Is it possible to realize two different processes in the same time with TDMS?

Hello all,
we have one TDMS but a lot of workstreams. Is it possible that 2 different workstreams in the same time realize anonymization in TDMS?
Thanks in advance!!!
Ilkin Mammadov

Hello Anita,
I am sorry.I mean we have a lot of projects (for example Procurement, Finance, Logistics, etc) and each of them wants to anonymize. But it is existing just one TDMS. Can these projects start with anonymization in the same time or they have to wait till one of projects finished anonymization?
Thanks in advance!
Best regards,
Ilkin

Similar Messages

Is it possible to order two different cards at the same time? I do not want to pay shipping costs twice.

Hi, here's my problem. I made two different Christmas cards that I want to hand over in person. When I order one however, I can not select the other one, despite the fact that I want them both delivered to the same adress. Is there a way to order both as a bundle?
Thanks a lot
Best, Stefan

Afraid not.

Control two different parameters at the same time

Two motors were connected each other rigidly. One motor controlled torque and the other motor controlled speed. I generated some torque and speed data which represented one cycle of motion from a motor simulation. I like to send these two different data sets (torque and speed) to two different motors at the same time. Torque data sends to one motor and speed data sends to the other motor to see the response of the load profile. In order to do this, I thought about using multithread, but I am not sure it will work for this application. Usually multithreading delay the CPU time so the overall control process might be delayed, right? If you have better idea, please let me know.

If you are using one motion controller to control both motors, you will probably run into problems if you try to use multithreading on the PC. However, you can execute up to 10 programs (threads) at a time, in addition to host communication, using on-board programming. For more information on on-board programming please refer to the following tutorial: Developer Zone Tutorial: On-board Programming in FlexMotion
Best wishes!
Dawna P.
Applications Engineer
National Instruments

Collecting data from advantech-usb4704 with two different apps at the same time

I wonder if I can access to Advantech-4704 with two different applications at the same time?
I use this block in my vis.
I have enough ports, but inputs are needed in completely different applications. Do I have to close one of them or can they run simultaneously?
Thankyou!

Dear gtu,
as nathand said, usually it is not supported to access the same physical resource simultaneously from multiple programs. In case of DAQmx for instance, you will get an error message which says that the resource is already reserved. I suppose the same would happen with your driver, however it might be worth a try.
One workaround could be however if you revise your applications and merge the codes if it is possible so that no concurent resource allocation takes place.
Best Regards,
Adam Cseh
Applications/Systems Engineer
National Instruments

HT204380 Can you FaceTime two different people at the same time?

Can you FaceTime two different people at the same time?

No, not at this time. Feedback to Apple goes HERE, and click on the appropriate section.

How to compare two different characteristics at the same time in polestar

Hi Gurus,
I would like to analyse the e fashion universe in polestar with comparison of previous year product line with current year product line at the same time.
is there any way to do that we can compare two years of the product line sales revenue at the same time with comparison chart like 2003 T shirts vs 2002 T shirts
in polestar we can compare the two measures at the same time but i want to compare the sales revenue of product lines of two years in a comparison chart at the same time.
Regards and thanks
Abid Paul

Hi Stratos,
I am actually able to compare the Measures but i want the comparison between the two different characteristics like this year productline vs last year productline at the same time with say one measure like sales revenue or any other.
Is it possible to compare the both and it should represent in the chart as well at the same time.
In the polestar i can compare three measures at the same time but i want to compare characteristics like year 2009 productline VS 2008 productline with one measure say sales revenue.
I would really appreciate if you could help me out.
Regards and thanks
Abid

How can I log into two differant accounts at the same time in two windows without the second window affecting the first.

I'm trying to log into two facebook accounts at the same time in differant windows. When ever I log into the second account in the second window it changes the login in the first window. When I hit home or any other link the first window account has been logged out and logged into the second window account. I tried installing a second copy of firefox in a differant folder that the first but it seems to use all the files of the first installation. If I can get 2 toatally seperated instalations that don't rely on the same history, cookies, cache, etc I belive that will solve my problem. Please help.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

Nah, that won't work. Facebook has a feature that gets your IP Address, so as soon as you sign into one on the same computer, it changes the other login for safety purposes (say, someone was on a public library PC. They forgot to log out. Someone else logs in, and it automatically logs them out). You'll need 2 computers to do that.

Can I access two different libraries on the same computer with the remote app?

