Is it possible to remove any built in columns?

I might have used some built-in columns in my list, is it possible to remove them?There is no DELETE button when I open the column. I am Admin of the site.
Thanks.

Hello,
Why you want to remove them? Anyway you can't delete them but you can hide them from users while viewing the items (i.e. modify the list view and uncheck column which you don't want to show).
I would suggest keep them as it is in list and create new column as per your business requirement.
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Similar Messages

I have got a lot of apps, which are not installed on any of my iDevices anymore. is there a possibility to remove all those apps from iTunes without searching which ones are, and which ones aren't installed on one of my iDevices?

I have got a lot of apps, which are not installed on any of my iDevices anymore. is there a possibility to remove all those apps from iTunes without searching which ones are, and which ones aren't installed on one of my iDevices?

Assuming all the device(s) have been synced to this computer as its Home computer. The easiest way would be to delete all the apps from iTunes. After which connect your device(s) to the computer (iTunes) and transfer purchases from the device(s) by right click (control click) the device name in the left sidebar and the click transfer purchases. When done only the apps on your device(s) will be in you iTunes library.
Hope that helps

HT2509 Despite what this article states, Apple support told me not to try to remove any fonts as it could cause other possibly serious problems. Is there a program which can be safely installed which will keep at the top of the font list those fonts whic

An article in the New York Times yesterday told how to remove unwanted fonts from the Font Book. I followed its instructions (the same as those on the webpage "support.apple.com/kb/ht2509") and was NOT successful in removing fonts. Despite what the newspaper article and the web page stated, my attempts to remove fonts were unsuccessful. I use perhaps 15-20 of the hundreds and hundreds of fonts, and deleting those I don't use would make choosing a font a lot faster. I called support and was told not to try to remove any fonts which I myself had not added to the list(I have not added any) as doing so could cause significant problems elsewhere. The support tech suggested that there might be independent software programs which would keep at the top of the list those fonts I have used, which sure would speed up the process of selecting a font. Anyone know of such a program, or how to safely alter the font list Thanks.

I just spoke again to tech support and this time an answer was provided that works! Choose the font you want to use, drag it to the left, and a new "unnamed" folder will appear. Continue to drag into that folder fonts you want to use. You can click onto that folder to change its name. Then when using font book merely click on that folder to open it and select the font wanted. This tech rep also confirmed that you should NOT try to delete individual fonts as they are part of the basic operating system; he did confirm that the apple web page in parentheses above says otherwise, and will refer that to higher ups to see about removing or modifying that page.

Is it possible to override the built-in PDF format handler with a custom IFilter for PDF?

Hi,
SharePoint 2013 comes with a built-in "format handler" for PDF now, so it can index PDF files out of the box. This is great for most users, as it now no longer is necessary to install a third-party IFilter for crawling PDF documents.
My question is, is it possible to override the built-in format handler for PDF with a custom IFilter for PDF? I played with the Set-SPEnterpriseSearchFileFormatState and Remove-SPEnterpriseSearchFileFormat cmdlets. While it is possible to deactivate
the built-in format handler, I was not able to remove it and to create a new one that activates a custom IFilter for PDF files.
Background of the question: While the new built-in format handler for PDF will probably be sufficient for many SharePoint users, some need additional capabilities regarding indexing if PDF documents, e.g. extraction of custom metadata from PDF's document
information dictionary and embedded XMP metadata. PDFlib GmbH, the company I work form, sells an IFilter for PDF, and of course we would like to continue to offer this for SharePoint 2013.
Thanks
Stephan

You should be able to replace it with any ifilter you want, this is the procedure for installing it:
Install PDF iFilter 9.0 (64 bit) from
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4025 (http://www.adobe.com/support/downloads/detail.jsp?ftpID=4025)
Download PDF icon picture from Adobe web site
http://www.adobe.com/misc/linking.html (http://www.adobe.com/misc/linking.html) and copy to C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\TEMPLATE\IMAGES\
Add the following entry in docIcon.xml file, which can be found at: C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\TEMPLATE\XML
<Mapping Key="pdf" Value="pdficon_small.png" />
Add pdf file type on the File Type page under Search Service Application
Open regedit
Navigate to the following location:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office Server\15.0\Search\Setup\ContentIndexCommon\Filters\Extension
Right-click > Click New > Key to create a new key for .pdf
Add the following GUID in the default value
{E8978DA6-047F-4E3D-9C78-CDBE46041603}
•Restart the SharePoint Server Search 15
•Reboot the SharePoint servers in Farm
•Create a Test site (with any out-of-box site template) and create a document library upload any sample PDF document(s).
•Perform FULL Crawl to get search result.
Once the crawl is completed we will get search results.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

I would like to uninstall or otherwise safely remove any applications that make my MB Pro run slowly.

