Is it possible to record into logic...

Hello everyone, this would be my very first post asking for help.
here's our problem. We've been using logic for years, we have just recently purchased Digi HD2 accel system, with a digi 192 I/O, and Control 24.
is it possible to record into logic using this setup? if so, how do we go about setting up logic to be able to do this?
the only we have been able top get sound out of logic thru the 192 an control 24, is by using CoreAudio drivers. The ESB does not get us any sound.
anyone familiar with this setup?
thanks
jz

I guess we'd like to record using TDM within logic. Right now we get sound if we use the Coreaudio drivers, but don't know how to input using Control 24. If we could get advise on how to do it using both Coreaudio and TDM, it would help us greatly.
thanks
jz

Similar Messages

Recording into Logic - 5 sec latency!!

Hi, I've got a strange latency issue... everything I record into logic appears 5 seconds before I record it?! Can someone please help me because it's driving me super nuts.
It just did it again! Aarrrgh!
Fer?

slidersson wrote:
Hi, I've got a strange latency issue... everything I record into logic appears 5 seconds before I record it?! Can someone please help me because it's driving me super nuts.
It just did it again! Aarrrgh!
Fer?
Just take some valium to slow you down to reality.
Cheers

Recording into logic from my MPC 1000

Does any one know how to record into logic with an MPC 1000. I've got sync but cant figure out how to get a level.

well the easier way is maybe to transfer ur sample and program to logic via floppy(then u need a floppy drive).or via aksys(then u need the usb option slot on mpc.don't even know if it exist!?).or transfer what u wand digitaly via the coaxial output of the mpc to the optical in of ur mac(then u need a coax2optic converter,and i hope u own a g5 for the optical in)
seriously it's difficult to answer ur question cause there is many different way .u should give more info.
wich mac?
do u have any soundcard?
do u have any optional card output on the mpc?
is there a built in coaxial on the mpc?
did u receive a soft call A.K.S.Y.S with the mpc?
in this particular case u should have a usb port or at least an optional usb card?
etc

Recording into logic from my MPC 1000 Redux

I want to record a four bar drum beat, bass line..etc
Also, I have some existing beats that i made on my MPC before I got Logic that I would like to transfer over to logic. Any thoughts on how to record into logic from my MPC? I can't seem to get any level even though I've got sync.

well the easier way is maybe to transfer ur sample and program to logic via floppy(then u need a floppy drive).or via aksys(then u need the usb option slot on mpc.don't even know if it exist!?).or transfer what u wand digitaly via the coaxial output of the mpc to the optical in of ur mac(then u need a coax2optic converter,and i hope u own a g5 for the optical in)
seriously it's difficult to answer ur question cause there is many different way .u should give more info.
wich mac?
do u have any soundcard?
do u have any optional card output on the mpc?
is there a built in coaxial on the mpc?
did u receive a soft call A.K.S.Y.S with the mpc?
in this particular case u should have a usb port or at least an optional usb card?
etc

Recording into logic 8 with a usb mic

Hi guys
I sorry for this very noobish question but up until now I've been doing all my recording and production in GB and I finally decided to take the plunge into Logic.
How do I record voice via a usb mic that is connected to my mac?
I'm looked and looked and I just cant seem to figure it out.
Thanks very much
G

Yes aggregate device... I had a Samson C01U USB mic... I could never... no matter what I did... or tried get good recordings without long latency out of that device... After 5 minutes it would start to garble. A reset of the audio units would give me another 5 minutes... Never could get latency down... I gave up and I use regular mic into my firewire Duet now.

Help. I cannot record into Logic express 8!!!!

Sup people. I am having trouble recording in Logic 8 express. I have checked the setting of the computer and yes My audio interface (alesis multimix firewire) is set as the input and output device. I can record sound in to garage band. I can do a test and see the meters go up and down in the systems preference sound settings, but I can't record a **** thing from external audio. Can anyone who is using logic 8 help me and maybe give me somethings I haven't thought about? I'm about to pull my hair out cuz I just got logic 8 express and this program is great. Oh, and yes I set the audio in logic to software monitoring. Yes I pressed the R button to arm the track for recording. Yes I pressed the I for input monitoring. Anyways.....SOMEONE PLEASE HELP!!!

I assume you're hitting the round RECORD button in the Transport window, after arming the track, and not the arrow button? I've made THAT mistake too many times.
I'm assuming you've selected audio tracks (not MIDI), if you're recording audio -- made that mistake a few times, too.
I'm using the Alesis, too. I'll try to remember all my trial-and-error lessons and see if I come up with something else.
A few things coming to me....I did need to reinstall the Alesis drivers. On first attempt, there were several glitches, until I did the re-install. And....as mentioned earlier....powering up with the Alesis is most important....and appropriate settings in the Audio/MIDI Setup utility....and consistent settings between that utility and Logic PREFERENCES & SETTINGS: e.g. 44.1khz--44.1khz, or 48-48, etc. Sorry if this is rudimentary, but they're all mistakes I've made at one time or another.