I am in the process of upgrading our home network. There is going to be an airport express in each of the main rooms of our house all running to a switch connected to our AirPort Extreme. The reason for this is so we can stream our music in any or all of the rooms we choose. I'm going to have a Windows 7 PC running iTunes constantly also connected so that we will have access to the entire library on any of our devices. My entire library will be housed on an external hard drive that will be connected to the Extreme. Here is where it gets tricky. My wife has a separate library that we want to have access to as well. It is going to be housed on a separate external hard drive connected to the Extreme via a USB hub. I don't want to combine our libraries because hers is absolute chaos and mine is very well organized. Without having to have a second computer running iTunes constantly, is there a way we can access both libraries simultaneously with the remote app? Either by running two instances of iTunes on one computer or some other way I'm not realizing. As it works right now, if we're both running iTunes on our laptops, then I can go onto my iPad and see both full libraries on the remote app. I want to do that, but with just one computer.

I doubt it is possible to run two instances of iTunes on the computer at the same time. To do so would require two users to be signed in and running iTunes under each user.
The better solution would be to either clean up and merge the two libraries or have iTunes running on a second computer.

HT2688 How to play same song of two different computers at the same time

Hi I have turned on Home Sharing. So one computer can play music on another. Is there any way to have one computer play what the other computer is playing at the same time. Other than just starting the same song as close in time as possible on each computer.

create an album of all of the photos you want to order, open the album, select all and order - be sure teh photos are cropped to the print size so unexpected cropping does not occur during the printing process
LN

How can I maintain two tables content at the same time with SM30

Hi all,
I created two customizing tables that I would like to link together for maintenance in SM30. Table 1 is the header and table 2 can have multiple detail records.
They are linked via the ID key field. I would like to run the Table Maintenance Generator on the first table in SE11 and be able to maintain both table data at the same time in SM30.
How can I do that without any ABAP programming? Should I use Append or Include structure or else?
Thank you for giving as much detail as possible.
Regards,
Sylvain

Hi,
You cant do it w/t abap programing.
You can code in "EVENT" to achive the same.
Open table maintainance generator of first table through se56 or se11.
follow the path: environment>Modification>Event.
Select sutaible event from drop down like Before Save... and do coding.
In this way data will be saved in second table automatically when you save in first table.
In case of any query, please revert.
regards,
Dhan

Selecting two different Names using the same table with same field

Hello,
I am trying to display several fields from different tables. Here are some of the fields that I need: The instructor needs to go after the social.
WESL | ENGR-1101-SW1 | Hinojosa | Ashley | Social | Instructor |
I am using a table where they have the social and I need to get both the student and the instructor. How do I select the instructor when the instructor's id is on a different table. example
CLASS PERSON CLASS_ASSIGN
student_id student_id: name facutly_id
Here is the code that I have so far and it works.
rem ----------------
rem Filename: cer.sql
rem Purpose: to get data from banner and put into flat file
rem Date: August 17, 2006 4:51 P.M.
rem Author: Robert Hernandez
rem ---------------
rem Notes: Need to add the Instructor - having problems
rem using the same spriden_id.
rem Also need to have admissions enter the grad date for
rem several students: Procedure is working as is.
declare
l_output utl_file.file_type;
grad_month varchar2(2);
buffer varchar2(1000);
cursor cursor1 is
select ssrmeet_bldg_code,
ssbsect_subj_code,
ssbsect_crse_numb,
ssbsect_seq_numb,
spriden_last_name,
spriden_first_name,
spriden_id,
scbcrse_title,
ssbsect_term_code,
sfrstcr_grde_code,
sorhsch_graduation_date,
decode(substr(sorhsch_graduation_date,4,3),'JAN','01',
'FEB','02',
'MAR','03',
'APR','04',
'MAY','05',
'JUN','06',
'JUL','07',
'AUG','08',
'SEP','09',
'OCT','10',
'NOV','11',
'DEC','12') as grad_month,
sorhsch_sbgi_code
from ssbsect,ssrmeet,sfrstcr,spriden,scbcrse,sorhsch
where rownum < 200
and ssbsect_seq_numb like 'S%'
and (ssrmeet_term_code = ssbsect_term_code
and ssrmeet_crn = ssbsect_crn)
and (ssbsect_crn = sfrstcr_crn
and sfrstcr_pidm = spriden_pidm
and length(spriden_id) = 9
and substr(spriden_id,1,1) <> 'A')
and (ssbsect_crse_numb = scbcrse_crse_numb
and ssbsect_subj_code = scbcrse_subj_code)
and spriden_pidm = sorhsch_pidm
and sorhsch_graduation_date is null
order by ssbsect_crse_numb;
begin
l_output := utl_file.fopen('CER','rbfpce.txt','W');
for cur1_rec in cursor1 loop
buffer:= cur1_rec.ssrmeet_bldg_code||'|'||
cur1_rec.ssbsect_subj_code||'-'||
cur1_rec.ssbsect_crse_numb||'-'||
cur1_rec.ssbsect_seq_numb||'|'||
cur1_rec.spriden_last_name||'|'||
cur1_rec.spriden_first_name||'|'||
substr(cur1_rec.spriden_id,1,3)||'-'||
substr(cur1_rec.spriden_id,4,2)||'-'||
substr(cur1_rec.spriden_id,6,4)||'|'||
cur1_rec.scbcrse_title||'|'||
cur1_rec.ssbsect_term_code||'|'||
cur1_rec.sfrstcr_grde_code||'|'||
'20'||SUBSTR(cur1_rec.sorhsch_graduation_date,8,2)||
cur1_rec.grad_month||'|'||
cur1_rec.sorhsch_sbgi_code;
utl_file.put_line(l_output,buffer,false);
end loop;
utl_file.fclose(l_output);
exception
when no_data_found then
utl_file.fclose(l_output);
end;
/