I would like to uninstall or otherwise safely remove any applications that make my MB Pro run slowly. I will have to keep a few apps such as CrossWeb and Veraport due to having to use secure banking and government websites in Korea. I also need the LogMeIn app to access a server in the USA, but I realise that some people recommend getting rid of it.
I tried but apparently have been unsuccessful in removing a McAfee VirusScan application completely. I can still see some files in the HD Library. Any ideas here on how to safely uninstall/remove?
Also any suggestions on how to get rid of my incompatible virtualbox? I think it's 4.0.4.
Also, if you see anything else I should uninstall/remove from the EtreCheck below, by all means please make suggestions.
Thanks so much for your help, suggestions, and advice!
Hardware Information:
    MacBook Pro (15-inch, Mid 2010)
    MacBook Pro - model: MacBookPro6,2
    1 2.53 GHz Intel Core i5 CPU: 2 cores
    4 GB RAM
Video Information:
    Intel HD Graphics - VRAM: 288 MB
    NVIDIA GeForce GT 330M - VRAM: 256 MB
System Software:
    OS X 10.9.2 (13C1021) - Uptime: 0 days 1:55:49
Disk Information:
    ST9500325ASG disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted>: 209.7 MB
        Macintosh HD (disk0s2) / [Startup]: 499.25 GB (295.55 GB free)
        Recovery HD (disk0s3) <not mounted>: 650 MB
    MATSHITADVD-R   UJ-898
USB Information:
    Apple Internal Memory Card Reader
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. Built-in iSight
    Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Gatekeeper:
    Anywhere
Kernel Extensions:
    [not loaded]    com.cisco.cscotun (1.0) Support
    [kext loaded]    com.logmein.hamachi (1.0) Support
    [kext loaded]    org.virtualbox.kext.VBoxDrv (4.0.4) Support
    [not loaded]    org.virtualbox.kext.VBoxNetAdp (4.0.4) Support
    [not loaded]    org.virtualbox.kext.VBoxNetFlt (4.0.4) Support
    [kext loaded]    org.virtualbox.kext.VBoxUSB (4.0.4) Support
Startup Items:
    KeyAccess: Path: /Library/StartupItems/KeyAccess
    VirtualBox: Path: /Library/StartupItems/VirtualBox
Launch Daemons:
    [failed]    com.adobe.fpsaud.plist Support
    [loaded]    com.adobe.SwitchBoard.plist Support
    [running]    com.cisco.anyconnect.vpnagentd.plist Support
    [loaded]    com.google.keystone.daemon.plist Support
    [running]    com.logmein.hamachi.plist Support
    [running]    com.sassafras.KeyAccess.plist Support
    [loaded]    com.tunnelbear.mac.tbeard.plist Support
Launch Agents:
    [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [loaded]    com.cisco.anyconnect.gui.plist Support
    [loaded]    com.google.keystone.agent.plist Support
    [running]    com.logmein.hamachimb.plist Support
    [loaded]    com.sassafras.KeyAccess.plist Support
User Launch Agents:
    [loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [running]    com.spotify.webhelper.plist Support
    [not loaded]    org.virtualbox.vboxwebsrv.plist Support
User Login Items:
    GrowlHelperApp
    GrowlHelperApp
    iTunesHelper
    SuperDrive Update 2.1
    Google Drive
    Dropbox
    DaumLiveAgent
    KeyAccess
Internet Plug-ins:
    npCrossWebPlugin: Version: 1.0 - SDK 10.5 Support
    o1dbrowserplugin: Version: 5.3.1.18536 Support
    Google Earth Web Plug-in: Version: 6.1 Support
    Default Browser: Version: 537 - SDK 10.9
    Flip4Mac WMV Plugin: Version: 2.4.1.4 Support
    OfficeLiveBrowserPlugin: Version: 12.3.6 Support
    RealPlayer Plugin: Version: (null) Support
    AdobePDFViewerNPAPI: Version: 10.1.10 Support
    FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
    DivXBrowserPlugin: Version: 2.0 Support
    Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
    Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
    iPhotoPhotocast: Version: 7.0
    googletalkbrowserplugin: Version: 5.3.1.18536 Support
    QuickTime Plugin: Version: 7.7.3
    AdobePDFViewer: Version: 10.1.10 Support
    Veraport: Version: 1.1.0.2 - SDK 10.7 Support
    JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Audio Plug-ins:
    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
    AirPlay: Version: 2.0 - SDK 10.9
    AppleAVBAudio: Version: 203.2 - SDK 10.9
    iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
    Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
    DivX Support
    Flash Player Support
    Flip4Mac WMV Support
    Growl Support
    KeyAccess Support
    Symantec\nQuickMenu Support
Time Machine:
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
        Macintosh HD: Disk size: 464.96 GB Disk used: 189.71 GB
    Destinations:
        Data [Network] (Last used)
        Total size: 2
        Total number of backups: 30
        Oldest backup: 2012-08-12 07:49:57 +0000
        Last backup: 2014-05-05 04:48:48 +0000
        Size of backup disk: Excellent
            Backup size 2 > (Disk size 464.96 GB X 3)
    Time Machine details may not be accurate.
    All volumes being backed up may not be listed.
Top Processes by CPU:
         3%    WindowServer
         0%    fontd
         0%    PluginProcess
         0%    Google Drive
         0%    com.apple.WebKit.Networking
Top Processes by Memory:
    188 MB    com.apple.IconServicesAgent
    143 MB    Finder
    143 MB    mds_stores
    102 MB    Safari
    98 MB    WindowServer
Virtual Memory Information:
    53 MB    Free RAM
    1.55 GB    Active RAM
    1.50 GB    Inactive RAM
    787 MB    Wired RAM
    537 MB    Page-ins
    316 KB    Page-outs

You have so much junk, and I doubt that you know how to uninstall it.
It's up to you what you do, I know what I would do (but then I wouldn't stuff my Mac with junk in the first place)
Good luck.

Is it possible to remove "Revision" from standard check in

Hi,
Is it possible to remove or disable the revision text box in the standard check in screen. This number can be changed by the user each time the document is checked in. It can be changed to go backwards and use duplicated is the user changes it without giving an error i.e. 1 - 3 - 2 - 3. The documentation says "The revision increments automatically with each check-in of the content item, so generally, you should not change this value"
Is there a way to remove/disable this from the standard check-in to prevent people changing it.
Thanks

Kizume and Rhm Zanz it should be still there as that is what manages that specific feature.
In the top menu bar, where is says:  Finder File Edit View Go Windows Help
Click on the Go, and in the same time click the option key on your keyboard near the space bar. In that the drop down menu list the word Library will appear.
Click on Library and Finder will open, look for the Preferences folder. Within that folder which should be in alphabetical order look for the file named, com.apple.sharekit.recents.plist
Drag that file out of finder and unto your desktop. Close out the Finder window and close out all other your applications, including Safari, and reboot your Mac and once it turns on, reopen Safari and look at your share sheet. Any recents should be gone. That file named com.apple.sharekit.recents.plist will recreate itself on a clean slate in that folder. Should you encounter that you shared something again to a contact with Safari's share sheet, be sure to follow the same directions.
Cheers!

