Is it possible to run both Netflow v5 and v9 at the same time

Hi All,
Just wondering if it is possible to run netflow version 9 and version 5 at the same time (to different destinations) on the same router please?
Thanks very much
Regards
Amanda

No Amanda,
we cannot simultaneously configure both versions of NETFLOW on cisco ios. After configuring firstone when you try to configure other version it will override the previously configured version.
"Please do rate helpful posts"

Similar Messages

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

If i purchase the PS, can i install it on both my PC and MAC at the same time?

if i purchase the PS, can i install it on both my PC and MAC at the same time? I use the PC at home and MAC while on the road.

yes, if you subscribe to cc (which included ps cs6, ps cc and ps cc 2014).
no, if you purchase ps cs6.

Is it possible to use both inputs of my AudioBox at the same time?

I was having issues last night, and I wanted to poll the community before I declared my device deffective.
I have an AudioBox- USB and managed to hook it up to GB. I tried both guitar and a microphone in Input 1 and they both worked. I decided to try to have them both hooked up at the same time using both inputs, but I could not get GB to recognize anything from input 2.
As a trouble shooting measure, I disconnected everything from input 1 and tried using input 2 on its own: still nothing.
Questions:
- Is there something I need to do in GB for it to recognize audio for input 2?
- Maybe GB cannot do this, and I need to use Logic/Mainstage (have not tried this yet)
- If GB can do this (and should have done so automagically), is my device possibly deffective?

RLBL wrote:
I could not get GB to recognize anything from input 2.
[...] (and should have done so automagically)
you have to set which channel you want each track to use:
http://www.bulletsandbones.com/GB/GBFAQ.html#multitrackrecordinggbv10
This FAQ entry offers a Minute GarageBand video tutorial
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to show a picture both on client and server at the same time (X11?)

Hi Guys
I want show a picture on my client as well as on the server(in another location) at the same time, pretty much like showing something both on laptop and on a projector. Assume I have a picture sssss.jpg on the server A1, if I want to open that picture to my client, I can simply to do the following from client A2:
xhost A1
telnet to and login A1
setenv DISPLAY "ipaddress of A2":0.0
Anyone can direct me how to show picture the client that I am sitting at an also show on the server at the same time?
Thanks

VNC would let you do that. With a shared connection, both machines could run a VNC client to the same session.
Darren

Is it possible to have Oracle client 7 and 9 at the same time?

I have Windows XP and I need to have both clients at the same time in the same machine.
Is it possible to have multiple oracle homes, one for each client version?
thanks.

Hi,
Thanks for the quick replay...I supposed that answers but I have seen some info where it said that Oracle Client releases previous to 8.0.4 supports only single home.
The case is my customer has already installed and Oracle Client 7 to access some old database, now we need to install on the same computer a Oracle Client 9.2, you mean there is no problem with this ?
Thanks in advance....

Hello i opened both logics 9 and x at the same time after that lost audio on both softwares everything looks normas got a motu audio interface 828MKII and i just can hear audio in the headphones of the audio interface can anybody help me? i am in the midd

Hello i opened logic 9 and logic x at the same time after that i lost audio in both programs i can only hear audio in the main output of my interface motu 828MKII
can somebody help me please? am in the middle of o project thank's

Did you reset Logic's audio preferences?
Did you do a hardware reset of the MOTU unit?
Try deleting preferences in Logic X
See my post in this message.
https://discussions.apple.com/message/24614057#24614057

Delete un email both on ipad and iMac at the same time

i have an ipad and an imac. I receive the mails from the same box mail on both computers. I would like, when i delete an email on the imac, that this email be also delete on the ipad. thanks for your help!

Yes - and if you have the relevant version of iOS on your devices (4.3.3 or later) you can set them up so that they automatically download new purchases (music, apps and/or ibooks) : http://support.apple.com/kb/HT4539

Using iPod both in Windows and Mac at the same Time?

I was wondering if it was possible to use my brand new ipod both in Mac as in Windows without having to format or restore it every time?
The idea is to use "manually manage songs" on both Operating Systems.
Thanks for your help!

iPods come formatted Windows and will work on Macs and Windows. Unless you Restore it in a Mac, it will stay formatted Windows.
If it doesn't work, put the iPod on Disk Mode and iTunes should recognize in both systems.
If it is formatted Mac, it will not be useable on Windows, even in Disk Mode.

Can I setup Lr6 on both my Imac and pc at the same time and share fles?

