Is it possible to run OAS 10.1.2 with JDK 1.6 ???

Well on the one hand we have Oracle ADF BC application that was developed with JDeveloper 10.3.4 and runs fine on OAS 10.1.2 JDK 1.4 on the other hand we have a 3rd party Map Server (servlet + java code) that is black box and only runs on JDK 1.6 because it needs JDK 1.6 features.
Currently the only available course of going forward is to introduce a new open source 1.6 compliant server to run the Map Server and use AJAX to cross domain communicate the two. Client would like to avoid this, would like one application on one server.
Restrictions are
1) To get the Map Server in JDK 1.4 format is not an option and
2) Upgrading to a Oracle Server that is JDK 1.6 and supports the ADF BC application is not an option. And not sure if OAS 11 can run the ADF BC application since I did a quick test by trying to compile the ADF BC application JDeveloper 10.3.4 code in JDeveloper 11 with out any success.
So to my question if I could run OAS 10.1.2 JDK 1.6 it might solve the problem before i attempt that I like to ask the ideas of others that might have faced such integration issues before.
This is urgent any help is welcome by anyone and everyone and especially the Gurus.
thanks in advanced health and happiness to every one

AFAIK, Oracle AS 10.1.2 is not certified with JDK 1.5 or higher.
Oracle AS 10.1.3 is certified with JDK 1.5 and 1.6 on some platforms. (Check metalink.oracle.com -> certify for details)
Oracle FMW 11.1.1.0.1 (aka WebLogic 10.3 plus JDeveloper 11.1.1.0.1) is certified with JDK 1.6
Not certified means use it on your own risk - no support.
--olaf

Similar Messages

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? If version 6.5 does not support this configuration, do any of the later versions support it?

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system?
If version 6.5 does not support this configuration, do any of the later versions support it?
I have an Ada executable that's creating a buffer of data that's being fed to a Labview executable that's displaying the data in a GUI. We're re-architecting some legacy system hardware and I'm just trying to figure out if this configuration is even possible.
Thanks

Hi,
I never heard of LabVIEW6.5. I only know of LV6i, LV6.1 and LV7.0...
Why don't you just call your next/regional NI sales rep?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? If Labview ver 6.5 does not support this configuration, do any of the later versions support it?

Is it possible to run Labview version 6.5 with PowerPC as the target CPU and VxWorks as the target operating system?
If version 6.5 does not support this configuration, do any of the later versions support it?
I basically have an Ada executable and Labview executable that currently run on a Sun Machine with Solaris as the operating system. I'm re-architecting the system hardware and will be getting rid of the Sun Machine and Solaris. I'm don't have any issues with the Ada executable, but I'm not sure what configurations Labview supports.

duplicate post
In the future, please don't try to stuff your message in the subject line. Thanks.

Is it possible to run sun studio 12 ide with sun studio 8 compiler?

Hi, i am in the process of evaluating sun studio 12. Our company cannot move to sun studio 12 compiler collection right now as it is a huge code base and it will take us few months even before we start using sun studio 12 compiler in our development environment. Is it possible to use sun studio 12 ide with sun studio 8 compiler collection(CC, dbx etc)? Your feedback is appreciated. thank you.

There are two parts to the answer.
1) whether you can
To choose a compiler set follow Tools->Options->C/C++
and in the BuildTools tab you'll see how it picks up
compilers from your PATH.
This dialog doesn't govern choice of dbx, which will always
come from the installation. However you can alter which dbx
is used by presetting the environment variable SPRO_DBX_PATH
to teh full pathname of a dbx of your choice.
2) whether you should
The IDE should work reasonably well with older compilers. They
are not that tightly bound.
The IDE will not work well enough with an older dbx, especially as
old as studio 8. However, while not officially supported or tested
the SS12 dbx should be reasonably bwd compatible with code
generated from older compilers.
So my recommendation is: don't use SPRO_DBX_PATH and
give the old compilers a try.

Is it possible to run a subVI in parallel with the caller VI?

