Is it possible to record a TV show onto a DVD Rewriteable, or DVD R?

You can connect almost any type of recording device to a Comcast box and play back or watch live in real time using the analog video outputs on the back of the Comcast box.
As an example if the subscriber owned a stand alone DVD recorder, connect to the DVR or cable box with composite yellow video and red / white for audio to the video input on the recorder, and match the colors to the rear panel on the DVR. Setup the recorder to record from the video input and place the DVR in play. You can choose any type of blank DVD disk that would work in that recorder.
Same if you wanted to record to a computer, you would need a capture card and proper recording software on the computer to record from that composite video cable.

Is it possible to record a TV show onto a DVD Rewriteable? I would think that DVDs are now like VHS tapes. Can we use our own DVD Recorders, or must we have the show recorded by Xfinity/Comcast? Is there a certain type of DVDs we need to use maybe, like R+ or R- , or a certain brand of DVDs that are made?

Similar Messages

Is it possible to burn a slide show onto a Blu-ray DVD ?

Using PS8 Premier I could't burn my slide show ( no movies ) with music onto a Blu-ray DVD. The problem seems to be......low memory. ( my computer has 2 Gig but my project which doesn't seem that involved has over 4 or 5 Gig ). The reason I want to burn onto Blu-ray is to get a clearer project than I was able to on a regular DVD. I get a good slide show on my cpu monitor and also on a regular DVD in the smaller screen of the burner program but the project loses resolution when going to full screen. That is why I wanna try it on Blu-ray.

If you are going to BD, then I would start with a BD Preset. This ARTICLE will tell you the supported Frame Sizes, and FPS.
I would choose the 1920 x 1080 @ 29.97 FPS Interlaced (NTSC), or 25 FPS Interlaced (PAL). I would then go to my original stills and Scale them to ~ 1920 x 1080 in PS/PSE. This ARTICLE will give you tips on doing that with automation in either image editing program. Import those Scaled Images into PrE, with the Duration that you feel is correct, depending on the "flow" of the SlideShow. Note: you can tweak that Duration for each Image, if needed, but by planning a bit, most will not need any tweaking. Then, add any Pans, or Zooms (Effect>Motion>Scale, and/or Motion>Position). Add any Transitions desired, and edit any Audio. Add the desired BD Menus and Chapter Markers (no Stop Marker at the end of the Timeline). This Project should burn to BD easily.
Good luck, and hope that it helps,
Hunt
Note: in the first linked article, you will see that 20 FPS is not supported, and neither is 1 FPS. You can, of course, make the Duration of each Image 1 Frame, but will probably want the Image on-screen for longer, say 5 - 10 secs.

Recording Cable TV Shows using Mac Mini

Hi:
does anyone know how to record cable tv shows using Mac Mini?
please discuss the hardware and software issues.
Munir

munirul wrote:
Hi:
does anyone know how to record cable tv shows using Mac Mini?
please discuss the hardware and software issues.
Munir
There are several possible ways, some depend on the type of Cable TV system you have. First I am going to assume you are an American. While Cable TV is available in other countries, for example here in the UK, it ***** so bad in the UK that you are unlikely to be using it here.
Now, with American Cable the first possible method has already been mentioned by others which is to use an analogue connection from your cable box to an Elgato EyeTV 250 (possibly discontinued). This is an analogue tuner for a Mac and will let your Mac record the signal. There is also the more expensive EyeTV 250Plus which includes a chip to do the conversion to MPEG2 and take the load off your Mac. This method will work whether your Cable box is analogue or digital.
If your Cable box uses "Clear QAM" then you could get the HDHomeRun box from Elgato. This not only will provide a direct digital signal with no loss of quality, but will also provide two tuners, and can be shared across your home network. There is also the EyeTV 500 see http://www.elgato.com/index.php?file=products_eyetv500 but this also may have been discontinued.
Finally, if your Cable box has a FireWire connection (and by law they have to give you the option of this) then you can connect the box via FireWire to your Mac and run software on your Mac. Again this will be a direct digital capture with no loss of quality. See the following two pages for information on how to do this.
http://www.ammesset.com/irecord/
http://project-tigershark.com/people/rob/blog/2007/01/14/cable-tv-mac-firewire-h d-pvr/
Note: I am in the UK and have no direct experience of any of the above, and can only gnash my teeth in frustration at how spoilt for choice US TV/Mac users are compared to the pathetic massively DRMed situation here in the UK.

Is it possible to record an image while recording a video??

Is it possible to record an image while recording a video??, i know it is possible when the camera is just showing.

