Is it possible to put a marker next to plug ins?

I always have the problem of forgetting which sounds I like and which I don't. Rather than writing them all down on a notebook, I wonder if there's a way to put some sort of marker next to sounds you like and want to you in the future?

Yes, within a plugin in logic, the top left corner should have a little arrow somewhere. Click the arrow and it displays a little pop down preset menu type of thing. In fact, the built in plugins have preloaded factory presets in this menu. To create your own, just get all your settings the way you want, and then click the arrow and select something along the lines of Save Preset (not sure EXACTLY what it says, but you'll get it) and then it's pretty self explanatory from there.

Similar Messages

TS4498 Is it possible to support Logic in 32-bit plug-ins in future updates? How about to make a bridge built in Logic. I would have long ago moved on to a new version of Logic, but I have the equipment (UAD-1 and Liquid Mix), which are not run on the Loq

Is it possible to support Logic in 32-bit plug-ins in future updates? How about to make a bridge built in Logic. I would have long ago moved on to a new version of Logic, but I have the equipment (UAD-1 and Liquid Mix), which are not run on the Loqic X. So I would suggest to make a bridge in Logic X. As it was in version 9 of the Logic.

In addition.. Focusrite have stated they will not be releasing a 64bit version of Liquid Mix as they consider it outdated software these days.... even though at one point a limited release beta version had a 64bit AU version included but it was so unstable it was rapidly dropped...
However the 32bit to 64bit bridge plugin 32 Lives, states it will handle and 'convert' the Stereo version of Liquid Mix to 64bit but not the Mono version... within LPX
http://www.soundradix.com/products/32-lives/compatibility
Finally, like others here, I would be extremely surprised if Apple added 32bit AU support back into LPX.. That '32bit tech' is long dead and gone....in terms of modern DAWs... as it is in other DAWs such as the recent PT versions...

My last computer died, but we've been able to transfer my files onto an external hard drive to put onto my new computer.I have now got exclamation marks next to 100 songs which I downloaded from Frostwire years ago. How can I fix this?

After my brother transferred all my files from my old computer to an external hard drive, he then put them onto my new computer. It appears that 100 songs which I downloaded from Frostwire years ago have the exclamation mark next to them. I cannot find the files on my new computer, and cannot remember where they were saved to on my old computer as it was over 3 years ago. I have also tried to consolidate the files as I've found people suggested, but that is not working. I have also read that you should tell itunes that you are moving the music, but my old laptop cannot be read when it is on. Is there any other way tofix this issue? I don't want to have to buy over 100 songs which I already have.

After my brother transferred all my files from my old computer to an external hard drive, he then put them onto my new computer. It appears that 100 songs which I downloaded from Frostwire years ago have the exclamation mark next to them. I cannot find the files on my new computer, and cannot remember where they were saved to on my old computer as it was over 3 years ago. I have also tried to consolidate the files as I've found people suggested, but that is not working. I have also read that you should tell itunes that you are moving the music, but my old laptop cannot be read when it is on. Is there any other way tofix this issue? I don't want to have to buy over 100 songs which I already have.

HT3529 How do I sent text messages to me as an email? I have tried this by chosing Edit, then putting a check mark next to the text to send, entered my email and it goes back to the phone as a text msg, never comes to my email in box?

I have tried to send a text that I received to my email address by hitting, Edit then placing a check mark next to the text to send, entered my email address and hit the send icon. Three times, the email has come to me as a text and never appears in my email inbox. Help please!

I think you're asking this:
You received a text message. Now you would like to copy the text message's information and receive it as an email.
You would do that by copying the text message to your clipboard (hold down the text bubble and select "Copy"), creating an email message, and pasting that text into the body of the email message and sending it.

I get an error message when I sync my iPhone 5 with itunes on a Windows 7 laptop. When I go back to my music there are exclamation marks next to many songs. I have reinstalled iTunes

I get an error message when I sync my iPhone 5 with iTunes on my Windows 7 Samsung laptop. I recently backed up all of my data using Samsung Recovery Solution 5 to an external hard drive so that I could restore my laptop. I put all of my data back on the restored laptop and reinstalled iTunes. After the error message that says that certain items could not be found and the "sync" is finished I go back to my music in iTunes and there are exclamation marks next to many songs. I follow some instructions regarding the Edit - Preferences - Advanced settings and the exclamation marks go away until I try to sync my phone again. Then I get the same error message and the exclamation marks return. I have uninstalled and reinstalled iTunes and the same thing happens again. I am about to schedule an appointment with the Genius Bar but would like to avoid that if possible. Thank you in advance for any help.

Hello Courtney,
Thank you for the details of the issue you are experiencing when syncing your music to your iPhone. It sounds like iTunes is not able to locate the original file for the song to transfer it to your device. I recommend reviewing the following articles to locate you music files on your computer:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/ts1408
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Thank you for using Apple Support Communities.
Best,
Sheila M.

Is it possible to put two different colors in tree parent node background and child nodes background?