Is it possible to remove user interaction in a eventListener ?

Hi,
I am working on two scripts that both need to deal with the user interaction.
This following script works just fine. The only matter is that Indesign alerts me that the script prevented the UI dialog from opening.
What if I don't want any alert ?
#targetengine "newdialog"
Application.prototype.main = function(){
     //app.addEventListener ("beforeNew", preventMe, false);
     var myMenuAction = app.menuActions.item("$ID/Document...");
     myMenuAction.addEventListener ("beforeInvoke", preventMe, false)
function preventMe(myEvent){
     //alert(myEvent.cancelable);
     myEvent.stopPropagation();
     myEvent.preventDefault();
app.main();
I thought about userInteractionLevel but I tried to use it recently and I couldn't get it working. My intention was to get an automated update of my modified links when opening a file.
It's like
app.scriptPreferences.userInteractionLevel
couldn't be set once the script has been launched.
#targetengine "autolinkupdate"
main();
function main(){
     var myMenuAction = app.menuActions.item("$ID/kPMOpenDocTextKey");
     myMenuAction.addEventListener("beforeInvoke",removeInteraction,false);
     //app.addEventListener("beforeOpen",removeInteraction, false);
     app.addEventListener("afterOpen",updatelinks, false);
function updatelinks(myEvent){
     var doc=myEvent.parent;
     var lk = doc.links;
     for(var i=0; i<lk.length; i++){
          try{
               lk[i].update();
          catch(e){}
     app.scriptPreferences.userInteractionLevel = UserInteractionLevels.INTERACT_WITH_ALL;
function removeInteraction(myEvent){
     app.scriptPreferences.userInteractionLevel = UserInteractionLevels.NEVER_INTERACT;
So my question is : Is it possible to remove user interaction in a eventListener ?
Thanks,
Loic

Assuiming NHTEST is a database link to the remote database connecting with SCOTT, use user_Tab_cols@NHTESTNicolas.

Adding or removing any functionalities in oracle convergence 2

If i want to add any new functionaliy or want to remove any existing functionality than in which folder/files i have to make changes under iwc_static folder.
Suppose i want to add any new functionality under mail section, what all steps need to follow and on which all files.
All this thing is it possible in convergence 2.

Note that early access to Convergence 2 Patch 1, which enables customization support in Convergence 2, is now available by logging a Service Request with Oracle Support.
In case you are interested, some quick links to the Convergence docs and knowledge articles, as well as information on patches, can now be found in the recently published "Master Note for Oracle Communications Convergence (Doc ID 1298122.1)"
https://support.oracle.com/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(bmDocID=1298122.1&from=BOOKMARK&bmDocDsrc=KB&viewingMode=1143))
Edited by: user12608224 on Feb 28, 2011 10:02 AM
Edited by: user12608224 on Feb 28, 2011 10:14 AM

Is it possible to use the built-in Ethernet port in the RE1000 to Minimize Decreasing throughput

Kindly
Is it possible to use the built-in Fast Ethernet (10/100 Mbps) port to extend the network with an Ethernet cable without placing the extender in an area where you still have at signal ?
because i dont want to decrease the wireless through-put by 50 % .
I would like to Expand the network network by running an Ethernet cable from an RE4200(Basement floor ) router to the end of the RE1000 built-in Fast Ethernet (10/100 Mbps) port in the second floor..

The Linksys RE1000 Wireless-N Range Extender includes a built-in Fast Ethernet (10/100 Mbps) port, which works as a wireless bridge to instantly connect any wired Ethernet device to your network. To ensure the proper configuration of the range extender, you need to know the wireless settings of your router or access point. These settings are:
• SSID
• Wireless Channel
• Wireless Security and Network Key
Here is the link for manually configuring a range extender: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=206954591ff54e36884bb4636fcfd3d9_Manually_configur...
Once your range extender gets sync with your router you can make the RE1000 as a Bridge...

Captivate 4 Possible to remove borders/padding around published project?

Greetings,
I am working with Captivate 4 and publishing to a SCORM 1.2 compliant LMS. I would like to publish a project without having the borders/padding surrounding the project files. Is this possible? If so, where would I look to find instructions to do this?
When published in our LMS, the LMS generates a window of a fixed sixe. This is set in the LMS itself and can be changed in the LMS. The goal being to remove browser controls and scroll bars from the user’s point of view when they launch a lesson showing only the lesson.
In previous versions of Captivate (2 and 3) I was able modify the SCORM.htm file in such a way that I could remove any padding around published project files. The SCORM.htm file used a table to center the Captivate SWF files in the users screen. I could edit this file and use absolute positioning to eliminate (the table tags) “dead space” around a project swf file.
Doing this in Captivate 4 (editing Custom.htm and Default.htm) does not seem to have the same effect. (In fact it seems to have no affect (good or bad) at all.
Has anyone had any success in doing this?
Also, has anyone used the new Captivate 5 yet? Does it have the same presentation limitations as Captivate 4?
Thank you,
TPK

TPK,
This worked perfect. The only problem that I have is that it still leaves a small ribbon of white at the top and the bottom of the window. Any idea how to remove that?
Here is the current HTM text


