Is it possible to restore a datafile after opening the db using resetlogs?

Hi Experts,
We have cloned the db and after opening the db with resetlog option we came to know that one of the user db file is not part of the db and is showing the below error while checking the status and attempting to online it. When checking the size and availability of the dbfile it shows everything without errors.
SQL> alter database datafile 50 online;
alter database datafile 50 online
ERROR at line 1:
ORA-01122: database file 50 failed verification check
ORA-01110: data file 50:
'+DATA/orcl/orcldata.291.730828357.dbf'
ORA-01251: Unknown File Header Version read for file number 50
Thanks,
Newbie

user7490278 wrote:
Hi Experts,
We have cloned the db and after opening the db with resetlog option we came to know that one of the user db file is not part of the db and is showing the below error while checking the status and attempting to online it. When checking the size and availability of the dbfile it shows everything without errors.
SQL> alter database datafile 50 online;
alter database datafile 50 online
ERROR at line 1:
ORA-01122: database file 50 failed verification check
ORA-01110: data file 50:
'+DATA/orcl/orcldata.291.730828357.dbf'
ORA-01251: Unknown File Header Version read for file number 50
Thanks,
NewbieI suggest you review what was done, determine where the mistake was made,
then clone the DB again; but this time don't make any mistakes.

Similar Messages

Is it possible to restore to ios5 after updating to ios6 when my phone returned to locked state to unlocked state. Pla help...

Is it possible to restore to ios5 after updating to ios6 when my phone returned to locked state to unlocked state. Plshelp...

Sounds like your iPhone was hacked/modified/jailbroken to work
with wireless carrier other than the one it was purchased from. The
update has relocked it to the original carrier. Contact the original
carrier to see if they offer unlocking and if you qualify - only the
carrier to which the iPhone is locked can unlock it.
What does it say when you look at Settings=>General=>Carrier?
Be advised that the previous modifications to change from original carrier
to your current Carrier may have rendered the software unable to be
officially unlocked and may prevent future updates.
Reverting to a previous version of iOS is not supported. Even it it was,
such reversion would not solve your problem because the iPhone has become
relocked to the original wireless provider and that status will not change
no matter what iOS version is installed.

Long story short....I restored my computer to an earlier point using time machine and now all of the previous back-ups are gone. My question has to do with itunes...is it possible to restore my itunes library to the most recent backup because the restore

Long story short....I restored my computer to an earlier point using time machine and now all of the previous back-ups are gone. My question has to do with itunes...is it possible to restore my itunes library to the most recent backup because the restore that I did was in march and the latest backup was in may....the reason being is that there were app that i had downloaded that are in my most recent back-up, that were not in the backup I restored to. Is it possible to just restore one application ie)itunes?

See this post.
tt2

I restored my iphone5 after forgetting the passcode unfortunately i am not able to activate the phone because it can't recognize my sim card

I restored my iphone5 after forgetting the passcode unfortunately i am not able to activate the phone because it can't recognize my sim card

Has the phone been officially unlocked by the provider before? Only the provider can unlock the phone, if the phone has been jailbroken to unlock it, restoring will lock it again.
iPhone: About unlocking

My 7-year-old iMac died. I don't plan to replace it. It is backed up to Crashplan. Is it possible to restore my iPhoto library to the cloud, i.e. iCloud or Dropbox, so that I can access the photos as needed from my iPad or iPhone?

My 7-year-old iMac died. I don't plan to replace it. It is backed up to Crashplan. Is it possible to restore my iPhoto library to the cloud, i.e. iCloud or Dropbox, so that I can access the photos as needed from my iPad or iPhone?

Probably not - but that certainly does not involve iPhoto for the Mac - you need to look at Crashplan support for you options
And iCloud is not a place to store photos so that is certainly not a possibility
If you restore your masters folder out of the iPhoto library you will have all of your original photos to do with what you please
LN

I am using iphoto 6.0.6 and after opening the application it drops below the dock. I can see it when I use expose to reveal all open windows but once selected it drops below the dock.

I am using iphoto 6.0.6 and after opening the application it drops below the dock. I can see it when I use expose to reveal all open windows but once selected it drops below the dock.

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

MacBook pro fails to wake up after opening the lid

My MacBook pro screen lights up briefly after opening the lid from a sleeping status. However the screen then turns off and the only remedy is to force a shutdown by holding down the on/off button and then restarting it.

