?
    Attachments:
    Check status.vi ‏17 KB
    FrontEndCallbacks.seq ‏5 KB

    Hi Attila,
    Have you instead tried reading the value directly from the main sequence? Have a look at the attached VI; pass the sequence context in and the Get Property Value VI will read the sequence's state.
    Is this suitable for what you had in mind?
    Regards,
    Tom
    Applications Engineering, NI UK
    Attachments:
    check.vi ‏10 KB

  • When is it possible to have the same User Interface for all screensizes?

    Hi all, i am final year student doing some research about User Interface Fragmentation on Mobile devices. As we already know, there are a huge variety of mobile screen sizes, and usually to provide users the best experience interfaces, we often have to customize the UI of one application in one phone to another. So i wondered when it is OK to have the same UI for all screen sizes?
    Thanks.

    It's usually OK if you don't use CustomItem, avoid extra-long Strings in titles etc. You might also need to scale any Canvas / GameCanvas graphics and Images using a scaling factor computed from the detected screen size.
    I have 3 applications for free download from GetJar.com (search "Colorz") which have only the one version for all MIDP 2.0 devices, and there have been no complaints in a combined total of over 11,000 downloads ;-)
    In any case, UI diversity is the least of the headaches any j2me developer faces, there are many features of j2me that are unimplemented or incorrectly implemented on various devices. Even the CLDC reference implementation has unaddressed bugs.
    luck, db

  • Lego mindstorms: Is it possible to change the fixed user interface size of 1024 x 800 to smaller for use with netbooks?

    I teach at a school that is using netbooks next
    year - the screen size is 1024 x 576 for one model and 1024 x 600 for another model and color quality is 32 bit.  To
    our dismay, when we loaded Lego Mindstorms software to test it, we
    discovered that the user interface is fixed at 1024 x 800, which means
    the control panel at the bottom of the screen is inaccessible on the
    netbooks.  Is there a way to change the  interface size so that we can
    use the software on netbooks?  This is a serious issue for us!  Thanks
    for any help.
    I posted this question in the LabView for Lego Enthusiasts forum, but noticed that nothing new has been posted by the moderator since 2007.  That's why I posted it in an active forum.  Thanks.
    Message Edited by mwert on 03-27-2009 11:33 AM
    Melissa J. Wert
    Technology Integration Specialist
    Harpeth Hall School
    Solved!
    Go to Solution.

    Hi All,
    To echo Dennis Knight and as a FYI for others I refer everyone to KnowledgeBase 44DF7BQ0 How Does National Instruments Support The LEGO® MINDSTORMS® NXT Software And ... 
    Joshua B.
    National Instruments
    NI Services
    NI Support Resources
    NI Training Resources

  • Is it possible to scale down the User Interface on an iMac (late 2012)?

    Question for iMac users (late 2012):
    I'm considering purchasing a 27 inch iMac. I was wondering whether there is a possibility for convenience of use to display say 1440 px on a 27 inch in a retina fashion. Meaning all 2500 px are used - for instance to display details of a photo, or edges of objects - but the entire UI is scaled down to mimic a desktop that is only 1440 px wide.
    I know it's possible to do so on a MacBook pro with Retina Display - in display settings. But I don't know if it's possible on either a 21.5-inch or 27-inch iMac. Can any iMac (late 2012) user confirm this is possible?

    > When you set the display for scaled, there was no 1900 x 1080 scaled resolution?
    no, it was not.
    But I will check again this afternoon.
    > Earlier generation of iMacs did have the 1900 x 1080 scaled screen res. option
    I hope so!

  • How to create Custom User Role in HelpDesk?

    Unfortunately, it is not possible to create a custom user role with custom permissions.  What you see is what you get!
    When you say, 'access to the Spiceworks server', do you mean Remote Desktop?  Or accessing Spiceworks application from another computer?

    Hi,
    Could anyone help me to create my custom User Role or edit the existing Role in HelpDesk system? Please help me for this problem.
    One more, How could my Helpdesk Admin/Tech user access to the Spiceworks's server. I mean, could he access through web browser or need to install it on client's PC?
    Stay tune,
    This topic first appeared in the Spiceworks Community

  • Error -17501 flxCVIadp.​dll when starting CVI full featured user interface on Windows 7

