Is it possible to Replace faxserver with SAP PI.

Hi,
Current scenario which is running:
ECC>Faxserver> Faxmachines
upgrade to PI by replacing fax machine:
ECC>PI>Faxmachine/Faxserver
We have to send the message by dialling to the fax machine..
Right now, the file/message is sent from ECC to faxserver which inturn dial to the receiver fax machine.
Now we got a proposal of replacing this fax server with SAP PI. Is there any way we can replace this fax server with PI by using some custom adapter?
Does anyone done this kind of scenario?
Is there any custom adapter module we can write to handle in PI instead of using Faxserver?
I think this is not possible to replace? Any suggestions please?
Thanks
Deepthi

Hi Abhishek,
Thank you. I will check about the webservice with the vendors.
Meanwhile we got few small vendors whom doesn't have any other option other than receiving orders through Fax machine. So I'm just wondering is there any way we can send messages directly to their fax machine from PI (may be using Mail adapter)..
I was going through below link and looks like there is a way by using mail adapter...?
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
Exchanging faxes and text messages (pager/SMS) using SMTP is also possible. For this, faxes and messages are packed as e-mails. For the send process, the mail server analyzes the domain of the recipient addresses and either forwards the e-mails to an internal fax-/text message server (for example SMS=491759628717 at sms-server.company.com) or to an external provider (for example FAX=16105954900 at fax-provider.com).
What do you think?
Thanks

Similar Messages

Replacing BC with SAP XI-URGENT

Hi Experts ,
I have a query related to a case in which we want to replace SAP BC with SAPXI.
The client is going for an upgradation from SAP R/3 4.6 c to ECC 6.0 and they have architecture like 4.6c--- BC-SAP Adapter--- Customized Adapters(Third party).
The customized adapters make synchronous RFC calls to 4.6 c through SAP Adapter and BC.
Basically MQ series flow is there between customized adapter and SAP ADAPTER which further updates R/3 through BC.
Now they want to upgrade from 4.6c to ecc 6.0 and replace BC with SAP XI without making any changes to SAP Adapter and customized adapters
Now my questions are :-
1) If i replace BC with SAP XI will there be any development changes required or it will be only configuration changes that can be done by BASIS?
2)Is it possible that Third Party continues to make RFC calls to XI and XI make RFC calls to R/3.
3) In XI we will be configuring JMS adapter for MQ series or MQ series adapter.
4) What difficulties can be faced during replacement of BC with SAP XI ? What can be the impact of replacement?
I would appreciate an early response as this is very urgent.
Regards
Saras Jain

> Hi Experts ,
> I have a query related to a case in which we want to
> replace SAP BC with SAPXI.
> The client is going for an upgradation from SAP R/3
> 4.6 c to ECC 6.0 and they have architecture like
> 4.6c--- BC-SAP Adapter--- Customized
> Adapters(Third party).
>
> The customized adapters make synchronous RFC calls to
> 4.6 c through SAP Adapter and BC.
> Basically MQ series flow is there between customized
> adapter and SAP ADAPTER which further updates R/3
> through BC.
> Now they want to upgrade from 4.6c to ecc 6.0 and
> replace BC with SAP XI without making any changes to
> SAP Adapter and customized adapters
> Now my questions are :-
>
> 1) If i replace BC with SAP XI will there be any
> development changes required or it will be only
> configuration changes that can be done by BASIS?
Only some parts of the SAP BC can be migrated to SAP XI like xslt mappings
refer this : https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503
> 2)Is it possible that Third Party continues to make
> RFC calls to XI and XI make RFC calls to R/3.
yes, 3rd party can make calls to XI and XI will make RFC calls to R/3 calls using the RFC adapter in XI.
> 3) In XI we will be configuring JMS adapter for MQ
> series or MQ series adapter.
you will have to configure the JMS adapter in XI.
> 4) What difficulties can be faced during replacement
> of BC with SAP XI ? What can be the impact of
> replacement?
>
Refer this for more info:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a8424011-0d01-0010-e19d-e5bd8ca52244
>
> I would appreciate an early response as this is very
> urgent.
>
> Regards
> Saras Jain

Is it possible to replace applet with JSP

I m working for the extension of the a Chat Application which is Applet based...
It is slow as the Applet loaded...
Is it possible to replace the applet with th JSP....
what r the pro and cons of it???
Thanks in advance...

sure it is possible.
main difference is, that applet maintance a permanten connection to the server and therefor has a 'smaller' communication where as with servlets/jsp the client will have to communicate more information for each request.
have a look at pushlets.com, a servlet based framework that keeps the connection to the client open (works with hidden frames and dhtml). very smart framework.

