Is it possible to read Idocs from SAP R/3 System?

Is it possible to read Idocs from SAP R/3 System? Instead of the aRFC

Unless Hydra emulates ECC sending IDOCS, then you just might want to use the WSMessageListener (http://help.sap.com/saphelp_xmii120/helpdata/en/45/6a86ac88130dece10000000a11466f/frameset.htm) and configure your message processing rules accordingly.

Similar Messages

Post Idoc from SAP to Thirdparty using XI

Dear Friends,
My requirement is sending the Idoc from SAP to Thirdparty system,but Thirdparty system also receive the Idoc format only.
so IDoc to Idoc scenario but SAP to Thirdparty system it is possible or not.
please tell me how ?
Regards,
Shalini Shah

You can use SAP Business Connector(BC) to convert IDOC to IDOC-XML at the third party legacy system.
With Business Connector see the below links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://www.erpgenie.com/mysap/bus_connector.htm
WAS - Business Connector
business connector documentation
SAP Business Connector
Business connector
Will Business Connector 4.6 be affected by new Daylight savings changes
Business connector
More info on XI can be found at https://service.sap.com/xi
and webAS on http://help.sap.com/saphelp_nw04/helpdata/en/f3/e20f3adfd0a706e10000000a114084/frameset.htm
Check this also-
http://help.sap.com/saphelp_nw2004s/helpdata/en/6f/1bd5c2a85b11d6b28500508b5d5211/frameset.htm

Problem when pushing IDOC from SAP to XI

Hi,
I am trying to push an IDOC from SAP R/3 system to XI. When I processed the IDOC using test tool(WE19), it's showing message that IDOC sent succesfully to R/3 or External system. But in SM58 Transaction it gave error message that in Trabsaction IDX1: some RFC connection error. Then I opened the Transaction IDX1 on XI server, in that IDOC Adapter configuration I gave RFC destination, Logical system name of R/3 and saved it. Now When I tried again to push IDOC from R/3 to it's not giving any error message(in SM58), but I am not able to see any thing in SXMB_MONI. Can anybody guess what's happening? And also I am using fresh newly installed XI server. DO I need to configure something else? All RFC connections are well defined and working fine.

Hi,
It is not required to create Sender Agreement for the Idoc to XI scenario. Because it is implicitly exists.
Can u check Receiver Determination created in the XI once again. And also check for RFC destinations created in the R/3.
Hope it helps ..
-Moorthy

Limit send of IDoc from SAP-ERP to SAP-XI or a Non-SAP

Hi guys,
I send the following IDocs from SAP-ERP over SAP-XI to Non-SAP for an initialload: Artmas, Bommat, Infrec, Cond_a, Mmaddi, Cremas
Example: Artmas with TA: BD10.
Problem: SAP-ERP send all 25'000 IDoc to SAP-XI. The effect is that the qRFC and tRFC in SAP-XI is full, because the Non-SAP is not fast enough to takeover the Idocs. From then other systems can't send out or get in Idocs.
I tried to limit in WE20, but it didnt work. TA: RSEOUT00 ist not so useful, because of the quantity of the IDocs.
Is in SAP-ERP a possibility to limit the sending of IDocs to SAP-XI or Non-SAP?
Example: Automatic sending of 200 Idocs every 2 Minute.
Thanks

may be u can write a wrapper above BD10 this way
report zaRs message-id b1.
select-options: matsel for marav-matnr matchcode object mat1.
parameters: receiver like tbdlst-logsys no-display.
start-of-selection.
select * from mara into i_mara where matnr in matsel.
refresh : matsel.
v_no = 0.
loop at i_mara.
    move i_mara-matnr to matsel-low
* fill up sign option etc.
    append matsel
do.
   move mara
   if v_no = 200.
    submit rbdsemat " Program behind BD10
          with logsys eq receiver
          with matsel in matsel
          with mestypat eq 'ARTMAS'
          and return.
          wait 20 seconds
    exit.
    clear v_no.
   endif.
enddo.
a®

Unable to import idoc into PI 7.0 system from SAP r/3 system

Hi Experts,
    I am getting an error while importing an Idoc structure from SAP r/3 system. The error says "unable to read Idoc segments". The Idoc has recently undergone changes. When We are looking at the struture of idoc through IDOCSYN table it is showing updated structure in SAP R/3 system but import to SAP XI is failing.
Can you suggest some way to tackle this kind of problem.
regards
Anupam

