Is it possible to read a corrupted or incomplete dmp file?

I hava an export file but while export operation an error was raised and the export finished with errors. However, until the problem, a lot of tables were exported. I can see from logfile.
Now, is there any way to read this broken dmp file?
when i want to import, the error says:
ORA-39246: cannot locate master table within provided dump files
ORA-39059: dump file set is incomplete
is there anything like DUL for this?

source database and target database are same
Oracle Linux x86 64 and Oracle Version 11.2.0.1
export log error lines:_
ORA-39097: Veri Pompasý iþi beklenmeyen -1423 hatasý ile karþýlaþtý
ORA-39065: MAIN içinde beklenmeyen ana iþlem istisnasý
ORA-01423: kesin okuma içinde fazla satýrlarý kontrol ederken hata ile karþýlaþýldý
ORA-04030: 123404 bayt ayrýlmaya çalýþýlýrken iþlem belleði tükendi (QERHJ hash-joi, kllcqas:kllsltba)
"SYSTEM"."SYS_EXPORT_SCHEMA_18" iþi 06:20:02 konumunda tehlikeli hata nedeniyle durduruldu
import log error lines:_
Import: Release 11.2.0.1 - Production on Sat May 18 01:30:23 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-39246: cannot locate master table within provided dump files
ORA-39059: dump file set is incomplete
first lines of export log
Export: Release 11.2.0.1.0 - Production on Çar Mar 20 23:00:00 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Baðlanýlan: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
"SYSTEM"."SYS_EXPORT_SCHEMA_18" baþlatýlýyor: system/******** directory=yedek dumpfile=full.dmp logfile=full.log network_link=yedek schemas=kecdh
BLOCKS yöntemi kullanýlarak devam eden oran tahmini...
SCHEMA_EXPORT/TABLE/TABLE_DATA nesne türü iþleniyor
BLOCKS yöntemi kullanýlarak yapýlan toplam tahmin: 53.79 GB
SCHEMA_EXPORT/USER nesne türü iþleniyor
SCHEMA_EXPORT/SYSTEM_GRANT nesne türü iþleniyor
SCHEMA_EXPORT/ROLE_GRANT nesne türü iþleniyor
SCHEMA_EXPORT/DEFAULT_ROLE nesne türü iþleniyor
SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA nesne türü iþleniyor
SCHEMA_EXPORT/SEQUENCE/SEQUENCE nesne türü iþleniyor
SCHEMA_EXPORT/TABLE/TABLE nesne türü iþleniyor
SCHEMA_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT nesne türü iþleniyor
SCHEMA_EXPORT/TABLE/INDEX/INDEX nesne türü iþleniyor
SCHEMA_EXPORT/TABLE/CONSTRAINT/CONSTRAINT nesne türü iþleniyor
SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS nesne türü iþleniyor
SCHEMA_EXPORT/TABLE/COMMENT nesne türü iþleniyor
SCHEMA_EXPORT/FUNCTION/FUNCTION nesne türü iþleniyor
SCHEMA_EXPORT/FUNCTION/ALTER_FUNCTION nesne türü iþleniyor
SCHEMA_EXPORT/VIEW/VIEW nesne türü iþleniyor
SCHEMA_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT nesne türü iþleniyor
SCHEMA_EXPORT/TABLE/TRIGGER nesne türü iþleniyor
SCHEMA_EXPORT/TABLE/INDEX/FUNCTIONAL_AND_BITMAP/INDEX nesne türü iþleniyor
SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/FUNCTIONAL_AND_BITMAP/INDEX_STATISTICS nesne türü iþleniyor
SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS nesne türü iþleniyor
. . "KECDH"."HISFSAT" 4.200 GB 13587111 satýr dýþa aktarýldý
. . "KECDH"."IMAGE" 4.327 GB 15270389 satýr dýþa aktarýldý
. . "KECDH"."HLABS" 3.743 GB 35061336 satýr dýþa aktarýldý
. . "KECDH"."KLINIKGIRISIMGONDERILEN" 3.097 GB 24307580 satýr dýþa aktarýldý
. . "KECDH"."MV3ISLEM" 2.813 GB 19920143 satýr dýþa aktarýldý
. . "KECDH"."HFISKAL" 2.769 GB 27210951 satýr dýþa aktarýldý
. . "KECDH"."MV3LOGLAR" 1.362 GB 321743 satýr dýþa aktarýldý
. . "KECDH"."EPIKRIZYAZ" 1.800 GB 244 satýr dýþa aktarýldý
. . "KECDH"."HBILGI" 1.018 GB 4223836 satýr dýþa aktarýldý
. . "KECDH"."ICMESAJEK" 1.276 GB 38554 satýr dýþa aktarýldý
. . "KECDH"."AUDHPISLEM" 805.4 MB 4537386 satýr dýþa aktarýldý
. . "KECDH"."MV3HASTAKABUL" 712.3 MB 3860875 satýr dýþa aktarýldý
. . "KECDH"."HPISLEM" 613.6 MB 3931673 satýr dýþa aktarýldý
. . "KECDH"."ETABSAT" 592.1 MB 5241158 satýr dýþa aktarýldý
. . "KECDH"."HFATURA" 563.4 MB 4634831 satýr dýþa aktarýldý
. . "KECDH"."SNETNOTHL7SOAP" 393.6 MB 79635 satýr dýþa aktarýldý
. . "KECDH"."MV3LOGDETAY" 495.3 MB 3743301 satýr dýþa aktarýldý
. . "KECDH"."SAGLIKNETHATALAR" 450.4 MB 2202541 satýr dýþa aktarýldý
Edited by: 983327 on May 18, 2013 9:02 AM
Edited by: 983327 on May 18, 2013 9:03 AM
Edited by: 983327 on May 18, 2013 9:04 AM
Edited by: 983327 on May 18, 2013 9:06 AM

