Is it possible to replace the front n back cover of iPhone 4S? External crack both the side no internal issues!!!

Hi can somebody help me give me proper information relating to broken iPhone replacement. I don't have warranty left now, I brought it from Basel Switzerland. But now m in india. My iPhone 4S is broken or crack on both the side front n back. There is no internal issues but just an external cracks at the front glass n the back black cover. How must will this cost without warranty in India? Where should I approach for repairing??? Please somebody let me know if it's possible to repair. Thank you

Possible, yes.
Will Apple do it, not a chance.
Apple does not replace the screen on the 4S. Apple will replace the entire device for the Out of Warranty repair cost but only in the country of origin of the device. In your case that would be Switzerland (or any EU country as EU is treated as a single country for warranty and support purposes).

Similar Messages

HT2837 Firewire ports on the front and back...

The Firewire ports on the front and back... do they share bandwidth, or are they distinct and separate cards such that I can get (theoretical) 400Mb off of either, 800 total?

2008, A1186, MacPro 2.8 Quad.
Has both FW400 and 800 on the front and back.
Question still stands though. Are the ports on the front sharing bandwidth with the ones on the back?
Chip Tredo

My front screen of my iphone 4 is cracked and if I bring it in to be fixed can I replace the front and back glass with a different color?

I recently dropped my iphone 4 and cracked the front screen if I brought it in to be fixed can I get both the front and back glass replaced with a different color?

No. They will not. The replacement will be identical to the old one. You always have the option of buying a brand new phone for the full retail price.

Is it possible to change my ipad-3 back panel as it has been damaged in the corners and how much does it cost me

is it possible to change my ipad-3 back panel as it has been damaged in the corners and how much does it cost me.

Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iCracked - Broken iPhone, iPod or iPad
http://www.icracked.com/
iReVamp Electronics Screen Repair ($99)
http://www.irevampelectronics.com/ipad-2-broken-glass-screen-repair.html
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
Do It Yourself iPad Reapir
http://www.ifixit.com/Device/iPad
 Cheers, Tom

Today my mac won't turn on at all...the light at the front is remaining on and at a constant brightness however the screen is still black! I'm not sure what to do next?

today my mac won't turn on at all...the light at the front is remaining on and at a constant brightness however the screen is still black! I'm not sure what to do next?

If you can log in blindly or using the flashlight method, it is possible your screen brightness somehow got set all the way to nothing. I don't have my Macbook with me right now to test it out but I believe it may not be possible to adjust the brightness at the log-in screen so you have to be able to log in first (though I could be wrong on that).

How do I see the front and back arrows on the left hand side of my macbook pro?

How do I see the front and back arrows on the top left hand side of my macbook pro?

Click "View' menu in the application menu bar select Show Toolbar
or
click "Customize Toolbar" and drag the arrows or "default set to the Toolbar".
Best.

Does the 1 year warranty cover a crack between the front and back casing?

Does the 1 year warranty cover a crack between the front and back casing?

No, I don't think so if it's through mishandling.

How do I bring form fields to the front or back?

I have a document with many form fields/push-buttons in order to create pup-up effects in an info graphic.
So I use fields to create a mouse-over hot spot, and others that pop up. Now, of course, the hot spot must be in front (or on top), otherwise it gets distracted in it's mouse-over function by the popped-up object (image) that lays over it. (The result would look like a flashing effect, as you roll over the hot spot.)
Now how do I arrange the fields?? Ich can arrange images and texts to come to the front or hide behind other objects. But in the form field editing mode there is no such option. Also it doesn't work to just cut and paste them, they re-appear in their former position, often behind the other fields.
Please, help! Thanks, Peder

Thanks, I will give it a try. To "recieve the focus" means being activated / hovered?
Am 22.04.2015 um 18:49 schrieb George_Johnson:
How do I bring form fields to the front or back?
created by George_Johnson in PDF Forms - View the full discussion
The tab order effectively sets the z-order, but if a field is not read-only it will be set to the front if it receives the focus.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7465780#7465780 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7465780#7465780
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in PDF Forms by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
···)····• Blixen
werbliche Kommunikation
Peder Iblher . Wichertstraße 16/17 . 10439 Berlin
Telefon 030 - 250 400 401 . Fax -409 . Mobil 0160 - 93 81 58 60
[email protected] . www.blixen.eu . www.facebook.com/blixen.eu

When I m going to move the front panel or a window for 3d scene instant hang the program.

