Is it possible to put a 1TB hard drive disk in my mid 2009 13 inch macbook pro?

I want to upgrade my hard drive disk (macbook pro 13 inch mid 2009) from 160 GB to possibly a 1TB. If I bought a 1TB hard drive disk would it work in my computer and would apple install it for me? If not is there anywhere in manhattan thats an afiliate of apple that would do it? I checked out Ifixit.com and was looking at how to do it on my own but honestly I'd probably screw it up. Any help would be much appreciated.
Thanks
Pete Benedict

Helmet20 wrote:
If I bought a 1TB hard drive disk would it work in my computer
yes.
would apple install it for me? If not is there anywhere in manhattan thats an afiliate of apple that would do it?
they would not install a hard drive you purchased somewhere else, however I'm sure a computer repair shop in manhattan that would be willing to.  If you are looking for an Apple affiliate, or an AASP, here: https://locate.apple.com/service/?pt=4&lat=40.7902778&lon=-73.95972219999999.  Call them and ask if they would do it for you.

Similar Messages

  • Multiple hard drive failures on multiple mid-2012 13" macbook pros

    I have a mid-2012 13" MacBook Pro (500GB hard drive), which is actually the third one I've owned in two years. The hard drive on my first laptop failed and was replaced at least five times (I lost count) before Apple agreed to just replace the machine after about a year and a half. Thinking that was the end of it, I was unpleasantly surprised when the second machine's hard drive failed after just a month. Luckily, Apple was willing to replace it right away since it had only been a month. Now it's been about four months since I've gotten my third laptop, and its hard drive has just failed.
    At this point, it seems like the problem is something I'm doing, but I don't see how that's possible - I don't handle my laptop any differently than the average college student, and many of my friends who own MacBooks haven't had this issue. I don't have above average knowledge of computers, and Apple representatives haven't offered any solutions aside from just replacing the hard drive, so I know that that's exactly what they're going to do if I take it to the Genius Bar again. I know enough to see that the issue isn't the hard drive, and I'm so fed up now that I just want to get rid of this laptop altogether. Does anyone know of anything that could be causing the problem, and is there anything else I can do?

    The range of reported problems using an external monitor or projector and the mid-2012 MBP is dizzying. The only way I've found to use an external monitor is to shutdown and plug the monitor in prior to rebooting. Any attempt to attach a monitor (or projector) after I'm up and running fails. All the trashing of plist files, resetting PRAM, etc etc. doesn't solve anything.
    And turn off energy savings. If my MBP goes to sleep, it won't find the external monitor when waking. I have to reboot again.
    Bush league problems. Our only encouragement is that it appears to be a software issue, since booting into Windows solves the problem. So we can hope for a fix. I'm pretty disgusted with Apple here. They've had a lot of time to fix this since 10.8 was released. I've been an exclusive Apple user since 1984. But as they've gotten fat and sassy, their quality control and responsive service has sunk. I can put up with their secretive, non responsive approach if things get fixed. But if they don't, they're headed for the ash heaps.

  • Has anyone had issues with putting a 1TB hard drive into an early 2008 20 inch iMac?

    I have been trying to upgrade my 250GB hard to a 1TB Western Digital Blue hard drive.  So far I have tried the following...
    * CCC clone
    * Super Duper clone
    * Disk Utility clone
    * Fresh install of Mavericks and Migration Assistant
    Each time I do these I am able to boot to the new hard drive externally through holding down the Option key and choosing the new drive.  However, when I install the new drive internally all I ever get is a blinking folder with a question mark upon startup.  I cannot get the new drive to boot when it's installed in the machine.  And, I can't get to Disk Utility when the new drive is installed either.  Once the new drive is installed internally I lose the ability to do anything with the compuetr.  I have tried several different key combinations, but all I ever get is the blinking question mark folder.  The only time I can boot to my new disk is if the old drive is installed internally and the new drive is external.
    Any thoughts?
    Thanks.

    Thanks for your replies!
    Right after I wrote, the dvd player started working again.  With the old HD in, I booted from the disk and went into disk utility to see if I could repair the old HD.  It could not see the old drive.
    So I decided to get brave and try the new HD (sorry I did not see your feedback on the green drives, first).  I got  WD because that's what was in there and I had good luck with WD's in the past. Of course, as soon as I fired up, it spit the dvd out.  I tried 4 times and on the last try it read the DVD.
    The I used the procedure I saw on GIZMODO (http://gizmodo.com/333319/the-secret-of-the-time-machine+assisted-hard-drive-swa p) to partition the drive correctly and start the resore.  I guess I'll know in 4 hours whether or not I succeeded.
    If the green drive works for the time machine swap, should I be good to go?  I went for the green because it was cooler running and the back of the computer always got extremely hot right before it acted up.  Of course, I did a thorough cleaning as part of the repair.
    Gary

  • Can I put a 1tb hard drive in my MacBook 4,1?