<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>workers_comp</title>
<script src="standard.js" type="text/javascript"></script>
<script src="SCORM_support/scorm_support.js"></script>
<script type="text/javascript" language="JavaScript">
   // set document.domain property here, if it works for your environment/SCORM implementation
   // document.domain="";
   var g_intAPIType = 0;
   // Hook for Internet Explorer
   if ((navigator.appName && navigator.appName.indexOf("Microsoft") != -1 && navigator.userAgent.indexOf("Windows") != -1 && navigator.userAgent.indexOf("Windows 3.1") == -1) || g_intAPIType == -1)
    g_intAPIType = 0;
    document.write('<script language=\"VBScript\"\>\n');
    document.write('On Error Resume Next\n');
    document.write('Sub Captivate_FSCommand(ByVal command, ByVal args)\n');
    document.write('Call Captivate_DoFSCommand(command, args)\n');
    document.write('End Sub\n');
    document.write('</script\>\n');
    document.write('<script language=\"VBScript\"\>\n');
    document.write('On Error Resume Next\n');
    document.write('Sub Captivate_DoExternalInterface(ByVal command, ByVal parameter, ByVal value, ByVal variable)\n');
    document.write('Call Captivate_DoExternalInterface(command, parameter, value, variable)\n');
    document.write('End Sub\n');
    document.write('</script\>\n');
   } else {
    g_intAPIType = 1;
   var strURLFile = "Enhanced_Authorization_Integration.swf";   // Name of the flash file
   var intIntervalSecs = 1;    // Number of seconds to wait for SCORM API to load
   var g_intAPIOrder = 0;     // Way to search for API object (0 - starts with bottom up; 1 - starts top down)
   var strURLBase = "";
   var strURLParams = "";
   var strURLFull = document.location + "";
   var intTemp = strURLFull.indexOf("#");
   if (intTemp == -1)
    intTemp = strURLFull.indexOf("?");
   if (intTemp > 0)
    strURLParams = strURLFull.substring(intTemp + 1, strURLFull.length);
   var strTemp = location.protocol.toUpperCase();
   if (strTemp.indexOf("FILE") == -1)
     var intTemp = location.pathname.lastIndexOf("/");
   else
     var intTemp = location.pathname.lastIndexOf("\\");
   if (intTemp != -1)
     strURLBase = location.protocol + "//" + location.host + location.pathname.substring(0, intTemp + 1);
   else
     strURLBase = location.protocol + "//" + location.host + location.pathname;
   strURLParams = (strURLParams==unescape(strURLParams)?escape(strURLParams):strURLParams);
   strURLParams = (strURLParams==""?"":"?") + strURLParams;
   function Finish()
    if ((isAPI()) && (g_bFinishDone == false))
     (g_zAPIVersion=="0.2"?g_objAPI.LMSCommit(""):g_objAPI.Commit(""));
     g_bFinishDone = (g_zAPIVersion=="0.2"?g_objAPI.LMSFinish("") == "true":g_objAPI.Terminate("") == "true");
    return (g_bFinishDone + "" ) // Force type to string
   if(g_intAPIType==0)
    // Detect Internet Explorer
    var g_bIsInternetExplorer = navigator.appName.indexOf("Microsoft") != -1;
    // Handle fscommand messages from a Flash movie
    function Captivate_DoFSCommand(command, args)
     var CaptivateObj = g_bIsInternetExplorer ? Captivate : document.Captivate;
     var strFSArgs = new String(args);
     var strFSCmd = new String(command);
     var strErr = "true";
     var strFSArg1, strFSArg2, strFSArg3
     var intFSDelimiter = strFSArgs.indexOf("|");
     if (intFSDelimiter > -1)
      strFSArg1 = strFSArgs.substr(0, intFSDelimiter); // Name of data element to get from API
      var strFSTemp = strFSArgs.substr(intFSDelimiter + 1);
      intFSDelimiter = strFSTemp.indexOf("|");
      if(intFSDelimiter > -1)
       strFSArg2 = strFSTemp.substr(0, intFSDelimiter); // Value
       strFSArg3 = strFSTemp.substr(intFSDelimiter + 1); // Variable
      } else {
       strFSArg2 = strFSTemp;
     } else {
      strFSArg1 = strFSArgs;
     // do nothing, if SCORM API is not available
     if (!isAPI()) return;
     if ( strFSCmd == "LMSInitialize" || strFSCmd=="Initialize")
      CaptivateObj.SetVariable(strFSArg3, eval('g_objAPI.' + strFSCmd + '(\"\");'));
     } else if ( strFSCmd == "LMSSetValue" || strFSCmd=="SetValue") {
      strErr = eval('g_objAPI.' + strFSCmd + '(\"' + strFSArg1 + '\",\"' + strFSArg2 + '\");');
      CaptivateObj.SetVariable(strFSArg3, strErr);
     } else if ( strFSCmd == "LMSFinish" || strFSCmd=="Terminate") {
      g_bFinishDone = eval('g_objAPI.' + strFSCmd + '(\"\");')
      strErr = g_bFinishDone;
      CaptivateObj.SetVariable(strFSArg3, g_bFinishDone);
     } else if ( strFSCmd == "LMSCommit" || strFSCmd=="Commit") {
      strErr = eval('g_objAPI.' + strFSCmd + '(\"\");');
      CaptivateObj.SetVariable(strFSArg3, strErr);
     } else if ((strFSArg2) && (strFSArg2.length > 0)) {
      if(strFSCmd=="LMSGetLastError")
       strErr = eval('g_objAPI.' + strFSCmd + '();')
       CaptivateObj.SetVariable(strFSArg3, strErr);
      } else {
       strErr = eval('g_objAPI.' + strFSCmd + '(\"' + strFSArg1 + '\");')
       CaptivateObj.SetVariable(strFSArg3, strErr);
     } else if (strFSCmd.substring(0,3) == "LMSGet") {
      strErr = "-2: No Flash variable specified"
     return strErr;
    function Captivate_DoExternalInterface(command, parameter, value, variable)
     var CaptivateObj = g_bIsInternetExplorer ? Captivate : document.Captivate;
     //alert("command " + command + " ;parameter " +parameter+ " ;value " + value + " ;variable " + variable );
     //var strFSArgs = new String(args);
     var strFSCmd = new String(command);
     var strErr = "true";
     var strFSArg1, strFSArg2, strFSArg3;
     strFSArg1 = parameter;
     strFSArg2 = value;
     strFSArg3 = variable;
     /*var intFSDelimiter = strFSArgs.indexOf("|");
     if (intFSDelimiter > -1)
      strFSArg1 = strFSArgs.substr(0, intFSDelimiter); // Name of data element to get from API
      var strFSTemp = strFSArgs.substr(intFSDelimiter + 1);
      intFSDelimiter = strFSTemp.indexOf("|");
      if(intFSDelimiter > -1)
       strFSArg2 = strFSTemp.substr(0, intFSDelimiter); // Value
       strFSArg3 = strFSTemp.substr(intFSDelimiter + 1); // Variable
      } else {
       strFSArg2 = strFSTemp;
     } else {
      strFSArg1 = strFSArgs;
     // do nothing, if SCORM API is not available
     if (!isAPI()) return;
     if ( strFSCmd == "LMSInitialize" || strFSCmd=="Initialize")
      //CaptivateObj.SetVariable(strFSArg3, eval('g_objAPI.' + strFSCmd + '(\"\");'));
      CaptivateObj.SetScormVariable(strFSArg3,eval('g_objAPI.' + strFSCmd + '(\"\");'));
     } else if ( strFSCmd == "LMSSetValue" || strFSCmd=="SetValue") {
      strErr = eval('g_objAPI.' + strFSCmd + '(\"' + strFSArg1 + '\",\"' + strFSArg2 + '\");');
      //CaptivateObj.SetVariable(strFSArg3, strErr);
      CaptivateObj.SetScormVariable(strFSArg3, strErr);
     } else if ( strFSCmd == "LMSFinish" || strFSCmd=="Terminate") {
      g_bFinishDone = eval('g_objAPI.' + strFSCmd + '(\"\");')
      strErr = g_bFinishDone;
      //CaptivateObj.SetVariable(strFSArg3, g_bFinishDone);
      CaptivateObj.SetScormVariable(strFSArg3, g_bFinishDone);
     } else if ( strFSCmd == "LMSCommit" || strFSCmd=="Commit") {
      strErr = eval('g_objAPI.' + strFSCmd + '(\"\");');
      //CaptivateObj.SetVariable(strFSArg3, strErr);
      CaptivateObj.SetScormVariable(strFSArg3, strErr);
     } else if ((strFSArg2) && (strFSArg2.length > 0)) {
      if(strFSCmd=="LMSGetLastError")
       strErr = eval('g_objAPI.' + strFSCmd + '();')
       //CaptivateObj.SetVariable(strFSArg3, strErr);
       CaptivateObj.SetScormVariable(strFSArg3, strErr);
      } else {
       strErr = eval('g_objAPI.' + strFSCmd + '(\"' + strFSArg1 + '\");')
       //CaptivateObj.SetVariable(strFSArg3, strErr);
       CaptivateObj.SetScormVariable(strFSArg3, strErr);
     } else if (strFSCmd.substring(0,3) == "LMSGet") {
      strErr = "-2: No Flash variable specified"
     return strErr;
</script>
</head>
<body bgcolor="#F1F4F5" onunload="Finish();">
     
