Is it possible to remove an activity from a BP

Hi Experts,
I have created a new activity (from an email from Outlook Integration) which is stored against the BP C10034. 
However, it should have been saved again BP C10043... can I remove this activity from the BP's Related Activities screen?  There doesn't seem to be an option to do so.
Thanks
Greig

Jeyakanthan,
Thanks - this works for Activities such as meetings, but when I try this for an Activity created from Outlook Integration the Remove option is greyed out.
I take it this means that it is not possible.
Thanks
Greig

Similar Messages

  • Remove DRM activation from all my devices

    remove DRM activation from all my devices. My ID is ....

    Adobe Live Chat: http://www.adobe.com/support/chat/ivrchat.html,
    or as a slight short cut try http://helpx.adobe.com/contact.html?product=digital-editions&topic=using-my-product-or-ser vice
    Click on 'I still need help' and then you should see 'Chat with an Agent' at the bottom of the page.
    'Ask our experts' will indeed just lead you back to this forum.
    Sometimes you will get ‘Sorry! All agents are busy— please check back soon.’
    Don’t refresh the page, just hang on and it should eventually go to ‘Chat Now, and agent is available’.
    They can reset your authorizations, and then you must reauthorize any devices you still need.
    (Unfortunately, Adobe haven’t got round to an admin website for viewing and editing authorizations.)
    Some of the representatives haven't been properly trained and don't know what to do (and claim there is nothing they can do);
    in that case the only way seems to be to give up that chat and try another session hoping for a properly trained representative.
    If your problem is with another device using Overdrive, Bluefire, Aldiko or similar third party app, it is recommended not to mention that app when on the chat, just mention that you have run out of authorizations  (E_ACT_TOO_MANY_ACTIVATIONS) .  Thanks to AJP_Bear for that tip.

  • Is it Possible to Remove a Library from iTunes 12?

    I am trying to fix a synching issue in which, long story short, iTunes 12, without my knowledge, forced a move of my Books library from My Documents folder to the iTunes Media folder, and now the synching of my books is all f***ed up.  So I would like to try remove all book fodlers from the iTunes library and re-establish the Books library to where I originally had it.
    I guess the two main questions I have are:
    - I know how to add a folder to the library, but is it even possible to remove a folder from the library?
    - If I could do this, would what I am trying to accomplish even work?

    There are a few ways. Perhaps the simplest for you, since you only want to eliminate the first minute, is to use the Cycle Region. Press C on your keyboard (or the circular arrows button in the Transport controls) and you'll see a yellow bar appear at the top of the Timeline. You can move and resize it over the portion of the song you want to export. (Try zooming in to get it to an exact spot.) Then you use the Share menu to export the song while the Cycle Region is visible and only that portion will get exported.
    Alternately, you can highlight the portion you want to delete in the Track Editor and hit Delete/Backspace. Then you'd have to move the remaining region to the beginning of the Timeline and then move the End Of Song Marker to the end before you export.
    Depending on what you're going to use the song for, you can export at full (aiff) quality, or compress to mp3.

  • HT1766 Is it possible to remove icloud settings from my phone and restore it to its original apple settings?

    I would like to know if its possible to remove icloud settings from my 3g apple iphone

    Next time it is best to start your own topic.
    Go to Settings>iCloud - you will need to scroll the settings until you get to the iCloud settings.
    MJ

  • So my brother is using my e-mail address and number for iMessage on his iPad and i do not want that but he is far away, is it possible to remove a device from using my e-mail address from my macbook ?

    So my brother is using my e-mail address and number for iMessage on his iPad and i do not want that but he is far away, is it possible to remove a device from using my e-mail address from my macbook ?

    Hi ShantellePhilips,
    Thanks for visiting Apple Support Communities.
    If your brother's iPad is using your Apple ID and phone number, and you want to remove this association, you can reset your Apple ID password. See this link for more information:
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Note: If you no longer have access to the [iOS device] that is using the number you want to remove, reset your Apple ID password.
    Apple ID: Changing your password
    http://support.apple.com/kb/HT5624
    All the best,
    Jeremy

  • Is it possible to remove xml declaration from a target HTTP msg in PI 7.1?

    Hello,
    I am working on a SOAP to HTTP scenario in PI 7.1.
    I am using a java mapping to create a target string. This target string does not contain XML declaration(<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>) in it.
    To elaborate the issue, while testing the message mapping, this XML declaration is not being prefixed to the message content. But, in integration engine, the http target message is being prefixed by this XML declaration by default.
    Output when tested in Operation Mapping(Desired result):
    abc=123:def=456
    Output been sent to receiver:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?> abc=123:def=456
    Is there any possibility to send a  HTTP message to the receiver without this XML declartion. In other words, I need only the message content to be sent to the receiver.
    Kindly suggest.
    Regards,
    Swetha

    Hi,
    You can use JAVA/or XSLT mapping
    See this for Code
    Remove Encoding UTF from xml declaration in PI

  • Is it possible to create an activity from the Agenda?