I have a front panel VI which calls numerous subVIs, one or two of which I would like to execute simultaneously with the calling VI. The front panel has time-dependant operations which are being prevented from running because it is waiting for the subVIs to finish, even though no data is required from them.
Is it possible to call these subVIs such that they run silently in the background allowing the front panel to execute unhindered?
I've looked at the Synchronisation features but is this what I need?

shoneill wrote:
> It's also very important to mention that the whole multi-threaded
> execution CANNOT be reliably observed in highlighting mode in the
> LabVIEW development environment. You need to let the VI run
> full-speed to see this.
>
> Highlighting (to the best of my knowledge) forces single-threading, or
> acts like it does.
This is simply a convinience by LabVIEW since humans are inherently
non-multi treaded. What you will see in parallel loops and which can
still be distracting is that LabVIEW seems to randomly switch between
different parts of your diagram. In fact this is also what is happening
in normal execution but the execution switch is so fast (each individual
operation typically taking microseconds it
seems they execute in parallel.
The nice part of LabVIEW since version 2.0 somewhere around 1988 already
is, that it provides this seemless multithreading on every single
platform even if the underlaying OS is not multithreading capable at all
(Win3.1, MacOS).
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Is it possible to run my 2013 Time Capsule with no wireless password?

I just bought a 2013 Time Capsule router to replace my first gen Time Capsule
Will this thing let me run it with no security?
I prefer to run my home network without any password so my guests and friends can use it.
I know it's not recommended but I have never had a problem in 15 years.

You are using the wrong setting.
Click Cancel to get out of AirPort Utility without making any changes.
Then, follow these instructions exactly.
Open AirPort Utility again, click on the Time Capsule icon and click Edit
Click the Wireless tab
Change the setting for Wireless Security to None
Click Update to save the changes

Error while running Dev60 with jdk 11711o

Dear OTN Members / Oracle Development Team.
Have any one tried it. Help required form Oracle Devlopemnt
Team.
hi i am using oracle8 OAS 4.0.7, Developer 6.0 production
with NT 4.0 and service Pack 3
when i try to run the form through jinitinator or JDK provided
with the package i get the following error.
running with jinitator
Oracle JInitiator version 1.1.7.11
Using JRE version 1.1.7.11o
User home directory = E:\WINNT\Profiles\Administrator
Proxy Configuration: no proxy
java.io.FileNotFoundException: \forms60\f60all.jar
at java.io.FileInputStream.<init>(FileInputStream.java:56)
at sun.net.www.protocol.file.FileURLConnection.connect(Compiled
Code)
at
sun.net.www.protocol.file.FileURLConnection.getInputStream(FileUR
LConnection.java:162)
at
sun.net.www.protocol.http.HttpURLConnection.openConnectionCheckRe
directs(Compiled Code)
at
sun.applet.AppletCache.getInputStream(AppletCache.java:588)
at
sun.applet.AppletResourceLoader.loadJar(AppletResourceLoader.java
171)
at sun.applet.JinitAppletPanel.loadJarFiles(Compiled
Code)
at sun.plugin.AppletViewer.loadJarFiles(Compiled Code)
at
sun.applet.JinitAppletPanel.runLoader(JinitAppletPanel.java:500)
at sun.applet.JinitAppletPanel.run(Compiled Code)
at java.lang.Thread.run(Thread.java:466)
and with JDK
Microsoft (R) VM for Java, 5.0 Release 5.0.0.3165
==============================================
? help
c clear
f run finalizers
g garbage collect
m memory usage
q quit
t thread list
==============================================
com.ms.security.SecurityExceptionEx[oracle/forms/engine/Main.init
]: cannot access file E:\WINNT\Java\.hotjava
at com/ms/security/permissions/FileIOPermission.check
at com/ms/security/PolicyEngine.deepCheck
at com/ms/security/PolicyEngine.checkPermission
at com/ms/security/StandardSecurityManager.chk
at com/ms/security/StandardSecurityManager.checkRead
at java/io/File.exists
at java/io/File.mkdirs
at sun/applet/AppletViewer.<clinit>
at java/lang/ClassLoader.findSystemClass
at com/ms/vm/loader/URLClassLoader.loadClass
at java/lang/ClassLoader.loadClassInternal
at oracle/forms/engine/Main.init
at com/ms/applet/AppletPanel.securedCall0
at com/ms/applet/AppletPanel.securedCall
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.run
at java/lang/Thread.run
Error getting package information: sun/applet
com.ms.packagemanager.PackageManagerException: Package not
ound
at com/ms/packagemanager/PackageManager.getPackage
at
com/ms/security/SecurityClassLoader.getSecurityInfoFromPackage
at
com/ms/security/SecurityClassLoader.findPackageManagerClass
at
com/ms/security/SecurityClassLoader.findPackageManagerClass
at com/ms/vm/loader/URLClassLoader.loadClass
at java/lang/ClassLoader.loadClassInternal
at oracle/forms/engine/Main.init
at com/ms/applet/AppletPanel.securedCall0
at com/ms/applet/AppletPanel.securedCall
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.run
at java/lang/Thread.run
java.lang.ClassNotFoundException: sun.applet.AppletViewer
at com/ms/vm/loader/URLClassLoader.loadClass
at java/lang/ClassLoader.loadClassInternal
at oracle/forms/engine/Main.init
at com/ms/applet/AppletPanel.securedCall0
at com/ms/applet/AppletPanel.securedCall
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.run
at java/lang/Thread.run
what could be the problem have any one encountered this kind of
problem.
pls help required.
mobeen
null

