Is it possible to Replace audio in a video without re-importing and re-exporting ?

Hi..
i have exported a video of 2 hours length.. Then i just feel i need to replace the audio with another audio file which has small tweaks in it.. Can i replace the audio in the video i exported without having to reimport the video into fcpx and re-exporting ??
can i do this ? is there a way to replace audio ? any external apps available ?
Do let me know.. Thank you !
Regards,
Arun Kanth

If you're set against reimporting/exporting: Quick Time Pro should accomplish what you're trying to do. It's a $29 license, but is much more useful than QTX and is a tool worth having if you don't already/
http://re-sounding.com/2012/01/05/replacing-audio-track-qt/
Russ

Similar Messages

Replace audio in multiple video clips at one time

Hello. I am new to the forum so I apologize if I break any of the rules!
I have a collection of tutorial videos, all edited but the audio had some balance issues. The files were not in Premiere Pro at the time. They are the final edited videos but then I was told the audio needed to be adjusted.
I have re-balanced the audio, saved the audio as wav files and now I need to replace the old audio (in the finished video file) with the new audio (the wav files I edited and saved). The timing is all the same. It's just a matter of replacing the current file.
Is this doable as a batch process? Is it doable in Premiere Pro or do I need to use Audition or some other Adobe software?
I hope this makes sense.
Thank you in advance!
Alan Read
SC, USA

hello ,thanks for jour mail ,but my English is very very bad sorry but
many thank for your feedback. Hav a nice Day
Am 09.12.2014 16:57, schrieb carpmusic:
>
Replace audio in multiple video clips at one time
created by carpmusic <https://forums.adobe.com/people/carpmusic> in
/Premiere Pro/ - View the full discussion
<https://forums.adobe.com/message/6998981#6998981>

Does anyone know if its possible to replace the battery on a 3rd gen nano and where and how much?

does anyone know if its possible to replace the battery on a 3rd gen nano and where and how much?

http://www.ipodjuice.com
http://www.ifixit.com
http://www.iresq.com
https://selfsolve.apple.com/agreementWarrantyDynamic.do

I want to know if there is any possibility to replace my old macbook with a new one and pay a price difference ?

i want to know if there is any possibility to replace my old macbook with a new one and pay a price difference ? I have a 2008 Macbook that is slowly failing on me and i wanted to know if there is any possibility to bring it to an apple store and swap it with a newer one and pay a small amount of money? If not does anyone have another suggestion how not to pay that much money to buy a new one and/ or maybe seling my old one for some money ?
Thank you would appreciate any help !

RockayaAbdel wrote:
I have a 2008 Macbook that is slowly failing on me and i wanted to know if there is any possibility to bring it to an apple store and swap it with a newer one and pay a small amount of money?
No. but you can sell it privately and use the proceeds towards a newer used model.

Is it possible to deauthorize or unsync an iPad without wiping it and starting over?

Is it possible to deauthorize or unsync an iPad without wiping it and starting over? My ipad3 and my ex's ipad2 are both synced with my computer. I have to sign in under his id to update the apps purchased thru his ipad/id (and vice versa) and we'd like to be rid of the connection. My apps are on his ipad and his are on mine. We synced both through my computer. Is there any way to separate the two?

Once I deauthorize his device from my computer, can he still use the apps under my ID on his ipad?
I am not familiar with how you would deauthorize his device from your computer, aside from wiping his iPad and not allowing him further access to your account or your content. If he knows your password you need to change it.
Also, does deleting his apps from my ipad and computer affect the apps from his ID on his ipad?No, his content should be fine on his iPad.

Is it possible to make a slideshow or presentation without the fading (and horizontal l and vertical) so no transition at all?