Can you be more precise , please :
- which table stores the people identities ? (I call this one Identity)
- which table gives the class where the student works in (I cal l this one Claa_attendees)
- which table gives the instructor of a class (I call this one Class)
If your issue is that you have one table which stores Itendities , and you need to display Student identity and Instructor Identity, you have to call this table twice in your query , using table aliases . I mean :
Select Stud_iden.name, Instr_iden.name
From Identity Stud_iden, Identity Instr_iden, Class_attendees, Class
Where Class.clas_id = class_attendees.class_id
and class.instructor_id = Instr_iden.people_id
and class_attendees.student_id = Stud_iden.people_id
Is this what you need to do ?

Two objects created at the same time with the same hashcode

We have this object with the following constructor:
2010-06-24 00:10:31,260 [LoadBalancerClientSubscriber(3)(pid:24312)] INFO com.intel.swiss.sws.netstar.application.caching.framework.data
set.synchronizer.DatasetSynchronizer - Initializing dataset synchronizer for: [/nfs/iil/iec/sws/work/damar/ds_cama/tmp/ds_126631277304794
/d81], i am com.intel.swiss.sws.netstar.application.caching.framework.dataset.synchronizer.DatasetSynchronizer@2ed3cae0
2010-06-24 00:10:31,260 [LoadBalancerClientSubscriber(5)(pid:24315)] INFO com.intel.swiss.sws.netstar.application.caching.framework.data
set.synchronizer.DatasetSynchronizer - Initializing dataset synchronizer for: [/nfs/iil/iec/sws/work/damar/ds_cama/tmp/ds_126631277304794
/d31], i am com.intel.swiss.sws.netstar.application.caching.framework.dataset.synchronizer.DatasetSynchronizer@2ed3cae0Note that two objects are created by different threads with exactly the same hash code. Any idea if/how this is possible?

isocdev_mb wrote:
The last part definitely suggests already that relying on uniqueness is incorrect. Hash codes are very often equal on distinct objects, viz. new String("java").hashCode == new String("java").hashCode(). Use a class level counter as suggested earlier.For that case we would of course expect the hashCodes to be equal, since the objects are equal. But even in the case of non-equal objects that don't override hashCode, you can still get the same value. Or, for that matter, non-equal objects that do override it. There are 2^32 possible hashCode values. There are 2^64 possible Long values. That means that there are 2^32 Longs that have a hashCode of 1, 2^32 Longs that have a hashCode of 2, etc.
And for non-equal objects...
package scratch;
import java.util.Set;
import java.util.Map;
import java.util.HashMap;
public class HashCodeIsNotUnique {
public static void main(String[] args) throws Exception {
    Map<Integer, Integer> hashCodeCounts = new HashMap<Integer, Integer>();
    int numObjects = 10000;
    for (int i = 0; i < numObjects; i++) {
      Object obj = new Object();
      int hashCode = obj.hashCode();
      if (!hashCodeCounts.containsKey(hashCode)) {
        hashCodeCounts.put(hashCode, 0);
      hashCodeCounts.put(hashCode, hashCodeCounts.get(hashCode) + 1);
    for (Map.Entry<Integer, Integer> entry : hashCodeCounts.entrySet()) {
      int key = entry.getKey();
      int value = entry.getValue();
      if (value > 1) {
        System.out.println(key + " occurred " + value + " times");
9578500 occurred 2 times
14850080 occurred 2 times

Keys playing two different sounds at the same time

I keep getting one of the synths whenever I'm playing the Pop Kit, or any drumkit, with my MIDI. Basically when I hit a key, two sounds come out of it when it's only supposed to be one. I've rebooted GB and the MIDI with no success. How can I fix it?