My "nearest" local Apple Store is almost 40 km far from where I live...It's clearly a softwere problem and yes, It's not new for Apple. I hope they consider this annoying problem and fix it as soon as possible. I also noticed that doing a "Verify Disk" via Disk Utility an error accours by checking the free space of the HDD. It's suggested to repair the disk immediatly (bold red alarm pops out ) rebooting the system and using the tools under the CMD-R startup. By the way, ignoring the problem and by just verify the disk again, the error maigcally disapper into the void...that's weird !
I hope somethings will come out, I'm really, really annoyed by this problem and i don't want to run in some data loss or HDD failure because i really need my Mac for work (as, i think, most of us )!
Claudio

I have been edited a project for weeks. Today, a few minutes after opening the project to work on it again, my computer shut down abnormally. The timeline disappeared. All the media is still in the project but my edited timeline is gone. Please help!

I have been edited a project for weeks. Today, a few minutes after opening the project to work on it again, my computer shut down abnormally. The timeline disappeared. All the media is still in the project but my edited timeline is gone. Please help!

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

How to do that when you open a new tab to appear like the start page after opening the browser?

How to do that when you open a new tab to appear like the start page after opening the browser?

https://addons.mozilla.org/en-US/firefox/addon/newtaburl/
Never used it myself, so I'm not sure if you can set to about:home or not. You'll have to give it a try.

Working with bootstrap css file after opening the browser

working with bootstrap css file after opening the browser when i came back on working on bootstrap my computer started hanging and opning new tabs and showing message " A caused the program to stop working correctly.Windows will close thoe program and notify you if solution is available"

Hi Geetha,
1.) button problem:
i don't know how you open the form - when you do it with a XML file maybe you packed the wrong XML file into your addon installer.
2.) the flickering can be a problem of formatted searches or interacting with other addons.
when addon a. changes a field it can be that addon b. does something because of the event from addon a.
the same can happen when you have formatted searches that do something when a field changes.
ok - that are my last tipps for this day
good night
David

Simplify recovery after opening the database with the RESETLOGS option

Hi All,
I just have doubt ,regarding the topic which is given in Oracle 11g Exam Syllabus for upgrading from 9i to 11g OCP.The opic is
*"Simplify recovery after opening the database with the RESETLOGS option"* in this topic what one need to study.
As i am little bit confuse related to "Recovery through RESETLOGS and reset of the incarnation of the database".
Kindly correct me if i am wrong
Thanks in advance

vk82 wrote:
Hi All,
I just have doubt ,regarding the topic which is given in Oracle 11g Exam Syllabus for upgrading from 9i to 11g OCP.The opic is
*"Simplify recovery after opening the database with the RESETLOGS option"* in this topic what one need to study.
As i am little bit confuse related to "Recovery through RESETLOGS and reset of the incarnation of the database".
Kindly correct me if i am wrong
Thanks in advanceyou are correct so you can mark this thread as answered
Handle:     vk82
Status Level:     Newbie (35)
Registered:     Nov 21, 2010
Total Posts:     733
Total Questions:     180 (115 unresolved)

Can I retrived an auto-saved version of a project after opening the saved version by accident?

Can I retrived an auto-saved version of a project after opening the saved version by accident?

Unfortunately, no.
Opening the (last) "Saved" version after a crash automatically discards the contents of the (invisible) autosave folder.

When does the test time start? After installing the program? Or only after opening the program? background: I accidently installed the Photoshop test version, but O am still busy with testing Premiere Pro.

when does the test time start? After installing the program? Or only after opening the program? background: I accidently installed the Photoshop test version, but O am still busy with testing Premiere Pro.

Freialeben7 the evaluation period begins when you first launch the Adobe application you are wishing to evaluate.

After loading the internet using Firefox AND then selecting NEWS and a delay the Error "The MSN toolbar has encountered an error. etc" occurs. Also, when browsing some searches are "REDIRECTED"!

After loading the internet using Firefox AND then selecting NEWS and a delay the Error "The MSN toolbar has encountered an error. etc" occurs. Also, when browsing some searches are "REDIRECTED"!
== This happened ==
Every time Firefox opened
== Hard to say but have been trying to diagnose for at least a week.

Original message wouldnt post with attachments - trying again....
Attachments:
secondclickheredialog.jpg ‏40 KB
FirstDialog.jpg ‏19 KB
Firstclickheredialog.jpg ‏16 KB

HT5140 I did put another language in input source, and keyboard shortcut, but when I close this window, after opening the mail window, where do I see different language to click on?

I did put another language in input source, and keyboard shortcut, but when I close this window, after opening the mail window, where do I see different language to click on?

You switch keyboards by going to the " flag" menu at the top right of the screen.

Is it possible to restore a datafile after opening the db using resetlogs?

Similar Messages

Maybe you are looking for