Can't record into Logic through the built-in mike

Hi guys, just faced a strange thing in Logic 8, want to record my voice through my MacbookPro's internal mike, so in Audio preferences I've put an in-built input, in System preferences put input and output to in-built speakers and mike, but I can't move the track level meter in Logic with my voice at all, and there's no waveform, no sound is going inside, i got just an empty audio region, while in the System's preferences window the level meter moves when I'm saying sth...What can it be?Anyone faced the same?
Thank you

you need to select the build in microphone as the input in Logic Audio preferences as well.
it's the 1st on the drop down menu in Input Device Logic's Audio prefs.
And mute the output of the build in speakers or wear headphones
A
Message was edited by: immo

HELP recording with behringer xenyx 2442fx into Logic??

Hey,
So i recently got a Behringer XENYX 2442FX mixer and I am trying to record drums into Logic pro.
The mixer came with a usb interface which takes two red & white L R cables.
I am trying to record into Logic however from reading other things online I'm starting to doubt that that is possible?
If anyone could give me help asap it'd be greatly appreciated as If i need to send the mixer back and get something else that will work, i'll need to do that quickly!
thanks again

http://video.google.com/videosearch?hl=en&client=firefox-a&rls=org.mozilla:en-US :official&hs=MCM&resnum=1&q=behringeru+control+uca200manual&um=1&ie=UTF-8&sa=X&oi=videoresultgroup&resnum=4&ct=title#
If this is how it hooks up... then no.. you cant seperate the drums with it because your coming out of a feed that is the stereo track.. into the interface... theres no possible way with that set up that it could seperate the tracks out. You just need an interface with enough I/O's to feed into logic.. like a Motu... then you just need a mixing board that you can use to control logic and I think that would be ideal for recording drums.. but really if you dont mind mixing in the computer you dont even need the mixing board to record the drums if you have a sizeable interface... anyways.. thats my 2 cents.. hope that helps a lil

Recording Streaming Audio Directly into Logic 8?

Is it possible to record streaming audio directly into Logic 8. I would like to grab some sound bites from web sites and various other places and lay them down as Audio tracks in Logic 8.
I know WireTap Pro will do it for $30 but I wonder if I could just do it in Logic.
Again, thank you for your time.

Bee Jay wrote:
Or you could also use the loopback trick and just plug your interface's outputs >into it's inputs - be careful of your routing to avoid feedback though...
Hi Bee Jay .. I wonder if you would mind advising on this setup:
Normally I hear everything that comes out of the computer via the following route:
Out of computer via Firewire and into Motu828
Then out of Motu 828 and into Mixer channels 1 & 2 which are set to Monitor only. ie I hear all audio ( including streaming audio from computer) through my monitor speakers and the signal does not go back into Logic.
All the other mixer channels (3 - 16) I use for recording. Mics and line inputs routing these back into the MOTU (and then the computer) by buttons on the individual channel of the mixer. ie If the button is up on a particular mixer channel it comes out the speakers and does not record in Logic. If the button is down then that channel records into Logic (via a loom into the MOTU).
I was warned on no account to press the buttons down on channels 1 & 2 ( because those were the main outs to monitor Logic's signal ) ...
But that if I *switched off the channel output in Logic channel strip* - then I could press down those buttons on Channel 1 and 2 and route whatever audio was coming out of the computer ( iTunes, You Tube etc) back into Logic to record.
I did this some time ago and it worked ... but for some reason, now even though I have the Logic Channel outputs switched off, I still get the most horrendous howling feedback if I try to record Streaming Audio or iTunes.
If you or anyone else has advice on what would be causing this, I would be most grateful
ms

Cant record into to logic pro 9 using samson l1200 live mixer, System/Pref/Audio input tab says selected device has no input control

Hi Im new to this so bare with me..When I connect my Samson l1200 live usb mixer to my Imac 7,1 Intel duo core 3gb ram, osx10.6.8, via usb cable to record vocals/instruments, in System Pref/Audio/Output tab is set to mixer's UsbAudioCodec driver, (Im able to hear playback into headphones via the mixer, and hear the mic when spoken into it but cant record a track into Logic...System/Pref/Audio input tab says selected device has no input control, Ive set the input/output settings in Logic to UsbAudioCodec but still no good...Would it be either the way the mixer is set up? or is this mixer (Samson l1200) not compatible with my particular Imac? I hope I may be able to help as Im only a student trying to record my band thanks