    Hello everyone. I was wondering if I can put a 1tb hard drive in my MacBook 4,1. I'm not sure if I have the early 2008 or late 2008 model. Anyway I found a hard drive that meets the physical requirements of my computer but my question is will it work? I am currently runing snow leopard. Thanks.

    The following is quoted from Section 700.10.c of the Magnussen-Moss Warranty Act:
    (c) No warrantor may condition the continued validity of a warranty on the use of only authorized repair service and/or authorized replacement parts for non-warranty service and maintenance. For example, provisions such as, “This warranty is void if service is performed by anyone other than an authorized ‘ABC’ dealer and all replacement parts must be genuine ‘ABC’ parts,” and the like, are prohibited where the service or parts are not covered by the warranty. These provisions violate the Act in two ways. First, they violate the section 102 (c) ban against tying arrangements. Second, such provisions are deceptive under section 110 of the Act, because a warrantor cannot, as a matter of law, avoid liability under a written warranty where a defect is unrelated to the use by a consumer of “unauthorized” articles or service. This does not preclude a warrantor from expressly excluding liability for defects or damage caused by such “unauthorized” articles or service; nor does it preclude the warrantor from denying liability where the warrantor can demonstrate that the defect or damage was so caused.

  • My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD.  When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help!

    My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD.  When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help! Thank you!
    I've also been getting an image with the folder and question mark. I've tried everything on the apple support page but it doesn't seem to work either.

    Well, I tried all of your suggestions and they didn't work -- no surprise because I was trying to backup to my external c.d. disk.  Duh!  The application for the home is in the mail.

  • Multiple Hard Drive Failures in 2 months on 2 MacBook Pros

    I have a mid-2009 13" MacBook Pro with a 320GB hard drive. In early Feb. the hard drive failed suddenly and would no longer mount. My Apple Store replaced it and I restored from a Time Machine backup. A week later the hard drive failed again. It was again replaced, and they order a completely new machine. On the second restore I did not restore from Time Machine but rather moved the files I wanted, iTunes, iPhoto, documents, as to not bring along bad system files. The new computer came in and I set it up as a new machine and transferred files from the old Time Machine but did not do a full restore. I then erased Time Machine and ran a fresh backup. Two weeks later the hard drive on the new machine failed. It locked up so I powered down and upon restart got the file folder with a question mark and the hard drive was nowhere to be found. The Apple Store kindly replaced my hard drive for the third time, the second hard drive in a two week old computer. The asked me to not move any files from Time Machine for a couple of weeks.
    I now have my fourth hard drive in 2 months and I do not want a fifth. In fact, the first computer may have failed three times. At this point I don't remember. The Geniuses at the Apple Store are stumped so I'd appreciate any input. What the heck is going on here?
    My theories
    1. Simple bad luck
    2. A file in iTunes, iPhoto or an Office, iWork, pdf...... is causing the failures
    3. Restoring Office from Time Machine is killing it.
    4. I'm doing something to cause physical damage. I've never dropped it and I handle it fairly carefully and in the same way I've handled every other Mac laptop I've had in the past 10 years.
    5. Moving the computer immediately after closing the lid to sleep. I've been told that the disk doesn't stop spinning until the sleep light pulses and moving it around too much too soon can cause damage. I've been doing this every laptop I've had and in the past much more aggressively as a grad student hurrying out of class rooms.
    6. My most recent idea, not having the Put hard disk(s) to sleep when possible button checked in System Prefs. I unchecked it for better performance but maybe this is causing the hard drive to never lock when sleeping so when I move it around the heads bang on the disks.?
    7. Something environmental. Using it on my lap? Setting it on the couch or ottoman while running? A power surge?
    Please help. Thanks a lot.

    Dunno about your hard drive issue.
    However, everything you list in number seven are definite no-no's. All of them, except power surge, will cause heat related problems.
    Have a nice day.
    Boyd
    Message was edited by: Boyd Porter

  • Is it bad for the hard drive or the processor to carry my macbook pro while it is asleep?

    I know for a fact that old notebooks used IDE hard drives and thus if they are carried while in sleep mode, it might damage the hard drive. For a Macbook Pro, is it dangerous at all to carry it while in sleep mode? Does it affect the processor or the hard drive or any other hardware at all?
    Thanks,
    j

    Welcome to Apple Support Communities
    In general, it is dangerous to carry any laptop with a physical hard drive while it is turned on, as the hard drive might get damaged. However, the MacBook Pro with Retina display (the same applies to the new MacBook and all MacBooks Air) uses flash storage, so you can just put the computer to sleep and carry it (you can do it even if it is turned on): no parts will be damaged.

  • My Western Digital external hard drive suddenly stopped showing up on my Macbook Pro and disappeared from Disk Utility. It works on a PC.

