Is it possible to repair or recover a corrupt imovie?

I am able to see the timeline in projects but unable to edit. This project actually corrupted the entire application and I needed to uninstall and reinstall imovie, however, the file/project remains corrupt. Any savvy ideas of how to recover the hours of editing?? thank you kindly.

Read threads over on the right under the heading of More Like This
Allan

Similar Messages

  • How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility

    How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility?
    Last night i was using my external hard drive, for some reason the folder just closed and i couldn't find it on my desktop.
    After googling solutions, i found it in the disk utilities, i clicked on the 'repair' button many times, but it said the 'error...' message.
    So i ejected it to try again, now when i connect the USB external hard drive it doesn't show up on my desktop or disk utilities.
    I really just want to either repair or recover the data on it because it literally has everything (documents, work files, photos etc) on it,
    I downloaded an application to recover my files but it needs the USB to at least show up.recognise it which mine doesn't.
    I know i should've backed it up on another USB, this definitely teaches me for next time to back up all my files.
    Are the files lost forever or can i recover them by going to a shop or using a software?

    Thank you for responding.
    This might sound stupid since i'm not really knowledgeable with Macs,
    but since all my files were moved from my mac computer to the external hard drive,
    is it possible to recover those files through my Mac - like recovering deleted files? 

  • Is it possible to repair a wireless keyboard

    I have a wireles Mac keyboard and the (N) stoped working.Is it possible to repair it??

    First I would try to replace the batteries.
    http://support.apple.com/kb/HT3903

  • My iPhone4s fell in the water .Is it possible to repair and how ?

    My iPhone4s fell in the water .Is it possible to repair and how ?

    ok thnk you . but i try to tun it on before

  • I've forgotten my security questions Is it possible to help me recover again

    I've forgotten my security questions Is it possible to help me recover again

    Click here for information. If the option to have the answers emailed to you isn't available or doesn't work(the email may take a few hours to arrive), contact the iTunes Store staff via the link in the 'Additional Information' section of that article.
    (89869)

  • EDB's will Not Mount, Repair or Recover.

    I have attempted, unsuccessfully, to repair and recover my edb's still will not mount. I have a dirty shutdown and "0" on the consistency. SBS 2003
    I have recently began working with this server...Absolutely NO backup. The .pst's are on the workstations and the office is sharing calendars. However, two users can access email's and the calendar's are only viewable. I am shocked this much is happening...
    The 9 year old hardware is being replaced. Any suggestions on successfully moving mail to the new server? I have never had an exch issue to this degree.
    Many Thanks. :)

    Hopefully you have a copy of the database prior to attempting a repair
    Sounds like you have a new server up and operational correct?
    If so and you are looking to get the data out of the damaged EDB, I would copy the EDB and STM off the problem server to an alternation machine and then download Lucid8's DigiScope
    http://www.lucid8.com/product/digiscope.asp, point it at the copy of the database and see if it can successful open it.  if so then you can use teh product to export all data to PST
    or to migrate directly from the old exchange server offline database to the new production server
    Troy Werelius
    www.Lucid8.com
    Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline EDB's and Live Exchange Servers with Lucid8's DigiScope

  • Is it possible to repair a brooken iPad screen?

    Is it possible to repair a brooken iPad screen?

    Hi!
    I just read your post and wanted to let you know that through my personal experience I recommend you iPad 3 Screen Repair Guide, I like ifixit's stuff, but they always fall short. They just tell you to put it back together the way you took it apart. After successfully following this guide I can tell you that you definitely need to know the special tips to put it back together correctly. “iPad 3 Screen Repair Guide” they have a video as well as a step by step guide. I hope this helps you out!
    http://ipadscreenrepair.com/ipad-3-screen-repair-guide/"

  • My iphone 6 bought from Taiwan, still under warranty. is it possible to repair in singapore?

    my iphone 6 bought from Taiwan, still under warranty. is it possible to repair in singapore? Thank you

    No, iPhone warranty is not International.  You have to return the phone to the country you purchased the phone in to get warranty service.