I perfectly understand your problem.
First... just to make sure, in Logic's preferences /Audio make sure Universal Track Mode IS checked, it should be enabled. (I think it probably is just checking)
Second... if you record a track in a new Logic project and then go to the next track to record an overdubbed guitar part, are both parts recorded on the 2nd track?
What I'm asking is overdubbing working differently for two or three recorded tracks as opposed to overdubbing with an imported track.
What I think is happening is you have the main stereo output being recorded into Logic so if you playback an imported or recorded track from Logic while recording a 2nd track (overdub), both are going to be recorded on the 2nd track.
I took a look at the manual, here's the relevant sections.
34 – SEND – USB input send switch
The USB INPUT switch allows you to select one of
two stereo (or two channel) signal paths to feed the
USB output to send to the connected PC. When the
INPUT switch is in the up position, the USB signal will
feed from the MAIN left right mix. When the INPUT
switch is in the down position, the USB signal will
feed from the AUX 1 and AUX 2 buses which enables
you to create a unique mix to send to the PC.
35 – RETURN – USB return switch
The USB RETURN switch allows you to select one of
two stereo return paths to receive USB audio from
the connected PC. When the ASSIGN switch is in the
up position, the USB signal will return to the MAIN
mix bus. When the ASSIGN switch is in the down
position, the USB signal will return to the last pair
of stereo channels which enables you to playback a
recorded track in the MAIN mix, and you can use the
channels AUX sends to feed any of the AUX buses.
This will let you hear the USB playback tracks in the
monitor mixes.
36 – MONITOR – USB headphone enable switch
Press the USB MONITOR switch down if you want
to hear the signal from the USB return in the
headphones.

Record into the middle of an existing file without deleting

Is it possible to record into the middle of a .wav (or any format) file without audition recording right over the existing file? Is there an equivelent of using the Insert toggle in Word?

Duane_Whitcomb wrote:
Is it possible to record into the middle of a .wav (or any format) file without audition recording right over the existing file? Is there an equivelent of using the Insert toggle in Word?
Okay, well let's try answering the question you actually asked...
The answer is yes - although there's a constraint (as you've discovered...). If you pick a section in the middle of a file, and insert silence into it, you have an extra chunk of file, the length of which you can determine when you create it. Now, if you leave this section highlighted, and hit 'record' then you will be able to record only over the highlighted section.
So the constraint is that you have to define the time you want in advance. Usually that's not a problem - just pick a bit more than you'll need and trim out what you don't use afterwards.

How do i connect a pod with an apogee duet into logic

I am running a line 6 pod 2.0 and am new to logic. I was wondering if someone could walk me through connecting it to a apogee duet and record into logic thanks

I have an Ensemble and a X3 Live but I imagine it's similar. I run two lines from the pod into the Apogee device. Then set up two audio tracks, one with Input 1 and the other with Input 2. Arm the tracks to record and you should be set. (You can also do it with a single track, just using one line out.)

Turntable into Logic / make line level

i found my old turntable and records and want to record into logic. i don't have a phono pre amp. something small and not to expensive. also could my ensemble boost the signal of the turntable or do i still need a pre amp. lookin around the studio to see if i have anything else that could work. appreciate your suggestions
thanks

Hi,
i fear that at least a small cheap preamp is better that anything you could do without it. 30-50 Bucks will do and save you a lot of headache. BTW: If you are planning to buy a small analog mixer: Some of them have a built in phono preamp. I got a Soundcraft Compact 4 to record my digipiano, mic and some other things, and even that's only about 100$ and has a good phono preamp.
I also plugged my Macbook directly into my HIFI amp's CDR out, which did the job fairly well. Not elegant, but effective.
Fox

Routing Quicktime synth audio into Logic

Does anybody know how to route the Quicktime synthesizer's built in GM sound module's audio output back into Logic so it can be included in a bounce down mix ?

Sure, first open Jackrouter from your application folder or drag it into your dock.
Hit the start button. Open Logic and chose Jack router as your device. Open the application you want to route into Logic (like Quicktime/iTunes whatever) and select Jack Router as Standard Input/Output in the Audio Midi setup of your Mac. Back in Jackrouter hit the routing button - menue opens. On the left there are the send port, so in my screenshot example I have chosen Kontakt 3 standalone to be routed into Logic but it could be Quick Time/itunes whatever. I selected Jack Router as the output device in Kontakt as well, now I click on K3 in the send port section and on the right I double click on Logic as the receive ports, the Logic letters turn red to indicate that a connection was made.
If you connect the Logic send ports to the system receive ports and activate software monitoring you will hear what you record into Logic through Jack Router. So I think this little app is very useful in many situations.

Is it possible to record parts of a phone call on Skype into Logic, then play back the audio while still on the Skype call? I'm a voice teacher coaching students in other cities, and Skype is not helpful with this idea.

Is it possible to record parts of a phone call on Skype into Logic, then play back the audio while still on the Skype call? I'm a voice teacher coaching students in other cities, and Skype can't offer any suggestions.

Hi
What I'm saying is:
Make a new MONO audio track (use the + button). Assign it to input 1
Make a second new MONO track, assign it to input 2
Name both tracks, record-enable both tracks, and record.
You could, of course, make both tracks in one go via the new track dialog box, and hav ethem automatically assigned to ascending inputs.
CCT

Is it possible to record into logic...

Similar Messages

Maybe you are looking for