Is it possible to remove effects recorded in Apple loops?

Hi there,
I'm using a piano loop Classic Rock Piano09 which is blue and I want to take off the delay they've put on it.
I'm guessing because it's a 'blue' loop then I can't, but am hoping that I can somehow convert it to midi notes or maybe even a notated score that I can then put in any of the software instruments like a piano with no effects.
Annoying that you don't have the option to take effects but I suppose that adds a lot more complexity.
Thanks for your help.

if there isn't a delay plugin being used then no, you cant remove the delay because it is recorded along with the sound as part of the audio file..
That would akin to unboiling an egg....... which normally is impossible unless...
http://www.livescience.com/49610-scientists-unboil-egg.html

Similar Messages

  • Removal of record from Cube

    Hi all -
    My group is working in BW 3.5 and have loaded an infocube.  Is it possible to remove one record from the cube without reloading everything?  We need the entire record gone, not just a delta to reverse it.  I should mention that this should be an automated process and not a quick manual correction.
    Any ideas?
    Thanks for your help!
    Jeff

    Hi Jeff,
    To do this from the cube (manually) please see: 
    http://help.sap.com/saphelp_nw04/helpdata/en/4e/b71038cba6a169e10000009b38f8cf/content.htm
    Using the DELETE_FACTS, you can do the same as above, but the system will generate a program. The program can be made a part of the process chain, thus automating this job. But you need to see how 'variable' the selections are and if they can be incorporated into the program...if you need to delete just one record, then I guess you need to be extremely careful and specific with the deletion selections.
    Hope this helps...

  • Remove effect pluginn from final cut pro x

    Is it possible to remove an installed effect (plugin FXfactory) from FinalCutPro X?

    I probably should have noted that the above procedure *disables* the plugin, but doesn't delete it. You can reenable it later in the obvious way if you want to.

  • Loacate and remove duplicate records in infocube.

    Hi!!
    we have found the infocube 0PUR_C01 contians duplicate records for the month april 2008, approx 1.5lac records are extracted to this infocube, similar situations may be occuring in the subsequent months.
    How do I locate these records and remove them for the infocube?
    How do I ensure that duplicate records are not extracted in the infocube?
    All answers/ links are welcome!!
    Yours Truly
    K Sengupto

    First :
    1. How do I locate duplicate records in an Infocube? other than down load all the records in an excel file and use excel funtionality to locate duplicate records.
    This is not possible since a duplicate record would not exist - the records are sent to a cube with a + and - sign to accordingly summarize data.
    You search for duplicate data would become that much troublesome.
    If you have a DSO to load it from - delete data for that month and reload if possible this would be quicker and cleaner as opposed to removing duplicate records.
    If you had
    ABC|100 in your DSO and it got doubled
    it would be
    ABC|+100
    ABC|+100
    against different requests in the cube - and added to this ill be your correct deltas also.

  • Is it possible to remove the submit form button that's automatically created when you distribute a form?

    I have created a form for my boss and distributed it. She doesn't want the submit form button to appear as people don't need to submit the form to anyone, just fill it in and keep a copy. I can't figure out how to remove this button. It's not one I've created, it's the one that it automatically generates when you don't have a submit button in your form. Is it possible to remove this button or do we just have to live with it? I am using Adobe Acrobat X Pro.
    Thanks

    You can have more control on the email subject/ to and CC Email address, if you use a regular button and place the code in the click event.
    Refer to the attached sample below.
    https://acrobat.com/#d=HouRLov3lOntSbqAfsr5Hg
    Thanks
    Srini

  • Is it possible to remove my hard drive from the Macbook and install it in a new Macbook Pro?

    I currently have a 2009 Macbook and am wanting to upgrade to a new Macbook Pro.  I have upgraded my hard drive in the macbook to a 500gb and have a duel boot with Windows 7 installed with Boot Camp along with other software that I do not want to lose.  Is it possible to remove my hard drive from the Macbook and install it in a new Macbook Pro?