Is it possible to replace masters with versions without going through the process of exporting and importing?

Is it possible to overwrite the master files with the versions without having to go through the entire process of exporting and importing back the images?
Thnx in advance

A small refinement if you shoot RAW. Remember, no RAW file can ever be edited or rewritten. Thus, in the old days, the flow was:
RAW>TIFF/PSD and you ended up with two large files. (This is why some folks used to delete the RAW Masters.)
With Aperture the flow is something like:
RAW+Version(s) Only the Version is only 30 KB. (There is, of course, additional overhead of Thumbs and Previews, but, depending on your settings, this is only a fraction of the size of a TIFF or PSD.)
You question goes right to the heart of the concept of a non-destructive workflow. With Aperture you always preserve your original Master file; the only things that are ever at risk are your edits (called Adjustments). Ironically, this is even more valuable if you shoot JPEG or TIFF as those files could be rewritten.)
Aperture goes to great lengths to give you the best of both worlds; you always have the Master to revert to and your "edits" take up very little disk space. And you don't have to waste time trying to sync folders of RAW, TIFF, and JPEG. Similarly, you never have to worry about resizing images, changing color spaces, or any number of other things that get locked into an image file when you use a destructive workflow.
Remember, Aperture will happily Export files in any format you may need. Export 'em, use 'em, delete 'em - your Masters are still safe in Aperture.
DiploStrat

Possible to replace 30gig HD with a 60gig HD?

If I buy a replacement 60gig hard drive on ebay or whatnot, would it be possible to replace it with the hard drive in my 30 gig ipod? Would this be compatible?

but suppose the person selling you the house didn't know you had two cars
Who cares? It's irrelevant.

Replacing TAXINJ with TAXINN

All SAP Gurus,
We are having the TAXINJ at present.
But we want to replace it with TAXINN.
Shifting from TAXINJ to TAXINN will be planned from certain date, say 01.10.2008
But after assigning TAXINN, we should be able to view all old documents which were in TAXINJ.
Is it possible to replace TAXINJ with TAXINN?
Regards,

Hi,
You have to complete the PO's has there may be problems occuring from the tax codes.
At the time of Invoice verification you may get a message that the tax codes are not assigned TAXINN.
you have to create tax codes for taxinn procedure also.
You have to assign the procedure to country
You have to assign the excise default condition types for TAXINN procedure
You have to create tax codes for TAXINN procedure
Thanks & Regards,
Kiran

Replace EDI with XI-Webservices

Hi,
We currently have a scenario where we sendinf bill of lading information to the railroad for shipments going out of XYZ plant using EDI 404. Now our receiver party also have web services, and we want to use web services with XI. Is it possible to replace EDI with webservices?
What would be the approach? What information we should know from receiver party about thier web services?
How about security? Should we able to do it with XI-Webservices over the DMZ's? Any information on this would be very appricate.
Thank you,
Navin

Hi Navin,
Apart from the above threads go through this urls also which may give you some idea about your query:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/818a20be-0601-0010-e3b8-ac3d5f975319
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/135b0b94-0701-0010-f6a9-86a14057544a
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9f72e81d-0b01-0010-149a-81cc4803c773
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4f58802d-0a01-0010-e58b-d135f1b01dc5
Apart from this go through this urls which may help you:
ALE/EDI : IDoc Setup
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9c08451d-0b01-0010-f19b-f58712bb55d1
can u any body send EDi and XI materail
Regards,
Abhy

ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3

Hi,
we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA.
Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios with these Integration Plattforms.
My question is:
We are looking for are smart solution to get a SAP Test Environment, where we can test ALE/IDOC und RFC/BAPI Integration scenarios.
It is possible to do this with SAP DS for ESA v3 or shall we better use IDES for that purpose?
Best regards,
Steven

