Is it possible to rotate a control/indicator in the panel?

I'm using labview 6.0
I tried customizing the control/indicator but I don't know how to do it...
Thank you.

I think I'm not explaining the problem well...
What I want to do is something like the image attached.
(I know where is the "costumize control" window, but I don't know how to rotate controls).
Thanks for your answers
Attachments:
Rotated_controls_2.jpg ‏32 KB

Similar Messages

Is it possible to create a control file without the datafiles

Hi All,
Is it possible to create a control file without the datafiles?
on any OS or DB version
regards,
sachin

if I understand properly:
- you have a script to recreate the controlfile
- you have all of your database files backed up except your controlfiles
This should work as this is how we sometimes refresh dev databases:
1) restore the copies of the database files
2) recreate the controlfile
3) recover the database files to the desired point in time (if hot backup or archivelogs are available, otherwise, it would be as of the time of the backup)
4) add temp files to temporary tablespace(s)
The simpler solution would be to backup your controlfile at the same time as your datafiles (RMAN or o/s copy).
I hope I understood your question properly.

Is it possible to enter "Input Control" values on the report prompts screen? How?

Our report users are used to enter their parameters on the prompt.
I have created a new report on WEBI XI 3.1. and this report has some prompts and also input controls.
That means, when the user wants to run the report they have to enter their parameters on the report prompt and then they have to navigate to the input control and select the values.
That makes them feel like they are entering parameters twice for a report.
Is there any way the initial value for an input control can be entered on a report prompt screen?
So, the user enters the values of the prompt and the initial values of the input controls together only once at the prompt screen?

Thank you very much for the confirmation Amit.
Yes, I considered adding a prompt instead of an input control but this input control selects data based on a custom calculation performed in a variable at the report level. To create a prompt on the query I would have to make the calculation at the universe level.
Anyway, it seems 'Input Control" may be a useful tool for our reports, so we decided to get our report users accustomed to the input control tool.
Thanks again for the help.
Francisco

When rotating my custom .bmp image with Rotate Image Control.vi using the Rotate.llb, why is my rotated image coming up blank?

I downloaded the Rotate.llb and am trying to rotate a simple 24bit .bmp I made in Windows Paint, but the rotated image comes up blank.
I edited the default image control and indicator to have my image inside it and really don't know what else to do? The example works fine with the default image, I'm wondering if it has to do with my image properties?
I tried using "Picture to Pixmap" but to no avail. Any help would be greatly appreciated. I am attaching a screen shot of my results and the modified Rotate vi I am working on, thanks.
Attachments:
Rotate Picture Control_v2.vi ‏16 KB
rotate_shot.jpg ‏383 KB

Hello Sametron,
Give this a try:
Regards,
Jeff L.
Applications Engineer | National Instruments
Attachments:
201606.zip ‏1 KB

Set default to Classic style control/indicator

Is it possible to set default to "classic style" control/indicator so that when I create a control/indicator from the block diagram, I will have a classic style control/indicator on the front panel?
Somehow, I still like the classic style control/indicator more. Many times, after I create a control/indicator from the block diagram, I have to replace the new style control/indicator with a classic style control/indicator from the front panel. It can be done, but it would be nice if I can create what I want from the block diagram directly.
Thanks.
Ian Ren

Well, to manually place a classic control, you would just go to the classic palette, no settings needed.
Have you read the detailed help for this option? Maybe it's not exactly what you think it is.
"Control Style for Create Control/Indicator—Changes the style of the control or indicator LabVIEW creates when you right-click a terminal and select Create»Control or Create»Indicator from the shortcut menu."
LabVIEW Champion . Do more with less code and in less time .

