Is it possible to resize the bar ruler in Logic 8?

In Logic 7 I was able to increase the size of the bar ruler, but in Logic 8 this function appears to have been overlooked. With my large monitor, the bar ruler in Logic 8 is TINY and it strains my eyes something awful. Plus, it takes a really steady mouse hand to set the cycle locators or the play head.
Does anyone know of a way to resize the bar ruler? Or do I have to cross my fingers and wait for an update?

Hi Alby,
I thorouhly agree with you. Resizing the bar ruler was a nice feature that's been overlooked. Moreover clicking on the right or the left of the green cycle locators doesn't not switch it on or off as it used to be in Logic 7. I have to use " / " key to do it now.
And worst thing, L7 and L8 have inverted mouse scrool wheel zooming direction with <cmd>+<opt> on the bar ruler. And no way to configure it.

Similar Messages

What is this little grey box in the bar ruler of Logic Pro 9?

What is the little grey rectangular marker above and to the left of the green triangle? It moves around like an auto punch or loop marker. I think it was causing my project to export a 17 minute long mixdown when the audio files end after about four minutes so I want to get rid of it. Thanks.

You can not get rid of it!
[sic]
<The Project End display shows the total number of bars or time. It behaves as stop playback/recording marker for the project.>
<|>
Cheers!

Is it possible to copy the SoD rules in the same system to diff. Rule SetId

Hi all,
We have created SoD rules as per our business requirement in RAR 5.3 Component connecting to the QA system. We want to copy the same rules into another different RULE SET for the same QA system. Is this possible?
Ex: ABRULE SET - Tailored as per Business Requirement and generated rules linking to QA system [Manually configured the SoD rules].We will use this Rule set for our Production System as it was frozen as per the Business Requirement (This we will do by establishing another JCO to production system)
We wanted to copy the entire SoD rules of ABRULESET to another rule set say YZRULESET. This YZRULESET we will use for making any configuration changes in future before making changes to ABRULESET which will be connected to Production System.
Is it possible to copy the SoD RULES from one Rule Set ID to another Rule Set ID within the same system? If yes, please provide us the procedure on how to copy the rules of one Rule set Id to another Rule set ID.
We explored the options of Export & Import Rules but no where it asked for new Rule Set ID for copying.
Thanks and Best Regards,
Srihari.K

Here is a method I've seen a few customers use, which seems like a good idea:
- load the standard rule set
- create a new empty rule set
- create your risks in the new rule set ( initially this could be a re-import of the risks, risk_desc and risk_ruleset files with a few changes done in excel to change the IDs)
This means you have an exact copy of the SAP standard risks in your own rule set, using the SAP functions.
Even if you have to define your own risks, there's an enormous value in the functions. The identification of TCodes and objects that do similar business transactions is probably the most difficult thing to reproduce on your own.
Now, whenever you have to change a risk (risk level, description, owner) you do that in your own name space
If you have to change a function (modify objects, add custom TCodes), you COPY the function to your own name space and change the risk in your name space to use the changed function.
If you want to be smart, you do all your own stuff in copies of the text files that come with the support packs (i.e. not in rule architect). That may not be an option if your compliance requirements want you to use the change history or automatic workflows that RAR provides, but if you don't need that, here's the advantage of this:
When a new set of rules arrives every few months, you delete your rules with a deletion script you can get from SAP support, upload the standard rule text files, upload your own text files, and you're set with your own rule set that makes use of SAP's latest updated functions.
This is (currently) basically the only way to automatically apply SAP changes without doing it manually, thus leveraging changes to functions by SAP.
All your changes will be in your own text files, which you can document and version control according to your requirements.
Not exactly the way according to the manual, but an interesting concept worth considering.

Is it possible to resize the legend box?

I am using Crystal Reports 11.
I created some charts.
I found it was difficult to resize the legend box, e.g. increase the width.
Is it possible to resize the legend box?
Thank you in advance.