Similar Messages

Is it possible to import an Oracle 10 (export .dmp file) into Oracle 9 db ?

hi Oracle Guru's
Is it possible to import a oracle 10 (export .dmp file) into an oracle 9 database ?
I tried & got the following error ...
IMP-00010 not a valid export file, header failed verificationperhaps their is a work-around ?
thanks

Hi
You can take export from a previous version and import to a later version. Having said that, there is still a workaround to do what you want.
On 9i server add a connect string for your 10g instance. Then use 9i export utility to export 10g data. That way your export will be compatible with 9i. You can then import the data in your 9i instance.
To create connect string you can either use Net Configuration Assistant or manually edit TNSNAMES.ORA file in your 9i server.
Hope it helps.
Rgds
Adnan

Adober reader shows corrupted bookmarks of pdf files

after upgrading to Mavericks if I open a pdf file with Adobe Reader it will be opened but the bookmarks are somehow corrupted:
they are listed with a grey area besides it and with a big space to the next entry (see image).
How can this be fixed?
In previous Mac OS X version this wasn't a problem, but with Mavericks? .. seems like apple has changed something - and no one knows about it
Example with Acrobat Reader:
with Preview now the bookmarks are displayed (new in 10.9?) but otherwise scrolling through a pdf isn't as comfortable as with Adobe Reader:

As a follow to the above, the problem was related to a file transfer. The PDFs in question were being transfered from a Unix platform to a Windows Server. The transfer was defaulting to ASCII or Text and not binary. Apparently this was never an issue with older versions of Adobe Reader. Once the transfer was switched to binary, Reader X was able to view the files with no missing pages. Something was being stripped from the file that Reader X just didn't like.

Is it possible to read an Oracle dump (.dmp file) on the Web

Hello,
I was wondering if it is possible to interact with an Oracle dump
(.dmp file) via a web application (Java or Coldfusion). Does
anyone know?
Thanks in advance.
Drew
null

http://lmgtfy.com/?q=open+ost+files+on+mac

Read beyond corrupted blocks

Hi all,
We are having production issues with data corruption in one table. We've tried a few things didnt work. We found out that a few records in the table is corrupted and we get invalid row-id and other different messages. We are just trying to see if we can save all the data in the table. Is it possible to read the records beyond a rowid (the corrupted rowid)??
Thanks a lot

Have you tried to export the table to see if it will export successfully ? If so, you can them truncate it and import it back.
Pl also see MOS Doc 28814.1 (Handling Oracle Block Corruptions in Oracle7/8/8i/9i/10g)
HTH
Srini

I have an external hard drive, from Iomega. However, I cannot copy or save any file to it. On my PC it says that is possible to read and write in it, but in my Mac, it says I can only read. can somebody help me?

I have an external hard drive, from Iomega. that I can open and see my files. However, I cannot copy or save any file to it. On my PC I have it says that is possible to read and write in it, but in my Mac, it says I can only read. can somebody help me?
Also, Im a photographer, so I like to name a lot of files at the same time (used to do in on PC and it was very usefull.) cannot find out how to do it on my Mac. Really appretiate if some one can give me a solution! Thanx

Your drive is formatted with the NTFS file system. OS X can read but not write to the NTFS file system. There are third party drivers available that claim to add the ability to OS X to write to an NTFS partition. I have not tried them and don't know if they work.
The only file system that OS X and Windows can both write to natively is the FAT32 file system.