Is it possible to put two different colors in tree parent
node background and child nodes background?
Any help will be very helpful.
Thanks

Hi PanosE,
Yes, you can set up another Standard Edition Server in child domain and then deploy pool pairing.
You need to deploy a new Front End Pool for the new Standard Edition Server.
A similar case for your reference.
https://social.technet.microsoft.com/Forums/office/en-US/eca4299c-8edb-481e-b328-c7deba2a79ba/lync-2013-standard-edition-lync-fe-pools-in-multiple-domain-single-forest-senario?forum=lyncdeploy
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Songs stored in the cloud have a exclamation mark next to them??

I want to cancel my subscription to iTunes Match and need to download all my songs (over 10,000).
The problem is, that there is an exclamation mark next to 90% of the songs stored on iTunes Match.
In order for me to download a song I have to double click the track with the exclamation mark, which gives me this error message:
'The song “SONG NAME” could not be used because the original file could not be found. Would you like to locate it?'
and then click cancel. Only then will the song show a cloud icon with an arrow and the song will begin to play and I can choose to download it.
This will take forever to double click every song one at a time and press cancel to the error message. Is there a way to have iTune recognize the songs on iTunes Match only, and not on my computer?
Im using the newest version of iTunes (12). Any help is appreciated.

PERFECT! This is exactly what I was trying to do. Now everything is available for download. Thanks Jimz!
One more thing to mention....I tried updating the tags with the files set in their location on my hard drive, in hopes that it would push those updated tags to the Match library. But in reality, it is the opposite. When you update the ID3 tags this way , it is only updating the locally stored file's information. Once the server syncs with iTunes Match, the local copy you just edited is overwritten with the the songs ID3 it had when originally uploaded to Match.
The only way I found to get around this is to move the local copy (not delete from within iTunes because it will just re-reference the local file once you select or play the song from the Match Library) , and then directly update the ID3 tag which was originally uploaded to iTunes Match.
The iTunes Match server seemingly has a file structuring system as with local iTunes (aka, the same problem I was having) because even if you delete the iTunes Match file/song, edit the local ID tag, then re-upload the same file again with the new tag information that you changed, it still remembers the old version of the file's information that you just deleted. Hence, iTunes Match's one of many Wonkinesses.
I tried every other possible way to update the ID3 tags and that was the only way that nothing was becoming overwritten in the syncing process.
For anyone reading this, your best bet is too 100% have your ID3 tags the way you want them before uploading anything to Match. If not, youre going to have a **** of a fun time changing anything afterwards. Unfortunately, I did not figure this out until after I uploaded 1000s of songs.
Thanks again for all your help!

When I view "On this iPod" on my iTunes, nearly half my songs have an exclamation mark next to them. Does this mean I have to go back, download these songs again and upload them to my iPod again?

I've never had this problem before but today, when I connected my iPod to my computer and uploaded some new music to it, I finished and ejected the iPod properly but about 6GB of music was missing. So I connected it again and when I went on to "On This iPod", the songs that were missing were named on there but had an exclamation mark next to them. Why is this and how do I fix it?

I posted this in the iPhone forum seeing someone had an issue there about this. I had the exact same issue but with my iPad. It was really annoying. I had to delete all the songs in iTunes that it thought were still on my iPad, but weren't. Then I was able to manually put the songs back onto the iPad. If I didn't delete the songs with the exclamation point, then the syncing was very slow and sometimes would freeze when "waiting for changes to be applied".
About a third of my music was deleted (about 6GB) and so were some of my videos. I updated to the most recent iTunes too. I've never had this issue before and did take a lot of time. I'm running Windows 8.1 (I know - has many issues) and I wondered if that maybe did something?
I don't think you have any option than to delete the songs with the exclamation points and put them back on the device. Hopefully Apple will figure out the issue - ios 7.0.3 or the new iTunes.

Is it possible to change a marker's color after the fact in Prelude???

I absolutely love Prelude as a program for logging my footage. I have a number of markers that have different colors but I'd like to know if it's possible to change a marker's color after it's been made. I know that this can easily be done in Premiere, but why not in Prelude???
In Premiere you can easily change a marker's color even way after after the marker was made...
...so why can't you change a comment marker's color in Prelude?
Conversely, why is it that Premiere doesn't respect the marker colors made in Prelude and instead defaults them all to green? This should be addressed in the next update.
Otherwise, there's no reason to have multicolored markers in Prelude if they all get changed to the default green once they appear in Premiere.

I know this is very old but I’m trying to clean up old posts. Did you ever solve this? If so it would be good if you could post the solution to assist others. If not, at this
stage, as nobody has answered, I would recommend that you call Intune support.
You will find your local Intune support number here
http://technet.microsoft.com/en-US/jj839713.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Is it possible to put Yahoo/Google in the Dock?