    We see the following error dialog when we launch the CVI full-featured user interface (TestExec.exe):
    "Error:
    Unable to load test environment adapter 'flxCVIadp.dll'. Run setup to re-install or remove this adapter.
    Could not connect to TSAutoMgr.exe server. DCOM permissions might be incorrect because of configuration changes for remote execution.  To fix this issue, ensure that the current user is in the default DCOM access permissions or that no users are in the access permissions section of the dcomcnfg.exe dialog box.  You can use the dcomcnfg.exe program, located in the Windows System directory, to change DCOM access permissions.
    Error code: -17501, Unexpected Operating System Error." 
    When this error happens, we can't run any calls to CVI code from within the User Interface.
    We are running Windows 7.  We don't see the error if we run TestExec.exe from the default location:
    C:\Users\Public\Documents\National Instruments\TestStand 2013\UserInterfaces\Full-Featured\CVI
    We get the error message if we copy the CVI directory to somewhere else on the C:\ drive (C:\MyUserInterface for example).  The error happens when we run TestExec.exe directly, but it does not happen if we are already running Labwindows/CVI and we launch TestExec.exe from CVI.
    We are seeing this error with both TestStand 4.2.1 and TestStand 2013 running on different PCs.  This error happens on Windows 7, but not Windows XP.  Though we get the same error with our custom user interface, we see the same error with the stock CVI full-features user interface provided by NI.
    Any ideas about why we can run this from the TestStand directories, but not any directory on our C:\ drive?
    Thanks,
    Peter

    Hi Peter,
    Based on the error messages it looks like this might be a Windows 7 security issue, which would be why it doesn't occur on XP since security is handled differently in that OS. Have you gone into dcomcnfg.exe and checked the DCOM permissions as described in the error message?

  • Admin vs User interface

    We are currently in the process of implement SIM/SAM and we would like to know what is the standard approach to implementing user business rules:
    - developer custom user interface where all business rules applied
    - enhanced the administrator interface to include business rules
    If the first option is taken, does it mean that the admin interface can overwrite all business rules?

    So, am I right here, in the admin account one does a software update and that update also effects the same software in the other account?
    Yes, unless specifically installed for one User only, all accounts can use the APPs installed, but of course managed accounts may need to be given access by an Admin account.
    So - I go to system prefs and create a new account and give it admin privileges. Then when I log in to that account it has all the apps and everything available to it but not the documents on the other account? Am I understanding this correctly?
    Correct.
    When I do SuperDuper smartupdates I assume I only need to do it in the account I use - which would now be the old/original admin account not the new (Clean) one?
    I haven't used the smartupdates, but I suspect it wouldn't matter which Admin account you used, but certainly the old one would work.
    We put no banking or other sensitive info on the laptop we travel with; nor do we have this on the G4 either really.
    Then I see no advantage of running in a non-admin account for you, though having a second one one for emergencies is a good idea.
    Would Secure Virtual memory (I think I have that right) protect that anyway?
    If this is off, then any time you enter a password it’s possible the system will write that password out in a block of memory it’s dumped to a file in /var/vm and, thus, makes the password recoverable. Using secure VM means those files are encrypted and it’s near-impossible to discover a user’s password from the swap files.
    In theory that sounds good, but that's mostly academic if you're not using Filevault and/or a horrendous password without Auto Login set, AND not storing passwords in Keychains or Browsers Autofills.

  • Configurator User Interface

    can any one tell how can I create a new Custom User Interface in th oracle configurator developer with out using the standard UI Templates.

    Hi,
    I think this is a bit old posting , I hope by this time you would have solved the problem.
    Are you getting any errors when you press the Test Button?
    If not please see whether the % of Layout Area allotted for Navigation Frame, Make sure that its not less than 30.
    I don't see any other reasons why its not getting displayed.But If there is any error coming up in the run time configurator screen then would be able to help you more.
    Thanks,
    Chanchal
    [email protected]

  • To add custom user attributes in portal user details

    Hi,
    I am looking at the possibility of adding custom user information attributes in User details of Portal User. By default there are few tabs provided ( general, account info, contact info, additional information.....). I am planning to have another extra tab (custom tab with some custom fields ) to be developed and accessible through external application. My data source would be AS database.
    Not necessary that the custom fields to be visible in the UI. but should be manipulated programatically.  
    Request inputs on feasibility and also the approach that could be followed.
    TIA,
    -Naresh

    Hi,
    Follow the link:
    http://help.sap.com/saphelp_nw70/helpdata/EN/44/0316d50bbe025ce10000000a1553f7/frameset.htm
    This explains the process of adding the custom attributes in user admin.
    Thanks,
    Rajani

  • Windows Phone - Cannot bind custom user controll with listview item source property