    My Western Digital external hard drive suddenly stopped showing up on my macbook pro and it disappeared from disk utility. I have tried making invisible files visible but nothing has worked and my hard drive shows up on a PC but not my Mac anymore.

    What is the manufacturer of the external and how old is it? Does it have its own AC power supply or is it USB bus powered?

  • What Internal hard drive can I use to upgrade my macbook pro 2010

    what Internal hard drive can I use to upgrade my macbook pro 2010

    You may use any 2.5" SATA notebook drive not higher than 12.5 mm that uses either 1.5 or 3.0 Gb/s interface. Visit OWC for available options and prices.

  • Can i use my ext hard drive USB 2 on the the new macbook pro laptops with a USB3

    can i use my ext hard drive USB 2 on the the new macbook pro laptops with a USB3

    stephan ach wrote:
    but i read that there are lots of problems with the new macbook pro. i  have all my data on ext. la cie hard drive. i wont have a problem reading them?
    What problems specifically? If you have a problem you should start your own thread and explain the problem in detail.
    External USB devices including hard drives and DVD work fine on the new Macbook Pros.

  • Is it possible to get a 1TB hard drive installed into my Macbook Pro Retina?

    I am a photographer and I have a lot of photos and its hard to store them all.  I have a back up drive I currently have my iPhoto library on, but it crashes a lot.
    Can I get an internal drive installed? How much does this cost?

    Welcome to the Apple Support Communities
    The MacBook Pro with Retina display can only use flash storage because a hard disk doesn't fit onto this computer. Unfortunately, the only thing you can do is to store the photos onto an external disk, if they doesn't fit onto your flash storage.
    If your external disk is slow, you may want to buy a Thunderbolt external disk. It's much faster than a USB external disk and you shouldn't notice any problem anymore with it

  • WD 1TB not recognised on 13" macbook pro retina (late 2013) even though it is exFAT file structure. The same drive is recognised on iMac and an old Dell laptop. I also have a seagate 2TB external hard drive (powered) that is recognised by my macbook pro.

    I just bought a late 2013 macbook pro retina 13" a few days ago. I am trying to transfer all my music from my old Dell laptop. I formatted by 1TB Western Digital MyPassport to exFAT to allow read and write on both operating systems. The 1TB WD My Passport is recognised by both my Dell and iMac but not my new macbook pro retina 13 (late 2013).  My 1TB WD My Passport is USB 3.0 with USB 2.0 backward compatability. I also just bought a 2TB Seagate Desktop Backup Plus (which is powered) for backing up and extra file storage, THIS WORKS! I don't understand how this works on my macbook pro but my 1TB western digital my passport doesn't. PLEASE HELP!! I have done full formats as well (not quick ones) which take nearly 8 hours. PLEASE HELP

    Is there a pattern to the time of day or other detail that may be
    traced back to a OS X system cause of this odd phenomenon?
    Are there any copies of system files on any of the attached USB
    external drives? Any libraries, such as iTunes, iPhoto, etc?
    Once the drives are indexed by Spotlight, are their permissions
    ignored by the OS X? Content, if neutral, should not affect the
    wake or sleep cycle; especially if they're ignored by the OS X.
    Could there be a bad cable or other component? If so that would
    be a difficult process of elimination to detect it. Usually replacing
    most suspect components in the USB stream (external to Macs)
    is a rote way to mechanically test that idea; & not 100% sure.
    Does the equipment all have a good ground to the utility or house
    electrical field? An intermittent ground may affect more than sleep.
    Hard to say at this point. Maybe a late-night talk radio guru on
    remote viewing could peer into your situation and sleuth it out?
    Sorry to have run out of ideas, but the process must be electrical
    & mechanical to some extent. - Or perhaps odd software inspired.
    Do you have any phone-home spyware items inside, just jumping
    at the chance to spill your information? Little Snitch may help.
    PS: Perhaps the computer needs to go into Apple & have a genius
    or product specialist at AASP test the unit thoroughly... BlueTooth?
    see:
    https://www.google.com/?gws_rd=ssl#q=Wake+reason:+XHC1
    Good luck & happy computing!
    edited 2x

  • My external hard drive won't show up on my MacBook Pro

    So, I'm trying to transfer my music from my PC to my MacBook Pro. I put all my music on an external hard drive, but for some reason when I plug it into my MacBook it won't show up on the desk top. I've already changed my preferences in Finder so that hard drives and disks will show on the desktop, but still nothing. I looked in utilities to see if the hard drive was there, and still nothing. The hard drive is a Toshiba and is fairly new, the light goes on when I plug it into my laptop, so I'm very confused. Can anyone help me with my predicament?