Hi! I have a brand new loaded iMac and I use Firefox more than Safari. I use "Little Fox" as it gives much more usuable viewing area. Anyway, I love our iMac, but i miss the ability to place stuff on our desktop top. Is it possible to put Yahoo and Google in the dock and connect directly? I currently have a Firefox Icon in the Dock and have Yahoo/Google bookmarked. Thanks, Bill

Click and drag the icon next to the yahoo/google address in the address bar to the dock. Go all the way to the right and space will be made, let go, and then you can click that icon in the dock to automatically go to google or yahoo.

Yellow exclamation mark next to project item

I inherited a LabVIEW project from someone who's no longer at my company, and the app it generated has been used for years here. Unfortunately, when I open the project in LabVIEW I see no source files, but I do see 2 yellow exclamation marks next to [the only] 2 items in the project. If I select either of these items then right click on them and select explain warning the below message box pops up. By the name of the 1st one it seems highly probable that it's is associated with something generated by the former employee. The 2nd one may be generic. Either way, how can I get more info about what these project items are supposed to be (i.e., path & filename, or something like that) so that I can try to find them? Secondly, is it possible that because of these errors the list of VI's that comprise this project are not shown? Is there any kind of error that causes the list of VI's in the project to become hidden?
Thanks for any help in figuring out what's wrong and fixing it.

Okay... I found the target-singlerate.html file in the project folder hierarchy (but not listed as a component of the project). Here's what's in it. Does this shed any light on anything?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Draft//EN">
<HTML>
<HEAD>
<TITLE>Target VI</TITLE>
</HEAD>
<BODY >
<H1>Target VI</H1>
Target VI<P>
<TABLE BORDER=1 BORDERCOLOR = #000000><TR><TD>
<OBJECT ID="LabVIEWControl" CLASSID="CLSID:A40B0AD4-B50E-4E58-8A1D-8544233807B1" WIDTH=507 HEIGHT=384 CODEBASE="ftp://ftp.ni.com/support/labview/runtime/windows/9.0/LVRTE90min.exe">
<PARAM name="LVFPPVINAME" value="target - single rate.vi">
<PARAM name="REQCTRL" value=false>
<EMBED SRC=".LV_FrontPanelProtocol.rpvi90" LVFPPVINAME="target - single rate.vi" REQCTRL=false TYPE="application/x-labviewrpvi90" WIDTH=507 HEIGHT=384 PLUGINSPAGE="http://digital.ni.com/express.nsf/bycode/exck2m">
</EMBED>
</OBJECT>
</TD></TR></TABLE>
<P>
</BODY>
</HTML>

Is it possible to put a watermark across all pages of a Numbers document (i.e.: DRAFT). Thanks.

Is it possible to put a watermark across all pages of a Numbers document (i.e.: DRAFT)? Thanks.

You can include a water mark when priting by selecting the "Watermark" section from the print dialog.:
If this watermark feature is part of the printer driver and you don;t have this feature you can add a text box, then rotate the box 45 deg, make the font the color and texture you want, then copy and paste it to each page of you document:
You can place this text below ar above other content as you see fit by using the menu item "Arrange > Bring To Front" or "Arrange > Send To Back"

Is it possible to put form fields on layers in Acrobat?

I am creating evaluation forms that have 3 layers. Basically, on page 1 there are 3 buttons for the apprpriate category, and each button turns on a specific layer. The following pages have information to be filled out based on which category layer is selected on page 1.
I've created the documents in Indesign with layers and so far exporting the document and layer buttons works fine . . . I just have to assign the layer action in Acrobat to the buttons. But, when it comes to creating the form fields, I can't figure out how to create them on a layer. When I go into form field editing I lose my layer panel and when I can see the layer panel, turning layers on and off does not affect the fields.
Is it possible to put fillable form fields on layers, so I could have different fields visible based on what layer is showing?

So, if I learn to create this script, can I have multiple sets of fields stacked on top of each other that can be shown/hidden along with the rest of the layer by pressing a button?
Hi,
you don't need to learn JavaScript for such basic actions, they are built-in.

I would like to know if it is possible to put apps which I have on my iPod Touch on a iPod nano

i would like to know if it is possible to put apps which i have on my ipod touch on a ipod nano

No. Apps are only compatible with the iPhone, iPad, and iPod Touch.
B-rock

Exclamation marks next to songs, but I can no longer find them on my harddrive

I have a Win 7 laptop and an old 30GB ipod. Both iTunes and iPod software are up to date. I download songs from CDs that I own and they appear in the proper iTunes folder. However, after I sync my ipod, many of these songs suddenly get an exclamation mark next to them in iTunes and I can no longer find these songs on my hard drive anywhere. In some cases, only a couple songs from a CD get the exclamation mark and disappear and in other cases it is the entire CD. Why is this happening and where are the songs that I downloaded? These is happening over and over. What is the fix?

This means iTunes can't find the location of the files. Try these articles:
http://support.apple.com/kb/TS1967?viewlocale=en_US
http://support.apple.com/kb/TS1408?viewlocale=en_US
Hope these helps my friend.

Is it possible to put a marker next to plug ins?

Similar Messages

Maybe you are looking for