Is it possible to replicate groups in different designs?
I am trying to create a circuit layout template for a set of components which needs to be replicated across a lot of designs. This could be considered similar to the functionality of the 'Group replica place' and 'Copy route' functions but applied across different designs.
I have tried manually copying layouts to a new project but as soon as they are copied they do not get recognized because they are not included in the netlist. Additionally if I try to back annotate from a copied design to Multisim in order to force a netlist creation I get: 'The layout part XX has no corresponding schematic component. Select a component from the database.' and if I try to assign a component from the schematic database I get: 'There are no possible partner objects to select.'
Is there any simple way I can preserve a layout of a subcircuit and inserting it into to a different layout?
Hi,
I think the best way is to copy the schematic part that you need towards your new schematic.
But you should do this first before adding other parts to the new schematic.
this way you'll be able to keep all the refdes the same.
before taking that schematic to Ultiboard, copy the desired layout and components (and vi'as, copper areas etc) to your new layout,
then import your new netlist.
I think that should work (I've done this before on small designs.)
The only thing to check are the copper area's that are linked to specific nets, they might need to be reassigned...
Good luck!
Similar Messages
-
Is it possible to create group above report between to different data model
Hi,
I am having one problem.. I am working on Bi publisher 10...
I have to create 2 different data models.. which i have done successfully.... its showing xml data perfectly.. but my problem is i want my 2nd data model to be dependent of 1st model...
when i am designing my template ... i am not able to create a group by report..
i want my report like this ...
------------------------------------------------------------ (fetching data from first data model)
abc xyz pqrs
--------------------------------now their it must show the data from second data model... dependent on first model...
simply i want to know is it possible to create group above report between to different data models..Thanks for your response..
I already tried this.. But its not working ..
i want parent information from data model 1
then all detail information related to parent template ...from data model 2..
but its not working.. its giving me all parent informations first then all details informations.. -
Is possible to see group currency data in SAP provide report or query ?
Dear experts:
Is possible to see group currency data in SAP provide report or query for Assets. When the Depreciation area currency is different with the group currency?
My SAP version is ECC 6.0.
Depreciation area currency: USD,
Company code currency: USD,
Second local currency: Group currency(TWD)You must have defined an additional dep area for group valuation too.
then only you can get the asset values in TWD curency. -
Availability Groups with different collations ??
Hello,
Is it possible to create several Availability Groups with different collations ?
I want to use a common SQL infrastructure for System Center.
Thank you.
JérémyDo you mean that two nodes will have different collation? Try to avoid it,one example if your stored procedure uses JOin with a temporary table on the columns that are declared a varchar for example so you would get an error because. A tempdb has a different
collation as your database has A tempdb gets collation while you install SQL server but you may create your database with different than server has collation.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
Pushing Updates by group at different dates.
Hey all,
Hopefully this is a simple question, but the disclaimer here is that I am fairly new to InTune. In short, we already have a policy set up so that critical updates are auto approved and pushed to workstations.
For security updates/rollups I would like to do this:
Approve xx number of updates and push them to a test group in InTune
Wait one week to test for any issues caused by the above bullet
If no problems, take these EXACT updates previously approved for the test group, but apply them to our local office
Wait one week to verify no issues
If no problems, take these EXACT updates previously approved for test group and local office and apply them to our various remote offices.
My problem is that I am not exactly sure how I can find the EXACT updates that I previously approved the week prior when deploying them to my test group. This is our patching policy for the company so I cannot adjust the above steps. Can anyone advise on
how to simply accomplish the above? The break down is that this was previously managed by a person no longer with the company and there are random declines/approvals for updates all over so it's really tough for me to (right now) keep track ... hopefully the
above is clear. If you have any questions, please feel free to ask otherwise thanks for the help!
-RyanRyan,
Here is the problem with Exact -- lets say update KB1111111 was released on Jan 1, 2014 at version 1.0
You test deploy that update to TestComputerGroup by approving and setting a deadline of Jan 5 2014.
You run a update report on TestComputerGroup on Jan 7th and see all computers in the group successful.
Now you wait until Jan 14th and having heard no problems schedule the update for ProductionGroup2 with a deadline of Jan 20th.
There are is a few areas areas of concern for EXACT, but it really boils down to this:
You need to remember that you don't have a local "cache" of updates that you manage, the updates are pulled down by the client directly from windows update (with the possibility of some internal corporate caching system like BranchCache)
What are the rules for if an update is revised that would or would not require an explicit approved by the intune admin
Can you get a report that shows update status WITH update revision data
If you are international, you might also have regional windows update repository issues. If for example a client located in china pulls from a different windows update set than a if the same computer was in USA.
I am not 100% sure on what the rules are for #1, and I have not seen a report on #2.
As far as management of updates to different groups at different times, that is there as I described. But it depends on what you mean by EXACT.