Ok i 'm developing an aplication for a hospital where the doctors use the system. For example a pacient goes to take an endoscopy chekup, where the doctor introduces a little camara into the pacient body to see the problem,so the system must be showing that, with this there is no problem JMF uses a Player to do that, the doctor can see what is going on and take a snapshot(image) at the same time. The problem is that when the doctor starts to record a video and at the same time wants to take some snapshot of that video recording.
I use this line of code, but it returns null, and got this message: player doesn't support FrameGrabbingControl.
FrameGrabbingControl cg
cg = (FrameGrabbingControl) processor.getControl("javax.media.control.FrameGrabbingControl");

How to watch a live broadcast show while recording two other shows

If you have a TV with a QAM tuner built in and you use a splitter to connect the cable to the cable/antenna input of your TV while leaving a connection to the DVR, you will be able to watch a broadcast show live while recording two other shows on your DVR. I tried this and it worked, but the channels I had access to (that seemed to be ones I was interested in) were basically the broadcast channels (in my area 3.1, 6.1, 10.1, 12.1, etc.). Obviously you don't have access to the other features such as on demand, but it's handy to be able to handle three shows at the same time as long as one is on one of the channels available with the direct connection to your TV.
Of course, this also provides a way to avoid the cost of additional set top boxes as long as you don't need access to the additional channels features like on demand.
Bob S.

OR if you're tv's older and doesn't have the qam tuner, you can hook up a HD antenna for 30 dollars, and if you live in an area that gets reasonable reception, you'll get something similiar to what you describe.
both are good solutions.

I Recorded 4 audio tracks, could hear it in the headphones while recording. Meters show input. No playback sound. Advise.

I Recorded 4 audio tracks, could hear it in the headphones while recording. Meters show input. No playback sound. Please Advise.

How can anyone advise on such a cryptic post, all we can do is guess.
Which version of Logic, what audio hardware are you using?
Have you read the manual?

Is it possible to record and play at same time in swift, is there a option to record without storing the file

I am making a microphone, is it possible to record and play at same time in swift, is there a option to record without storing the file

Its pretty simple with FMS. You just need to do following things:
Publish using FMLE with following settings: (just telling which are needed , rest you configure based on your needs)
Video codec: H.264
Audio Codec: <of your choice>
Server ip: rtmp://<server-uri>/<app-name>
Stream Name: mp4:<stream-name>.f4v
Application : Server-side code
application.onPublish = function(myclient,mystream){
     mystream.record();
application.onUnpublish = function(myclient,mystream){
     mystream.record(false);
Have a client , which subscribes in following live mode:-
ns.play("mp4:<stream-name>.f4v",-1,0,true);   // this is subscribing in live mode
In this way even if file is recorded, your clients are subscribing in live mode so all will be in sync.
Now if you want to disallow any clients who will try to subscribe to "recorded" file when live event is going on, you can achieve using auth adaptor. (let me know if you want to enforce such requirement)
But i think above solution solves your primary problem. Also please let me know if there are any issues in getting it work , i have given bare minimum which is required.

Possible to record 720p at 60 fps with Touch 4G?

I realize I'm asking a lot from this little device, but I was wondering if it is even possible to record at 60 fps. I believe the specs list recording at 30 fps, but I wondered if it was possible to change this.
Many thanks in advance.
jjw

Thanks for the response. It's a handy video camera that fits in my pocket. I was hoping to use it instead of having to carry a standard sized camera around. The iPod is great for taking spontaneous video shots when I don't have a camera on me.
Thanks for the answer.
jjw

Is it possible LSMW recording method using multiple structures

Hi,
can any body tell me, is it possible LSMW recording method using multiple structures
i,e using Header details one flat file structure and Item details another flat file structures

Hi,
Check this link..
LSMW multiple structure migration

Is it possible to records another machine ip addree in audit table

Hai
I have written system event trigger,it records username, ip address and time in audit table when user logged on database , The database reside on xx machine ( 10.0.0.88 ipaddess ). Is it possible to records another machine ip addree in audit table while accessing database from another machine?
example we have another database on xxx machine (10.0.0.2 ip address),when accessing database from xxx(10.0.0.2) to xx (10.0.0.88),the xxx node ip address will be stored in audit table?.
Thanks in advance
Regards
mohan
CREATE OR REPLACE TRIGGER On_Logon
AFTER LOGON
ON database
declare
db_name VARCHAR2(50);
addr varchar2(80);
x varchar2(20);
begin
db_name := ora_database_name;
select utl_inaddr.get_host_address into x from dual;
if ( ora_sysevent ='LOGON')
then x:=utl_inaddr.get_host_address;
insert into log1
select ora_sysevent,ora_login_user,ora_database_name,utl_inaddr.get_host_address,sysdate
from dual;
end if;
end;
SQL> select * from log1;
OPERATION USERNAME DATABASE IP_ADDR TIME
LOGON MOHAN1 ISOLA6.US.ORACLE.COM 10.0.0.88 11-APR-02
Based on system events trigger how to find out which user from which machine (ip address) accesing database?
example:
CREATE OR REPLACE TRIGGER On_Logon
AFTER LOGON
ON database
declare
db_name VARCHAR2(50);
addr varchar2(80);
x varchar2(20);
begin
db_name := ora_database_name;
select utl_inaddr.get_host_address into x from dual;
if ( ora_sysevent ='LOGON')
then x:=utl_inaddr.get_host_address;
insert into log1
select ora_sysevent,ora_login_user,ora_database_name,utl_inaddr.get_host_address,sysdate
from dual;
end if;
end;
SQL> select * from log1;
OPERATION USERNAME DATABASE IP_ADDR TIME
LOGON MOHAN1 ISOLA6.US.ORACLE.COM 10.0.0.88 11-APR-02