<div id="CaptivateContent" style="position:absolute; top: 0px; left: 0px;">
</div>
<layer id="NS_dynamic" name="NS_dynamic">
<script type="text/javascript">
    var tempso = new SWFObject("SCORM_support/scorm_support.swf", "scorm_support", "2", "2", "8", "#CCCCCC");
    tempso .addParam("quality", "high");
    tempso .addParam("id", "scorm_support");
    tempso .addParam("bgcolor","#FFFFFF");
    tempso .addParam("menu", "false");
    tempso .addParam("movie", "SCORM_support/scorm_support.swf");
    tempso .setAttribute("redirectUrl", "http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash");
</script>
<noscript>
   <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
    codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,29,0"
    width="2" height="2" id="scorm_support" align="">
    <param name=movie value="SCORM_support/scorm_support.swf"> <param name=quality value=high> <param name=menu value=false> <param name=bgcolor value=#FFFFFF>
    <embed src="SCORM_support/scorm_support.swf" quality=high bgcolor=#FFFFFF width="2" height="2" name="scorm_support" align=""
     type="application/x-shockwave-flash" pluginspage="http://www.adobe.com/go/getflashplayer">
    </embed>
   </object>
</noscript>
</layer>
<script type="text/javascript" language="JavaScript">
   var timeCurrent_int = new Date().getTime();
   var timeLimit_int = new Date().getTime() + (intIntervalSecs * 1000);
   // This simply loops for a set period of time, waiting for the API to
   // load and/or be found. A better solution would be to use setInterval
   // and on the timeout, redirect or load the resulting Captivate file.
   while((g_objAPI == null) && timeCurrent_int < timeLimit_int)
    g_objAPI = getAPI(g_intAPIOrder);
    timeCurrent_int = new Date().getTime();
   if(g_objAPI != null)
    strURLParams += (strURLParams==""?"?":"&") + "SCORM_API=" + g_zAPIVersion + "&SCORM_TYPE=" + g_intAPIType;
   //document.write('<center>');
   //document.write('<table border="0" cellpadding="7" cellspacing="7"> \n');
   //document.write(' <tr> \n');
   //document.write('    <td align="middle">');
   document.write('<div id="flash" style="position:absolute; top:0px; left:0px;"> \n');
   var so = new SWFObject(strURLFile + strURLParams, "Captivate", "992", "625", "9", "#CCCCCC");
    so.addParam("quality", "high");
    so.addParam("name", "Captivate");
    so.addParam("id", "Captivate");
    so.addParam("wmode", "window");
    so.addParam("bgcolor","#FFFFFF");
    so.addParam("menu", "false");
    so.addVariable("variable1", "value1");
    so.setAttribute("redirectUrl", "http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=S hockwaveFlash");
    so.write("CaptivateContent");
   document.write(' </div> \n');
   //document.write('</td> \n');
   //document.write(' </tr> \n');
   //document.write('</table> \n');
   //document.write('</center>');
</script>
</center>
</body>
</html>

Is it possible to rewrite any applet to aplications ?

