Is it possible to record multiple tracks simultaneousy on Soundtrack Pro v.1.1?

Sorry for posting this here, but the Soundtrack forum looked dead and I know by this point the programs have been integrated.
Anyway, I'm recording a podcast with a two-mic set up using a mixer, and I need to record each mic to a separate track. I found instructions about how to do it with version 3, but I'm on an old crap 1.1 version. Still hoping I can find a way, though.
Any help would be greatly appreciated.

Yes, the 5770 should be installed in the bottom slot, Slot 1, after removing the X1900.  Over to the top left just near the side and top of the fan cowling are two, black, rectangular power connectors.  These are use to provide power for those GPUs that are not bus powered.  The X1900 may already use both, therefore the power cables are already connected to the motherboard.  The 5770 uses one of those power cables leaving the second one free.  Thus, a second GPU would either need bus power or could be powered by the second cable.  This would preclude, for example, using an ATI 4870 because it requires both power cables.  However, you could use a second 5770 with the second installed in Slot 3 (the 5770 overlaps two slots.)  Or at least mine does.
The second card would have to be an Apple-specific card.  You cannot use PC or OEM video cards because they do not have a compatible ROM.

Similar Messages

  • I record multiple tracks (3-5) from real instruments and vocals. I want to send these files to a collaborator to add more tracks to, but Garageband wants to mix these down (which I don't want). How can I send the multiple tracks files to my friend?

    I record multiple tracks of real instruments and vocals wth Garage Band. I want to share the file with a collaborator so he can add another instrument or two. I have not found a way to do this without the process mixing down the tracks. I don't want them mixed down like when I send them to Itunes. Also I can't seem to just attach a file directly to an email for sending purposes. I thought I saw a method to do this with software instruments, but how do you do it with real instruments? I've tried every process on the "export" list to try to accomplish this, without success. Thanks for any breakthrough advice on this!

    As isteveus said - for large projects uploading to a server would be best.
    Also I can't seem to just attach a file directly to an email for sending purposes.
    But for completeness's sake , you cou can mail a project, if you ctrl-click the project and use "Compress xxx.band". This will compress the project and create a zip file, that you can mail (if it is not too large). But ask your friend for the maximal file size allowed as a mail attachment.
    But whichever method you use to share your project, be sure you include all loops and instruments, if your friend does not have the same JamPacks installed. You can bundle the loops into the project by saving it as an archive. "File > Save as" and check the "Archive Project" option.
    If this option should be disabled, you can force it to become active by editing your project slightly. It is only available, if the project needs saving.
    Regards
    Léonie

  • Trying to record multiple tracks (24) in Garageband with 3 presonus firestudio devices daisy-chained together.

    Please help !! I can record multiple tracks (8) on a single presonus firestudio, but now I'm trying to expand the number of tracks to 24 by daisy-chaining three firestudio devices.
    The three units will sync up properly, and Garageband detects all of the input channels, but the recording doesn't pick up the input signals for the 2nd or 3rd device. It only picks up the signals from the first device. I read the manual and daisy-chained the devices by serial number (lowest to highest).
    Any help would be greatly appreciated.
    Thanks

    avotrans wrote:
    I'm trying to expand the number of tracks to 24 by daisy-chaining three firestudio devices.
    you'll need to create an aggregate device:
    http://www.bulletsandbones.com/GB/GBFAQ.html#multipleaudiointerfaces
    This FAQ entry offers a Minute GarageBand video tutorial
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Can I record multiple tracks simultaneously in v. 1.1?

    Hey, I found some instructions online about how to record multiple tracks simultaneously in version 3, but I can't figure out how to do it in the old version I have, 1.1. Any help is appreciated. I'm crossing my fingers and hoping this feature wasn't implemented later. I have a two-mic setup for podcasts, and need to record both on diff. tracks.

    Multi-track recording was added in v2
    From STP 2 Manual - New Features:
    Multitrack Recording
    With Soundtrack Pro 2, you can record across multiple tracks in the Timeline. (This is limited only by your hardware setup.)
    So, not available in v1
    Have you tried Garageband?

  • How can I record multiple tracks simultaneously?

    How can I record multiple tracks simultaneously?  Or rather what hardware do I need to do this?  I currently run guitars and mic into a PA and then the PA into Garageband.  But this is just one track.  I want to record the guitar as one track while simultaneously recording vocals as another track.  What hardware do you suggest - keeping it affordable?

    if you want to use your two chanel PA, pan 1 channel to the left, and the other to the right, and set one GB track to Mono 1 and the other to mono 2.
    if you want better quality, any two channel interface will work:
    http://www.bulletsandbones.com/GB/Interfaces.html

  • Hey, is it possible to load my Tracks, made by Logic Pro 8, to Logic Pro X ??? Thanks for help

    Hey,
    is it possible to load my tracks, made by Logic pro 8, to Logic pro X.
    Thanks for your help.