Providing you're on 8i+ this will give you the IP address from which th eclient is connected:
SELECT sys_context('userenv', IP_ADDRESS) FROM dual;
Bear in mind that many network applications assign IP Addresses dynamically, so depending on how your network is segmented, the same machine can have very different IP addresses from day to day. If this is just an internal system you're auditing then you might find this call more useful:
SELECT sys_context('userenv', TERMINAL) FROM dual;
This returns the network's ID for the machine, and this is non-varying (unless network admin change it explicitly - but why would they?). This call is also available in the older, deprecated USERENV function:
SELECT userenv('TERMINAL') FROM dual;
rgds, APC

Is it possible to record and listen to audio on the ipad like in adobe reader 11?

I'm wondering if it is possible to record audio comments and listen back to them on the ipad or iPhone? I know this is possible using adobe reader 11 on my laptop.

It is not possible in Reader. If you want to reacord audio comments, record them in mp3 format your iPad and your computer will have no trouble playing them back.

Possible to record video in flex?

Hi,
Does anyone know if it's possible to record a webcam stream
to flv or any other format?
At this point, I have a method which takes "screenshots" of
the webcam every 200 milliseconds or something but this gives a
very slacky performance.

Don't know, if this is possible...
Could one make a subclass of NetConnection, which does not
forward incoming messages to a server but saves them locally in a
variable of your app?
Just an idea...

How i use java applet data grid i have many record i need show in grid

hi master
sir i have many record i want show all record in applet grid how i use grid in applet
please send me sample code of java class how send many record to grid and applet code how use applet grid
thanks
aamir

Duplicate post:
how use the jtable in java applete
Aamir,
If you use JApplet then you can use JTable. Just do an Internet search for "JTable" and "applet".
Good Luck,
Avi.

Is it possible to record vocals in Logic Pro 9?

I just bought Logic Pro 9 to create music, but I was wondering if it's possible to record vocals over the music. If it is possible, how do I do that?

You've made a good point Miles. A feature they have added in both US and UK versions of cars is a thing called 'pedals'. In the UK it's a little confusing as there are 3 pedals but most people only have 2 feet, but hey!
In UK the middle 'pedal' functions as a slow-downer and the far right pedal functions as a speed-uperer. There are no short cuts to these features. In the US most cars have 2 'pedals' and most people have 2 feet, way more logical. In this case you'd want to press the left with your foot to slow you down.
I have heard that your car can go up hills but you have to configure the 'engine' properly. Once configured and the 'engine' is on, a whole new range of motoring possibilities will open up to you. The speed-uperer pedal has no effect unless the 'engine' is configured and working properly. Stumped me for ages.
Hope this helps you stick with 'car' a bit longer. Although 'boat' has it's attraction, jumping to a different platform is not always the answer.

Update Record Does Not Show in Server Behaviors Pane

I am using Dreamweaver CS4 on a Windows 7 machine. I am coding in ASP VBScript. When I apply an Update Record behavior to a form and upload the file to the server, it works fine. However, the Update Record does not show in the Server Behaviors pane. Therefore, I cannot click on it to make further edits to it. When I open this same file in Dreamweaver CS3 on a Windows XP machine, I do see the Update Record behavior in the Server Behaviors pane and I can click on it to make it edits. What do I need to do to get the Update Record behavior to show?

Probably not the answer you are looking for, but support for traditional ASP has not been a focus of DW development, nor has it been for Windows 7 for
that matter. ASP is a "depreciated" language and support for it is dwindling. The I don't know exact reason for what is happening to you here, but I'd imagine it's an issue with CS4s translators and the combination of the feature sets in both Win 7 and CS4 not "worrying" about ASP as much as they used to.
Lawrence Cramer *Adobe Community Professional*
www.Cartweaver.com
Complete Shopping Cart Application for
Dreamweaver, available in PHP and CF
Stay updated - http://blog.cartweaver.com

Is it possible to record a TV show onto a DVD Rewriteable, or DVD R?

Similar Messages

Maybe you are looking for