Is it possible to replay finished video without re-buffering?

Hello,
I have this problen when viewing streaming video.
Because of quite often buffering I am discouraged to view the streaming video in real time.
I prefer to wait until almost all video is played and then start playing it again from the beginning. This allows me to watch all video without interruptions.
However, when the video has finished playing (I was away from the computer) replaying the same video still requires buffering.
What should I do to avoid that?
Microsoft's Silverlight does not have that problem.
Thanks,
jas

double post by jastrzebiec...
there's a discussion in a thread posted after this one. please track in: http://forums.adobe.com/message/3984048

Similar Messages

Can I replay a video without Internet

Once I download a video, can I replay without Internet connection?

Yes - if you did in fact download the video to the iPad. For instance if you purchase a movie from iTunes - or a TV show - once the video has downloaded to the device - you don't need an internet connection to watch the video.

Possible to replay first-time startup video?

Hi all
Was wondering if it is possible to replay the startup video that plays the first time a new iMac is booted up. If so, how?
I found it on You Tube, but it's not the same and want to show someone else who missed the initial boot.
Thanks in advance!!
Message was edited by: chicagolawyer

chicagolawyer,
Welcome to Apple Discussions.
Here is a good link, which explains how to play the Intro Video
;~)

Is it possible to record a ipad video without sound?

Have tried everything, but unable to record videos without any sound.

I don't think you can. There's a low tech approach, put a piece of tape over the microphone. Might not cut it all but might mute it down.

Replay youtube videos

Hi,
Is there a way to look up a YouTube video on my iPhone and replay it? I don't have a large data allowance and at the moment, if I want to watch it again, I have to load the video all over again. It is not a problem unless the video completely finishes and moves on to the info screen, if I rewind it before it finishes, I have no problems.
How can I replay the video once it has finished playing, without having to redownload it?
Thanks.

Possible Solution to Firefox Hangs or Crashes.

Sound Volume on Finished Video not as Loud as in Editor

Hi, when I play my video back after it has been made into a video file. (it plays back in windows media player) it is a bit quieter than when it is played in the editor. This is a little annoying because I got the sound right in the ditor - so it is too quiet now. I used 2 was to boost the audiotrack - I used the Audio Gain option to boost the sound to a certain extent and for the rest I used the track volume slider in 'Sceneline' where you can adjust the volume for a whole track. I am wondering if only the 'Audio gain' part has come through to the finished video. Is this normal? Thank you for any help.
Rich

Rich,
It is highly possible that PE and WMP are using different settings on your audio sub-system. What are the Edit>Preferences>Audio Hardware setting for PE, and also the ASIO settings? I do not believe that WMP has a place to adjust any real settings that would affect audio - other than the slider on the control console.
To obtain the loudest audio possible, without (much) distortion, you can open Audio Mixer and ride the gain to where you are in the yellow below 0db for all peaks. Do not let the meters get to the red.
You might also have some luck with the Normalize Effect (Audio Effects) and choose 0db as the Normalization limit. You could also do the same in Audition, or Audacity.
In Audition and in PrPro, the meters have a nice feature - any peak that hits red, will trigger a light (a block of red) at the top for every play session. All you have to do is look at the meters when your done, and if there's a red light, some peak hit it. Watching the meters respond tells you the same thing.
Also be aware that YouTube will likely recompress your Audio and Video, so what you upload might not be what is posted. Then there is the problem that you have no control on how those, who view your piece, will have their systems set. A lot of variables to consider.
That is why I always mix to what I believe is the best level and leave it at that. I have no control over how my DVD will be played, on what sort of system it will be played, and how the viewer will have their system set up. Some believe that they should mix to the "lowest common denometer," which would be a 3" TV speaker. I mix to the best, and let the user figure it out.
Good luck, and please post a link, when done - I will remember to turn my system's audio down! [Grin]
Hunt

How to add an image to an imovie 9.0.4 video without stopping the video or audio

I am creating a video in iMovie 9.0.4 and I would like to add images to my video without interrupting the audio. I read online about a Cutaway option but when I followed the directions I was not given an cutaway option. Is there a way to do this?
Thanks!