Is it possible to make a slideshow or presentation without the fading (and horizontal l and vertical) so no transition at all?
(I would like my dog to 'run' more smoothly across the webpage in a very quick slideshow)

Hi,
You can set the transition to any of the three options available (fade, vertical and horizontal ) and set the transition speed to "0" . This would remove all sorts of transition effects from your slideshow.
Please refer to this screenshot :- http://prntscr.com/4rdaqm
Hope this helps
Regards,
Rohit Nair

Audio sync drift after "live" CD import and convert to 48/16

I shot DV footage on a PD150 cam. The band recorded a CD from sound board to replace the mic audio of the camera. I'm running Final Cut Pro 3, and I have already converted through Quicktime the CD tracks to aiff files running at 48 ( they were 44.1) and 16 bit. The DV cam Orignal audio was also recorded at 48/16. Now when I try to sync the Cd audio (48/16) to the video clips 1: the audio sync drifts off during the song, and though it started right, the whole sync is way off by end. 2: The audio file in the track bar is longer than the video clip in the track bar above. huh? Could it be data rate Audio 187kbps vs. Video 188kbps or should I try and slow/speed up the play rate of either vid or audio. Or is this an impossible meshing of media?
G4 Mac OS X (10.4.8)

As Jim says, it's a function of how this was done. Next time you will know to look for ways to avoid the issue. But all is not lost.
I'll give you the skeleton and you can figure it out.
Find exact sync points near the beginning and end of the "video audio" and the "CD audio". Use drum beats you can be sure are the same. Identify them by ear and then by their waveforms, and put clip (not timeline) markers at those points.
Sync up the ones near the beginning exactly. Now go to the other two, find out how far apart they are, and write it down. How? I haven't got all day.
Calculate the time between the 2 markers in the video clips's audio, and between the markers in the CD audio.
Translate both of those numbers into frames.
Calculate the percentage by which the audio is longer CD audio / video audio = X%.
Go into Soundtrack Pro or audio app of your choice and make a version of the CD audio that is sped up by X%.
Bring that back to FCP and replace the version on the timeline with it.
If the markers didn't survive, find the sync points in the new CD version. Line up at the beginning. If the ones near the end now match, everything is done and you can call me "Helpful" and "Solved". If not you can be angry at me or read it again.
Good luck!

How can I batch replace audio in .avi files without re-encoding?

I have hundreds of .avi files that have two audio channels. One channel contains the audio from the original video footage, and the other channel contains speech-shaped noise that was added later.
I need to replace the speech-shaped noise with a different type of noise (multi-talker babble) without re-encoding the video and degrading its quality. I would like to be able to do this in a batch process if possible. Do any of you have an idea about how to approach this in Premiere Pro?
Some more details: each .avi file is about 2-3 seconds long, so I would need the replacement noise to be the same length as the original noise.
Any advice would be greatly appreciated.

Using -replace:
$strings = @(
"Karaoke A Spoonful Of Sugar - Mary Poppins -_fwCVHtOQUk",
"Karaoke Ain't No Stoppin' Us Now - McFadden & Whitehead -kzh0Df42vms",
"Karaoke Ain't Nobody - Chaka Khan -qDP3_jInyl0",
"Karaoke A Tisket, A Tasket - Ella Fitzgerald -amgeW6HqaVo"
$strings -replace 'Karaoke (.+) - (.+) -.+','$2 - $1'
Mary Poppins - A Spoonful Of Sugar
McFadden & Whitehead - Ain't No Stoppin' Us Now
Chaka Khan - Ain't Nobody
Ella Fitzgerald - A Tisket, A Tasket
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

Is it possible to add audio with a simple play/pause button and also have a clickTag attached to the full stage?

my client wants to add audio to their banner ad (which always has a full stage clickTAG set). I'm trying to figure out a way to just use a simple play/pause button and attach a toggle action to it. Problem is when the user clicks it's going to the clickTAG URL that's attached to the full stage. Is there any way around this?
Please advise and thank you in advance.

I have the same issue. It is pretty annoying but at least the audio remains within the motion project. It just isn't accessible it seems as an FCPX template. So what I'm doing is this:
I still use the video within FCPX's generator section so that you can edit the parameters as you need to
For the audio, open the project in motion then under Share, click 'Export Audio'. Select 'CAF' format and save to your hard disk
I then import the audio file into an event I set up specifically for this purpose (per BenB's suggestion).
When I need it, I then insert the generator from the generators section and then attach the audio file below the primary story line for the audio track
It isn't pretty but it works.