When I m going to move the front panel or a window for 3d scene instant hang the program.
Υou can easily try to "generate sound" in the examples.
Can I overcome this? (without lock movement).
tnx
Giannis

Yes, I was right -- you have a single loop where you generate data points and display them. Consider the operation of your program if you do not display the data as a Chart, but instead simply display (as an indicator) the most recent value. The loop will go into your sub-VI, wait the appropriate time to generate a point, return, display, and immediately call the sub-VI again. Fine, it should run at the speed of the sub-VI.
Now add the Chart. Same thing happens, but now you move the Chart. The top-level routine, tasked with displaying the Chart, needs to use additional time to repaint the Front Panel, so it take it. Now when you call the sub-VI again, time has elapsed.
What you need to do is to run two loops in parallel, so-called Producer-Consumer Design Pattern. Have your sub-VI return a Waveform (not a Chart). This loop becomes the Producer -- all it does is "produce" a Waveform at whatever rate the sub-VI specifies. Create a Queue of Waveforms outside this loop, and enqueue the Waveform onto it. In a parallel loop (usually written below the Producer Loop), write the Consumer loop, into which you pass the same Queue. Here you Dequeue the (latest) Waveform and display it on the Chart.
Now, while this runs, move the Chart. The Consumer loop will be delayed (because you are refreshing its Front Panel), but the Producer loop, running in parallel, just keeps going, putting more points on the Queue. When the Consumer finishes its Front Panel update, it blithely plots whatever is on the Queue. If you look carefully at the traces being plotted, you should notice that when you move the Chart, the plotting temporarily stops, then the "missing" points are speedily plotted and plotting resumes at whatever rate it was before you moved things. This is the power of parallel processing and LabVIEW.
Bob Schor
P.S. -- there are examples of Producer Consumer patterns -- if you open LabVIEW and go to File, New, you should see some examples under From Template.

How much will it cost to replace the outer glass casing of an iphone 4 ?? but the touchsceen is working fine..!

how much will it cost to replace the outer glass casing of an iphone 4 ?? but the touchsceen is working fine..!

Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model
Out-of-Warranty Service
iPhone 5
$229
iPhone 4S
$199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone
$149
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax. "

Does Apple charge to replace the back of a iPhone that is cracked or damaged

Does Apple charge to replace the back of a iPhone that is cracked or damaged

Screen repair on the iPhone 6 and 5 are the only repairs where just parts are being replaced.
All other damages will be seen as "Out-Of-Warranty-Service" and you'll have to pay the service fee for getting the whole unit replaced, unless your device is still covered by AppleCare+
Screen repair service pricing
Repair and replacement costs depend on your iPhone model and your AppleCare product coverage. Apple will run a diagnostic test to determine whether your iPhone has experienced additional damage. If it has, or if it needs other repairs, you may need to pay an out-of-warranty service fee. Accidental damage isn't covered under the Apple One Year Limited Warranty.
Model
Screen repair cost
iPhone 6
$109
iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5
$129
Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing. Pricing and terms vary for service through an Apple Authorized Service Provider.
Out-of-warranty repair service
If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
Read Apple’s Repair Terms and Conditions
Model
Out-of-warranty service fee
Battery service*
iPhone 6 Plus
$329
$79
*available only if battery
fails Apple’s diagnostic test
iPhone 6
$299
iPhone 5s, iPhone 5c, iPhone 5
$269
iPhone 4s
$199
iPhone 4, iPhone 3GS, iPhone 3G,
Original iPhone
$149
Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
AppleCare+ for iPhone
Purchasing AppleCare+ extends the hardware coverage to two years from the original purchase date of your iPhone and covers two incidents of accidental damage, each with a $79 service fee plus applicable tax. AppleCare+ also includes Express Replacement Service so you can get a replacement before sending in your iPhone.

The front and back camera on my itouch second generation stopped working. Any thoughts on how to fix it?

The front and back camera on my itouch second generation stopped working. Any thoughts on how to fix it?

First, try to reset the device by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting.
If this does not work, set it up as new device again, explained in this article:
How to back up your data and set up as a new device
If still no luck, get it serviced, the issue might not be software related.
Apple - Support - Service Answer Center

Difference between front and back camera on iphone 4s

want to know the difference between the front and back camera on my new iphone 4s the pictures don't look the same the back camera seems to take a better picture than the one facing me.

Back camera is 8 mega pixels and allows more light. Front cam is not different.

My iPhone has my daughter's music but those same songs do not show up on the computer in the list of songs on my iPhone. They are in the library though

My iPhone has my daughter's music but those same songs do not show up on the computer in the list of songs on my iPhone. They are in the library though

Wondering if you haven't been bitten by the new "feature" of iOS 5, as was my son. turingtest2 explained it very well in reply to my own query about "missing" songs in playlists.
Here's that thread...
https://discussions.apple.com/message/16903613#16903613

How do I do to use the same appleid on all my devices, I want to use the last one I have on my Ipad mini, do I deleta the one I have on my Iphone and reeinstall it with the Id I use on my Ipad..?

how do I do to use the same appleid on all my devices, I want to use the last one I have on my Ipad mini, do I deleta the one I have on my Iphone and reeinstall it with the Id I use on my Ipad..?

Hi john,
Yes, you would sign out of iTunes & App Store: Settings>iTunes & App Store, click on the Apple ID, click on Sign Out. Then sign back on with the new Apple ID. Also, if you have an iCloud account with the other Apple ID, you would delete that iCloud account, and then sign on with your new ID: Settings>iCloud>Delete Account.
Cheers,
GB

Is it possible to replace the front n back cover of iPhone 4S? External crack both the side no internal issues!!!

Similar Messages

Maybe you are looking for