Hi Abhishek,
This is our scenario. We are doing an integration of SAP HR r/3 system with the CRM system. We need housing information details of the employees which we have in custom infotype 9310 in SAP HR system and we need those details in the CRM system. So am planning out for an ALE/IDOC approach for the integration and gonna maintain the 9310 details in a custom table. In the CRM system, we gonna build a BOL layer for accessing the 9310 details. Also i'm preparing a HLD for this process. I wanna read and go through few same HLD's before i submit my proposal to my client. Please suggest me and help me out.
Thanks in advance.
Regards,
Arunmozhi.

Replace words with images, in a table, using the search/replace tool

Hello everybody
I have a question:
Is it possible to replace words with images, in a table, using the search/replace tool?
My case:
I have a table with about 9000 articles on about 400 pages. In this table there are words which I like to replace with Logos.
Example: The word "DM" should be the Logo "DM" (.eps). This word is about 1200 times in this table.
Is it possible to replace it automatically?
Thank you very much for your helb.
Kind regards Alex

Hello Mr. Werner
Thank you for your reply.
Can I ask you which Version of InDesign do you use?
I use CS 5.5 and there I can't find the change field "other" you told me.
Can you see it on the screenshot? (Sorry it is german...)
Thank you very much for your support.
Kind regards Alex

Sms integration with sap b1

HI to all,
    can it possible if sms integration with sap business one. means if i create a/r invoice if i add the document automaticlly send sms to the customer in that sms following matter to be send
invoice number,posting date,due date,invoice amount.can it possible .if yes then what is requirement for that.pls reply i will waiting for your reply...
Regards,
vishal.

hi
1.Create class library in Visual Studio 2005 C# Express Edition create assembley SQLCore
Write code:
using System;
using System.IO;
using System.Text;
using System.Net;
namespace SQLCore
    public static class SMS
        public static void PlusSend(string Sender, string Recipient, string Message)
            string Destination = "http://www.text.plusgsm.pl/sms/sendsms.php";
            string Data = "?tprefix=" + Recipient.Substring(0, 3) + "&numer=" + Recipient + "&odkogo=" + Sender + "&termin=0&tekst=" + Message + "&godz=00&min=00";
            SMS.PostStringToURI(Destination, Data);
        private static void PostStringToURI(string URI, string String)
            byte[] Bytes = Encoding.UTF8.GetBytes(String);
            HttpWebRequest Request = (HttpWebRequest)WebRequest.Create(URI);
            Request.Method = "POST";
            Request.ContentLength = Bytes.Length;
            Request.ContentType = "application/x-www-form-urlencoded";
            Stream RequestStream = Request.GetRequestStream();
            RequestStream.Write(Bytes, 0, Bytes.Length);
            HttpWebResponse Response = (HttpWebResponse)Request.GetResponse();
            if (Response.StatusCode != HttpStatusCode.OK)
                string Message = String.Format(
                "POST failed. Response staus {0}.",
                Response.StatusCode);
                throw new ApplicationException(Message);
for your localization you have to find your own sms gateway.
2.Compile project .
3.Copy dll to C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn
4. Set SETTRUSTWORTHY on true using
ALTER DATABASE databasename SETTRUSTWORTHYON;
go;
[more info about SETTRUSTWORTHY|http://msdn2.microsoft.com/en-us/library/ms187861.aspx ]
5.Create Assembly for your dll.
CREATE ASSEMBLY SQLCore
FROM 'C:\Program Files\Microsoft SQLServer\MSSQL.1\MSSQL\Binn\SQLCore.dll'
WITH PERMISSION_SET = EXTERNAL_ACCESS
6. Create Procedure
CREATE PROCEDURE dbo.[PlusSend](@Sender nvarchar(max), @Recipient nvarchar(max), Message nvarchar(max))
AS EXTERNAL NAME SQLCore.[SQLCore.SMS].PlusSend
go;
7 .Fially execute using
EXECUTE dbo.[PlusSend]('SENDER'','PHONE NUMBER','Message')
Insert it in transaction notification.
Hope it helps.

Replace systemd with uselessd?

