Is it possible to render the clips individually and relink- such as with Color/fcp?

I'm fairly new to Ae/ PP, and am trying to figure out a good workflow for grading (using resolve lite) Basically, I need to denoise my footage first (neat video) and then send that footage to Resolve, then back to pp. Now, this works fine with Resolve's scene detector as it can cut up the footage, but if there are any dissolves, etc, then I need to do this via xml instead.
What I would like to do is: Edit in PP. Send to AE to denoise, render (the denoise need to happen before grading) and replace the original files with the new denoised clips in pp. Then send the xml to Resolve. So far this would work if it wasn't for AE rendering everything into one clip, eliminating the cuts/layers.
Is it possible to render the clips individually and relink- such as with Color/fcp? If not, any other workflow that could work for me?
Hope someone can help- dynamic link is driving me up the wall.

Simply use Dynamic Link to send your whole timeline to AE or use AE's Premiere project import. Then once you have a working AE project, you can use scripts like rdPreCompose to create separate sub-comps for each clip which in turn you then can render separately. Still, the limitation will always be the kind of transitions you use. Essentialyl you should avoid anything that isn't a hard cut or simple cross dissolve 'cos there's no way to recreate it in AE without eating up the handle of your footage. You'd essentialyl be shooting yourself in teh foot if you jump ahead too far in Premiere and already add too much finishing there.
Mylenium

Similar Messages

Is it possible to create the adhoc network and get it work with WLAN APIs (WlanConnect) instead of netsh commands...?

Hi All,
I am facing issues in creating adhoc network in Windows 8.1. After searching in internet, I found that adhoc works with
netsh commands.
1. I have tried neths commands and able to get it work on windows 8.1,
but I want to do it through the WLAN APIs ie. WlanConnect ,
2. I am able to initiate the adhoc network(on Windows 8.1) by using WlanConnect API and other device are also able to connect to the Windows8.1 initiated adhoc network but the DHCP is not working.
-> clients are not able to get the IP address.
Is it possible to create the adhoc network and get it work with WLAN APIs (WlanConnect) instead of netsh commands...?
Thanks
akhil

Hi,
Did you mean to write a program to implement that creating adhoc via UI? This should be development issue.
But this is Windows 8.1 client forum and there is no professional on develop.
To help you better, I suggest you submit a new case on MSDN forum to help to check your code as they will be more professional on your issue:
This is the MSDN forum link.
http://social.msdn.microsoft.com/Forums/
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Kate Li
TechNet Community Support

Can I import clips to FCP X at 180 degrees rather than flipping the clips individually once they are imported?

Can I import clips to FCP X at 180 degrees rather than flipping the clips individually once they are imported? I have about 300 clips all recorded upside down and i am looking for an easy solution.

Plenty of apps will rotate them.MPEG STreamclip has a batch function.
Russ

Is it possible to get the style, font and related info of a paragraph of a in design file and write it on the same in design file on the left side

Is it possible to get the style, font and related info of a paragraph text of a in design file and write all the stuff on the same in design file on the left side with small fonts
as
Lets this is a text in in design file    :
style : abc                      we are going to check the condition Agence Wallonne pour la Promotion d'une Agricultur we are going to check the condition Agence Wallonne pour la    font 12                                  d'une Agricultu we are going to check the condition Agence Wallonne pour la Promotion d'une Agricultu
style : xyz                      we are going to check the condition Agence Wallonne pour la Promotion d'une Agricultur we are going to check the condition Agence Wallonne pour la    font 10                                  d'une Agricultu we are going to check the condition Agence Wallonne pour la Promotion d'une Agricultu

Hi Poojith
Not sure if this would solve your requirment but just in case might be helpful:
1. We can mix up the HTML and HTMLB components in the JSP Page. However, can access only the HTMLB components in the controller. The following link refers to what customizations are offered by the HTMLB framework:
[http://www.sapdesignguild.org/resources/htmlb_guidance/]
2. Another option would be to use AbstractPortalComponents or a simple web app if that's feasible. (where custom UI themes, css and layout are more in control of the developers.)
Thanks
Deepak

I'm attempting to sync several albums from itunes to iphoto. When select to sync all albums it copies over the previous recorded album. I tried to sync the Albums individually and the same thing happens. Any ideas on how to sync my albums?