Hi Francis,
   This was indeed an authorization issue. Thank you so much for your valuable suggestion. The user lacked proper authorization to import the idocs.
Hi All,
    Thank you for all your support.
Regards
Anupam

Help Required -- Can we use SQL Query to READ data from SAP MDM Tables

Hi All,
Please help.........
Can we use SQL Query to READ(No Creation/Updation/Deletion just Read) Data from SAP MDM tables directly, without using MDM Syndicator.
Or direct SQL access to SAP MDM tables is not possible. Only through MDM Syndicator can we export data.
Thanks in Advance
Regards

All the tables you create in Repository comes under A2i_CM_Tables in Database named as your repository name. So the tables names are fields of table A2i_CM_Tables. Now i tried it but cant make it.
Now, I dont think its possible to extract all fields in tables and there values using select query. May be pure sql guy can do that or not.
But there is no relation of data extraction and syndicator. Data is viewed in Data Manager. and you can also store data in a file from DM also.
BR,
Alok

How to Trigger an IDOC from SAP R/3 to two XI systems

Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELCERY01 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once.
Regards
Ram.

Hi Ravi,
Thank you very much for your answer.
As I am not completely aware of R/3 side,I am getting little problem in understanding your answer.
Could you please explain the same in some what beter way.. Thank you ..

Message SR 053 when i send idoc from SAp R/3 4.6C to PI 7

Hi,
I try to send idoc from SAP r/3 4.6C to PI 7. I had made ALE configuration in my sender system ( SAP 4.6C) but idocs are not sent to PI. In SM58 i have message "Name or password is incorrect (repeat logon)". Yet i'm sure that user and password are correct because if i test RFC destination using SM59 , test is OK.
Is somebody can help me ?

Hi,
In R/3 :
my RFC destination is type 3 and point to XI. The port in the partner profile point to this RFC destination. ( all seems good !).
In Xi : i created a port and i load manually idoc in idx2 to be sure that RFC destination was OK. Nothing in IDX5.
When i send idoc MATMAS using BD10 from R3 to Xi i have something very strange: first the message B1 038 "1 master IDocs set up for message type MATMAS" and just after
the XI logon screen appears !! Then message "1 communication IDoc(s) generated for message type MATMAS" and this idoc stay in SM58 with message "Name or password is incorrect (repeat logon)".
Somebody can give me requires caracteristics for XI user used in R/3 RFC destination ?

Send IDOC from SAP system to IX but can't see any message in SXI_MONITOR

Hi all,
I have built up an XI system and configured an IDOC to IDOC scenario between two SAP Systems. After completed all configuration necessary:
1. Configuration on Source Side (SAP System that send IDOC) and on Target Side (SAP System that receive IDOC) is OK.
2. SLD is OK: Technical System and Business System are correct for these two SAP System.
3. Integration Repository: all designed Object is OK.
4. Integration Directory: all configuration is OK. "Test Configuration" Function is OK.
5. Runtime WorkBench: is OK. "Test Message" Function of "Integration Server" is OK.
In general, it is all OK.
But when i send an IDOC from SAP System Sour Side (Outbound IDOC from Source Side is OK), on the XI server i can't see any message in Tcode SXI_MONITOR. In this case, my XI server didn't receive any IDOC Message from this Source Side, and so that my XI server can't process and exchange any IDOC sent from Source Side.
Anyone can please help me to explain this problem: why my XI server can't receive any IDOC message from SAP System Source Side when all configuration is OK? Do anyone see the same case as this case?
Thanks a lot for all in advance,
Best regards,
Vinh vo

Hi,
Possible checks
At R/3 side
1) Check in SMQ1 and SM58
At XI Side
1) Check in SMQ2 and IDX5
Check this
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
Regards
Seshagiri

Re-triggering Idocs from SAP Communication layer

Hi,
Our webmethods middleware went down for 4 hours. We are trying to see if there is a quick way to retrigger Idocs from SAP for around 3000 doc (various doc, PO, SO, Delivery, Shipment etc). Trying to see if we can change the status in SAP and retrigger (without writing a program). Is there a way to do it. Any pointers would be useful.
Thanks,
Anand

There is no quick way to resend IDocs that have already passed. I worked at a client in the past that had written a custom program to change the status of an IDoc. The report program had a similar selection screen to WE05, but current status and new status as parameters. The program would retrieve IDocs based on the selection criteria and update EDIDC-STATUS to '30'. You can then resend the IDocs using RSEOUT00.
You do not need to modify EDIDS.