    Yes, it is possible!
    Regards

  • How do I record multiple midi instruments in Logic Pro simultaneously on separate tracks?sim

    Hi. I am trying to record multiple midi instruments simultaneously into Logic Pro 9 through a MOTU USB Fas Lane so that it is similar to recording a live band.
    Essentially:
    Track 1: Midi Keyboard - Motu Fast Lane Input A - Logic Pro - Software Instrument (Absynth)
    Track 2: Midi Drum Kit - Motu Fast Lane Input B - Logic Pro - Software Instrument (Battery)
    Neither Midi device can be set to a separate channel.
    I would have thought this was a really common application (recoding from multiple live midi sources like a band would normally do) yet it seems unnecessarily complicated.
    I gather what I would have to do involves:
    1) Going into the Environment.
    2) Creating a Physical Input
    3) Creating a Sequencer Input
    4) Placing a transofrmer between the Physical Input and the Sequencer Input
    Where to go ffrom there I have not got a clue!
    Any help would be appreciated.
    Incidentally I would also like to record two audio tracks at the same time as the midi track, but hoepfully that does not complicate things further.
    Thanks,
    Luke

    I have it set to Performance mode which according to the owners manual: "This mode makes the XP-30 function as a multitimbral sound
    source, and Performance settings can be modified. If you’re
    using an external MIDI device to control the XP-30 in this
    mode, it will function as a multitimbral sound source."

  • Recording multiple tracks WITHOUT overdubbing

    I understand that for some reason the way you record multiple takes in Logic is to just record over your previous take. But consider the following scenario:
    I record a keyboard take.
    With me so far?
    Now I want to record a second take, but first I want to play some more over the other tracks without hearing the take I just recorded. I can't just mute the track because I need to hear my playing. I can't delete the track because I want to keep it. I basically just want to create a blank take two, play some more, and then record into that second take once I know what I want to play. Make sense?
    In Digital Performer or Pro Tools this is easy. As far as I can tell, in Logic it's impossible. But I just can't accept they would actually design the software this way. It's just too stupid. Can this really not be done in Logic?

    Then just press play and play the keyboard along with the first take and the rest of the track.  Record it when you know what you are playing.
    If you want to you can mute the first take that should look like this:

  • How to record multiple tracks together?

    Ok, completely new to garage band, but I don't see why this is so difficult to figure out. I get how to record a track, and then play it as a loop. But how do I then record something new WITH that loop, so that the two tracks play together (and not just record over it, deleting the first track). For example, how can I record a rhythm part on the guitar, stop it, hit the loop button, and then record a solo over it? Everytime I try this it either records over the first recording (deleting it), or even though it looks like its recording when I stop and hit play I am still only hearing the first track. Very frustrating...
    Thanks!!!!

    For example, how can I record a rhythm part on the guitar, stop it, hit the loop button, and then record a solo over it? Everytime I try this it either records over the first recording (deleting it), or even though it looks like its recording when I stop and hit play I am still only hearing the first track. Very frustrating...
    You create a second track for the solo and record to the second track, then play both tracks together. 
    Use the "Record enable" button in the track header to enable only the solo guitar track for recording, once your rhythm loop has been recorded.

  • Trying to record multiple tracks at once with Mixer (Two Microphones)

    I have a Alesis Multimix 4, and two microphones plugged into the mic 1 and mic two inputs.  I am trying to record both, at the same time, to two distinct tracks.  I set Device Class to ASIO in the Audio Hardware section, and delected ASIO4ALL v2 for the Device.  My mixer (I assume) is showing up as USB Aduio CODEC in the ASIO4ALL settings.  When I go back to my multitrack setting, I am given four options for incoming audio: 
    Audio Front Mic Input 1
    Audio Front Mic Input 2
    USB Audio CODEC 1
    USB Audio Codec 2
    No matter what combination I try, when I record, both tracks pick up both microphones.  My goal is to isolate both, so I can apply different settings to both tracks later on, adjust in the mix etc...   The audio only comes through when I pick the USB Audio option.  Thanks in advance. 
    Brett

    I think you've got the right driver selected, otherwise it wouln't work at all. The single most obvious thing to ask you though (I'm sorry if this is too basic) is where you have the pan controls set to? To get each mic to record on a single channel, you'd have to have one panned hard left and the other panned hard right. If you leave them both panned dead centre, that's exactly what you get - both mics on both channels.

  • Record multiple tracks at once in 11?

    Hi
    Can you record more than one track at a time in Garageband 11?

    Shakey64 wrote:
    Can you record more than one track at a time in Garageband 11?
    http://www.bulletsandbones.com/GB/GBFAQ.html#maxtracks
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How do I record multiple tracks while video remains visible?