Price Control Indicator

Hi,
We noticed that one material with wrong price control indicator as "S" instead of "V". It's impacting the overall Inventory valuation. We intend to update the MAP prices for these part no at our end to reflect the correct Inventory but can proceed only once the price control indicator is corrected appropriately.
How can i acheive this issue?
Note: Material contains open po's and stock.
Thanks & Regards
Anilkumar Dalai

Hi
The price control indicator in the Material master can be changed any time if it is allowable to change.
As previously you had price control S - & standrda proce maintained
when you change it to V - The Mocving average proce will be overwritten by the Standard price thus keeping the valuation same
Thanks & Regards
Kishore

Changing price control indicator and posting difference to sperate account

Dear Guru's
Need your advice on how to handle the following scenario. Company wants to change the Price ontrol indicator in a material from V(moving price average) to S(Standard cost).However there is stock in the inventory for this item.Additionally they also want to change the price of the item with the difference posted to a seperate balence sheet account.

Hello
While changing the price control, the moving average price becomes the standard price, which is then used for valuation.
You change the type of price control by overwriting the price control indicator in the material master record with the new indicator.
Changing the type of price control for a material does not change the value of the material stock, since in both cases the current price becomes the new price.
For changing the material price, use revaluation MR21.
At the time of price change, for a material subject to standard price control, the material debit or credit is posted to a price difference account. The offsetting entry is made to an income or expense account. Consequently, a material debit or credit for a material subject to standard price control does not lead to a revaluation.
Regards

Control indicator

can u please explain once again?
basically, control indicator allows the differentiation between the various kinds of purchasing document.
It makes a distinguish between a standard PO and a stock transport order?
For model specification and outline agreement req. the control indicator----R?
Does R belongs to standard PO?
other puchasing documents like EC,FO,IN,NB are blank(that means these are
stock transport orders)?
I haven't understood the control indicator concept?
please explain me once again?

Hi,
this has been answer on another recent question.
There are many document types for POs etc. and they all are treated in exactly the same basi c way EXCEPT for STOs and so the system needs this flag to identify the document types that are to use the STO process as opposed to the normal PO process.
BLANK means that they are NOT transport orders.
For requisitions the same applies except that there is a special requisition type for contracts and this again usess a different process to normal requisitions and so the system needs this flag to indicate if this special process applies (especially if you have created new document types)
Steve B

Price Control Indicator inconsistant

I am getting this error message at time of Goods Movement (Transfer Posting store to store two step Mvt 313) for a particular material.
M7315 - Price control indicator inconsistent:
The problem is I have not created Accounting views for material i have only enabled accounting view in back end configuration.
I have also checked material twice in MM03 accounting view is not created. I cannot understand why sap is giving this message if accounting view is not created.
Any help would be useful.

Hi,
Before transfer posting store to store, 1st check material type of material master in t.code:OMS2 and find price control in it.
Now use t.code:MM03 and search material status with views for each storage location individually with plant.
If material properties are same for two storage locations- why cannot you try with 311 movement type-Transfer posting storage location (one-step)
Regards,
Biju K

How can I customize the Column Headers of the TABLE control/indicator in LabVIEW ?

I need to customize the TABLE control/indicator in the LabVIEW as the same shape of the table in the LabWindows CVI or the DBgrid of the Borland Delphi. Where can I modify the color and shape of the Column Headers and the Row Headers.
Thanks,
Cleber

Salutations,
You asked this question about 3 months ago, and no one answered it.. How rude of them, well....
You can customize any control/indicator by right mouse clicking on it, going to advanced, then customize. If you want to color it, you can always right mouse click with the shift key down, and pull up the painting tool stuff. Or use the tab key if you want to scroll through tools. I believe it's the tab key. Alright, i bet you've long since figured it out, but i couldn't resist.
Sincerely,
ElSmitho

Can you programmatically change the width of columns in a table control\indicator

Is it possible to programmatically change the width of columns in a table control\indicator ie to fit to width of the data or in my case the header information.

Create a property node (or reference) and use the 'Active Cell' property to select which column you want to change and then use the 'Cell size'--> 'Width' property to change the size.
"There is a God shaped vacuum in the heart of every man which cannot be filled by any created thing, but only by God, the Creator, made known through Jesus." - Blaise Pascal
Attachments:
table.vi ‏33 KB

Is it possible to rotate iSight image 180°

Is it possible to rotate the iSight camera 180° (upside down) and have the image flop 180° (right side up)? I would like to use the magnetic camera mount underneath a metal shelf and need the image to flop right side up...this would greatly extend the iSight camera's usability...
Hopefully a third party developer is working on this one.