    Hi Experts,
    We noticed that it's possible to create a note from SSC1 Tcode but not an activity.
    When we create an activity (appointment), it appears in the agenda but  we can't manage to create it from the agenda.
    Is there any possibilities ?
    Many Thanks
    Laurent

    Hi,
    You can create the activity by double clicking on appointment calendar.
    Go to Tcode : crmd_order and select calendar tab.Double click on any time of the calendar and select the appropriate transaction type for activity.
    Then you will be able to create the activity.
    If helpful kindly reward me.
    Thanks & Regards,
    Anirban

  • Mail - Is it possible to remove an email from a discussion without deleting it?

    As the question says... is it possible within Mail to remove an email from a Conversation without deleting the email? I have an email that is incorrectly being allocated to a particular conversation and I want to remove the link to the conversation but wish for the email to remain in the inbox but without being linked to the conversation.
    Is this possible within Mail? If so how does one do it?
    thanks,
    Chris

    Click on the arrow next to the number of emails in the conversation. That'll show you each separate email. You can create a new mailbox (call it what you want) and drag that email out of the conversation into that mailbox.

  • Is it possible to remove a trigger from a composition?

    I've got a portfolio-type website where I'm using a series of thumbnail stills in a composition to trigger a lightbox with larger examples of the stills. I want to change a couple of the thumbnail triggers so they send the user to an external website instead of the lightbox popup. Is that possible or do I need to disassemble the current build and rebuild with selective items in the lightbox comp? Apologies if this has come up before, I did a quick search but am new to Muse and the community forums here. Thanks!

    So if I understand this correctly, you would like to use the Lightbox composition widget with say like three triggers, but have only two of them pop up an image in a lightbox, the other trigger should take you to an external website? If that is what you'd like to achieve, you can add a rectangle over one of the triggers with the same color as that of the background, remove the stroke from it and link it.
    Thanks,
    Vinayak

  • Is it possible to remove a keyword from multiple images?

    There has to be some way to delete a keyword from multiple images, yet I can't figure it out. I know you can replace keywords via lift and stamp, but sometimes I may need to remove a keyword while leaving other different keywords in other images. If this cannot currently be done it needs to be fixed.

    1. select the images you want to remove a keyword from
    2. in the keyword field at the bottom type in the keyword you want to remove
    3. hold down shift, and hit enter
    Instead of assigning the keyword to the selected images, the keyword will be removed.

  • Is it possible to remove XMLSchema restriction from an XMLType column?

    I have an XMLType column that is validated via some XMLSchema. Now I want to remove this restriction and make it just a generic XMLType column.
    I tried bunch of alter table commands but I couldn't figure out the magic combination.
    Is this possible?
    Here is the actual problem. Unfortunately, we ended up both local and global schemas using the same URL. We have customers
    out there with both schemas (early customers) or only global schema (new customers). Most of the tables were created before the global schema
    was added. So, they are referencing the local schema. Now we want to evolve our schema, and I am trying to write a sql script to clean-up this mess.
    My plan is:
    if only global schema exists then (these are late customers)
    - do nothing
    else if both global and local schema exist then (these are early customers)
    - If any table or table.column has dependency on local schema (I can find this out from user_dependencies) I am going to mark those
    tables/columns as no schema validated. i.e. remove all references to local schema
    - delete and purge the local schema
    - modify those tables/columns and make them point to the global schema
    end if
    - evolve the schema (only global one is left)
    Is there a better way/plan? Is there a way to modify a column definition and move its reference from local schema to global schema where
    both schemas have the same URL?
    Of course the main constraint is that we do not want to loose customer data. By the way, both local and global schemas are identical in terms of xsd.
    I guess a more generic question would be, is it possible to change XMLSchema/Element settings of an XMLType column from X to Y, X to null, or null to X? (Of course the assumption is Y is a superset of X.)

    Couple of Questions ?
    Which verson of the database...
    Are you using the XML DB repository to provide path based access to the XML Content.
    In general
    1. You cannot break the associated between a table and it's schema..
    So if I understand waht you want to do you will have to do something different..
    Copy the data into a non schema based table (Either XMLType Store AS CLOB or XMLType store as SecureFile Binary XML).
    YOu probably want to invoke the createNonSchemaBasedXML() operator when inserting the XML non schema based table.
    Once all the data is copied, delete and purge the local schema, and all of it's types and tables.
    Create a new table based on the Global Schema.
    Copy the database back into the new table..
    I know two data copies are a PITA, but I can think of no other way of doing this. The Schema Based XML representation contains references that can only be decoded by using the XML Schema that was used to encode the references. This appies to both Schema Based Binary XML and Object Relational Storage.

