Is it possible to run Portal 9.2 application on non-weblogic app. servers?

Hi! I am new in WLP 9.2. We starting migration of 8.1 portal application to wlp 9.2 engine. Is it possible later to run our Portal 9.2 application on non-weblogic app. servers?

Absolutely not. Weblogic Portal is tightly coupled with Weblogic app server. You can not run it on any other App server.

Similar Messages

Is it possible to run this Oracle based application ???

Hello All,
I have Oracle Forms/reports 9.0.4.1.0 installed on my windows XP.
I am running Oracle based application from this box.
here is the url for it:
http://localhost:8889/forms90/90servlet
Is it possible to run this Oracle based application on different PC on network through above URL?
If yes, how to configure or set up this.
Regards,
DN

From port number I assume you're using Developer suite. Remember that standalone OC4J is provided by Oracle for testing purposes only. You shouldn't use that in Production environment, where you should install Application Server, eventually the standalone Forms and Reports services (without infrastructure).

Is it possible to run one ud script to update parms for multiple servers...

Is it possible to run one ud script to update certain parameters in mib for multiple
servers by giving multiple occurrences of the parameter and server id. I tried
a ud script as follows and it seem to update the parameter for only the first
server.
SRVCNM .MIB
TA_CLASS T_SERVER
TA_OPERATION SET
TA_SRVID 101
TA_SRVID 102
TA_SRVID 103
TA_CLOPT -A -r -e srv1.err --
TA_CLOPT -A -r -e srv2.err --
TA_CLOPT -A -r -e srv3.err --

From the ud's output, it looks like it used only one occurrence of the fields that
I provided.
"james mathew" <[email protected]> wrote:
>
Is it possible to run one ud script to update certain parameters in mib
for multiple
servers by giving multiple occurrences of the parameter and server id.
I tried
a ud script as follows and it seem to update the parameter for only the
first
server.
SRVCNM .MIB
TA_CLASS T_SERVER
TA_OPERATION SET
TA_SRVID 101
TA_SRVID 102
TA_SRVID 103
TA_CLOPT -A -r -e srv1.err --
TA_CLOPT -A -r -e srv2.err --
TA_CLOPT -A -r -e srv3.err --

Is it possible to use commerce server with netscape webserver and weblogic app server

Hello,
We want to use Netscape webserver using NSAPI plug-in with WLS 5.1.
In this scenario can we get full functionality of Weblogic Commerce server
2.0.1 if we wnat to use above setup.
This is urgent please.
surya

Surya,
The NSAPI plug-in with WLS 5.1 should not adversely affect the way the
Commerce Server works. Although this platform is not 'certified', the product
is J2EE compliant and should work without error.
Hope this helps!
surya chavali wrote:
Hello,
We want to use Netscape webserver using NSAPI plug-in with WLS 5.1.
In this scenario can we get full functionality of Weblogic Commerce server
2.0.1 if we wnat to use above setup.
This is urgent please.
surya

Possible to run web dynpro apps without a portal??

Hi
Is it possible to run Web dynpro apps on a WAS without a portal?
Thx

Ah,
Absolutely possible.
Use url like
http://host:port/webdynpro/dispatcher/com.your-company/yourappdc/AppName
in your browser address bar
Valery Silaev
SaM Solutions
http://www.sam-solutions.net

Is it possible to run Posture using ISE 1.2 without NAC Agent provisioning?

Is it possible to run Posture using ISE 1.2 without NAC Agent provisioning?
-My customer does not want to push NAC Agent installation on BYOD type of computers (non-managed by the company computers).
-The requirement is to check for posture only company owned wired, wireless, and VPN connected Windows computers. The rest of the endpoints should be considered as posture incompliant, and limited access to the network should be allowed.
-No certificates are used.
-I’ve configured the required posture check, and it all works fine if a PC has NAC Agent manually installed (without ISE Client Provisioning). However, when I use a PC without NAC Agent, it is redirected to Client Provisioning Portal and is stuck there as Client Provisioning is deliberately not configured in ISE.
-If I remove Posture Remediation Authorization Profile that does URL redirect, the posture does not work.
-For now I'm testing it on wired endpoints.
Is there a way to configure ISE to fulfill the listed above requirements?
Any ideas would be appreciated.
Thanks,
Val Rodionov

