Is it possible to reduce the size of a single image on a slide now in keynote 6.0?
This feature seems to have disappeared in the update and the only option is to reduce the whole file size..
Thanks!
Hi Gary
Sorry should have been clearer - I mean reduce size of the image in byte terms not resize. In keynote 09 you could use format>image>reduce size fo rthe slected image only.
It was a better way of just dealing with a specific bloated image rather than reducing the resolution of images throughout.
Chris
Similar Messages
-
How to reduce the size of a jpeg2000 image ?
Hi all,
I use Java ImageIO to :
- create JPEG images from JPEG2000 images
- create JPEG2000 images from JPEG images
The transformation JPEG2000 to JPEG works fine. The transformation JPEG to JPEG2000 works too, but the JPEG2000 images that I get have a size too big.
=> For a JPEG image 640x480 with a size 43 Kb, I get a JPEG2000 image with a size 170 Kb
=> For a JPEG image 800x600 with a size 66 Kb, I get a JPEG2000 image with a size 276 Kb
I tried to change many parameters in the J2KImageWriteParam object :
final J2KImageWriteParam paramJ2K = new J2KImageWriteParam();
paramJ2K.setLossless(false);
paramJ2K.setCompressionMode(ImageWriteParam.MODE_EXPLICIT);
paramJ2K.setCompressionType("JPEG2000");
paramJ2K.setCompressionQuality(0.5F);
paramJ2K.setEncodingRate(Double.MAX_VALUE);
paramJ2K.setFilter(J2KImageWriteParam.FILTER_53);
// paramJ2K.setWriteCodeStreamOnly(true);
// paramJ2K.setComponentTransformation(true);
// paramJ2K.setProgressionType("res"); //Resolution-Layer-Component-Position
// paramJ2K.setProgressionType("layer"); //Layer-Resolution-Component-Position
// paramJ2K.setProgressionType("res-pos"); //Resolution-Position-Component-Layer
// paramJ2K.setProgressionType("pos-comp"); //Position-Component-Resolution-Layer
// paramJ2K.setProgressionType("comp-pos"); //Component-Position-Resolution-Layer But, whatever the values, I still have the same size.
Can someone help me please ?
ThanxHi,
I found a solution, for those interested :
I change filter to have this :
paramJ2K.setFilter(J2KImageWriteParam.FILTER_97);So I get a JPEG2000 with very good quality and a size ~40 Kb.
Nevertheless, whatever the value I set for compression quality and encoding rate, it has no effect on the quality and the size of the JPEG2000 image, I don't know why... -
The printing should come of actual size half on front and half on back of A4 paper.
Hi Fakhar,
That is not possible without reducing the size. It cant be possible at all.
Regards,
Ajlan Huda. -
Hi all,
I am interested to know whether is it possible to reduce the size of mymt.zip ? . As java web start at the first instance caches all of the jar and zip files but this size is too huge even for the first time.Can lazy loading help us here ? or is there other way round ? . If some of u knows about this then pls share.
regards
MangeshWhat is contained in this ZIP file? You can use obfuscation to reduce the sizes of class files, also you can make sure your JAR is compressed vs. uncompressed.
Rob -
How do In reduce the size (programatically) of an image in JAVA ?
Maybe the April 7, 2004 tip on [url http://java.sun.com/developer/JDCTechTips/]Filtering and Transforming Digital Images will be of some help.
-
Most of my iPhone 4 memory is taken up with "other" there is no reason for this. I have tried to clear as much history as possible but cannot reduce the size of this.
Try
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears) -
Although I have two screens I still need to keep my windows quite small and I was wondering if it was possible to automatically reduce the size of the web page to match the size of the available space in the window instead of having side bars sliders so if I needed to read text then I could just increase the window size and the web page would expand accordingly.
Enable audience for that webpart. Keep users who have access to that list\library :)
http://office.microsoft.com/en-in/sharepoint-server-help/target-content-to-specific-audiences-HA010169053.aspx
http://office.microsoft.com/en-in/sharepoint-server-help/introduction-to-targeting-content-on-a-sharepoint-site-to-specific-audiences-HA010243222.aspx
If this helped you resolve your issue, please mark it Answered -
How do i reduce the size of the pdf's scanned from my printer
i scan from my printer to a pdf. the file comes across way to big (2mb for 4 pages with no pictures & just text, etc.) i have already re-set the settings on my scanner / printer to try to get the smallest dpi & image possible. how do i get to the settings on my adobe acrobat to reduce the size of the pdf when saved on my computer or is this not the right place to do that?
m spires wrote:
i have already re-set the settings on my scanner / printer to try to get the smallest dpi & image possible.