Sychronisation AD - OID: Is it possible to read the user password from AD?

Hi.
We are using the Oracle Internet Directory shipped with the Oracle 9i Database Rel. 2 (9.2.0.1).
I try to synchronise the user accounts from AD to OID using JAVA JNDI. I'm able to read all necessary user information except the user password (MD5 value). Even if I connect to the AD using SSL, it's not possible to read the attribute userPassword.
Is anybody out there who got this work or knows a way (may also be by the use of another programming language or tool) to get the user password out of AD? Is this possible? How does the Oracle Integration Agents accomplish this?
Thanks in advance.
Hermann S.

Hermann,
I am working with this as well, though from AS10g, not RDBMS. According to the OID Administrator Guide chapter 43, page 43-52:
<snip>
Synchronizing passwords from Microsoft Active Directory to Oracle Internet Directory is not possible in the Oracle Application Server 10g release because passwords in Microsoft Active Directory are not accessible by LDAP clients. However, if a deployment requires passwords to be available in Oracle Internet Directory, then the following two methods are recommended:
Build a custom plug-in for Microsoft Active Directory that captures a password change and synchronizes it with Oracle Internet Directory
Manage Active Directory passwords from the Oracle environment. This enables passwords to be available in both Oracle Internet Directory and Microsoft Active Directory because the Active Directory connector can synchronize passwords from Oracle Internet Directory to Microsoft Active Directory.
</snip>
As10g can however look up the password in AD using the "Active Directory External Authentication Plug-In". This is documented in the same chapter.
Hope this helps,
Jens

Possible to read data from a web browser into java?

Is it possible to read data from a web browser such as IE or Mozilla into a java applet for use and manipulation? If it is, could someone please post some documentation I could look at or a snip-it of code I could use? Thanks.

This will read the content from a site:
import java.net.*;
import java.io.*;
class Test {
     public static void main(String[] argv) throws Exception {
          URL u = new URL("http://www.google.com");
          URLConnection uc = u.openConnection();
          BufferedReader br = new BufferedReader(new InputStreamReader(uc.getInputStream()));
          String text;
          while( (text = br.readLine()) != null ) {
               System.out.println(text);
}

Is it possible to read Idocs from SAP R/3 System?

Is it possible to read Idocs from SAP R/3 System? Instead of the aRFC

Unless Hydra emulates ECC sending IDOCS, then you just might want to use the WSMessageListener (http://help.sap.com/saphelp_xmii120/helpdata/en/45/6a86ac88130dece10000000a11466f/frameset.htm) and configure your message processing rules accordingly.

Possible Sequential Read Access for a Sorted Table

Hi All,
I have the following warnings in Code inspector check.
'Possible Sequential Read Access for a Sorted Table'
Kindly provide me the solution to overcome this warning message.
This is my code in BAdi : CRM_ORDER_FIELDCHECK , Method : FIELDCHECK
I am getting the above warning at
READ TABLE lt_status INTO ls_status WITH KEY status = 'E0001'
                                               user_stat_proc = 'ZITRHDQT'
                                               object_type = 'BUS2000114'.
and at
    MODIFY ct_input_field_names FROM ls_input_field_names
                                TRANSPORTING changeable
                                WHERE fieldname NE lv_field.
Please see the below code .
DATA : lt_header_guid TYPE crmt_object_guid_tab,
         lt_item_guid TYPE crmt_object_guid_tab,
         lt_order_i     TYPE crmt_orderadm_i_wrkt,
         ls_order_i     LIKE LINE OF lt_order_i,
         lt_status      TYPE crmt_status_wrkt,
         ls_status      LIKE LINE OF lt_status,
         ls_input_field_names TYPE crmt_input_field_names.
DATA : lv_header_guid TYPE crmt_fieldcheck_com-guid,
         lv_chng_no   TYPE c VALUE 'A',
         lv_field(10) TYPE c VALUE 'ACT_STATUS'.
DATA: lv_status_completed     TYPE crmt_boolean.
To Get GUID
IF is_fieldcheck_com-guid IS NOT INITIAL.
    lv_header_guid = is_fieldcheck_com-guid.
ELSE.
    lv_header_guid = is_fieldcheck_com-ref_guid.
ENDIF.
IF is_fieldcheck_com-ref_kind EQ 'A'.
    INSERT lv_header_guid INTO TABLE lt_header_guid.
    ELSE.
      SELECT SINGLE header FROM crmd_orderadm_i INTO lv_header_guid
                            WHERE guid = is_fieldcheck_com-ref_guid.
      INSERT lv_header_guid INTO TABLE lt_header_guid.
ENDIF.
*To Get the required details
CALL FUNCTION 'CRM_ORDER_READ'
    EXPORTING
      it_header_guid       = lt_header_guid
    IMPORTING
      et_status            = lt_status
    EXCEPTIONS
      document_not_found   = 1
      error_occurred       = 2
      document_locked      = 3
      no_change_authority = 4
      no_display_authority = 5
      no_change_allowed    = 6
      OTHERS               = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE lt_status INTO ls_status WITH KEY status = 'E0001'
                                               user_stat_proc = 'ZITRHDQT'
                                               object_type = 'BUS2000114'.
IF sy-subrc = 0.
    ls_input_field_names-changeable = lv_chng_no.
    MODIFY ct_input_field_names FROM ls_input_field_names
                                TRANSPORTING changeable
                                WHERE fieldname NE lv_field.
ENDIF.
ENDMETHOD.
Regards
Venkat