-Neil
neilgo -
Function Groups of different package in ECC 6
Hi,
I am facing a very peculiar problem with using an Include in two different function groups in different packages.
We are moving from R/3 4.6C to ECC 6.
Now FG1 in PKG1 has an Include1 which uses a <b>parameter defined in a function module</b> in same packge PKG1. Its works fine.
And FG2 in PKG2 also has this include1 defined in main program. now when checking the FG2 it reports an error message in that include at that parameter, which is defined in the interface of function module defined in FG1 .
Now whne I read the documentation of a Pacakge it tell me that some visibility and use access concepts has been introduced. Please check the same and tell me if this error could be because of that.
Also To add here taht when i double click on the parameter in FG2 it takes me to the function module which has the defination however still throws an error.
And when i try to simulate similar thing in my own Z packges even the Doble click forward navigation doesn't work.
thanks in advance.
regards,
Vikas<b></b>
Message was edited by:
Vikas TanejaHi Vikas,
CAn you tell the names if they are standard FM and includes.
Regards,
Atish -
Is it possible to linking cell in different file? Like Excel can do.
Is it possible to linking cell in different file? Like Excel can do.
No, not supported. Maybe next version...
Jerry -
Design: different AP Groups for different SSIDs?!
Imagine I have different requirements for the AP Groups for different SSIDs
I suppose I can't have different AP Groups for different SSIDs?!
Imagine I have to many Clients to use one single VLAN for one SSID. So I will use AP Groups.
For SSIDâXâ
Let's say I have 5 buildings with 800 Users, so I make a AP Group per Building and tell those APs that they are in that group.
For SSIDâYâ
All though I have this SSID also in all 5 buildings, I only have very view Users, so I could make one single VLAN which makes everything easier.
Am I obligated now to create 5 VLANs for SSIDâYâ too?!
*This is a made up example. In reality I would make different numbers of AP Groups for different SSIDs because I have significantly different number of Clients⦠and traffic characteristics (more or less broadcast).
But it's also about the size of the VLANs, do I make a view large Broadcast Domains (VLANs) or more small ones.
Greetings, AndiYou can have a setup like this if you want:
AP Group 1
SSID X Vlan 10
SSID Y Vlan 21
SSID Z Vlan 31
AP Group 2
SSID X Vlan 10
SSID Y Vlan 22
SSID Z Vlan 31
AP Group 3
SSID X Vlan 10
SSID Y Vlan 23
SSID Z Vlan 32
AP Group 4
SSID X Vlan 10
SSID Y Vlan 24
SSID Z Vlan 32
AP Group 5
SSID X Vlan 10
SSID Y Vlan 25
SSID Z Vlan 33
AP Group 6
SSID X Vlan 10
SSID Y Vlan 26
SSID Z Vlan 33
Here is a link, which you probably already saw.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml -
Account assignment group is different in Intercompany Billing from Material Master
Hello,
Account assignment group is different in Intercompany Billing from Material Master.
Account assignment group in Billing and Intercompany Billing is feched from Material Master.
In Material Master, account assignment group is assigned as 12.
In Billing, account assignment group is 12 but in Intercompany Billing, account assignment group is 13.
Please help me to understand why in Intercompany Billing, account assignment group is 13.
Best Regards,
Debashri DuttaCheck the table MVKE for the values maintained for field KTGRM. You can see the sales org-DC combinations for which the AAG is maintained as 13 for this material. This may give you clues for investigation.
-
Can CSS115XX have 2 service group with different upstream?
Hi,
Just to ask if CSS can support the architect that 2 service group with different upstream.
It seems if I set a default route then I can have only one upstream routing path.
Thanks.you can configure mulitple gateway/upstream.
The CSS by default select the correct route....the one that corresponds to the inbound request.
So, if request came in from upstream-A the response will be sent through that same upstream.
This behavior can be modified with the following command :
CSS11503-2(config)# ip ecmp ?
address Choose among alternate paths based on IP addresses
no-prefer-ingress Do not prefer the ingress port for the reverse path
egress
roundrobin Alternate between equal paths in a roundrobin fashion
CSS11503-2(config)# ip ecmp
Gilles. -
Is it possible to replicate NT to a solaris platform and vice versa.
Is it possible to replicate solaris to an NT system and vice versa.If so, what is the best soultion. Please advise.
Hi,
I'm not able to understand your question, can you elaborate on your problem so that I can provide you the best of solution.
However, if you mean, replicating iAS on NT with iAS on Solaris, then, replication is not possible. But there are other methods to adopt.
Regards
Ganesh .R
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support -
Possible to replicate cn=schema between masters that don't share a LDBM?
I have multiple directory servers in my environment. One set has suffix A, another set has suffix B and a 3rd set has suffix C. I would like to replicate just the cn=schema between all of the masters for consistency reasons. Is it possible to replicate cn=schema between masters that don't share or replicate a user created database with each other?