You may need to reset that to use higher scan quality for successful OCR. -
How can I reduce the size of a pdf file for emailing?
I want to send a pdf file which is 8 mb, it has bounced in an email because it is too big, how can I reduce the size of the pdf file for emailing?
Sometimes a simple "Save As" will reduce the file size slightly, but probably not enough to pass the <8 mb threshold of your recipient, as you need.
You've probably seen it, try the next option in the Save As menu, "Reduced Size PDF," and make it compatible with the latest version possible, again considering the recipient. This suggestion assumes Acrobat X. You don't say which version you're using, but this tool was available at least going back to Version 8, but in a different place, you'll have to hunt.
If all that doesn't work, you could remove some images from the source document, which also will reduce the overall size.
Best luck. -
How do I reduce the size of a scanned PDF file?
I scanned a document from my HP Printer to a thumb drive. The document is too large to email. I need to reduce the size to make it possible to email it. I can't find anything in the Tutorials or Manual on how to do that. Does anyone know?
Save As Other>Reduce PDF File or Optimize PDF. The latter gives more control. The basic process for a scanned PDF is to reduce the pixel resolution that both of these process try to do. Sometimes the file actually gets bigger because of the processing (can't explain that). Also, when you save use Save As, not Save. Save retains any changes that are made.
You might also consider doing OCR with the ClearScan option (the searchable formats will not reduce size), but then have to deal with potential error corrections in the OCR.
Hopefully I have not confused the issue with the side comments. -
How to reduce the size of Input Schedule (Excel Template)
Hi,
I am preparing Static Input Schedule (Due to complexity, I am unable to use EvDRE). Due to many EvSND's and Formulas used in the template, the file size is almost more than 10 MB.
So it takes a lot of time while opening the template. So is there any way to reduce the size of the excel file (Input Schedule template).Here are some suggestions on ways to reduce the size of your static input template, which sounds to be rather large. Please note that these suggestions are not in any order with regards to being the most effective in reducing the template, but overall should help in reducing the size.
- Make the EvSNDS as dynamic as possible. Even though it is a static template, try not to use an EvSND formula which contains a reference to each dimension you are loading to. I'm not sure how many dimensions you have in you application, but if you are referencing 12 dimensions in each EvSND, and you have thousands of EvSNDS, that takes alot of size. So, if you are doing this, see if there is any commonality with any dimension with the input schedule and hardcode that dimension's member in the control panel. For example, if all the evsnds are going to the same Category (i.e. BUDGET), you do not need to reference the cell with memberid BUDGET in each evsnd cell, but instead be sure it is set in the Control Panel of the Template correctly.
- Only have base level members in the input template. Many input templates are built so that after the data is sent, the summary level (or parent level members), are retrieved in the template so users can see summarized results after a send. If possible, build the report with base level members only, and build a report to view summarized report.
- Keep the number of Woksheets in the template to a minimum.
- Make the layout of the report as simple as possible. Try to keep the Conditional Formatting to a minimum.
- With regards to the formulas in the template which you mention, I'm not sure if you are referring to Excel calculation formulas, or something else, however you do want to keep the use of formulas to a minimum.
I hope this information helps. -
Question on Blu ray image size output and reducing the size
Hi
I have been using encore for blu ray projects which is been proving very helpful. However recently i have had a issue with output size on files. Normally Encore gives me it's estimate that it will fill the disc nicely and provides a image/folder which is about 17-20GB (using 25GB disc) but now out of the blue it's files sizes it outputs has been 24.8GB which technically is less than 25GB but as anyone knows who burns to media, the disc doesn't actually have 25GB of space (something like 23,8 or something, i can't remember without checking). Anyway of course this is a issue because my output size is contantly now coming up to be about 600MB - 1GB over the disc actual size, i figured Encore normally compresses files to fit considering i have burned similar amounts/size media before and never had a issue.
Anyway my issue is the slightly larger file size, i figured the easiest way to reduce the blu ray output size was to of course play with the transcode settings, which usually are set to the default settings for Blu ray (the quality preset is called something like "1280x720p 50 High Quality MPEG-2") so of course i thought to lower the bitrate a little just for a test, so i did just that and cut the default bit rate from 25[Mbs] to 20, i didn't want to lower it too much as it was a test to see what i could save for file size. Anyway so i re-transcoded the file and built another image, sadly the image size oddly enough came out as 26.something GB... so it actually grew in size by reducing the file bitrate which put me at a loss. I was wondering what common ways i could use to lower this file size just by a few hundred MB or up to 1GB in this case without having to remove content from the disc (it would be a waste to not only seperate the content but to use a whole disc for a leftover 600mb-1gb project). I of course want to keep quality as high as possible but i understand when trying to reduce size quality has to normally be hit in these situations so i can deal with a slight loss of quality. I have been browsing the forums here and though some topics seem similar they have the issue of file sizes coming out as 40GB+.