I've been using this iGlasses software the past few days. It's worked perfectly. Well, worth the money if you have an iSight camera (regardless of whether or not you need to flop it 180°). The brightness controls and macro focus controls work perfectly. Great product.

Thorlabs rotation stage control using LabWindows

Hi there
I have been trying to program automated control of Thorlabs rotation stage PRM1Z8 based on TDC001 DC servo controller using Lab Windows Actives Controller Wizard.
The steps followed by me as follows:
1. Insert Activex control (thorlabs stage GUI) in the panel using .ocx file obtained with the stage. Edit the control properties to put in the controller serial number and then right click on the control to generate the activex control driver.
The following code was written. Although I do not obtain any compiling error, I have not managed to communicate with the stage.
#include "MG17Motor.h"
#include "AProt.h"
#include <cvirte.h>
#include <userint.h>
static HRESULT _tmp8;
static long _tmp9;
static HRESULT _tmp3;
static long _tmp4;
static int _tmp2;
static CAObjHandle _tmp1;
static int panelHandle;
int main (int argc, char *argv[])
if (InitCVIRTE (0, argv, 0) == 0)
return -1; /* out of memory */
if ((panelHandle = LoadPanel (0, "AProt.uir", PANEL)) < 0)
return -1;
DisplayPanel (panelHandle);
RunUserInterface ();
DiscardPanel (panelHandle);
return 0;
int CVICALLBACK imagepanel (int panel, int control, int event,
void *callbackData, int eventData1, int eventData2)
switch(event)
case EVENT_COMMIT:
_tmp2 = GetObjHandleFromActiveXCtrl(panelHandle, 2, &_tmp1);
_tmp3 = MG17MotorLib__DMG17MotorStartCtrl (_tmp2, NULL, &_tmp4);
_tmp8 = MG17MotorLib__DMG17MotorIdentify (_tmp2, NULL, &_tmp9);
break;
return 0;
Please could you help me sort out any programming error that I might have committed here.
Thanks
Deepa

Hello Deepa,
I never used Thorlabs products, but as you can see in the online help for the command, GetObjHandleFromActiveXCtrl returns the obtained handle into the last parameter, in your case _tmp1; I suppose this is the variable you must pass to the following command(s) in the Thorlabs library. The return value _tmp2 is an error code which you should use to add some error checking to your code.
You should also check into Thorlabs documentation the exact meaning and usage of the command you are using: it is possible that the return values are error codes that may give you some guidance on how to clean up any error you may have in function calls.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Is it possible to call the contact number indicated in the cell?

Hello! Tell me please, I want to move a lot of contacts in the electronic form and organize a list of contacts in Numbers. Is it convenient to use it on the iphone? Is it possible to call the contact number indicated in the cell? That is an example: name, contact, etc. A few columns. I click on the number of human cell, and then what would happen if a set of user (as it happens in the notes for example)?
Sorry for my english.

Your post is now in the iWork for iOS community. You should be able to get to it using the link in the email you receive with this message.
Regards,
Barry
PS: Interesting that I received the notification of your post in Russian (except for the first and last words).
Here's Googles translation of my reply above:
Ваше сообщение в настоящее время в IWORK для IOS сообщества. Вы должны быть в состоянии добраться до него по ссылке в сообщении электронной почты вы получите с этим сообщением.
С уважением,
Барри

Is it possible to rotate a video clip in iphoto? Thanks.

I recorded a video clip with the camera on it's side and once uploaded to iphoto it found that it was still on it's side and the 'rotate' button at the bottom is not lit up. Is it possible to rotate? Thanks, I would appreciate your help!
Jan

No. You'll need to use Quicktime Player to rotate and export as a new file. It's explained my léonie in this topic: Movie clip rotation

Is it possible to rotate a control/indicator in the panel?

Similar Messages

Maybe you are looking for