    A much better solution is to hook your two Mac together and the first time you start the new Mac and it asks if you wish to recover data from another Mac, answer yes. This will invoke Setup Assitant which will do the job for you but intelligently.
    I know because I just used Setup Assitant. It worked like  a charm.
    Allan

  • .   Is it possible to create condition record in both CRM as well as in R/3

    hi,
    .   Is it possible to create condition record in both CRM as well as in R/3?  Explain in more details.
    Regards,
    babu

    Hi Babu,
    No. You cannot create condition records in CRM when back end is R/3.
    Condition records should be created in R/3 and replicated to CRM.
    You cannot extend condition records in CRM.
    Reward the Points.
    Thanks,
    Srini.

  • Is it possible to remove yellow text background in the entire document?

    I have the same problem as the one that is mentioned here:http://forums.adobe.com/message/1155089 In my case the yellow background is already in the pdf-file which was created with a virtual pdf printer and then manipulated with another pdf-editor.  I noticed accidentally that it is possible to remove the yellow background in Acrobat Pro as if I'd edit an object. Getting rid of it on each page by hand would be a daunting task. Is it possible to do this somehow with the entire document? All help would be much appreciated.
    cheers
    Btw: The yellowish background does not appear in other pdf viewers.

    I'll try to describe the process but the exact numbers will depend on your document - as I said earlier when I ran a test of your file I got 3.4%, but you may not.
    Your file has a mixture of color spaces (CMYK/RGB/etc.) and so you must first run the Convert Colors tool from the Print Production Panel to get everything into a consistent space, or Preflight will choke. Run the default profile to convert to the SWOP v2 profile.
    Open the Output Preview tool from the Print production Panel and hover over one of the yellow areas, write down the percentage of yellow. Hopefully nothing else in the document will have the same percentage.
    Now open Preflight from the Print Production Panel, switch to the Single Checks tab.
    Open the Options menu, choose "Create new Preflight Check".
    Name it "yellow boxes" and apply it to "Page contents" and "Current file".
    Select the Colors group and pick "object uses Yellow with a percentage of..." - press ADD.
    Configure it with "Equal to" and your percentage (no % sign)
    Click OK, then switch to the Single Fixups tab.
    Options menu > Create new Preflight Fixup
    Name it "move yellow  to layer"
    Choose the Layers category, "Put objects on layer" and press ADD
    In the "Objects identified by a check" dropdown, select your "yellow boxes" check.
    In the Layer name field, type "yellow boxes"
    Click OK, then click the Fix button to run it.
    You'll get a message to save/close and reopen the file.
    When you do, (hopefully) all your yellow boxes will now be in their own layer.
    Open the layers navigator on the left side of Acrobat's window and turn off the eyeball for that layer.
    Print

  • Trouble with parallel add and remove effect in TileList

    We have a TileList of images.  As the user drags a new image along the list (deciding where to drop it) a blank frame drops in to show them where it will be inserted when they drop it.  Therefore, I have to add and remove simultaneously, while still dragging.  For example if they are at index zero, a blank frame is in index zero.  As they move to 1, the blank frame appears to move from index zero, to index one, as the image that was at index one appears to move to index zero.  But what I'm really doing is just removing and then adding the blank frame.
    I think the following code should accomplish this.  And it works, most of the time.  Every so often, there is a delay where is does the REMOVE, and then waits until the Back.easeOut tween is complete, and then does the ADD.   It is intermittent.  Any ideas, or is there a better way to do it?  Thanks
    MXML code:
        <mx:Sequence id="myEffect">
            <mx:Parallel>
                <mx:Move
                    duration="600"
                    easingFunction="{Back.easeOut}"
                    />
                <mx:RemoveItemAction id="dcmRemoveItemActionTag"
                                     />
                <mx:AddItemAction  id="dcmAddItemActionTag"
                                   />
            </mx:Parallel>
        </mx:Sequence>
    actionscript code:
                    _sharedMedia.removeItemAt(_sharedMedia.getItemIndex(_dropPlaceHolderimage));
                    _sharedMedia.addItemAt(_dropPlaceHolderimage,dropIndex);

    hi,
    You could do this a couple of ways, you could have a slight delay set on the remove effect so that it doesn't interfere with the ease function.
    or
    You could add the item instead of an empty frame, on the dragdrop event you don't need to do anything if you get a dragexit triggered then you simply remove the item completely.
    David

  • How to Remove a record from PER_ALL_PEOPLE_F

    Dear All,
    I want to remove a record from per_all_people_f, the employee record exist in the table but not shown on the people screen. Do I need to use any API for that or simple SQL command?
    Please help asap.
    Regard.