Hi
Did You turn on Advanced Tools ?
First Choise possibly - Visa avancerade verktyg / Show advanced tools
TimeLine set to show ONE ROW of Clips.
Then take a photo (.jpg) and drop it ON TOP OF the Clip in TimeLine where You want it to be.
Now You should get a drop down Menu - Select Cutaway.
Done
in iMovie'13 (version 10.0.x) this is very different !
Yours Bengt W

Is it possible to embedding a video in Keynote and then play as a PDF?

Hi
Is it possible to embedding a video in Keynote and then play as a PDF? I want to do a PowerPoint/Keynote presentation that includes videos from YouTube. My preference is use Keynote although I do have Office 2004.
My issue is that the places where we present have their own equipment so we are encouraged to bring the presentation on a USB/portable HD, and they tend to be Windows environments.
In my perfect (ignorant) world, I'd
Create it in Keynote
Add/embed videos from YouTube
Save it as a multi platform file like a PDF
I guess the key issue is:
Is there a way to create a multi platform presentation with videos (I think Keynote and PPT require different video formats???) that can be carried on USB/portable HD?
Thanks

No, it's not possible without using hacks. And Adobe can't support or endorse hacks
Bear in mind that not only there are new features in a new version which can't possibly be recreated by an older version - also, there are enhancements to existing features, which would make them render differently in the two versions.
That said, there are people posting such hacks, as Sébastien pointed out.

Importing Video without Fire Wire

How do I import video from my Sony HI8 camera which is not equipped with fire wire. Is it possible to do this using the USB port and if so How. Thanks. I am a Newbee

If your Olympus software is incompatible with Mac, have you tried using a memory card reader to upload those photos? That's the great thing about Macs - you can usually do without the camera drivers and software,
Long story short, I do hobby underwater photography/video and my equipment,while it works fine, is 1990 vintage, bulky, and a pain in the butt to travel with. I wanted to up grade to a camera that was small, would do stills and video and had an underwater housing available. I settled on the Olympus 710 with the 1 gig XD card. Problem was that the salesman told me that it would download into my HP and I could use Windows Movie Maker to edit movies. WRONG! WMM uses .avi format the camera saves in .mov. WMM can't use .mov so i bought a conversion program which converted it to .mov.avi.I now have 3 conversion programs, none of which work and to tell you the truth I wanted to strangle someone. A buddy of mine has a MAC and said it was the answer. I connected my camera to his Macbook and it immediately downloaded the photos and video without Olympus software and I could use the video in Imovie. I am happy. Now I just have to solve the "old stuff" problem. This forum has been very helpful.

How can I add photos to a video without interrupting the sound of the original video?

In PE11, How can I add photos to a video without interrupting the sound of the original video?

RLHeflin
Thanks for getting your details posted. Good job.
You further explained
I am simply wanting to “overlay” a new visual element without disturbing the underlying audio.
A classical way to do a Premiere Elements Overlay is to hold down the Ctrl key of the computer main keyboard and drag the new clip over the area of the one you want to replace on the Timeline. That should not do anything but replace one portion of the video on the Timeline. No change in duration video or audio track if you are dealing with video linked to audio.
If you hold down the Alt key of the computer main keyboard, I am envising a scenario where you want to add to (not replace) some Timeline content.
A just in case note, if you have video on Video 1 and 2 and the video in 2 does not have transparent areas in it, then all you will see is the Video 2 content. I believe that Hunt eluded to that concept as a possible technique for what you might be doing.
Another just in case, if you have not seen the following Adobe documentation on arranging clips, you might be interested in the following link
http://help.adobe.com/en_US/premiereelements/using/WS9B8F8208-EAE8-4b49-A79B-9479B46A8981. html
Please update us on your progress when you get a chance.
Thank you.
ATR

I upgraded to PSE 10 and am not able to e mail my finished video.....I was always to send them off !

I recently upgraded to Photoshop 10 and find I am not able to e mail my finished video ????