I am wondering, is it possible to rewrite any applet to aplications ?
dows everything works ? then ?
look at this applet and please rewrite it to aplication if it works, I have tried but some sound did not work. and lots of other thigs went wrong.
import java.awt.*;
import java.util.*;
import java.applet.*;
public class PongBall
     // Variablen
     private int x_pos;               // x - Position des Balles
     private int y_pos;               // y - Position des Balles
     private int x_speed;          // Geschwindigkeit in x - Richtung
     private int y_speed;          // Geschwindigkeit in y - Richtung
     // Positionen
     private int ball_top;          // Obergrenze des Balles
     private int ball_bottom;     // Untergrenze des Balles
     private int ball_left;          // Linke Grenze des Balles
     private int ball_right;          // Rechte Grenze des Balles
     private int comp_top;          // Oberkante des Computerpaddels
     private int comp_bottom;     // Unterkante des Computerpaddels
     private int comp_right;          // Rechte Seite des Computerpaddels
     // Spielfeld (Radius des Balles mit eingerechnet)
     private static final int right_out = 390;
     private static final int left_out = 10;
     private static final int down_out =290;
     private static final int up_out = 10;
     private static final int radius = 10;               // Ballradius
     public PongBall (int x_pos, int y_pos)
          this.x_pos = x_pos;
          this.y_pos = y_pos;
          x_speed = 3;
          y_speed = 3;
     public void move ()
          x_pos += x_speed;
          y_pos += y_speed;
          isBallOut();
     public void isBallOut ()
          // Ball bewegt sich nach links
          if (x_speed < 0)
               if (x_pos < left_out)
                    // Geschwindigkeit umdrehen
                    x_speed = - x_speed;
          // Ball bewegt sich nach rechts
          else if (x_speed > 0)
               if (x_pos > right_out)
                    // Geschwindigkeit umdrehen
                    x_speed = - x_speed;
          // Ball bewegt sich nach oben
          if (y_speed < 0)
               if (y_pos < up_out)
                    y_speed = - y_speed;
          // Ball bewegt sich nach unten
          else if (y_speed > 0)
               if (y_pos > down_out)
                    y_speed = - y_speed;
     public void testForCollisionComputer (ComputerKI computer)
          // Initialisierung der Ballpositionen
          ball_top = y_pos - radius;
          ball_bottom = y_pos + radius;
          ball_left = x_pos - radius;
          ball_right = x_pos + radius;
          // Initialisierung der momentanen Positionen des Paddels
          comp_top = computer.getYPos();
          comp_bottom = computer.getYPos() + computer.getYSize();
          comp_right = computer.getXPos() + computer.getXSize();
          // Ist die Y - Position des Balles zwischen den Paddelpositionen?
          if ((ball_top >= comp_top - radius) && (ball_bottom <= comp_bottom + radius))
               // Ist Paddel in der N�he?
               if (ball_left <= comp_right)
                    // Normales Bouncen
                    x_speed = - x_speed;
     public int getXSpeed ()
          return x_speed;
     public int getYPos ()
          return y_pos;
     public void paint (Graphics g)
          g.setColor (Color.red);
          g.fillOval (x_pos - radius, y_pos - radius, 2 * radius, 2 * radius);
import java.awt.*;
import java.util.*;
import java.applet.*;
import java.net.*;
public class Main extends Applet implements Runnable
     // Variablen
     // Thread
     Thread thread;
     // Ball
     PongBall ball;
     // Computerpaddel
     ComputerKI computer;
     // Doppelpufferung
     private Image dbImage;
     private Graphics dbg;
     public void init(){
          setBackground (Color.black);
          ball = new PongBall (200,200);
          computer = new ComputerKI (200, ball);
     public void start(){
          thread = new Thread (this);
          thread.start();
     public void stop(){
          thread.stop();
     public void run(){
          // Erniedrigen der ThreadPriority um zeichnen zu erleichtern
          Thread.currentThread().setPriority(Thread.MIN_PRIORITY);
          while (true)
               // Neumalen des Fensters
               repaint();
               ball.move();
               computer.move();
               if (ball.getXSpeed() < 0){
                    ball.testForCollisionComputer(computer);
               try
                    // Stoppen des Threads f�r 10 Millisekunden
                    Thread.sleep (10);
               catch (InterruptedException ex)
                    break;
               // Zur�cksetzen der ThreadPriority auf Maximalwert
               Thread.currentThread().setPriority(Thread.MAX_PRIORITY);
     public void paint(Graphics g){
          ball.paint(g);
          computer.paint (g);
     /** Update - Methode, Realisierung der Doppelpufferung zur Reduzierung des Bildschirmflackerns */
     public void update (Graphics g)
          // Initialisierung des DoubleBuffers
          if (dbImage == null)
               dbImage = createImage (this.getSize().width, this.getSize().height);
               dbg = dbImage.getGraphics ();
          // Bildschirm im Hintergrund l�schen
          dbg.setColor (getBackground ());
          dbg.fillRect (0, 0, this.getSize().width, this.getSize().height);
          // Auf gel�schten Hintergrund Vordergrund zeichnen
          dbg.setColor (getForeground());
          paint (dbg);
          // Nun fertig gezeichnetes Bild Offscreen auf dem richtigen Bildschirm anzeigen
          g.drawImage (dbImage, 0, 0, this);
import java.awt.*;
import java.util.*;
import java.applet.*;
class ComputerKI
     /** Diese Klasse Implementiert die Bewegungen des Computers und zeichnet auch die
     Computerpaddel */
     // Deklaration der Variablen
     private int y_pos;                         // y - Position des Paddels
     private int y_speed;                    // Geschwindigkeit in y - Richtung
     private int real_y_pos;                    // Speichert die wirkliche Paddelposition (Mitte)
     // Konstanten
     private static final int x_pos = 15;     // x - Position des Paddels
     private static final int size_x = 10;     // Gr��e des Paddels in x - Richtung
     private static final int size_y = 50;     // Gr��e des Paddels in y - Richtung
     // Ball
     private static PongBall ball;
     // Construktor
     public ComputerKI (int y_pos, PongBall ball)
          this.y_pos = y_pos;
          y_speed = 4;
          this.ball = ball;
     /** Diese Methode bewegt das Paddel */
     public void move ()
          // Mitte des Paddels
          real_y_pos = y_pos + (size_y / 2);
          // Wenn sich Ball von Paddel wegbewegt, werden die Paddel in die Mitte zur�ckbewegt
          if (ball.getXSpeed() > 0)
               // Paddel oberhalb der Mitte
               if (real_y_pos < 148)
                    y_pos += y_speed;
               // Paddel unterhalb der Mitte
               else if (real_y_pos > 152)
                    y_pos -= y_speed;
          else if (ball.getXSpeed() < 0)
               // Solange Paddel nicht auf H�he des Balles ist wird es bewegt
               if ( real_y_pos != ball.getYPos())
                    // Ball oberhalb von Paddel
                    if (ball.getYPos() < real_y_pos)
                         y_pos -= y_speed;
                    // Ball unterhalb von Paddel
                    else if (ball.getYPos() > real_y_pos)
                         y_pos += y_speed;
     public int getXPos()
          return x_pos;
     public int getYPos()
          return y_pos;
     public int getXSize()
          return size_x;
     public int getYSize()
          return size_y;
     /** Diese Methode zeichnet das Paddel */
     public void paint (Graphics g)
          g.setColor (Color.blue);
          g.fillRect (x_pos, y_pos, size_x, size_y);
}