Everyone who finds reads this article,
I'm answering my own quesiton "Is it possible to run Posture using ISE 1.2 without NAC Agent provisioning?"
The answer is Yes.
After doing research and configuration testing I came up with a solution, and it works fine for wired and VPN connections. I expect it to work on wireless endpoints as well.
ISE configuration:
Posture General Settings - Default Posture Status = NonCompliant
Client Provisioning Policy - no rules defined
Posture Policy - configured per requirements
Client Provisioning (under Administration > Settings) - Enable Provisioning = Enable (it was disabled in my first test)
Authorization Policies configured as regular posture policies
The result:
After successful dot1x authentication posture redirect happens. If the PC does not have NAC Agent preinstalled, the browser is redirected to Client Provisioning Portal and a default ISE message is displayed (ISE is not able to apply and access policy... wait one minute and try to connect again...). At the same time, the endpoint is assigned NonCompliant posture status and proper authorization policy is applied. This is what I wanted to achieve.
If NAC Agent was preinstalled on the PC, after successful dot1x authentication the NAC Agent pops up and performs posture check. If posture is successful, posture compliant authorization policy is applied. If posture check fails, NonCompliant posture status is assigned and posture non-compliant authorization policy is applied. Which is the expected and needed result.
The only part that is not perfect it the message displayed to the end-user when posture is about to fail. I did not find a place to change the text of that message. I might need to open TAC case, so this file can be manually found and edited from CLI (root access).
Best,
Val Rodionov

Is it possible to run scheduled job

Is it possible to run scheduled job (custom developed java application), for doing some periodic database operstions in portal.
I'm using portal database (maxdb) with my portal application.I must do some periodic calculations and store them into database table.Therefore i must use scheduled job running on ortal server.
Is it possible? If possible, how?
Thanks.

Hi,
Yes it is possible with SAP NetWeaver Scheduler for Java.
You can check below link for more information:
http://help.sap.com/saphelp_nwce71/helpdata/en/44/03d66015ee10b3e10000000a11466f/content.htm
http://help.sap.com/saphelp_nwce71/helpdata/en/45/45d287e620507be10000000a1553f6/content.htm
Thanks
Sunny

Is it possible to run BP ESS/ MSS 60.x on J2EE stack 7.0 (EP 7)?

Hi there,
is it possible to run BP ESS & MSS version 60.x on a J2EE server stack 7.0 (EP7.0) ?
In the contentportfolio area of SDN ([https://www.sdn.sap.com/irj/sdn/contentportfolio]) it is stated, that BP MSS 60.1.2 runs on
---> iView Runtime Technology:
Java / WebDynpro (WAS 6.40 and higher)
(Link: [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/70649942-a46d-2910-be9b-88db98b484f5 [original link is broken]])
Same for BP ESS 60.2.
([https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/d0dfa6ad-9b6d-2910-3d9a-f278ecc80c60 [original link is broken]])
What does "and higher" mean? Do you see any problems ?
I have studied a lot of notes already, but couldn't find a clear statement on this.
Many thanks and kind regards,
Jenny

From what I have "heard", it is possible. I say that because right now, I am on ECC6/EP7 at my current client. But my previous client was on ECC5/EP6 but are now moving to EP7...and have not had problems yet. I would suggest giving it a go in a sandbox system and checking it out...same as you would do for any upgrade. The fallback is that you can upgrade your portal to EP7 but then run a separate server for your XSS apps from ECC5 (that's kinda the point of the WAS anyways....you can run your apps on separate servers than your "main" server). Your JCO connections would point to the "middle" server and those apps would then "talk" back to your ECC5 box. Anyways, I "think" just having them on the EP7 box would work.

Can we run portal iview out of portal environment?

Can we run portal iview from the external environment(java , .net)?
Can any one help?
Thanks
Rajendra.

Hi Kiran,
He means to say - How can we access/execute an existing Portal iView from outside/another environment?
If possible, could you please guide us.
Your quick response would be appreciated.
Awaiting Reply.
Warm Regards,
Ritu R Hunjan
(<i>Rajendra & I are colleagues...so answered on his behalf</i>)

Is it possible to run sub vi and main vi at same time from startup?

Is it possible to run both my main vi and my two sub vi`s from startup, all of them continuously? I have to sub vi`s that are supposed to take in measurements from two different instruments continuously. I manage to make a program where I can open up and close the sub vi`s, but when my sub vi`s are closed, nothing is happening in them...and they start to run again when I open them...and I have to close them if my main VI is supposed to run. So the data in the chart is only from the periodes when the sub vi has been open.
Thanks in advance for your help!

I will send my labview programs. "Hovedprogram" is my main vi, "front" and "front 2" is my sub vi`s. I am also using global variables. I have already searched the discussion forum trying to find an answer to my problem, but I haven`t quite managed yet...
My sub vi`s are not connected to any instrument now, but I have inserted a sinewave-generator and a chart in "front"(my sub vi) so I am able to see that the sub vi actually stop running when i close the window.
Attachments:
front2.vi ‏17 KB
Hovedprogram.vi ‏42 KB
front.vi ‏69 KB

Is it possible to run the Classic Environment INSIDE Rosetta on a MacBook Pro (Early 2008) with Leopard?