    Check that the data cable is securely inserted at both ends.
    Try a different cable.
    If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
    If you're connecting it directly, try a different port.
    Disconnect all other devices on the bus, or as many as possible.
    Test the drive with another Mac. Test another drive with this Mac.
    If the drive is bus-powered, but has an AC adapter, connect the adapter.
    Boot into Recovery and launch Disk Utility. Is the drive recognized?
    If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

  • Sata III hard drive cable compatible with older generation of macbook pro

    Would my macbook ( 17 in mid 2009 ) be compatible with a new hard drive cable ( sata III ) ? I upgraded my hard drive to Samsung Pro 840 and wanted to upgrade my sata II cable to a sata III for faster read and write. Is this possible?

    Dave The Newbie,
    replacing the cable will not increase the interface speed, just as putting racing slicks on a minivan won’t make it a dragster. I have the same model SSD in my Mid 2010 MacBook Pro, and my MacBook Pro’s SATA interface is limited to SATA II, just like yours. Unless you’re planning on mainly running disk-bound apps, it’s not something that you’ll need to worry about — just enjoy the SSD as is.

  • What is max internal hard drive transfer rate compatible with a 2007 MacBook Pro?

    In attempt to upgrade my mid-2007 MacBook Pro (Intel Core 2 Duo), I bought a Seagate 750GB listed as compatible with my computer on MacSales.com . . .
    Seagate Momentus XT ST750LX003 750GB 7200 RPM 32MB Cache 2.5" SATA 6.0Gb/s Solid State Hybrid Drive -Bare Drive
    Installation appeared to go well and I ran an extended hardware test with no issues found.  However, the drive is listed at 5.46 TB (would be nice) and I get an input/output error when attempting to partition.  I can initiate an erase, but after the time I would suspect it would take to erase the drive, I get an input/output error - it seems to appear after the first 750 GB of the '5.5 TB' was erased.  At all times, the drive is not recognized when I attempt to install OS X from original discs.
    I suspect the 6.0 GB/s transfer capacity of the hard drive is not compatible with the MacBook Pro.  The drive came with 4 jumper pins but no jumper and no label diagram to set a slower transfer rate.  I called Seagate, Newegg, OWC, and Apple, but no one has compatibility info for my MacBook Pro.  To them, it appears I am running the first tests of this new technology with an 'older' MacBook Pro.
    My MBP has had no issues - I'd like to keep her going with the optimum internal hard drive capacity, but don't necessarily want to set up a test bench in my house (though my kids would enjoy destroying it) and pay several shipping and restocking fees to test new hard drives.
    The original drive had a 1.5 GB/s transfer rate.  Does anyone know the maximum transfer rate compatible with a 2007 MacBook Pro?  3.0 GB/s?  1.5 GB/s?  Thank you.

    No spinning hard drive will transfer data faster then 60-80MB a second. The XT models have a flash storage area that is used when reading and writing data that can make it Appear faster in some situations. That flash memory if only 8 or 16GBs in side, I forget which one.
    The drie is rated to work on 6GB SATA bus but it certainly can not transfer data that fast. It should be backword compatible to work on slower buses.
    Your drive is 750GBs in size. Not wure where you are getting this 5.5TB (that is 5.5 Tera Bytes which is 5500 Giga Bytes. Your drive is under 1TB)
    What are you using to partition the drive? Disk Utilities from the original install DVD?
    You need to install on your old drive, Update it from the Apple Website then clone it to the new drive. The version of OSX you are using may not function correctly with that large of a drive. Or get yourself a copy of Snow Leopard, retail disk for $29 from Apple, and do all the partitioning and installing with that version od OSX.

Maybe you are looking for

  • How do I create an automator variable for a path that includes a date?

    I like to use Image Capture to scan documents into a hierarchy of folders under my ~/Documents directory that are organized by year and document type.  For example, I have ~/Documents/archives/2011      /Misc      /Utilities and ~/Documents/archives/

  • Link to Web Analyzer from rsrt or query designer does not work.

    If I start with the transaction RSRT a query in the Java Web would get the following error message: Java Runtime Error But if I had started earlier browser, the portal there is no problem. Is this a SSO problem? The same problem I have when I would r

  • Moving deployed webapp using links

    hi, we are using WLS6.1_SP2. We try to move files of an existing deployed webapp to another place (e.g. from WL_HOME/config/server/applications/example to /opt/app/example) and replace the deployed application directory using a symbolic link (e.g. ln

  • Webdynpro for java workflow

    hi experts, do we have any concepts of webdynpro for java workflow(UWL), if yes, how can we do it pls guide me how we can proceed (implement) , step by step thank you in advance, vijai

  • IPAM does not show all the dhcp scopes

    Hello, I have the following strange behavior. I've installed IPAM on a new server (2012 R2), all the acces rules are completed. But when i'm looking to the DHCP scope, not all off the scopes are included. For the moment its not possible to upload scr