These servers are DSEE 6.3.1 and are all controlled by the same DSCC.
Thank you,
MattI already know how to manually copy the 99user.ldif file to all of the servers. I am trying to get away from having to manually copy schema changes between servers every time a new attribute or objectclass is added to one set of servers.
Is there a way to replicate the cn=schema DIT alone? -
****Is it possible one sold party has different ship to party how?
****Is it possible one sold party has different ship to party how?
Please try in your system and update here
G. Lakshmipathi -
Is it possible to connect to two different clusters?
Hi,
I was wondering if it was possible to connect to two different clusters from the same process?
What I would like to do is to able to get some cache on the first cluster and others on a second cluster. The cache-config DTD doesn't seem to forbid the definitions of several remote-cache-scheme. So I should be able to map all "c1-*" caches to the first cluster and all "c1-*" caches to a second cluster...
Is it possible?Thanks,
Yes I'm connection via extend.
Could you give me an example of such configuration? I've made a test from a C++ client with the following client config:
====================================================================
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<caching-scheme-mapping>
<cache-mapping>
<cache-name>c1-*</cache-name>
<scheme-name>extend-1</scheme-name>
</cache-mapping>
<cache-mapping>
<cache-name>c2-*</cache-name>
<scheme-name>extend-2</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<near-scheme>
<scheme-name>near-c1</scheme-name>
<back-scheme>
<remote-cache-scheme>
<scheme-ref>extend-1</scheme-ref>
</remote-cache-scheme>
</back-scheme>
<invalidation-strategy>auto</invalidation-strategy>
</near-scheme>
<near-scheme>
<scheme-name>near-c2</scheme-name>
<back-scheme>
<remote-cache-scheme>
<scheme-ref>extend-2</scheme-ref>
</remote-cache-scheme>
</back-scheme>
<invalidation-strategy>auto</invalidation-strategy>
</near-scheme>
<remote-cache-scheme>
<scheme-name>extend-dist</scheme-name>
<service-name>ExtendTcpCacheService</service-name>
<initiator-config>
<tcp-initiator>
<remote-addresses>
<socket-address>
<address system-property="tangosol.coherence.proxy.address">ldnpsm020001413</address>
<port system-property="tangosol.coherence.proxy.port">4321</port>
</socket-address>
</remote-addresses>
<connect-timeout>10s</connect-timeout>
</tcp-initiator>
<outgoing-message-handler>
<request-timeout>5s</request-timeout>
</outgoing-message-handler>
<serializer>
<class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
</serializer>
</initiator-config>
</remote-cache-scheme>
<remote-cache-scheme>
<scheme-name>extend-paul</scheme-name>
<service-name>ExtendTcpCacheService</service-name>
<initiator-config>
<tcp-initiator>
<remote-addresses>
<socket-address>
<address system-property="tangosol.coherence.proxy.address">ldnpsm020001412</address>
<port system-property="tangosol.coherence.proxy.port">4131</port>
</socket-address>
</remote-addresses>
<connect-timeout>10s</connect-timeout>
</tcp-initiator>
<outgoing-message-handler>
<request-timeout>5s</request-timeout>
</outgoing-message-handler>
<serializer>
<class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
</serializer>
</initiator-config>
</remote-cache-scheme>
</caching-schemes>
</cache-config>
========================================================================
if I do a CacheFactory::getCache("c1-Test"), the log shows a connection to the 1st cluster
if I then do a CacheFactory::getCache("c2-Test"), the log shows a connection to the 1st cluster and not to the second cluster
What did I do wrong? -
Is it possible to replicate the home screens from an ipad to an iphone?
is it possible to replicate the home screens from an ipad to an iphone?
Not really, as the iPad has more screen real estate & can thus show more icons, 24 vs 20 for the iPhone.
Maybe you are looking for
-
Routine - get char 2 to 5 from the source value
Helo friends, I have a requirement like below i have a char and data type is numeric(5) and value of the char is A1234 now i need to load the data to DSO with value 1234 , since its datatype is numeric and i have to ignore 1st value i.e. 'A' so, i h
-
I cant get voice over to work on my 4G shuffle it clicks off every time help plz
i need help plz it wont work
-
"cannot find Arial MT font" error
I have Windows 7 and Adobe 11... Having a problem with some documents saying "cannot find Arial MT font"... some parts of a document will just have dots. I didn't have this problem w/Windows XP & older version of Adobe. I've gone back to Adobe 9.5
-
I can hear caller but he can't hear me except on hands free and speaker phone
I can hear caller but he can't hear me except on hands free and speaker phone, hoew to fix this problem
-
Forgot Username and Password for Blackberry email interface
I have a Curve 8330 that a friend gave me. When I tried to begin to have my email accounts sent to the blackberry it said I needed the username and password. The problem is she forgot them. Can it be reset?