    Hi,
    I need to create an additional audio track for a video. This will be a recorded voice over that is translating the original into Spanish.
    I would like to do all of this in SoundtrackPro after "Exporting for SoundtrackPro" from Final Cut Pro. However, I cannot figure out how to record an additional track (not just record on top of the audio file). I'm probably going to have to do "takes," so I need tracks!
    Would it be better to use GarageBand and watch the video on Quicktime (or on another monitor)? Or STP on another monitor?
    I'm pretty open to the easiest way to do this and still get good sound. Any hints, tips, and ideas are welcome!
    (Just a note: Once I get my recorded audio, I would like to have the original audio just barely heard beneath the translation...like on the Olympic documentaries. I know how to do this, I just thought I'd throw it out there to keep in mind...)
    thanks,
    theprincessspy

    Hi,
    You can add your video to STP.
    Add additional tracks - Command-T.
    Record on them.
    Mix it.
    Export your mix to QuickTime movie, or AIFF to import back into FCP.

  • Is it possible to record a track that controls other tracks?

    Hello, I'm new to the forum but before I ask my question I did search the Logic manual and the discussion forum using keywords and phrases and I'm still not able to come up with a definite answer.
    Back in the 80s I had a MIDI sequencer program (Dr. Ts) that allowed me to have several MIDI sequence tracks. Each of these tracks could/was assigned either a letter or number and I could record a new track and using the computer keyboard I could start or stop any or all of the sequences/tracks in real time allowing me to record my song. In other words my new track controlled the other tracks. I would love to be able to do this in Logic using my sequences and audio loops. Can someone tell me how this can be done? Thanks

    You can sort of do this with touch tracks in the environment (this let's you assign MIDI regions to your keyboard and trigger them from each key) but it's not exactly the same.
    Ableton Live has a more modern implementation of this, where you can trigger clips and scenes from the keyboard and arrange them like you want.

  • Will a USB or FireWire mixer allow me to record multiple tracks simultaneously in GB?

    Hi there. I'm very much new to home recording but have an acoustic guitar and mic that I'd like to connect up to my iMac. I was wondering if a USB or FireWire mixer would allow me to record each instrument as an individual track in GB or would the sound all be compressed into one track? Many thanks for your help.

    callumbm wrote:
    I was wondering if a USB or FireWire mixer would allow me to record each instrument as an individual track in GB
    yes, but if all you need are two tracks, even an analogue mixing console will work. a tutorial:
    http://www.bulletsandbones.com/GB/Tutorials.html#allaboutrecording2tracks
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Multiple track recording via Firewire

    I want to record multiple tracks, (preferably as individual WAV files,) from a firewire equipped mixing desk which provides direct outputs from each channel via firewire.
    Can Soundtrack, (not Pro,) allow me to do this? I'd like to lay down up to 24 tracks at a time if possible.
    Normaly I edit on ProTools LE with a dual 2GHz G5, but for convenience I'd prefer to use a 12" iBook as I'd be on location. Am I correct in thinking that it would be fine for basic track laying?
    LEE

    Thanks Dave.
    Tell me, do you know of file size importing limitations with Logic Express. The Digidesign people are telling me there is a 2Gb file limitation for importation into ProTools LE.
    I was planning on backing up recording multiple WAV files on a Mackie hard disc multi-track recorder that creates separate mono WAV files for each track.
    Snag is that I was hoping to hit record and leave it running for several hours - which could create WAV files that are quite sizable.
    Either that or find a way to cut a WAV file into smaller pieces - but I've got a feeling that its not possible to do this.
    LEE

Maybe you are looking for

  • Animated Gif Image does not render correctly on screen

    I have added animated gif image to the scene it does not render correctely.it shakes on the screen. plz give me any suggestion i use following code Image logo= new Image(getClass().getResourceAsStream("images/image.gif")); logoLabel.setGraphic(new Im

  • Should I be worried?

    I am aware of 'a poorly bird of prey' (ill eagle) P2P downloading. I have NOT (knowlingly) downloaded anything illegal so I should be 'safe'. I even opted out of Fon as a precaution so nobody can use MY details to log onto a Fon spot (if I've been ha

  • Once object code is compiled and converted to a CIN, how do you view the original c code?

    I am editing a VI written a few years ago, and I want to view the c code referenced by a CIN. I cannot find this original c code, so I want to know if Labview can allow me to find and view the native c code. Any suggestions?

  • How to use magic move with connection lines?

    When I use magic move with connection lines, they disappear and reappear in the next slide. It seems like magic move doesn't recognize the connection lines (or can't match them), so it just redraws them, instead of leaving them there. I'm trying to u

  • Tab in PO

    Hi All,        At the item level in PO we have differnt TABs, like conditions<b>, invoice,texts, material data,etc.</b> If I want to change the sequence of these TABs in PO as per my choice, is it possible? How? like in material master we can change