Hi,
I heard it's possible to replace systemd with uselessd. How can I do in Archlinux? Can I do either in archlinuxarm?
Thanks,

@xanb, there are essentially two directions this thread can move in. If you were to build, install and configure uselessd on your own systemd, work out some of its shortcomings, and then post your results here, I suspect you'd get a decent amount of positive feedback from like-minded people who prefer something different from the complete systemd suite.
If, however, you expect someone here to walk you through how to install an unofficial, mangled version of systemd you're going to get resoundingly negative feedback. Everyone here is tired of this "Fight the power!" crap with systemd. If you want to use an alternative to systemd then go for it---that's the beauty of Arch, and there are several other init/service management systems some hard-working folks have put together. But don't expect anyone here to hold your hand.

Replace #Missing with zero

Hi All,
Is this possible to replace '#missing' with zero with in a FIX Command in Calculation Script.
Thank you.
tvmk

The two ways to change this without distroying your database are
1. create a dynamically calculated member (call it account_zeroed) that checks to see if the account is #missing and returns a zero
Soemthing like IF(@ISMBR(myscenario) and Account ==#Missing)
0
Else
Account
ENDIF
2. Handle this in excel like it should be. If the user wants numeric zeros and they are using the classic Add-in then to get a numeric zero use (0) as your missing replacement. If smartview then use #numericZero

How To Replace LOVs With Buttons

Hi all,
can someone please advise if it is possible to replace LOVs with Buttons? Customer has a requirement to replace the LOVs with buttons in Compensation Manager to approve/reject the paysheet. This is for R12.1.3.
Many thanks
Amanda

Hi,
1) First create a new region of LOV type.
2) Then under flowlayout region, add lov action button. On its 'External LOV' property, give the path of lov region created in step1.
3) Right click on 'lov action button' to add 'lovActionMappings'.
--Sushant

Integrating internet pricing configuration with SAP portal

hi all,
Internet pricing configuration whic is a part of CRM is used for configuring products online. Is it possible to integrate it with SAP portal?
Thanks in advance
Ramanan

hi,
pls check the below links for reference:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/24396589-0a01-0010-3c8c-ab2e3acf6fe2
searchsap.techtarget.com/searchSAP/downloads/chapter-december.pdf
1)Learn to implement the reverse proxy filter and portal gateway in SAP Enterprise Portal 6.0 on Web Application Server 6.40.
https:/.../irj/sdn/nw-portalandcollaboration?rid=/webcontent/uuid/006efe7b-1b73-2910-c4ae-f45aa408da5b
.2 )Configuring the Portal for Your Reverse Proxy Filter Solution . ... This document describes the reverse proxy filter mechanism in SAP Enterprise ...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/32ad9b90-0201-0010-3c8a-c900cd685f8f
3)have full reverse proxy functionality. Possibly. filter. requests. Internet ... Reverse proxy (optionally with authentication etc.) ...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c066c390-0201-0010-3cba-cd42dfbcc8be
Note:please reward points if solution found helpfull
Regards
Chandrakanth.k

Can you replace iCloud with a local cloud?

I know that this is not Apple's plan, and I know that there's no easy way to do it.
However, is it possible to replace iCloud with a local cloud? I'd like to use my Apple Time Capsule or my WD My Passport wireless drive to store my iTunes, iPhoto and e-mail libraries, as well as to be the cloud that has my keyword chain, and other app syncing, like contacts & notes, for my Macs and IOS devices.
There are a number of reasons:
- I have several TB of storage
- It is much more secure as I can encrypt everything and have control of the physical storage devices
- It is more portable - I can take the cloud onto an aeroplane, or into the desert and it'll still work, unlike iCloud that needs a wi-fi connection
I can see other people would have the same requirement. If you have a business with sensitive data, for example, you'd not want it stored remotely, you'd want full control of all the encryptions, backup, access control and so forth.
Any ideas? It'd be great if one could simply change DNS so that icloud.com points to your own device, but I know it's nothing like as simple as that!

Try http://www.infogenra.com/how-to-setup-icloud-on-windows-computer.html
Allan

Is it possible to Replace faxserver with SAP PI.

Similar Messages

Maybe you are looking for