    It is Windows Phone 8.1 (runtime)
    I have some problem of binding custom user controll with list of data. I'll make it simple as I can.
    My problem is that somehow if I use DataBind {Binding Something} inside my custom controll it will not work.
    I need to transfer binded data (string) to custom controll.
    It is strange that if I do not use DataBind, it will work normally. Eg MyCustomControllParameter = "some string" (in my example 'BindingTextValue' property)
    Does anyone Know how to bind custom user controll with inside ListView with DataTemplate.
    Assume this:
    XAML Test-Main page
    <Grid  Background="Black">        <ListView x:Name="TestList" Background="#FFEAEAEA">                    <ListView.ItemTemplate>                <DataTemplate>                    <Grid Background="#FF727272">                        <local:TextBoxS BindingTextValue="{Binding Tag, FallbackValue='aSource'}" local:TextBoxS>                    </Grid>                </DataTemplate>            </ListView.ItemTemplate>        </ListView>    </Grid>
    XAML Test-Main page c#
    public sealed partial class MainPage : Page    {        List<TTag> tags = new List<TTag>();        public MainPage()        {            this.InitializeComponent();            this.NavigationCacheMode = NavigationCacheMode.Required;        }        public class TTag        {            public string Tag { get; set; }        }        private void InitializeAppData()        {            TTag tag = new TTag() { Tag = "hello world" };            tags.Add(tag);            tags.Add(tag);            tags.Add(tag);            TestList.ItemsSource = tags;        }             protected override void OnNavigatedTo(NavigationEventArgs e)        {            InitializeAppData();        }           }
    User Control XAML:
      <UserControl    x:Class="CustomControllTest.TextBoxS"    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"    xmlns:local="using:CustomControllTest"    xmlns:d="http://schemas.microsoft.com/expression/blend/2008"    xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"    mc:Ignorable="d"    d:DesignHeight="300"    d:DesignWidth="400">      <Grid x:Name="LayoutRoot" Background="#FF4F4F4F"   >        <RichTextBlock x:Name="MyTestBlock">        </RichTextBlock>    </Grid></UserControl>
    User Control c#
    public TextBoxS()       {            this.InitializeComponent();            LayoutRoot.DataContext = this;        }        public static readonly DependencyProperty BindingTextValueProperty = DependencyProperty.Register(                                         "BindingTextValue",                                         typeof(string),                                         typeof(TextBoxS),                                         new PropertyMetadata(default(string)));        public string BindingTextValue        {            get            {                return GetValue(BindingTextValueProperty) as string;            }            set            {                SetValue(BindingTextValueProperty, value);                //This method adds some custom logic into RichTextBlock, pointed correctly                SetupBox(value);            }        }
    Thanks for helping ;)

    If you use a built-in control rather than your custom control, does binding work? You should verify that first.
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • IS it possible to provide URL link in Notification Mail and logon to SAP

    Hi firends,
        when the user gets a notification mail to his outlook,
    he opens that notification mail in outlook.
    Is it possible to provide a URL Link ? in that notification mail.
    When the user clicks on that URL LINK, then is it possible to open the SAP Initial Screen,
    where user can provide his User name and Password. and logs on to the SAP.
    If these things are possible.
    Please guide me step by step.
    Thanks in Advane,
    Ganesh

    Refer the following links for Extended Notifications..
    /people/saujanya.gn/blog/2006/12/19/how-to-get-work-items-your-outlook-inbox
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/d5/581ee8d56f1247bf34cfcd66d16d81/frameset.htm
    Specific answer to your question is
    Maintian the link in "INBOX_LINK_URL" parameter in the "General Settings".
    Regards,
    PR.

  • Is it possible to add a custom menu item to built-in apps like addressbook, safari etc in iPhone

    Is it possible to add a custom menu item to built-in apps like addressbook, safari etc in iPhone

    Apple expects the OS to remain constant for all users - helps to maintain a quality experience. Devs are not allowed to make changes to built-in apps.

  • Custom User Groups in GRC Access Control Risk and Remediation 5.3

    Hi all,
    Does anyone know how I can mass upload assignments of users to custom user groups in R&R?
    We have a requirement to group users in a different way to the SAP user groups so I wanted to create new 'custom' user groups in R&R and allocate specific users.  We're talking about 3000 users so I can't do it manually.
    Regards
    Amir

    Hi Amir,
       I don't think there is direct way to do this. You might be able to pull this off by going through the back-door (database update). Talk to SAP support about this and they should be able to provide you with the tablenames which gets affected by users and user groups upload.
    Regards,
    Alpesh

  • Garageband custom "user-loops" files missing

    I'm using Garageband '09 (Version 5.1 (398) and I am having trouble locating my custom "user loops" files.
    I know that custom made apple loops are saved in
    Library/Audio/Apple Loops/User Loops
    I have about 100 loops saved in the folder, but in Garageband I have over 200 saved custom made loops that work fine. I am able to use all of the loops, only about half of them have files in the correct place.
    Doing a spotlight search does not find anything, even when I search for the custom loop name exactly and search "This Mac" and "Library".
    One strange thing I've found is when viewing the loops browser, at the top there is a dropdown labeled "Loops" that offers the filters "My Loops" and "Shared Loops on my Mac". It seems that I can only find the files for "My Loops" and the "Shared Loops on my Mac" are the missing ones.
    Is there another place these files could be saved? I can use them in Garageband so they must be somewhere.

    How can I create loops that are "My Loops" vs "Shared Loops on my Mac" on purpose.
    Check your Preferences setting:
    In the "Loops" tab of the Preferences panel - the "My Apple Loops" option.
    If you share your loops with all users on your mac (users havg different accounts) then the loops will be installed in the System Library, but if you do not share, your loops will be installed in your user library. If you log in from a different account you will not be able to use them.
    Regards
    Léonie
    I don't have Logic installed, but both installation places should make it possible for Logic and MainStage to use the loops. It is the standard place where applications are looking for Apple Loops.

Maybe you are looking for