I am new to the cc, I would like to subscribe to the cc to have access to Ps and lr. I want to be able to setup both programs on two different operating systems, an Imac and a PC. I have 6 terabytes of storage at the Imac and would like to have access to those files from my pc also.

yes.
install on both and then setup your file sync, Download Adobe Creative Cloud apps | Free Adobe CC trial

Is it possible to setup 802.11 n and ac at the same time?

n for the iPhone 5S
ac for the late 2013 rMBP

The "new" AirPort Extreme delivers a signal that is compatible with "a", "b", "g", "n", and "ac" wireless, so "n" and "ac" are being delivered simultaneously at all times.
Devices will automatically connect to the best signal quality based on their capabilties and distance in relation to the AirPort Extreme.
So, when the MBP is close to the AirPort Extreme or it has line-of-sight with the AirPort Extreme, it should be receiving a high quality "ac" signal.
Same for "n" on the iPhone.

HT1399 Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

I am back with an update. I turned off Match on both the ipad and the iphone 5. By doing so I was able to sync my Iphone and ipad to itunes and store the music on my devices rather than the slow streaming. So far this has fixed my problems with the iphone I have all my music, playlist, most of the album art and so on. But the ipad is a different story. I have the music and artist but not one playlist I am sure Apple will have an upgrade soon that will address these issues they are usually very good about this.
Now have any of you experienced another problem that has existed as long as I have used faces in Aperture.
I have over 200 faces and they are organized a-z problem is I have this going on A-Z folowed by a few that start over A-Z followed by another few A-Z and again a 4th time A-Z. Imagine how difficult it is while I am showing someone the great features of my iphone, ipad and imac. Which I do talk highly of all the time. But how do I explain that even though their name starts with a or b or what ever they are not important enough to me to be in the first list of A-Z or even the 2nd or 3rd list of A-Z someohow they are in the 4th section of the list!!!!
I have managed to get the Imac to fix this but for some reason the IOS devices do not. Any ideas?
Thanks Al

Can we use both INSERT and UPDATE at the same time in JDBC Receiver

Hi All,
I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
user send the file which contains both new and old record and I need to save those in MS SQL database.
If the record exist then use UPDATE otherwise use INSERT.
I looked on sdn but didn't find any blog which perform both the things at the same time.
Interface Requirement
FILE -
> PI -
> JDBC(INSERT & UPDATE)
I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
Thanks,

Hi ,
          If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
"If the record exist then use UPDATE otherwise use INSERT."
Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ... where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows you proceed with "insert into tablename....." since there are no old records present in database.
Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database. A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server.   If you need further help on how to write and call stored procedure in MS SQL you can look into these links
http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
[ This part you can ignore, Since its not sure that you will face this situation
    Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
http://www.faqs.org/docs/ppbook/r27479.htm
http://msdn.microsoft.com/en-US/library/ms187373.aspx
http://msdn.microsoft.com/en-US/library/ms173763.aspx
http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
    There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
regards
Anupam

Running Leopard and Tiger at the same time VMWare fusion/Parallels?

Hello,
I was wondering, is it possible to run Tiger and Leopard at the same time? Some older applications won't run properly in Leopard. The iMac came both with Tiger and Leopard (last November). It has been described elsewhere that one can install Tiger and Leopard on separate partitions and switch by rebooting. But it would be nice if one could run Tiger in Leopard like one can run Windows/Unix using VMWare Fusion or Parallels. Is that feasible?
best wishes

I agree with you that virtualizing Mac OS X would be great. I'm an Apple technician and it would really help with my work. But Apple's EULA does not permit the use of OS X in a VM. They changed OS X Server's EULA recently to permit it, but not the "client version".
So your Mac can virtualize nearly any OS out there, but not OS X. And I believe (not sure) that a VM of OS X Server will only run on OS X Server.

How can i run multiple instances of Photoshop EXE at the same time on windows 7

Alright. You may ask why do you need multiple ?
Assume that i have 10000 PSD files in 10 different folders
I have a script that just save as them as PNG
And these files are each 3000x3000 px
My computer has 8 cores and 1 photoshop exe is only using 1 cpu core
Also i have SSD raid system it has 750 mb read write per second
So right now i am wasting my time with running only 1 photoshop exe instead of at least 4

I'm not aware of a way to run multiple instances or different versions of photoshop at the same time on windows.
Assuming of course they are all installed on the same operating system.
On mac versions you can running two different versions of photoshop at the same time, but i don't think that's possible on windows where it
appears that only one version of photoshop can run at a time.

Is it possible to run both Netflow v5 and v9 at the same time

Similar Messages

Maybe you are looking for