  • Trying to repair files recovered with Photorec

    Does anyone know how to repair files recovered with photorec. I was able to recover the files after deleting them but now I have an issue of having to link the audio back with the video. Any suggestions
    Thanks
    j.

    Media is very finicky, and if it has been deleted and recovered, you'd be hard pressed to get it to work properly again.
    My suggestion is to recapture from the master tapes, or reimport from the card backups if tapeless.
    Please tell me you have the masters...because if you are trying Herculean efforts to recover data, I have the sneaking suspicion that you don't have them.
    Shane

  • Is is possible to repair Hi8 tapes in FCP ?

    Hi, I've got a couple of old Hi8 tapes from which I need to capture.
    Bits of them speed up of their own accord, including the audio.
    What is this, how did it happen and is is possible to repair?
    Thanks,
    Mark

    this sounds as though there was a big problem on the camera that shot the footage. motors went wonky ? does not matter now of course.
    try and get the footage into your machine as clean as poss (as studio x mentioned a TBC can help here) then play around with time remap on your clip to try and get it right...It will be a bit suck it and see but you should get it sorted
    best regards
    andy

  • Hello, into my ipod there got some water and it doesnt work. Is that possible to repair it in the apple store? Thanks!!!

    Hello, into my ipod there got some water and it doesnt work. Is that possible to repair it in the apple store? Thanks!!!

    Apple will not repair your iPod, instead they will exchange itfor a refurbished one for a fixed about.  The price is listed here:
    Apple - Support - iPod - Repair pricing

  • Possible to repair of Iphone 4 in other countrys?

    I bought it in UK this Jan., and the display is broken. Is it possible to repair in Singapore? I'll go there these days. Thanks a lot.

    Internos,
    This has been Apple's policy since the original iPhone was introduced in 2007.  The warranty is NOT international, and even without warranty, Apple rarely will perform any service on a phone purchased elsewhere. 
    You don't have to like it or agree with it, put the policy stands.  Your other option is to use a 3rd party repair shop.

  • My canon 100d dropped in water for 3 seconds is it possible to repair it?

    My canon 100d dropped in water for 3 seconds is it possible to repair it?

    If dropped in salt water, it's a goner for certain. Contact your insurance company.
    If dropped in fresh water, it might still work. But it depends upon how much moisture got inside and a bit of luck. 
    1. Remove the battery. Important. Do this first. You want to remove power sources in hopes of preventing electronics from shorting out.
    2. Turn off camera. Remove the memory card.
    3. Remove the lens (optional, see below).
    4. Leave open battery compartment and memory card compartment doors to help air out inside.
    5. Pop up the flash and leave it standing open.
    6. Remove the eyecup and set it aside temporarily.
    (Note do not remove lens or open up this way if you sit the camera in rice. You do not want rice dust getting inside!)
    Let sit for some days to dry. Do not put the battery back in and turn the camera on until you are certain it's completely dry.
    If the lens got soaked too, then it's going to be harder to get dry inside and likely ruined. Try leaving the caps off and standing it on end to dry. But it's still likely to end up with stuff dried onto the optics inside, at best. At worst, it will develop fungus or mildew inside. This can happen inside the camera, too.
    Most repairers won't even look at a camera that's been dunked in water. They too often simply aren't worth trying to repair. To be done right would require complete disassembly, cleaning and relubrication.
    But it costs little or nothing to try dyring it yourself.... after you get it completely dry, if it's still working okay it might be possible to have the focus screen and mirror cleaned, if that's needed. Don't try to clean these yourself. Both are very easily damaged by the wrong cleaning solutions or incorrect procedures.
    I've never had a camera get dunked in water... but have gotten caught in heavy rain with cameras, lenses and flashes... I followed the above procedures (no rice, just warm air from a hair dryer) and everything survived and continued to work fine after a few days drying out. There was no sign of water inside the cameras or lenses, though.
    Alan Myers
    San Jose, Calif., USA
    "Walk softly and carry a big lens."
    GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
    FLICKR & PRINTROOM 