Sales Order iDoc from SAP SCM 7.0

Hi Experts
I have two question fro you guys.
1. Can we generate VMI sales order idoc from SAP SCM 7.0? I know is can generate xml message. If we can generate idoc for VMI sales order from SAP SCM , please give me some direction or path to explore.
2. Can I use idoc to to create to VMI sales order in ECC skiping CIF. But the changes in ECC to these order should use the CIF to update the VMI orders in SAP SCM.
Please share your experience on this.

Hi,
Did you set up this scenario? I want something similar, but I want an ERP order to be created. Do you know if that is possible? Do you have som tips?
regards Camilla

Read data from SAP R/3 Class-System

Hello,
first of all sorry when I posted this into the wrong subforum, but I wasn't sure about that. My Question is how to read data from the Classystem I have specified in my ABAP report.
The goal is to read data from my individual class-system as well as data from MM and write them to a table that is to be read by another report. But right now I can't find information about the class system and abap. Maybe you know some tutorials or blogs about right that topic you can suggest?

What class system have you specified in your report?
Normally a class can be used by declaring a variable of type of the class in question, if this class can be instantiated this is. If your class can't be instantiated, but it has only class methods, you can call this method directly.
But there is a lot more to this ABAP Object Oriented Programming, than just this short explanation. Search on SDN for some ABAP OO Tutorials.
some links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/c3/225b5654f411d194a60000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b6cae890-0201-0010-ef8b-f970a9c41d47
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1591ec90-0201-0010-3ba8-cdcd500b17cf
Transacation ABAPDOCU.

How to Trigger an IDOC from SAP R/3 to two systems at a time

Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELVRY03 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once. We need to write a logic to route the same to two different systems
Can any one tell me how can we do that ?
Regards
Ram.

Hello Ram,
Do you have connectivity between your production & XIQ?
What does "connectivity" mean?
1. RFC destination is maintained.
2. Port defined for the RFC destination.
If no, create these. (Search in SDN for details).
If yes, proceed:
1. Define the logical system for XIQ.(BD54)
2. Define the same as your partner profile. (WE20). Add the message type SYNCH with the port for XIQ.(This is imp)
3. Create a distribution model view with sender as "your production" & receiver as XIQ.
3.1. Add the messages which you want to distribute.
3.2 Generate Partner profiles.
No coding is reqd. for this.
BR,
Suhas

Possible to read data from a web browser into java?

Is it possible to read data from a web browser such as IE or Mozilla into a java applet for use and manipulation? If it is, could someone please post some documentation I could look at or a snip-it of code I could use? Thanks.

This will read the content from a site:
import java.net.*;
import java.io.*;
class Test {
     public static void main(String[] argv) throws Exception {
          URL u = new URL("http://www.google.com");
          URLConnection uc = u.openConnection();
          BufferedReader br = new BufferedReader(new InputStreamReader(uc.getInputStream()));
          String text;
          while( (text = br.readLine()) != null ) {
               System.out.println(text);
}

Error while pushing idocs from SAP to XI

Dear All,
For doing ALE configurations for pushing IDOC's from SAP to XI, I am following the following blog posted on SDN:
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
I am able to create the model view distribution successfully but when I am clicking on EDIT --> MODEL VIEW --> DISTRIBUTE (which is one of the steps mentioned in the blog), I am getting an error tht
<b>Target system XIDEV Communication error occurred
User is locked. Please notify the person responsible</b>
please tell me what is the error ie which user is locked and how should i proceed now.
Waiting for your reply.
Warm regards,
N.Jain

hi krishnamoorthy,
i hve created one RFC in my R/3 system which is pointing to Xi-DEV. So, in the RFC I have used my XI user id & password for loging and the RFC is wrking fine when I am testing tht. I have used my id "XISUPER" in that RFC and it is not locked in XI-DEV. I have not used user id "XI_APPLUSER" anywhere.
Please suggest.
Warm Regards,
N.Jain

Is it possible to read Idocs from SAP R/3 System?

Similar Messages

Maybe you are looking for