I tryed .. but couldent make it...
there where not suck thing as MyStub and MyApplet..
I know I sould replace it with something else.. but I
did not know WHAT !!
please help.
MyStub stub = new MyStub();
Applet a = new MyApplet();Ok this will be a bit longer post, but it contains fully functional example, simply copy-paste 200 lines of code to single .java file in your favourite IDE and explore it a bit.
Please take note of that this is only example. It's design have several flaws:
- user interface is tightly coupled wih applet stub/context. in real world application IMHO applet stub/context belong to application model (where 'application' means "MyAppletContainer") whereas JDesktop and JInternalFrame are part of view (from MVC pattern).
- applet lifecycle is implmeneted very carelessly. in this example applet is initialzied and started uppon adding to JDesktop and stoped when JInternalFrame is removed from desktop
- codeBase and documentBase properties of AppletStub are not set. see javadoc pages mentioned few lines below, for more information about this two properties.
- some methods in applet context throws UnsupportedOperationException (e.g. getAudioClip) because they are beyond scope of simple example or not really necessary (e.g. mentioned getAudioClip). Another approach is return null instead or leave empty body for methods with void return type.
Before studying sample code you should take a look on applet stub/context declaration in java api. visit url: http://java.sun.com/j2se/1.5.0/docs/api/java/applet/AppletStub.html and http://java.sun.com/j2se/1.5.0/docs/api/java/applet/AppletContext.html
Because this sample is nothing else than briefly scratched one possible implementation of these two interfaces.
Sample:
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
import java.beans.*;
import java.io.*;
import java.net.URL;
import java.util.*;
import javax.imageio.ImageIO;
import javax.swing.*;
public class Main {
    public static void main(String[] args) throws Exception {
        final MyContext context = new MyContext();
        SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                context.setVisible(true);
    /** Create sample applet */
    public static Applet createApplet() {
        JApplet applet = new JApplet() {
            public void init() {
                showStatus("Another applet initialized");
        applet.add(new JLabel("I am applet"));
        return applet;
/** Single applet stub */
class MyStub extends JInternalFrame implements AppletStub {
    /** Create new applet stub*/
    public MyStub(Applet applet, MyContext context) {
        // Setup applet
        this.applet = applet;
        this.context = context;
        applet.setStub(this);
        add(applet);
    /** Owned applet */
    Applet applet;
    /** Context who own this stub */
    MyContext context;
    /** Applet document base */
    URL documentBase;
    /** Applet code base */
    URL codeBase;
    /** Applet parameters */
    final Map<String, String> param =
            new HashMap<String, String>();
    /** ##AppletStub##
     * Applet is active whenever frame
     * is selected for example.
    public boolean isActive() {
        return ((JInternalFrame)this).isSelected();
    /** ##AppletStub## */
    public URL getDocumentBase() {
        return documentBase;
    /** ##AppletStub## */
    public URL getCodeBase() {
        return codeBase;
    /** ##AppletStub## */
    public AppletContext getAppletContext() {
        return context;
    /** ##AppletStub## */
    public void appletResize(int width, int height) {
        // allow resize as needed
        setSize(width,height);
    /**##AppletStub## */
    public String getParameter(String name) {
        return param.get(name);
/** Main application frame and applet context */
class MyContext extends JFrame implements AppletContext {
    /** Named InputStreams */
    private Map<String,InputStream> streams =
            new HashMap<String, InputStream>();
    /** All applet stubs */
    private Map<String, MyStub> applets =
            new HashMap<String, MyStub>();
    /** Applets as enumeration */
    private Vector<Applet> appletsEnum =
            new Vector<Applet>();
    /** Ui applet container */
    private JDesktopPane jAppletPane =
            new JDesktopPane();
    /** Status line */
    private JLabel jAppletStatus =
            new JLabel("Add first applet");
    /** Create context */
    public MyContext() throws PropertyVetoException {
        // Create ui
        setSize(600,400);
        setDefaultCloseOperation(EXIT_ON_CLOSE);
        setLayout(new BorderLayout());
        add(jAppletPane, BorderLayout.CENTER);
        add(jAppletStatus, BorderLayout.SOUTH);
        add(new JButton(new AbstractAction("Add applet") {
            public void actionPerformed(ActionEvent e) {
                doAddApplet();
        }), BorderLayout.NORTH);
        // Very simple applet lifecycle implementation
        // Applet is initialized and started when added and
        // stopped and destroyed when removed from content pane
        jAppletPane.addContainerListener( new ContainerListener() {
            public void componentAdded(ContainerEvent e) {
                Component c = e.getChild();
                if (!(c instanceof MyStub))
                    return ;
                Applet applet = ((MyStub)c).applet;
                applet.init();
                applet.start();
            public void componentRemoved(ContainerEvent e) {
                Component c = e.getChild();
                if (!(c instanceof MyStub))
                    return ;
                Applet applet = ((MyStub)c).applet;
                applet.stop();
                applet.destroy();
    /** Add applet action body */
    private void doAddApplet() {
        // Create some arbitrary applet and name
        Applet applet = Main.createApplet();
        String appletName = "Applet "+System.currentTimeMillis();
        // Add applet and its stub to this container
        MyStub stub = new MyStub(applet, this);
        applets.put(appletName, stub);
        appletsEnum.add(applet);
        // Add to ui
        jAppletPane.add(stub);
        stub.setSize(400,300);
        stub.setVisible(true);
    /** ##AppletContext## */
    public Iterator<String> getStreamKeys() {
        return streams.keySet().iterator();
    /** ##AppletContext## */
    public void setStream(String key, InputStream stream)
    throws IOException {
        streams.put(key, stream);
    /** ##AppletContext## */
    public InputStream getStream(String key) {
        return streams.get(key);
    /** ##AppletContext## */
    public Enumeration<Applet> getApplets() {
        return appletsEnum.elements();
    /** ##AppletContext## */
    public Applet getApplet(String name) {
        MyStub stub = applets.get(name);
        return stub == null? null: stub.applet;
    /** ##AppletContext## */
    public Image getImage(URL url) {
        try {
            return ImageIO.read(url);
        } catch (IOException ex) {
            JOptionPane.showMessageDialog(this,
                    "IOException: "+ex.getMessage());
            return null;
    /** ##AppletContext## */
    public AudioClip getAudioClip(URL url) {
        throw new UnsupportedOperationException();
    /** ##AppletContext## */
    public void showStatus(String status) {
        jAppletStatus.setText(status);
    /** ##AppletContext## */
    public void showDocument(URL url, String target) {
        throw new UnsupportedOperationException();
    /** ##AppletContext## */
    public void showDocument(URL url) {
        showDocument(url, null);
}Hope this will help a bit.
~~
Adam
Message was edited by:
a3cchan
When I've modified Main.createApplet() to create Your Pong applet I was able to create and run your applet in my simple container with just little glitches (mostly related to my simplistic implementation of ui).
If you wish to 'convert' applet to swing application, You don't have use JDesktop. Add single applet to the frame instead. It should be quite simple from given example.