  • How to recover a corrupted MSWord Document - corrupted graphics / corrupted tables

    Hello i am hoping to find someone who can guide me in recovering a word document for me... I was working on it had my auto save set to every 4 mins and all
    was well. closed ms word normally only to find the next time i open i get "a table in this document has been corrupted..." 
    Just to be clear i know all about word open and repair and recovering the last saved file etc. Those are not working. I get my file back but several graphics and
    tables are missing/messed up. 
    I am hoping that someone has some insight into this (maybe some document repair software that works well) and can help me restore the document or at least open
    it somehow with the original pics showing so that at least i know how to make changes to the new document. 
    Hope this makes sense. very urgent.

    
    If you're using Windows 7, the built-in shadow copy centre may have an older and uncorrupted version of your file.
    Launch Explorer, right-click the folder that contained the document and select Properties.
    If you see a Previous Versions tab then click that.
    If all is well then you'll see a list of entries for the folder, going back days, or maybe weeks.
    Double-click one with a date when you know the document was readable, and try opening this older version.
    Save it with a new name, and then repeat the process with later folder entries until you reach the point where the file became corrupted.
    If methods above didn’t work for you, you can use undelete tools like Any Data Recovery Pro (http://www.any-data-recovery.com/product/datarecoveryprofessional.htm)
    or Revuca (http://www.piriform.com/recuva/features) to help you find old Office temporary files. After that, rename the TMP extension to match the real document format, and then try opening it to see what you've recovered.

  • How can I recover a corrupted av.mov file? Please help!!!

    I was capturing straight from my camera into FCP by capture window. During that time ,my compute break down .Then I
    restart my FCP .Now, I am not able to open the file I captured. I can see the file's name(av.mov file) on my hard
    drive(the size is right,about 3.6GB), but I can not access the file. I ran the disk repair, no problems were
    found.Also,I can and did move the file to another drive
    I try to fix it by meagtream, it's seem to not work.
    Is there a way to recover a corrupted .mov file?
    Please Please Please help !

    Hello,
    Corrupt movies like yours can be recovered. It's quite hard, you have to rebuild the movie index.
    There's a free application called Treasured to diagnose and preview your damaged movie files:
    http://aeroquartet.com/movierepair/download.html
    Treasured also explains how to contact the right person to get your movie repaired (me
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."
    Regards, BJ

Maybe you are looking for

  • Security violation exception with Weblogic cluster installation on OIm 9.1

    Hi, I have OIM9.1 installed on weblogic 8.1 SP4 in clustered environment, which more often than not seems to work fine. But some time I get following exception on server console/log file which causes certain provisioning task to be rejected... at web

  • Transfer of Video from Windows Movie Maker to PE7

    Hi, I put together my first video using Windows Movie Maker, and the audio tracks are wma files. I just got Premiere Elements 7 and want to transfer the video to it from Movie Maker, but I understand that in PE7 audio files should be either mp3 or wa

  • Error: Not Enough RAM to Open Small Files

    MacBook5,2 Macintosh OSX 10.6.3 4GB RAM NVIDIA GeForce 9400M - 256MB Adobe Photoshop CS4 Extended (11.0.1) I am rendering TIFF files out of Maya that are 11880 x 3400 pixels.  The file size ranges between 100 - 160 MB.  Whenever I attempt to open one

  • How to use effects to create soft skin tone and glowing look face in video.

    Sample video links of late Whitney Houston video, " I will always love you" http://music.yahoo.com/whitney-houston/videos/view/i-will-always-love-you--2153012 http://www.mtv.com/videos/whitney-houston/59560/i-will-always-love-you.jhtml http://www.dai

  • QuickTime update error

    I am trying to upgrade QuickTime/iTunes on my mother's XP PC. Each time I run the installer, it throws an error when updating QuickTime: "The feature you are tying to use is on a network resource that is unavailable. Click OK to try again or enter an