Now im no genius with Encore, normally as said the file size is always between 17-20GB as i figure encore was using a "fit to disc" type feature but because the output size is technically below 25gb but not actually below enough to burn i was wondering 2 things:
1) is it possible to make encore it's self shrink these files a little more, lowering the target size down by 1GB would do wonders but only option i have seen is to have a 25GB disc or DL disc with no option to customize the output size (forcefully lowering it by 1GB).
2) because i imagine the above can't be done i was wondering how to go about reducing the size by around 1GB or so, i don't need like 10GB freeing up so it's only a small amount, as said this is a issue i have had with the last few projects i made and the size varies from needing 600MB - 1GB (it doesn't usually exceed needing 1GB free space... besides when i lowered the bit rate which increased size a lot). In the past i always just cut the bitrate of files down a little (never by lots but enough to free space up) but clearly that failed my test so im at a loss of how to reduce file size without a huge loss in quality.
For the record i have already produced the file as both a image file and a folder and both have the same issue.
Extra info on the project:
It contains 4 Menu's, 13 video files which vary in lengh from short ones at about 5mintues to longer ones which the largest is about 20minutes. I commonly burn this number of video files/space with fine quality and no issue so i would rather not take files from the project.
quality preset details are defaultly as said above set to "1280x720p 50 High quality MPEG-2" settings, i am not on my computer with encore at the moment so i can't post full specifics right now but if you have encore handy you should be able to check.
Tried reducing bit rate but that increased overall size, the actual plan was to hopefully lower the bit rate to around 21 [mbs] (from 25) and then do that for multiple (or all) files until it fitted but after it increased the size i lost hope there, it said the estimated file size (on the individual video) would drop by around 300-400mb but that didn't work.
I have tried both folder and iso which always come out the same size.
Basically my main question/problem is any suggestion to drop the file size by up to 1GB without taking items out the project or a real high loss in quality (i don't mind small loss though as i can apply whatever solution to all files which should help).
Any suggestions what i can try? as you probably gather im not a genius when it comes to this stuff but i tried including what i thought is relevent.Hi and thank you for the reply;
one problem i seem to be having when reducing the bitrate is the file size is oddly increasing from 24.8GB to 26.4GB, i can't really figure this one out as well it's having the oppisite effect. I checked the "streams" folder on output and decided to compare automatic transcoding to manual lowered bitrate and im not too sure where the increased file size is going, i found which video file it was causing the issue, all videos files range or average around 1.6GB each but one file was taking 4.5GB, after lowering that files bitrate it cut it down to 2GB which was of course saving me 2GB from the old file but the overall size had increased which was odd. Seems the other files are all the same so it hasn't tried improving them (so it seems) so i can't make ends of why the size is increasing.
I will try playing with the source file to see if i can do anything that way, if not i will try transcoding in premiere (i have had troubles with this before so i try to avoid it).
Oh and yes i was using Automatic.
Anyway i will see if editing the file outside might help first and see how that works. Thanks again for the reply. -
How to reduce the size of Temporary Tablespace - URGENT
Hi all,
I need your help urgently. I have one Default Temporary Tablespace TEMP in my Oracle 9i database. There are two files in the tablespace each of size 32GB. I need to reduce the size or if possible i need to remove on datafile from the tablespace.
Could you please provide me with the solution of this?
This is really very urgent.
Thanks in advance
HimanshuAdd a new temporary tablespace.
Set this to default database temp tablespace.
Then you can drop the old TS when all the pending transactions are complete if they are using temp space.