Hi there,
Rosetta works up until Snow Leopard. The Classic Environment works up until a late version of Tiger. Rosetta makes apps. built for PowerPC Macs work. The Classic Environment make apps. for Mac OS 9 work on Mac OS X for PowerPC Macs.
Would it consequently be possible to run the Classic Environment INSIDE Rosetta?
I have read https://discussions.apple.com/docs/DOC-2292, but I am still unconvinced unless there is a flaw to my logic. At any rate, I subscribe to the Churchillian adage of never giving in unless the forces of common sense and doctrine dictate otherwise.
If it won't work, then why?
Best Regards,
Stefan

Hi there, Klaus1, BDAqua and a brody,
Thank you ever so much for your kind replies! (I tried giving you the 10 pts. of 'Correct Answers' to each of you, but unfortunately it was only possible for Klaus1, so the points were distributed between him and BDAqua even though you were all helpful!)
My next question will naturally be: Is SheepShaver legal? My Google search didn't yield any conslusive proof that it was, nor any that it wasn't, but as the E-Maculation web page seemed quite official and above board I would assume that it is.
The next logical step would be to ask whether it's safe for both HW and SW to run SheepShaver. HW, it appears, is very rarely, if ever, affected by SW settings, so I would assume that hardwarewise, I'm good to go. Could it ruin the kernel of Mac OS X's Unix-based operating system?
Kind Regards,
Stefan

Is it possible to run an application from a user or container login script?

Is it possible to run an application from a user login script or a container login script?
A "Force Run" application object works fine if the user's workstation is setup to auto-load "Application Window" or "Application Explorer" but in this case I'd like to run an application when someone does a manual login (ie. they right-click red "N" and choose "Novell Login...")
Using a User Package's "Scheduled Action Policy" and the Event=Login also does not work when a user logs in manually. This type of Event seems to only apply when the user first logs into the workstation, not at a manual login.
Thanks,
Marc

> Is it possible to run an application from a user login script or a
container login script?
Yes, see the documentation:
http://www.novell.com/documentation/...a/a7q6999.html
Regards
Rolf Lidvall
Swedish Radio (Ltd)

Is it possible to run a java program without using the command prompt?

Hi,
I was wondering whether it is possible to run a Java program (not an applet) without using a command line in the command prompt?
Basically I want to run a program that will be continually running in the background and hence I don't want to have a command prompt screen loaded up as well - I just want the program to be running in the task bar.
I know how to run the program in the task bar - but I still need to launch the program from the command prompt - is there anyway I can get a program running without having to start it from the command prompt?
Cheers

Or create a desktop shortcut (in Windows) or an application launcher ( in Linux GUI).

Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details?

Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details? (In order to be able to use the older applications no longer supported in 10.9)

If you want to add a second partition to the internal drive (in Disk Utility, select the drive, then open the partition tab and just click the + button), you should first be sure that you will have enough room to accommodate whatever the second volume will be. I am currently doing this for Snow and Mountain Lion.
To get to whatever volume is not the startup disk, restart and hold down option/alt at the chime, which will bring up a selection of the two volumes. Use the left or right arrow keys to select it and then hit enter/return.

Is it possible to run 5.5 on windows 8.1??

Is it possible to run Photoshop 5.5 on Windows 8.1? I have a CD which I tried to run but when I click on install nothing is happening. I have CS6 trial already running on the laptop, so my question is, is it because I need to uninstall CS6 (although I haven't got a warning message come up to tell me to do that first before running 5.5, so don't want to get rid of the CS6 trial without making sure that it is the problem) or whether 5.5 will not run on Windows 8.1 anyway.
Your time and advice would be greatly appreciated, as need to know whether I need to return the 2nd hand 5.5 CD.

Thanks so much Gene. I really appreciate your time and suggestions.
Btw, should have been clearer as one couldn't imagine I meant that 5.5 (i.e. ancient one). The adobe website also has this info: Windows 8.1 compatibility for Adobe Photoshop version 5 which just says version 5.5 under compatibility. So it does seem possible indeed to run this but perhaps for someone more techie. Had a look at the thread re: 6.0 and tried to run it as admin. Tried copying the contents on the desktop and change the compatibility under properties (even ran compatibility trouble shooter under properties) - but in vain. Must be doing something wrong. Prolly easier to return the CD (:/)
If anyone could drop an idea in relation to how/where to buy a genuine and legal copy of a CS5/CS6 I woudl greatly appreciate. I bought the 5.5 off eBay and probably will search for the right version this time on there again. But it's a bit of a question mark for me in regards to how do I make sure that I buy a genuine licenced version which I can register with the Adobe.

Is it possible to run Portal 9.2 application on non-weblogic app. servers?

Similar Messages

Maybe you are looking for