Dear OTN Members / Oracle Development Team.
Have any one tried it. Help required form Oracle Devlopemnt
Team.
hi i am using oracle8 OAS 4.0.7, Developer 6.0 production
with NT 4.0 and service Pack 3
when i try to run the form through jinitinator or JDK provided
with the package i get the following error.
running with jinitator
Oracle JInitiator version 1.1.7.11
Using JRE version 1.1.7.11o
User home directory = E:\WINNT\Profiles\Administrator
Proxy Configuration: no proxy
java.io.FileNotFoundException: \forms60\f60all.jar
at java.io.FileInputStream.<init>(FileInputStream.java:56)
at sun.net.www.protocol.file.FileURLConnection.connect(Compiled
Code)
at
sun.net.www.protocol.file.FileURLConnection.getInputStream(FileUR
LConnection.java:162)
at
sun.net.www.protocol.http.HttpURLConnection.openConnectionCheckRe
directs(Compiled Code)
at
sun.applet.AppletCache.getInputStream(AppletCache.java:588)
at
sun.applet.AppletResourceLoader.loadJar(AppletResourceLoader.java
171)
at sun.applet.JinitAppletPanel.loadJarFiles(Compiled
Code)
at sun.plugin.AppletViewer.loadJarFiles(Compiled Code)
at
sun.applet.JinitAppletPanel.runLoader(JinitAppletPanel.java:500)
at sun.applet.JinitAppletPanel.run(Compiled Code)
at java.lang.Thread.run(Thread.java:466)
and with JDK
Microsoft (R) VM for Java, 5.0 Release 5.0.0.3165
==============================================
? help
c clear
f run finalizers
g garbage collect
m memory usage
q quit
t thread list
==============================================
com.ms.security.SecurityExceptionEx[oracle/forms/engine/Main.init
]: cannot access file E:\WINNT\Java\.hotjava
at com/ms/security/permissions/FileIOPermission.check
at com/ms/security/PolicyEngine.deepCheck
at com/ms/security/PolicyEngine.checkPermission
at com/ms/security/StandardSecurityManager.chk
at com/ms/security/StandardSecurityManager.checkRead
at java/io/File.exists
at java/io/File.mkdirs
at sun/applet/AppletViewer.<clinit>
at java/lang/ClassLoader.findSystemClass
at com/ms/vm/loader/URLClassLoader.loadClass
at java/lang/ClassLoader.loadClassInternal
at oracle/forms/engine/Main.init
at com/ms/applet/AppletPanel.securedCall0
at com/ms/applet/AppletPanel.securedCall
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.run
at java/lang/Thread.run
Error getting package information: sun/applet
com.ms.packagemanager.PackageManagerException: Package not
ound
at com/ms/packagemanager/PackageManager.getPackage
at
com/ms/security/SecurityClassLoader.getSecurityInfoFromPackage
at
com/ms/security/SecurityClassLoader.findPackageManagerClass
at
com/ms/security/SecurityClassLoader.findPackageManagerClass
at com/ms/vm/loader/URLClassLoader.loadClass
at java/lang/ClassLoader.loadClassInternal
at oracle/forms/engine/Main.init
at com/ms/applet/AppletPanel.securedCall0
at com/ms/applet/AppletPanel.securedCall
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.run
at java/lang/Thread.run
java.lang.ClassNotFoundException: sun.applet.AppletViewer
at com/ms/vm/loader/URLClassLoader.loadClass
at java/lang/ClassLoader.loadClassInternal
at oracle/forms/engine/Main.init
at com/ms/applet/AppletPanel.securedCall0
at com/ms/applet/AppletPanel.securedCall
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.run
at java/lang/Thread.run
what could be the problem have any one encountered this kind of
problem.
pls help required.
mobeen
null

RUn WLS 7 as Windows 2K service with JDK 1.4.1

Has anyone able to get WLS 7 to run as Windows 2K service with JDK 1.4.1?