Also, you need to investigate as to why your temp tablespace files were 32 GB in size. Looks like your application is doing too much sorting. -
Want to reduce the size of database
Hi Guys,
We have Oracle 10G database over Unix platform, Customer want to reduce the size of database as much as possible and the ami of customer to move the storage area of this database to other one. so we resize some datafiles and get lots of free space at mount point but while checking the utilzation of table is showing somw what different as other . kindly the below O/P:
% MaxPoss Max
Tablespace Name KBytes Used Free Used Largest Kbytes Used
*a DATA 45,875,200 8,740,992 37,134,208 19.1 1,728,512 100,663,248 45.6
*a HIGH_S_DATA 21,504,000 1,331,520 20,172,480 6.2 3,048,704 0 .0
*a HIGH_S_IND 15,360,000 853,568 14,506,432 5.6 1,661,504 0 .0
*a IND_DATA 57,241,600 3,512,832 53,728,768 6.1 3,995,648 100,663,248 56.9
*a LOW_S_DATA 357,376,000 28,436,736 328,939,264 8.0 4,063,232 167,772,080 213.0
*a LOW_S_IND 268,902,400 12,148,352 256,754,048 4.5 4,063,232 67,108,832 400.7
*a SYSAUX 1,433,600 897,152 536,448 62.6 485,312 33,554,416 4.3
*a UNPARSED_DATA 102,400 128 102,272 .1 102,272 0 .0
*a USERS 4,096,000 64 4,095,936 .0 4,063,232 33,554,416 12.2
*m SYSTEM 1,433,600 835,520 598,080 58.3 597,952 33,554,416 4.3
*m TEMP 54,033,408 54,033,408 0 100.0 0 33,554,416 161.0
*m UNDOTBS1 37,650,416 426,416 37,224,000 1.1 4,063,232 33,554,416 112.2
sum 865,008,624 111,216,688 753,791,936
SQL> select sum(bytes/1024/1024/1024) from dba_segments;
SUM(BYTES/1024/1024/1024)
54.5392456
SQL> select sum(bytes/1024/1024/1024) from dba_data_files;
SUM(BYTES/1024/1024/1024)
773.406235above all o/p is different, no able to understand it. please help me in this .
Could you please tell me is there any way to reset the HWM at Datafile level and how we reset the HWM of those tables having Materlized view?Hello,
I'm not really sure what is the problem here? Everything seems to be OK. From what I have seen ,your database can stand to be resized down quite a bit.
The actual amount it can be resized down depends on the highet HWM for the segments in the datafile, as in:
set line 200col file_name format a90
select file_name,
ceil( (nvl(hwm,1)*&&blksize)/1024/1024 ) USED_SPACE,
ceil( blocks*&&blksize/1024/1024) SIZE,
ceil( blocks*&&blksize/1024/1024) -
ceil( (nvl(hwm,1)*&&blksize)/1024/1024 ) ECONOMY --how much of the space can be reclaimed
from dba_data_files a,
( select file_id, max(block_id+blocks-1) hwm -- here we get the max hwm for the datafile from the extents residing within it
from dba_extents
group by file_id ) b
where a.file_id = b.file_id(+)
and ceil( blocks*&&blksize/1024/1024) -
ceil( (nvl(hwm,1)*&&blksize)/1024/1024 ) > 2000
>
You can also do a reorganization of the segment you suspect has a high degree of reclaimable space within its extents (high HWM and low actual space used). You can run segment advisor to help with that.
Hope it helps, -
How to reduce the size of Checkbox and radiobutton
Sir,
We are using <af:tableSelectMany> and <af:tableSelectOne> in <af:table>. It provides a checkbox /radiobutton by itself. Can we reduce the size of these controls put inside these tables. Its showing a fixed size everywhere. So we cannot reduce the height of each row of the table. If possible, give an example of its implementation. as I am new to JSF.
with regards,
Anila.Hi Monika,
Nice to read you again. Thank you for your response.
Yes, I read. It does not solve the problem about which I write. I guess that solves your opinion? Please hint.
Maybe you are looking for
-
Please can someone tell me how to retrieve my security question??
forgot my security question answer what I do now?
-
Linking two fields in a dictionary view to the same field
My DBA asked me if I knew how to do this without resorting to ABAP code, and I said I'd ask you guys over here. A customer wants a view on several tables. Vendor name from LFA1 is one of the columns in the view. He has two other columns in the view
-
Just upgraded to 2.3 and now my QT files with ac3 5.1 surround audio are not being pass-through, Anyone else having this issue? Regular 2ch audio comes through fine through optical cable but no ac3 passthrough. I have a huge video library set for str
-
Hello Experts I have one scenario to be created for dedcution of TDS. if the amount is below 50000/- TDS to be deducted at 5% rate and if it is above 50000/- TDS to be deducted at 10% rate. can anyone explain me how to make this scenario. Regards Kum
-
Pictures with a large amount of white
I am digitalising the botanical paintings of my wife, and have some issues with getting the white background of the paintings white instead of light grey. I use the X-rite color checker passport for getting accurate colors, and I guess I should use t