    Hi,
    What responsibility have you logged in as ?
    Is the security profile attached to that responsibility properly defined so that all employees can be viewed ?
    Does the record in the table show an end-date of 31-dec-4712 ?
    If the data in the table is fine, then it has to be an issue with security of the responsibility.
    Cheers,
    Vignesh

  • Is it possible to remove "Revision" from standard check in

    Hi,
    Is it possible to remove or disable the revision text box in the standard check in screen. This number can be changed by the user each time the document is checked in. It can be changed to go backwards and use duplicated is the user changes it without giving an error i.e. 1 - 3 - 2 - 3. The documentation says "The revision increments automatically with each check-in of the content item, so generally, you should not change this value"
    Is there a way to remove/disable this from the standard check-in to prevent people changing it.
    Thanks

    Kizume and Rhm Zanz it should be still there as that is what manages that specific feature.
    In the top menu bar, where is says:      Finder   File   Edit   View   Go   Windows   Help
    Click on the Go, and in the same time click the option key on your keyboard near the space bar.  In that the drop down menu list the word Library will appear.
    Click on Library and Finder will open, look for the Preferences folder. Within that folder which should be in alphabetical order look for the file named, com.apple.sharekit.recents.plist
    Drag that file out of finder and unto your desktop. Close out the Finder window and close out all other your applications, including Safari, and reboot your Mac and once it turns on, reopen Safari and look at your share sheet. Any recents should be gone. That file named com.apple.sharekit.recents.plist will recreate itself on a clean slate in that folder. Should you encounter that you shared something again to a contact with Safari's share sheet, be sure to follow the same directions.
    Cheers!

  • Removing a record multiple times

    hi ,
    i have a multi select table and a command button to remove the selected records(Iam calling a stored procedure to remove the record).
    i could able to remove the records for the first time.
    but when i wnt to delete the a record after deleting one for the first time i am getting a null pointer exception in the stored procedure call, i could get the values that are selected in the page.
    Please help in resolving this issue..
    i removed selection state and selection listener for that table..
    Does is affects?
    Thank you ,
    Naveen

    thanks for your reply.
    but when iam setting the selection state to <iterator>.collectionModel.selectedRow,
    iam getting the required functionality.
    I want to know that is there any way that we can set the selection state of a table dynamically in the java code

  • In the numbers app, using the "date and time" function, is it possible to remove the time? I need to put together a list of dates, but I don't need or want times.

    In the numbers app, using the "date and time" function, is it possible to remove the time? I need to put together a list of dates, but I don't need or want times.

    When formatting your column to date/time, pick Date & time, and then pick the letter i in the circle to the right. Then scroll down and pick "No time"
    Jason

  • Is it possible to remove or edit gps data from photos?

    Just listened to a Mac Roundtable podcast and they were talking about removing or editing gps data from photos taken with an iPhone but they never explained how to do it.
    Is it possible to remove or edit out latitude and longitude info from photo files?

    Thanks for this, though after looking at it I'm not too inclined to use an app that requires getting into the terminal. Way too technical for me. But thanks.

  • Is it possible to remove leading 0's?

    If I have a column called id_inst in tableA of type String
    and having a value of 0000203,is it possible to remove
    the leading zeroes from it?
    Select LTRIM(id_inst, ??
    Is this possible?

    There is of course no need to strip leading zeroes before storing a numeric value into a number datatype since Oracle will not store leading zeroes anyway.
    How a numeric value retrieved from the database is display is completely under the control of the requester via the to_char function:
    UT1 > select fld2, to_char(fld2,'009') as c2, to_char(fld2,'999.99') as c3
    2 from marktest;
    FLD2 C2 C3
    1 001 1.00
    2 002 2.00
    3 003 3.00
    5 005 5.00
    6 006 6.00
    HTH -- Mark D Powell --

Maybe you are looking for