Hello Blake,
Try this:
READ TABLE lt_action_fld WITH KEY STATUS = '0' BINARY SEARCH.
wf_index = sy-tabix.
loop at lt_action_fld from wf_index.
if lt_action_fld-status ne '0'.
exit.
endif.
delete lt_action_fld index wf_index.
endloop.
Let us know, if this helps.
Rgds,
Raghu.

Is it possible to read digital data using an external clock (PCI-6259 M)?

I’m using a NI PCI-6259 M Series card and trying to write my program in VC++6.0 using the functions in the DAQmx driver.
Question1: Not all functions listed in the NI-DAQmx C Reference Help seems to be supported by my NI-card, where can I find information about which of the functions that are supported?
Question2: I want to read data from a device that clock out data on the falling edge of a clock signal. The clock signal and the data signal are routed to two DIO terminals on the NI-card. The question is if it is possible to read data using the clock as a sample clock? See two code examples below that doesn’t work. In both cases 10 samples are read at once, even if the external clock is not present.
Example 1
// Create tasks
Status = DAQmxCreateTask("", &m_ReadTrimTask);
// Set up read task
status = DAQmxCreateDIChan(m_ReadTrimTask, "Dev1/port2/line0", "", DAQmx_Val_ChanPerLine);
status = DAQmxCfgChangeDetectionTiming(m_ReadTrimTask,"Dev1/port2/line6","Dev1/port2/line6",DAQmx_Val_FiniteSamps, 10);
// Read data
int32 sampsPerChanRead, numBytesPerSamp;
status = DAQmxReadDigitalLines(m_ReadTrimTask, 10, 10.0, DAQmx_Val_GroupByChannel, result, 10, &sampsPerChanRead, &numBytesPerSamp ,NULL);
Example 2
// Create tasks
Status = DAQmxCreateTask("", &m_ReadTrimTask);
// Set up read task
status = DAQmxCreateDIChan(m_ReadTrimTask, "Dev1/port2/line0", "", DAQmx_Val_ChanPerLine);
status = DAQmxSetSampTimingType(m_ReadTrimTask, DAQmx_Val_SampClk);
status = DAQmxSetSampClkRate(m_ReadTrimTask, 1000.0);
status = DAQmxSetSampClkActiveEdge(m_ReadTrimTask, DAQmx_Val_Falling);
status = DAQmxSetSampClkSrc(m_ReadTrimTask, " Dev1/port2/line6");
// Read data
int32 sampsPerChanRead, numBytesPerSamp;
status = DAQmxReadDigitalLines(m_ReadTrimTask, 10, 10.0, DAQmx_Val_GroupByChannel, result, 10, &sampsPerChanRead, &numBytesPerSamp ,NULL);