I'm attempting to sync several albums from itunes to iphoto. When select to sync all albums it copies over the previous recorded album. I tried to sync the Albums individually and the same thing happens. Any ideas on how to sync my albums?

Hi NWL1,
Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

Is it possible to upgrade the iMac G3 (1998) to an iMac with Mac OS X Lion or Mountain Lion ?

Is it possible to upgrade the iMac G3 (1998) to an iMac with Mac OS X Lion or Mountain Lion ?

The 1998 iMac predates the introduction of Firewire. So yes, it is limited to 10.3.9. Sonnett did offer an upgrade to the iMac to allow it to have Firewire. I don't know if this enabled 10.4 or not. XPostfacto also offered unsupported 10.4 for older iMacs. But Spotlight and Dashboard are very slow if you can't upgrade to a minimum of 256 MB of RAM, and preferably 512MB of RAM. Look at http://www.everymac.com/ to find out your Max.

In mini bridge, is it possible to view the file name and the rating at the same time?

Hello,
In mini bridge, is it possible to view the file name and the rating at the same time?
Thank you.

if you know when a new image arrives and you can retrieve that new image file name ...
Well, that's precisely my doubt, how can I know the file name? Is there a property/method for it?
function loadImages() {
for (var i:int=0; i<imagesNames.length; i++) {
var imgLoader:Loader=new Loader;
imgLoader.contentLoaderInfo.addEventListener(Event.COMPLETE,imgLoaded);
imgLoader.load(new URLRequest(imgPath + imagesNames[i]));
function imgLoaded(par:Event):void {
trace(par.target,par.target.content,par.target.content.name);
Output window:
[object LoaderInfo] [object Bitmap] instance160
[object LoaderInfo] [object Bitmap] instance159
[object LoaderInfo] [object Bitmap] instance161

Is it possible to change the font size and weight in an ADF table?

Is it possible to change the font size and weight in an ADF table? I have tried to change the various font size and weight settings for a table and its columns and they seem to have no effect on the font size or weight in a table row.

You would use skinning to modify font-size & weight for the table.
In addition to the link suggested by Vinod,
Take a look at http://biemond.blogspot.com/2009/01/adf-skinning-in-jdeveloper-11g.html
Thanks,
Navaneeth

Is it possible to hide the save function and only use the save as function in teststand

Hi,
When i'm done building a sequence i want to prevent other engineers to save the sequence with the same filename (or version number).
Is it somehow possible to "hide" the save button and only use the save as function?
Or is there another possiblity to solve my problem.
The idea is to have a sequence called Sequence_V1.0.seq which i have build. When installing this in a factory enviroment I would like whenever there is a change needed in the sequence that the version number increases (manual action) (becomes Sequence_V1.1.seq). So from the moment you want to save i would like to only have the function save as. In this way you are obligated to fill in a new sequence name (original sequence will be read-only)
What would even be great if there could be a log of what the changes were
Thx!!!

1) You could mark the file as read-only, by default you would then not be able to save over it. The user could make it not read-only though if they know what they are doing.
2) Another possibility is to lock the sequence file for editing (this is a teststand feature). Go to the Sequence File Property dialog, on the advanced tab, where it says Password Protection, set it to Not Editable and give it a good password. This doesn't however keep someone from saving another file to the same name as the locked one, but they at least won't be able to saved the locked file again without your password, nor will they be able to edit it.
Hope this helps,
-Doug

It's possible to integrate the OBI 11.1.1.7.0 with EPM 11.1.2.3?

It's possible to integrate the OBI 11.1.1.7.0 with EPM 11.1.2.3? I'm trying to do so but it's not working correctly.

Not sure this will help you !!!!
https://blogs.oracle.com/proactivesupportEPM/entry/obiee_11_1_1_7
Thanks,

How is it possible to adjust the background images and the text in Mail?

How is it possible to adjust the background images and the text in Mail?