That's weird - never heard of that phenomenon. Could it be that the second sound is coming out of your keaboard? What's your setup?

Time Division Multiplexing and Processing Different Loops at the same time

Hi, I am new in Labview so you may find my questions too silly, sorry about that
I want to design an interface to control the test&measurement devices remotely. I have two desks and there are several devices on these desks. The real problem is to use two different devices at the same time. To do this I heard that I can use time division multiplexing. But I couldn't find enough information about it in Labview. Another advice I heard was to use a matrice and hold the on/off state of the devices in this matrice.
Where should I start the design to create such a system? Do you have any advices? Thank you in advance.
My basic GUI is attached.
Attachments:
InterfaceAli.zip ‏42 KB

As Mike pointed out you cannot communicate in parallel on the GPIB bus - unless you have separate buses for each instrument - and that defeats the purpose of a bus. I am not sure about LXI.
With regard to your VI:
1. Do not use global variables to pass your data around.
2. You should use the Array data type, not the Matrix data type. The Matrix data type in LabVIEW should only be used for matrix mathematical operations (linear algebra) which cannot be easily performed on the array data type. You have many more tools in LV to work with arrays.
3. The Event structure needs to be in a parallel loop. This is basic data flow. If you do not understand this concept, get some training, either though the online tutorials or through a class.
4. Use Value Changed events and place the button terminals inside the event case for that control.
5. The parallel loops need to have a Wait or some other function which causes a delay. Otherwise, the first one to start executing could consume all available processor resources. These are called "greedy loops."
6. Use integer data types for case structure selector inputs. Floating point values are coerced to integers at the inputs. If the values resulted from calculations, unexpected rounding effects may occur, resulting in the wrong case being selected. In some cases using type defed enums may be even better. The underlying data is integer and the enum item names show up in the case selector labels, helping to document what the case does or why it was selected.
7. Remove the timeout case from the event structure since it never executes. Also avoid Use Default if Unwired on the terminal with your matrix (array) data. You never have a situation where an empty array is appropriate.
Before going any further with the program questions, you need to carefully define your requirements. How many instruments will you have? How many can be active at one time? What kinds of communication between the program and the instruments is required? This includes commands to the instrument, data returned from the instrument, error handling, and timing requirements. What will be done with the data? Display, save to file, use to automatically control another device? What safety requirements or constraints need to be met? Once you have a good requirements document, then you can begin to determine what kind of program architecture is best suited to meet the needs.
I suspect that you may be making some things much more complicated than they need to be while ignoring other important issues.
Lynn

Controller different Input in the same time in a real Scenario...(SIMULATION IN 2 TANKS CONTROLLER BY PCB BOARD)

Hi! I really need help....
I´m doing a simulation where I can controller the input and output with one external PCB, all is working properly (the communication) but my problem is, I can´t open where ever I want the different valves...I mean, I must wait until the process is finish...
The program is working with diferents process like this:
§Process 0:
Programinitialization. Tanks and pipes in zero state. Control for this state with “pump on” button.
§Process 1:
§State:
“ Pump on ” button istrue: Pump 1 isrunning, andTank 1 starts to be filled with water.
“ Pump on ” button is false: nothing happen, go to the next process
§Process 2:
This process is controlled from the “Control 1”button with is who control “Valve 1” for the discharge of water from tank 1 to tank 2.
§Process 3:
This processiscontrolledfromthe “Control 2 ”button with is who control “Valve 2” for the discharge of water from tank 1 to tank 2 if “Control 3 ” button is close or if “Control 3 ”button is open the water go out from the loop.
§Process 4:
This processgiveyoutheoptiontocome back totheprocess 1 ortotheprocess 2 dependingofthestate in process 3.
So my problem is I want run different processes in the same time, without having to wait out the current process is running....
this look like this:
and with the differents states...so I was trying to use a Statechart for try to improve the simulation....
like this:
But when I was tried to implement in labview with the statechart module i can't find the way to interconexión with this new module...
Because i need two differents regions...but i can't use the connexion between them....
Some new idea, help....all is welcome!!!
Thanks in advance.
Elena

Buenos días Alvaro,
Si, mejor en español
Si, me has entendido bien, exactamente es lo que me gustaria.
Empece por mi cuenta con labview y hay muchas cosas que se me escapan... Voy a implementar la máquina de estados a ver si asi soluciono el problema.
Muchas gracias!
Un saludo!

Is it possible to realize two different processes in the same time with TDMS?

Similar Messages

Maybe you are looking for