Hello Magnus,
Thank you for contacting National Instruments.
"Question1: Not all functions listed in the NI-DAQmx C Reference Help seems to be supported by my NI-card, where can I find information about which of the functions that are supported?"
The best place to look for this information would be the M Series Help Manual. There you can find the features of your PCI-6259 and what operations it supports.
"Question2: I want to read data from a device that clock out data on the falling edge of a clock signal. The clock signal and the data signal are routed to two DIO terminals on the NI-card. The question is if it is possible to read data using the clock as a sample clock? See two code examples below that doesn’t work. In both cases 10 samples are read at once, even if the external clock is not present."
Look at the "ContReadDigChan-ExtClk_Fn.c" example project which ships with the NI-DAQ driver. This is located at: C:\Program Files\National Instruments\NI-DAQ\Examples\DAQmx ANSI C\Digital\Read Values\Cont Read Dig Chan-Ext Clk.
You will have to make some minor modifications to convert this to a finite acquisition, but that is simply a matter of changing the "sampleMode" parameter of the DAQmxCfgSampClkTiming() function. You will also have to route your clock signal to a PFI line and specify which line in your code.
I hope this helps.
Sean C.
Applications Engineering
National Instruments

Is it possible to read archive files outside of SAP?

Hi Experts,
I would like to read SAP archived data (*.ARCHIVE.ARCHIVING) with non-SAP application. I already know, that data is automatically compressed (and maybe encrypted?).
My question: Is there some possibility to read archive files outside of SAP? I suppose that would be needed to do some decompress first.
Your help is appreciated. Thank you!
Jan

Hi Stefan,
Thanks for your reply. I found some points with your hint. Some summary for others:
460620 - Migrating archive files:
"Archived data may have to be migrated. One solution is to perform an SLO service archive migration. You can also perform an archive migration for archive files using the Archive Development Kit (ADK)."
153433 - Access to archived data from other logical systems
"For data security reasons, the ADK checks whether an archive file was created in the same system and client where it is to be read. If the client, system or file key do no longer correspond to the meta data that were valid at the time of archiving, you can no longer always access the archive file, particularly for reloading. If only the system ID changes when a new installation due to a system copy is carried out, read accesses are still possible. No solution is provided in the standard system. The access to archive files from other logical systems must be taken into account and carried out in a migration project."
Unfortunately, I still do not know if it is possible to read archived data outside of SAP.
Best Regards,
Jan

Is it possible to read the file using File Adapter which is in client machi

Is it possible to read the file using file Adapter which is in client machine(on the same network).Then what is thee need of FTP Adapter?

You can achieve that by exposing your client machine as a drive, then you can go using file adapter.
FTP adapter will help you to communicate with different machine which is in different network.
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
Thanks,
Vijay

1.is it possible to read a .xls file and load it into an oracle table

1.is it possible to read a .xls file and load it into an oracle table, using oracle database or oracle forms i.e. either utl_file, or text_io, or any other oracle tool.
As far as I know we need a csv file or a txt ( tab delimited) file ?
2.Are there any windows tools for the same

Hi,
If you want to use the DDE package to read the XLS file then yes, you will neeed to know the number of rows and columns in the input file.
i.e. How will you know :
1) How many columns are there in the input file.
If I have a XLS file with the following data :
R1C1 R1C2 R1C3 R1C4 R1C5 R1C6 R1C7
xxx xx x
Where R represents row and C represents column, then how will you know the each row has 7 columns. If you know the answer upfront, then it's not a issue.
Using the DDE apprach, you will have to specify the RowNum and the ColumnNo of each idividual cells to read/write data from xls sheet.
Look at the syntax in my ealier post.
using the other approch (i.e. comma delimited text file - CSV file) , you need not know the number of columns as you can loop thru the input record till the last column is read.
All you have to do is to look for the 'n' occurances of the field delimiter say ',', do a substr from the current position to the point where the ',' was found.
This process is to be repeated in a loop till all columns are read.
The TEXT_IO package can trap for EOF (End Of File).
Hope I made myself clear.
-- Shailender Mehta --

Is it possible to read the description of videos that you can see in iTunes on your iPod Touch 4th Gen or 5th Gen?

I was wondering if it's at all possible to read the description of videos that you have on your iPod Touch 4th or 5th Generation. It's available on iTunes, but I was wondering if there was a way to see it on your actual device.
Any answer would be a great help! Thanks

You can omit the title altogether in the URL (together with the succeeding slash, of course). For example, my own podcast URL in the Store is
https://itunes.apple.com/gb/podcast/the-sound-of-78s/id166389425?mt=2
but this works perfectly well:
https://itunes.apple.com/podcast/id166389425
Indeed you can even put your own title:
https://itunes.apple.com/podcast/any_old_title/id166389425
So it's as simple as that!

Is it possible to read a corrupted or incomplete dmp file?

Similar Messages

Maybe you are looking for