NO -- the first product to support JDK 1.4 is WLS 8.1. Period.
Wayne
cdd wrote:
Has anyone able to get WLS 7 to run as Windows 2K service with JDK 1.4.1?

Is it possible to run sub vi and main vi at same time from startup?

Is it possible to run both my main vi and my two sub vi`s from startup, all of them continuously? I have to sub vi`s that are supposed to take in measurements from two different instruments continuously. I manage to make a program where I can open up and close the sub vi`s, but when my sub vi`s are closed, nothing is happening in them...and they start to run again when I open them...and I have to close them if my main VI is supposed to run. So the data in the chart is only from the periodes when the sub vi has been open.
Thanks in advance for your help!

I will send my labview programs. "Hovedprogram" is my main vi, "front" and "front 2" is my sub vi`s. I am also using global variables. I have already searched the discussion forum trying to find an answer to my problem, but I haven`t quite managed yet...
My sub vi`s are not connected to any instrument now, but I have inserted a sinewave-generator and a chart in "front"(my sub vi) so I am able to see that the sub vi actually stop running when i close the window.
Attachments:
front2.vi ‏17 KB
Hovedprogram.vi ‏42 KB
front.vi ‏69 KB

Is it possible to run the Classic Environment INSIDE Rosetta on a MacBook Pro (Early 2008) with Leopard?

Hi there,
Rosetta works up until Snow Leopard. The Classic Environment works up until a late version of Tiger. Rosetta makes apps. built for PowerPC Macs work. The Classic Environment make apps. for Mac OS 9 work on Mac OS X for PowerPC Macs.
Would it consequently be possible to run the Classic Environment INSIDE Rosetta?
I have read https://discussions.apple.com/docs/DOC-2292, but I am still unconvinced unless there is a flaw to my logic. At any rate, I subscribe to the Churchillian adage of never giving in unless the forces of common sense and doctrine dictate otherwise.
If it won't work, then why?
Best Regards,
Stefan

Hi there, Klaus1, BDAqua and a brody,
Thank you ever so much for your kind replies! (I tried giving you the 10 pts. of 'Correct Answers' to each of you, but unfortunately it was only possible for Klaus1, so the points were distributed between him and BDAqua even though you were all helpful!)
My next question will naturally be: Is SheepShaver legal? My Google search didn't yield any conslusive proof that it was, nor any that it wasn't, but as the E-Maculation web page seemed quite official and above board I would assume that it is.
The next logical step would be to ask whether it's safe for both HW and SW to run SheepShaver. HW, it appears, is very rarely, if ever, affected by SW settings, so I would assume that hardwarewise, I'm good to go. Could it ruin the kernel of Mac OS X's Unix-based operating system?
Kind Regards,
Stefan

Is it possible to run an application from a user or container login script?

Is it possible to run an application from a user login script or a container login script?
A "Force Run" application object works fine if the user's workstation is setup to auto-load "Application Window" or "Application Explorer" but in this case I'd like to run an application when someone does a manual login (ie. they right-click red "N" and choose "Novell Login...")
Using a User Package's "Scheduled Action Policy" and the Event=Login also does not work when a user logs in manually. This type of Event seems to only apply when the user first logs into the workstation, not at a manual login.
Thanks,
Marc

> Is it possible to run an application from a user login script or a
container login script?
Yes, see the documentation:
http://www.novell.com/documentation/...a/a7q6999.html
Regards
Rolf Lidvall
Swedish Radio (Ltd)

Is it possible to run a java program without using the command prompt?

Hi,
I was wondering whether it is possible to run a Java program (not an applet) without using a command line in the command prompt?
Basically I want to run a program that will be continually running in the background and hence I don't want to have a command prompt screen loaded up as well - I just want the program to be running in the task bar.
I know how to run the program in the task bar - but I still need to launch the program from the command prompt - is there anyway I can get a program running without having to start it from the command prompt?
Cheers

Or create a desktop shortcut (in Windows) or an application launcher ( in Linux GUI).

Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details?

Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details? (In order to be able to use the older applications no longer supported in 10.9)

If you want to add a second partition to the internal drive (in Disk Utility, select the drive, then open the partition tab and just click the + button), you should first be sure that you will have enough room to accommodate whatever the second volume will be. I am currently doing this for Snow and Mountain Lion.
To get to whatever volume is not the startup disk, restart and hold down option/alt at the chime, which will bring up a selection of the two volumes. Use the left or right arrow keys to select it and then hit enter/return.

Is it possible to run 5.5 on windows 8.1??

Is it possible to run Photoshop 5.5 on Windows 8.1? I have a CD which I tried to run but when I click on install nothing is happening. I have CS6 trial already running on the laptop, so my question is, is it because I need to uninstall CS6 (although I haven't got a warning message come up to tell me to do that first before running 5.5, so don't want to get rid of the CS6 trial without making sure that it is the problem) or whether 5.5 will not run on Windows 8.1 anyway.
Your time and advice would be greatly appreciated, as need to know whether I need to return the 2nd hand 5.5 CD.

Thanks so much Gene. I really appreciate your time and suggestions.
Btw, should have been clearer as one couldn't imagine I meant that 5.5 (i.e. ancient one). The adobe website also has this info: Windows 8.1 compatibility for Adobe Photoshop version 5 which just says version 5.5 under compatibility. So it does seem possible indeed to run this but perhaps for someone more techie. Had a look at the thread re: 6.0 and tried to run it as admin. Tried copying the contents on the desktop and change the compatibility under properties (even ran compatibility trouble shooter under properties) - but in vain. Must be doing something wrong. Prolly easier to return the CD (:/)
If anyone could drop an idea in relation to how/where to buy a genuine and legal copy of a CS5/CS6 I woudl greatly appreciate. I bought the 5.5 off eBay and probably will search for the right version this time on there again. But it's a bit of a question mark for me in regards to how do I make sure that I buy a genuine licenced version which I can register with the Adobe.

Is it possible to run Posture using ISE 1.2 without NAC Agent provisioning?

Is it possible to run Posture using ISE 1.2 without NAC Agent provisioning?
-My customer does not want to push NAC Agent installation on BYOD type of computers (non-managed by the company computers).
-The requirement is to check for posture only company owned wired, wireless, and VPN connected Windows computers. The rest of the endpoints should be considered as posture incompliant, and limited access to the network should be allowed.
-No certificates are used.
-I’ve configured the required posture check, and it all works fine if a PC has NAC Agent manually installed (without ISE Client Provisioning). However, when I use a PC without NAC Agent, it is redirected to Client Provisioning Portal and is stuck there as Client Provisioning is deliberately not configured in ISE.
-If I remove Posture Remediation Authorization Profile that does URL redirect, the posture does not work.
-For now I'm testing it on wired endpoints.
Is there a way to configure ISE to fulfill the listed above requirements?
Any ideas would be appreciated.
Thanks,
Val Rodionov

Everyone who finds reads this article,
I'm answering my own quesiton "Is it possible to run Posture using ISE 1.2 without NAC Agent provisioning?"
The answer is Yes.
After doing research and configuration testing I came up with a solution, and it works fine for wired and VPN connections. I expect it to work on wireless endpoints as well.
ISE configuration:
Posture General Settings - Default Posture Status = NonCompliant
Client Provisioning Policy - no rules defined
Posture Policy - configured per requirements
Client Provisioning (under Administration > Settings) - Enable Provisioning = Enable (it was disabled in my first test)
Authorization Policies configured as regular posture policies
The result:
After successful dot1x authentication posture redirect happens. If the PC does not have NAC Agent preinstalled, the browser is redirected to Client Provisioning Portal and a default ISE message is displayed (ISE is not able to apply and access policy... wait one minute and try to connect again...). At the same time, the endpoint is assigned NonCompliant posture status and proper authorization policy is applied. This is what I wanted to achieve.
If NAC Agent was preinstalled on the PC, after successful dot1x authentication the NAC Agent pops up and performs posture check. If posture is successful, posture compliant authorization policy is applied. If posture check fails, NonCompliant posture status is assigned and posture non-compliant authorization policy is applied. Which is the expected and needed result.
The only part that is not perfect it the message displayed to the end-user when posture is about to fail. I did not find a place to change the text of that message. I might need to open TAC case, so this file can be manually found and edited from CLI (root access).
Best,
Val Rodionov

Is it possible to run OAS 10.1.2 with JDK 1.6 ???

Similar Messages

Maybe you are looking for