  • Bug or feature: possible to remove a child from unmodifiableChildren

    with kind of pathological code, though, see below ; - ) The trick is to add it to a parent which allows child list modifications, then internals silently reparent the child (same as swing Container add does).
    Question is, should (could?) internal protect their children better? Or maybe more basic: why does Parent expose the children list at all? Internally, it's rarely used. What would client code do with it?
    (a related discussion - maybe missing api to detect if a subclass of Parent allows modification of its child list: Scene root and Parent subclasses
    Cheers
    Jeanette
    public class UnmodifiableChildListRemove extends Application {
        public static void main(String[] args) {
            Application.launch(args);
        @Override
        public void start(Stage primaryStage) throws Exception {
            final HBox hBox = new HBox();
            final TextBox textBox = new TextBox(20);
            textBox.setPromptText("Prompt one");
            Button button = new Button("Click");
            button.setOnAction(new EventHandler<ActionEvent>() {
                @Override
                public void handle(ActionEvent event) {
                    hBox.getChildren()
                            .add(textBox.getChildrenUnmodifiable().get(0));
            hBox.getChildren().addAll(textBox, button);
            Scene scene = new Scene(hBox);
            primaryStage.setScene(scene);
            primaryStage.setVisible(true);
    }

    Richard Bair wrote:
    Yep, that's by design. The alternative (which we did for a time) of simply failing when a child is added to two parents fails miserably in a declarative-with-bind use case.
    Hmm ... not quite sure if I like that.
    Maybe I wasn't clear enough: my point is not about the silent reparenting if that would be valid modification (aka: doable by public api), that is both old and new parent have a public getChildren() to add/remove. It's about the illegal removal from the old (which doesn't allow public child list modification).
    Combined with the requirements in the other thread, it feels like a bit of missing api to publicly be able to distinguish child-modifiable parents from those that don't allow it.
    Something raw thinking:
    // on parent
    * A read-only property denoting whether this Parent allows
    * remove/add of children. 
    public boolean allowsChildListModification() {
        return false;
    * Returns an ObservableList of this Parent's children. If 
    * !allowsChildListModification this is an unmodifiable list
    * which will throw SomeException on attempts to add/remove, 
    * otherwise the list can be used to add/remove children.
    public ObservableList<Node> getChildren() {
      * Sets the node's parent to newParent. If the node already has
      * a parent, it's removed from the old if child list modifications
      * are allowed on both old and new parent.
      * If not ... (either fail silently or throw an IllegalState)
    void reparent(Node node, Parent newParent) {
         if (node.getParent() != null) {
              // either let the unmodifiable do the throwing job
              //node.getParent().getChildren().remove(node);
              // or check if allowed and act accordingly
              if (!node.getParent().allowsChildListModification()) {
                return;
    }You already know that I don't like exposing the modifiable lists at all, would prefer cover methods - but that's another story ; - )
    As for why Parent exposes the immutable list of children -- this is so you can walk the scene graph, which is very useful for tools and frameworks and other such kinds of code that people want to write.ahh ... good point, thanks!
    CU
    Jeanette

  • Is it possible to remove a video from a window and play it separately?

    I'm trying to watch a live stream from a website. Unfortunately all the other information on the website is useless to me. Is there a way that I could remove the video player from the browser and play it on its own? If not, is there a way that I can make the video larger without sending the video into full screen? I disable the other boxes from showing on screen, but still the video is too small.
    Please note that the stream is completely legal and paid for.

    Okay, that's what I figured. I had zoomed in on the browser before, but I was just curious if there was a more elegant way to enlarge the player. Thanik you for your help!
    Maybe this is something Adobe can look into (popping the player out). It'd be very useful for those of us in the corporate world who need to watch the news or tickers without having to be stuck on the browser. Yes tabs are available, but then it obscures the video. A stay on top tool option would be useful as well.

  • Is it possible to remove XML properties from a PDF form?

    I created a PDF version of our employment application in Acrobat and Live Cycle Designer. I'm knew to Acrobat and somewhere along the line, must have turned on XML. Now I want to combine the application with another document but I can only do that as a package, which I have done, but it throws people off and I'd rather make one document that's not a package. I can't do that with an Adobe XML
    Is it possible to turn off XML without recreating the document?

    Not really without hacking the PDF form you created.  If you still want to go that way and the form is NOT a dynamic form then find a utility like WindJack's PDF CanOpener.  Make a copy of the document and open it in either Acrobat with PDF CanOpener plug-in and navigate through the PDF innards and find the XFA dictionary and delete it.  Then Save the document. You will need to re-edit and arrange any JavaScript actions in the saved form because Acrobat and Designer use two different JS engines.
    Ta
    Rocky

  • Is it possible to remove hard drive from G5 and install it on new MacPro?

    My G5 will not power up and I have files that are not backed up. Can I install the hard drive from the G5 into an empty bay onto my new MacPro and copy them over on the MacPro? Is this something that can be done or do I need to just take the G5 into the Apple repair store and have the files copied on a DVD?
    Thank you.

    Your new Mac Pro uses GUID, which will required for insalling OS X, good idea to reformat the drive again afterwards.
    I'd put it in a FW case, use that (reformatted) as external system backup and emergencies.
    The manuals, specs, help articles, Mac Pro forum -
    http://www.apple.com/support/macpro

Maybe you are looking for