Is it possible to receive signals from third party WSN nodes?

For the research on advanced WSN applications it might be beneficial to have a radio gateway being able to communicate with nodes of different manufacturers. For example programmable nodes using ZigBee or the Texas Instruments SimpliciTI protocoll. Is this technically possible with a NI Gateway?
Regards,
Simo

Hi Simo,
This is not possible with the NI WSN Gateway, but there are LabVIEW drivers for several WSN vendors. You would need to include their gateway.
Kurt
Kurt
Join the LabVIEW Real-Time Developers Group

Similar Messages

Can not receive emails from third party email accounts

Recently I started working for a small business which has small business server 2011 and exchange 2010 installed. Before I started there were eight user accounts and they all have unlimited email access. I created a few users through sbs AD and also from
exchange console a week ago. Unfortunately none of them can not receive emails from third party accounts. they all can receive internal emails and also can send mails to any email accounts internally and externally.
This is a night mare for me as new users are having trouble with communicating via mails. I have tried all the methods and now thought of posting this issue on tech net. Please help me on this!!
Thanks a lot!!
Sammy

Checklist for testing inbound email problems, I am assuming outbound emails works ok.
1. Check Port 25 forwarding on all modems routers/firewalls
2. MX Record is created and pointing to the correct Public IP Address, use MXToolbox.com to verify MX Record and test SMTP flow. Also Verify your public IP has not changed, use whatsmyip.org to check you public IP
3. If using POP Connector Service, make sure POP accounts are created properly
4. If using a 3rd party spam host, make sure they forward email to correct public IP address, use step 2 to verify your public IP.

Hp laserjet 1300 not receive signals from computer

HP Laserjet 1300 seems not to receive signals from my computer. Please explain
This question was solved.
View Solution.

Are you networked or USB cabled into from the printer into the computer?
What OS are you using?
If you are on windows 7 and networked in, then you need to check and make sure the that the IP address of the printer is listed as the same in the port settings.
If you are on windows 7 and are using a USB cable, then you have to load the printer through the IN-OS driver. See the link below...
Install the driver included in the Windows 7 operating system (OS)
If you are using some other OS or driver, please let me know.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

HT201397 My "remote" can't control my Apple TV, however apple tv still received signal from "remote"

My "remote" can't control my Apple TV, however apple tv still received signal from "remote" . Before that I have to press and hold the menu button, then the "remote" icon appeared on the screen.

Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

My Ipad will not receive signal from new home Xfinity modem. I reset Pad but still doesnt work.

My Ipad will not receive signal from new home Xfinity modem. I reset Pad but still doen't get WIFI

Does it not show the presence of a wifi signal, or just not connect?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My iphone 4 does not receive signals from my carrier

my iphone 4 does not receive signals from carrier

Tap Settings App>General>Reset>Reset Network Settings. If this not help may be Carrier problem, contact them. If still problem could be faulty iPhone.

How to receive signal from Roland RD300SX in Logic Pro 8??

Hello everyone,
I have problems with setting Logic to receive any signal from my piano - Roland RD300SX.
I have installed the drivers for the piano and was hoping that Logic will simply "see" it, but unfortunately it doesn't.
I have been looking for information in the Logic manual, clicking and unclicking many options for the last few hours and nothing seems to work.
When I enable input monitoring all that happens is to receive signal from my built in microphone.
I know that the USB cable works well because when I go computer information I can see Roland being plugged in to one of my USB ports. So this must a Logic setting problem...
I will be extremely grateful for any information and help!!
Thank you in advance!!
All the best,
Natali

Sampleconstruct thank you for your answers, I finally found the solution.
The Roland was not appearing in the Audio Midi Setup and it wasn't recognized until I changed one setting in the piano itself. Despite the fact that I had a CD with the USB drivers which were set up in my computer, it finally worked when I switched the USB driver setting into the "Generic" one (which means that it doesn't use the drivers from the provided CD but the ones of my OS). I don't know why it prefers the OS drivers since there is a CD provided especially for that reason, but the most important is that everything works now!:)

Incoming invoice from third party system

Hi All,
Could you please help in choosing functional module or bapi or badi's for incoming invoices that are receiving from third party system. I have no ideal about that but the SAP has to be loaded using idocs. what is the reason to choose the above ones
Thanks in advance for response.

Why not starting with docu?
The general process is explained well in help.sap.com
As a service, put this into your Google: vendor invoice edi site:help.sap.com

How to receive receipt in third-party system?