HI JEFF...................YES I UPGRADED TO PSE 10........NOT PREMIER...............AND I JUST SOLVED THIS.........WHAT HAPPENED IS WHEN I COMPLETED MY SLIDE SHOW (WITH MUSIC)....(I LOVE MUSICAL SLIDE SHOWS), I ACCIDENTLY SENT IT SOMEWHERE OTHER THAN "MY VIDEOS".........(I STILL CAN'T FIND IT).............SO WHEN I REALIZED THIS; I DID THE WMV AGAIN AND CORRECTLY SENT IT TO MY VIDEOS FILE..SO ALL'S WELL BUT............NOW THAT I HAVE YOUR ATTENTION MAY I PLEASE ASK YOU ABOUT ANOTHER PROBLEM...........I NOTICE WHEN I SEND THESE VIDEOS OFF THAT ANY ONE VIEWING THEM CAN COME INTO MY LIBRARY SIMPLY BY CLICKING THE FOUR DOT SQUARE WHICH LOOKS LIKE THE TOOL TO ENLARGE THE VIDEO SCREEN.........IF YOU PLACE THE CURSOR ON IT IT READS........."SWITCH TO LIBRARY"...........I DID THIS AND REALIZED ANYONE VIEWING MY VIDEOS CAN GO INTO MY PICTURE LIBRARY AND POSSIBLY A FEW OTHER PLACES...................THIS DISTURBS ME.............CAN THIS BE CORRECTED?

Burned mov file of finished video as always but on playback there is a sudden loud audio feedback-type-buzz about a minute into program. Wisdom?

Burned mov file of finished video as always but on playback there is a sudden loud audio feedback-type-buzz about a minute into program. Wisdom?

Thanks for all your help and thorough answers. After trying several things
without success, I ultimately just rebooted the system and...bingo...the
problem went away. It was such an unusual problem that it just didn't occur
to me that it would be that simple. Sometimes it isn't. I appreciate your
working to help me deal with this.
Keith
On Wed, Aug 6, 2014 at 12:45 PM, Kevin Monahan <[email protected]>

Can i stream/see to my Apple TV any Video without Audio?

Can i stream/see to my Apple TV any Video without Audio? I mean that i want see any video on Apple TV, and listen a sound on my iPhone via headphones. How i can do that? Think that this function can be very interesting for everyone.
Thanks

Unfortunately that isn't possible.
If you have any suggestions that you think might enhance the Apple TV you can send Apple your feedback here

A middle ground between finished video and project file?

I never thought I would see this day, but my hard disks fill up like nothing. I simply cannot save all these projects. Once I have exported them to the one format I need at the moment, I delete all the source project material (videos, images, music files, project files, etc.) and simply leave the finished video. This might work at the moment, but what if I later want it in a different format? I'd lose data.
Is there such a thing as a standard, compressed, LOSSLESS format for this purpose? Like an "archival video" format, from which I can produce "end user" videos? That is, "ONLY save what is actually included in the final video, but 100% lossless."

ZIP squeezes files using an algorithm. Video is already heavily compressed right out of the camera and usually with a much better, much tighter, algorithm. It can not be further compressed without loss. That is just a fact of life for video people.
I never get rid of source material. Now that I am using a DSLR to shoot, I save everything to a hard drive, and then I make external backups to protect it. It was easier when it was all on tape. I just bought boxes of tapes. I am not inclined to buy boxes of SD cards.
The solution is to buy more hard drives. You can fit many many hours of video on a 2TB drive. If you live in the USA you can easily find 4TB drives for a mere $199 (frys.com). I remember clearly when I bought a HUGE 120MB hard drive (to replace my 104MB drive) for only $325. Boy, that was a steal at that time.
If you are a professional or a serious hobbyist, $199 is a drop in the bucket compared to the cost of your camera equipment. If you are a poor hobbyist, then I feel for you, but there really isn't anything that can be done. Get a second job shooting weddings maybe? Find a great band and create great music videos that go viral and ride their coattails? Sell your blood? Mow lawns? I don't have an answer for you. The only answer is spend money.

Running Firefox 35. Unable to load pages or view videos without moving mouse.

Running Firefox 35. Unable to load pages or view videos without moving mouse.

A possible cause of this issue is the presence of malware on your computer.
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

Is it possible to replay finished video without re-buffering?

Similar Messages

Maybe you are looking for