Here's the solution I used to solve the same problem. If you're not comfortable editing the source files, this might be more than you want to take on--but I've done it to several files with no ill effects. You can follow the instructions on this page and the referenced original post from (he includes a link on the page). Good luck! He's got some great tips on some of his other pages.
http://photo.rwboyer.com/2010/03/15/aperture-3-book-theme-trick/
A warning about editing the Master pages--it only edits them in that book--it doesn't update the theme. So if you go to create another book with those same layouts, you'll have to duplicate the book and replace all the images. An alternative would be to create a "clean" book with no photos in it and then just use that as a starting point each time.

Is it possible to do the audio capture and playback simultaneously?

In short :
Is it possible to do the audio capture and playback simultaneously? . If it is not supported directly by Sun, pl suggest another way to achieve the same.
In detail:
I am doing a voice chat application by using the streaming through UDP . I am able to play the byte stream. But , is it possible to capture sound simultaneously (while playing the audio) to send to the other end?
Edited by: dhillarun on Jan 4, 2008 7:11 AM

If you're Airplaying from you computer, you might be able to do this. Here's what I would try:
Go to the Airplay icon in iTunes. You should see both your Apple TV and your speakers listed as options. Select "Multiple speakers." You'll see both devices together. Turn the volume all the way down on the Apple TV. You should be getting the video on the TV, but only hear audio through the speakers.
Using the "Multiple Speakers" option will sync the output of your devices so that the sound matches the picture.
I haven't tried this myself, but I'm thinking this would work. However, this approach will only work when using Airplay from your computer – not from am iPad or iPhone – as they don’t have the "Multiple Speakers" option (as far as I know). It also won't work with content streamed directly to your ATV, obviously, because there's no way to stream from ATV to other devices.
Let me know if this works.

After the last update of the iPhone 5.1 sound became low tones specifically entered into the settings and made the maximum sound d, but to no avail there is no update for this problem Haddl Is it possible to delete the Japanese language and take advantage

After the last update of the iPhone 5.1 sound became low tones specifically entered into the settings and made the maximum sound d, but to no avail there is no update for this problem Haddl Is it possible to delete the Japanese language and take advantage of memory storage space
Osmhto tried to solve the problem of low sound we have become we do not hear a tone sounds clearly like the first phone

hello...
I am having the same issue here... just upgraded my 5s to 7.1.1 (never jailbroken - factory unlocked) and then boom... NO Service!!! Searching ... that's it. currently using Smart Telecom Sim... at first it was working for me... after 6-7 hours, it started the No Service issue. I cannot send a text or make a call...
I did the steps you have taken but it is still not working... any updates on your end?

Is it possible to implement the drill down and navigate reorts in narrative

any body pse help me to find 'is it possible to implement the drill down and navigate reports in narrative view'

Hi user12255470,
Go URLs are a way to directly call an Answer Request or Dashboard Page via a URL. In addition, you can even pass parameters in the URL as filters. GO URLs are used will you want to allow a user to drill into detail by clicking on a static text. It also allows other tools to drill into OBIEE.
Here's an example GO URL: http://LOCALHOST:9704/analytics/saw.dll?Go&Path=/users/administrator/OTN Tests/Page Test&Style=oracle10&Format=PDF
I'll break down each piece
LOCALHOST: This is the URL for your OBIEE web host
:9704: This is the typical port for OBIEE installs (sometimes 7777)
?Go: This is where the it's gets the name "GO URL". It's the GO command.
&Path= : This is the full path of the report. In my case, it's in the administrator folder in a sub folder called OTN Test. The report itself is called Page Test.
&Style=: This sets the style, or the look and feel, on how the report is presented. The default is oracle10.
&Format=: You can set this to default the presentation. I set it to PDf so that a PDF will generated.
Good luck and if you found this post useful, please award points!
Best regards!
-Joe

Movie maker does not put the clips together and no audio HELP PLEASE!

What is the deal with the movie maker feature I click on all the clips I want for the movie , then click the Create movie feature and it only blends a small portion of the clips together , and there is no audio at all what gives? Im doing what it says to do.. The software for the vado movie making and editing is to vague..

I Hightlight all the movie you want to combine then click create moi've, I think you must then re-highlight them then click preview. But you might want to go to settings and move the slider all the way to the right so you only hear the audio from your videos.

Is it possible to render the clips individually and relink- such as with Color/fcp?

Similar Messages

Maybe you are looking for