When U2 launched their latest album it was downloaded to all iTunes users free of charge. It does not seem to be possible to delete any or all of these tracks. Can anybody tell me how to delete these tracks?

When U2 launched their latest album it was downloaded to all iTunes users free of charge. It does not seem to be possible to delete any or all of these tracks. Can anybody tell me how to delete these tracks?

Hi SJHocking,
Welcome to the Apple Support Communities!
If you would like to remove the iTunes gift album “Songs of Innocence”, please follow the instructions outlined in the attached article.
Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases - Apple Support
Cheers,
Joe

Intel Mac Mini: possible to remove Airport card?

Is it possible to remove temporarly the airport extreme card from an Intel Mac Mini to use the card in another Mac having a free Airport Extreme slot?
That is, Intel Mac Minis have a "standard" airport card already mounted inside, or the built-in airport connectivity is supplied by a specific el.circuit with no Airport card at all?!
Mac mini + iBook Mac OS X (10.4.7)

The AirPort Extreme card in the Mac mini is a "standard" card, not special circuitry on the Logic board...so, yes, it would be possible to remove & replace it.

Is it still possible to remove pauses between tracks when ripping a CD?

In earlier versions of iTunes, it was possible to remove pauses between tracks. Many classical CDs have long sections subdivided into separate tracks, yet those sections are meant to be heard without pauses. When a CD with those separate tracks gets ripped, there is a brief pause before the next track starts. Is it still possible to remove those pauses?

Oops. I found the answer to this question after digging for about an hour.
Yes, it still can rip without pauses.
Now my issue is how to join (without pauses) music that ends on one CD and continues (without pauses) onto a second CD.
Any know of any software that does that with MP3s?

I have an application in my Firefox Options which I can't remove any help would be great

I have a download torrent called Bitlord which I have removed through my control panel - but it appears it is still there in my Options Applications which I can't removed - any help would be great

Hello liz1411, check also if you have something related to Bitlord (like toolbars) in Firefox Extensions and delete it, go from Firefox button(the orange button at the right top) > Add-ons > Extensions.
thank you

Is it possible to remove any built in columns?

Similar Messages

Maybe you are looking for