Hi,
The Legend cannot be 're-sized', it can only be 'moved'.
You may create this as an Enhancement at https://ideas.sap.com.
-Abhilash

All of a sudden all of my tracks are squeezed to the left. The Bar Ruler begins at "1" with the next measure at "129" on to the thosands. How do I get back to my original count and un-squeeze my tracks? thank you. John

All of a sudden all of my tracks are squeezed to the left. The Bar Ruler begins at "1" ith the next measure at "129" on to the thosands. How do I get back to my original count and un-squeeze my tracks? thank you, John at [email protected]

Welcome to Discussions - the fact that the S.M.A.R.T. status is not recognized and the flashing questions mark appear seem to indicate that your hard drive has failed. If you have access to TechToolPro or Disk Warrior, try to use them to check the drive status. This will likely not work, and I'm afraid your disk is toast.
You could try to remove the drive and put it in an external case and try to mount it on your MacBook, but I don't hold out much hope for that either. You can try using [Data Rescue|http://www.versiontracker.com/dyn/moreinfo/macosx/211375] to retrieve your data.
You can also take it in to Apple and see what they say. Please let us know how things turn out,

How to get SPL to snap to beat bar or other when clicking in the bar ruler

Been using Logic so long it hurts to ask. All of my settings got trashed moving to a new system.
I want to click in the bar ruler at measure 60 and have the SPL snap to 60 1 1 1 and not 60 1 1 .45 or 59 4 1 1 etc.
Logic never did this fractional snap to before. How do I fix it?
Thanks

Try installing https://addons.mozilla.org/en-US/firefox/addon/searchreset/ to reset your search providers.

Is it possible to resize the partitions without losing data?

I have following issue:
I have dual-boot Arch with Windows XP. I created 4 partitions: 40GB XP's system disk (ntfs), 80GB ntfs data disk, 1GB swap and 25GB Linux partition.
But I am running XP so rarely, that it is frustrating, that I have most of my data on ntfs partition... I'd like to wipe out that 80GB ntfs, resize the system ntfs partition up to for example 60GB, and add the remaining 60GB to my linux ext3 partition (because I'm running out of free space recently...).
Has anyone done something like this, and how safe it is (if possible at all)
Yes, I have read this: http://wiki.archlinux.org/index.php/Res … _partition, and a few more.
I just don't have time to reinstall both systems (especially I would not like to install Windows, because I'd rather install Vista from my recovery disk, than hack the XP to work again...), and if some issues are likely to appear, then I'll give it up for now .

It's trivial using gparted, but as with any similar operation, you run the risk of losing data - so you'd better backup.

Itu00B4s possible to change the Distribution rules for a order type RM01 ??

Hi Experts:
I need to change the settlement rule which is automatic created at the moment that you create a Cost colector (class order RM01) transaction KKF6N..
but when I go into KKF6N transaction and I select the "change" option and after that I go into settlement rule screen, I can´t change the distribution rule.
I would need to change the settlement type from "PER" value to "TOT" value.. It´is possible in this kind of Cost colectors??
Thanks and regards!
Manuel

Hi,
Please note that you will not be able to change manually the settlement rule for a cost collector.
When you save, the system creates a settlement rule for the product cost collector.
The settlement rule for the product cost collector always specifies the distribution rule "100% to material" and the settlement type is always PER (periodic).
Also refer the note 388457 in which one of the paragraph it says "As of Release 4.5, a special settlement rule is generated when you create a product cost collector (with procedure 5: delivery value for product cost collector). You cannot subsequently change this settlement rule".
regards
Waman

Is it possible to resize the row / column of a table at run time ?

Hello All ,
I want to make a table where the user have to put datas . But if some data exceeds the length of the column / row the user should have the ability to resize the column / row of the table just like we are able to do at the time of designing . Is it possible ??
Thanks .
Bibhu .

Hi,
If you select a cell in the table that cannot receive data, then the expand to fit will not be available.
However if you select an object that is in the table (like a textfield) then the option of expand to fit should be available.
Try experimenting with the options.
Niall

Is it possible to bypass the Default rules in a task?