Is possible to have audio output during video recording with Canon 70D?

Hi everybody,
I am owner of a Canon 70D camera and I use this to record video (live) jazz small groups.
I use for this audio input either external microphones (Rode or AKG) or my Zoom H4n digital handy recorder which has inside microphones.
I want to ask you if there is a solution to hear at the same time the audio output from my Canon 70D via earphones which is suitable for studio recordings.
I hope to have a clear answer about this....
Regards
Tasos Architektonidis

You should check Magic lantern about this. I suppose the answer is no.
My Swedish blog
X100, 7D, 6D, 17-40/4L, 70-200/2,8L IS II, 17-55/2.8 IS, 24-105/4L, 85/1,8, 50/1,4, 24/1,4L II, Helios 58/2
Darktable, RawTherapee, Photomatix, Luminance HDR, GIMP 2.9.1.

When using Final Cut Pro X, how do I just use the audio from a video that I imported?

I just want to use the sound from a video I imported. Is this possible? Thanks!

Sure you can do this. Add the video to your project timeline. Right click the clip and select detach audio. Set in and out points for what you want to export and in the export settings choose audio only and select file encoder you want AIFF, CAF, MP3 etc.. This will give you an audio only Quicktime file which you can then import to FCP to use like any clip.

No Audio in a video published on Youtube, and created with QT10.

I have created a screencast with QT10, and in my Macbook Air is perfect. HD quality also with perfect audio. after that i publish the video on Youtube, and with my surprise i see the screencast but i don't ear nothing.
Someone else have the same problem?

I am having the same problem. I can upload a screen capture video in .mov format to YouTube using the Upload button on YouTube's site. The video is OK, but there is no audio. If I upload through QuickTime's Share menu, there is only a partial upload. There is both video and audio, but only about half of the file gets uploaded. Why is this happening?

I'm trying to copy my bookmarks to an external hard drive. I went to 'bookmarks', 'organize', 'import and backup', 'export html. When I click on 'save', it says there is already a copy of this, do I want to replace it?" I don't see any way to say that I w

Sorry, I thought I was supposed to do that in the previous step.
That's pretty much it, I think. Using Firefox 3.6.

When you click export as HTML, you can select the file name and where to save it. If a copy exists already in the folder then you can just change the name (I like to put the date in the file name) and then save it.

Replace audio in MXF

Hi,
I need to know how to replace audio channels in an MXF (OP1a, IMX50 codec), and leave everything else untouched (video, timecode, etc)
Either with Premiere or with Media Encoder
Thank you!!

hello ,thanks for jour mail ,but my English is very very bad sorry but
many thank for your feedback. Hav a nice Day
Am 09.12.2014 16:57, schrieb carpmusic:
>
Replace audio in multiple video clips at one time
created by carpmusic <https://forums.adobe.com/people/carpmusic> in
/Premiere Pro/ - View the full discussion
<https://forums.adobe.com/message/6998981#6998981>

"iMovie doesn't lock the audio to the video - it's an old, old problem"

Lot's of people have had problems keeping long video clips in sync with their audio in iMovie. I think what this guy says is correct:
http://forums.mactalk.com.au/11/49711-imovie-hd-sound-out-sync.html#post608307
"iMovie doesn't lock the audio to the video - it's an old, old problem either you import in short segments so the sound doesn't get too far out of sync or you buy Final Cut Express - it does lock the audio to the video".
...and unfortunately I don't know of a way to import in small sections if you've recorded say 4 minutes worth of continuous footage.
(Come on Jobs get it together!)

You can replace your internal DVD drive, or get an external DVD drive.
Note: If your Mac had an internal drive, the Apple external USB DVD drive won't work with it. It's designed to be used only with Macs that don't have internal DVD drives, i.e., MacBook Airs, MacMinis, etc.

Is it possible to Replace audio in a video without re-importing and re-exporting ?

Similar Messages

Maybe you are looking for