I want to send message from third-party system via HTTP-adapter and
integration server to SAP MDM. I have created outbound interface for my
third-party system, message for this system, message mapping between my
messageand ABABusinessPartner, scenario for transporting business
partner data between message interface of third-party system and MDM
interface ABABusinessPartnerIn.
On third-party system side I have developed function which sends XML-
message via HTTP protocol to SAP XI integration server (to HTTP-
adapter). I want to receive delivery acknowledgement in synchronous
mode (in same HTTP session). I want have delivery result
(delivered/undelivered) in my third-party system.
Because ABABusinessPartnerIn is a asynchronous interface then I can't
use HTTP synchronous mode (parameter &qos=BE).
Whether I should use the sync/async gateway?
Message was edited by: Eugeny Balakhonov

You can see the stocks with mvement type 101-O for that material

Item master synchronisation from third party system to SAP

Hello ,
I would like to understand how we can desgin flow of data in case of changes in Catalog from third party system to SAP.
We have implemented Catalog functionality. Catalog maintained in third party system is accessed from SAP for procurement through catalog button.
Now we want to update SAP contracts when ever there is change in prices in third party system. In this we are also validating currency,UOM, delivery time etc.
How does we can make this synchronisation? What are the possible solution for this?
You valuable inputs will be highly appreciable.
Regards,
Prashant

Hi Neetu
you have to mainatin Item text and not for material PO text...
Do these settings:
SPRO->MM->Purchasing->PO->Texts for POs--->Define copying rule for item texts..
then check you should have a entry for "Item Text" if not then
Put a Consec no. and against it enter item text. then for this you have to maintain text linkage where u should have source object as Purchase requisition.
please confirm if these settings are already there?
regrds
yogesh

DMS document migration from Third Party DMS server(Omnidocs)

HI guys,
I would like to migrate document from Third party DMS server to sap DMS server.
What is the apporach.
1. The thir party dms server is protected with login name and password.
How i can extract data from the software.
Please spread your thoughts on this.
what is the function module to download the contents of the server. by passing the url.
with regards
Giri

use ALE scenario to send the documents

Sender RFC from Third Party System

I have a vendor who is actually communicating through RFC from third party Application to SAP R/3. Now we are trying have XI in between. Where as with minimal impact on both sides.
Solution.
1. Have the RFC made as ZRFC in XI. Let the vendor call the RFC in XI ABAP and internally make an RFC call through XI Interface to R/3 as Sync Interface. Because we need to report the information back to the system where the request initiated.
2. Have RFC INI file copied as SAP Suggests under one of the folders. Develop the regular RFC to RFC Interface via XI.
Is there any other alternatives other than the above mentioned solutions? Or out of those 2, which one will provide the best performance
Appreciate any feedback. Please advice

That's exactly what we are trying to achieve here. By Eliminating direct connection R/3, we are placing XI in between. But with the budget/timeline constraints from the Partner side, we are trying to have minimal change on the partner side. They might not change something to web service etc...
Here is the text about INI file
You can configure the non-SAP RFC client to connect to the sender communication channel in the following ways:
■ By defining the parameters PROGID, gateway-host, and gateway-service within the saprfc.ini-file using RFC-SDK.
■ By using appropriate parameters in the function RfcOpenEx.
If you use the saprfc.ini-file, the respective RFC destination has to be of type R.
All the parameter values used within the saprfc.ini-file or with the function RfcOpenEx should match the entries maintained within the corresponding sender communication channel.
Example for the saprfc.ini-file is as follows:
DEST=RFCCLIENTEXT
TYPE=R
PROGID=P106646.HKExternalClient
GWHOST=pwdf2153
GWSERV=sapgw40
Please check the following link, for the same text on RFC Sender
[Help.SAP|http://help.sap.com/saphelp_nw04/helpdata/en/67/6d0540ba5ee569e10000000a155106/content.htm]
Using the same Sender RFC for non-SAP System, please share any ideas

Help me! How to use it as a web service from third party application?

After using JDeveloper to develop BSSV object e.g. JP550010, how to use it as a web service from third party application?
TKS！

Obviously the OP is working on a project for the Bead Society of Southeastern Virginia http://www.bssv.org. Oh, wait, maybe he's researching the Blueberry Shoestring Plant Virus http://abbreviations.yourdictionary.com/bssv
:D
John

I bought a macbook air and iMac from third party with preinstalled ilife and iworks

I bought a macbook air and iMac from third party with preinstalled ilife and iworks, can I update to the latest ilife and iworks without being charged even though i did not purchase ilife and iworks on my preowned Macs. I have no CD's or license for those products?
thanks

No, you will not be able to do that.

Optimization in SCM from Third Party Logistics-Business ProcessOutsourcing

I am compiling an exhaustive list of SCM Optimization touch points from Third Party logistics business process outsourcing point of view.
Based on your experience, could you list out,
1) Third Party Logistics business process outsourcing touch points in the entire width of SCM
2) KPI's to Measure and Optimize at each touch points.

Few KPI's
- On time Delivery
- Response time
- Quality of WOrk
- Costing
- Profit at 3PL

Is it possible to receive signals from third party WSN nodes?

Similar Messages

Maybe you are looking for