Hello,
looking at a article on the internet on how to configure PO Release workflow. I configured my system( IDES) to create new PO Release workflow accordingly.
I am able to create a new PO and based on the configuration the Release strategy is displayed in the PO screen.
The STD PO RELEASE workflow WS20000075 provided by SAP is is activated and agent assignment is done in the configuration.
So as soon a PO is created the workflow is triggered and the workflow errors out. It does not send any workitem to the recipient. I tried to diagnose the workflow and the issue is with the default rule which gets triggered to determine a AGENT. The default rule triggers the FM ME_REL_GET_RESPONSIBLE
to determine the agents and it is not able to determine the agent.
Any idea what is missing or how to bypass the default rule defined in a std task?
Regards
Chky

Hi Imthiaz,
I implemented the OSS Note and deteted the entry in SWEC as suggested in the OSS Note. But after deleting, The event is not raised at all. I did a comparison of SWEL trace before and after deleting the record.
Anyways i put back the SWEC i deleted from the system. When i tried to dig further in the issue i realized that when i check the trace in SWEL it gives me a error message
Import container contains errors (are any obligatory elements missing?)
Then i checked back to see if all the Bindings are fine from Workflow to Task and From Task to the default Rule and all seems to be fine.
Not sure why still i am getting the error as mentioned above.
Also I tried to Test the workflow from SWDD transaction and passed the PO number and the Release code in the testing. The workflow Error's out. When i check the workflow log it just stops at the first step.
Any idea what next i should try?
Anyways thanks for your help. Appreciate that !!
Cheers
Chky

Is it possible to resize the children of a viewstack(coverflow)

I am using a coverflow component which extends a viewstack: http://dougmccune.com/blog/2007/11/03/coverflow-flex-component/
I can add children (canvas with an image) fine by explicity setting the width and height of the canvas. Then i can align the children in the centre of the canvas.
However if i specify a different size of canvas when adding a new child all the previosuly added children become unaligned.
So is there any way to resize the children of a viewstack? Or does anyone have any other solutions?
here is my add child code:
var tmpchild:Canvas = new Canvas();
//These can't be changed without un aligning other children already present in the viewstack
tmpchild.height=170;
tmpchild.width=170;
var tmpimage:Image = new Image();
tmpimage.source=imageSource;
tmpimage.horizontalCenter=0;
tmpimage.verticalCenter=0;
tmpchild.addChild(tmpimage);
tmpchild.verticalCenter = 0;
coverflow.addChild(tmpchild);
Thanks

I don't believe so. Changing the parent container will directly effect the children of that container.

Is it possible to resize the albums on itunes 11

i am trying to resize the albums in itunes but cant find that little slide button at the top

I found out a way to resize the album artwork in windows. Hold down Ctrl-S then click the album artwork and you get the old resizeable artwork which you can resize to your liking by draging the lower right corner of the artwork window that pops up. Not sure if something similar will work in apple iOS.
I am using iTunes 11.1 on a windows 7 machine.

Is it possible to resize the Menu Bar and other toolbars to make them smaller vertically?

With the update to Firefox 4 my menu bar and toolbars are now taking up significantly more space than they where previously - is there any way to resize them so they take up less space?

Thanx, I had searched for "compact themes" and didn't find all of those for some reason (may have been a typo in the search field... I do that sometimes... =/ )

Is it possible to resize the log and capture window?

Hi,
Using Final cut pro, I would like to make my capture window a bit bigger while capturing. I am capturing footage via my Blackmagic Infinity card and get the input through an HDMI cable. I'm capturing in Apple Pro ress on 720p, 59,59 fps.
For a good overview of what I'm capturing at the moment, I would love to have a bigger capture window. For all I know, FC pro doesn't support the resizing of the log and capture window. Anyone an idea on how to solve this?
Thank you.

In my case, the capture window is adjustable if I am capturing SD (DVCAM) video. I can also use the scopes in this case. (Good if you are recording to disk, or using a laptop for monitoring.)
However, both features (adjustable capture window and scopes) are not available if capturing HD (HDV in my case) video.
Message was edited by: amarasme

Is it possible to resize the header and footer on a webpage before you print the page you want the print?

It seems to me the header and footer on every page I want to print is so darn small. If possible I'd like the header and footer size in Firefox to be close to the size of my other browser, Microsoft's IE8 browser.

Glad I could help.
But not all of us are gentiles.

Is it possible to resize the bar ruler in Logic 8?

Similar Messages

Maybe you are looking for