Is it possible to run process chain from the certain process/point?

Hello
Is it possible to run process chain from the certain process?
How?
Thanks

Hello,
yes it possible! use the following steps.
1. Goto the process which you want the chain to start from.Goto display messages>> Chain tab. In the generated instance note the variant and instance.
2. Goto table RSPROCESSLOG and give variant and instance and get logid details.
3. t codese37>> run FM RSPROCESSFINISH.
4. give the deatils u have got in RSPROCESSLOG table here and say execute.
This will solve ur problem.
Hope this helps!
Reg
Deepmala

Similar Messages

Is there any way to execute process chain from the portal?

Hello,
Is there any way to execute process chain from the portal? I dont want to link process chain with any of report. I want to have a button in some of portal folders. User presses the button and it executes the process chain.
I was thinking about to create a fake planning cube, aggregation level and planning function. I call FM within the Fox planning function that runs the process chain. But it should be done within the report.
Any ideas?
Thanks a lot in advance!

Hi.
I want to have a button in some of portal folders
You mean that you want to use some link in EP ?
Regards.

Is it possible to run an application from a user or container login script?

Is it possible to run an application from a user login script or a container login script?
A "Force Run" application object works fine if the user's workstation is setup to auto-load "Application Window" or "Application Explorer" but in this case I'd like to run an application when someone does a manual login (ie. they right-click red "N" and choose "Novell Login...")
Using a User Package's "Scheduled Action Policy" and the Event=Login also does not work when a user logs in manually. This type of Event seems to only apply when the user first logs into the workstation, not at a manual login.
Thanks,
Marc

> Is it possible to run an application from a user login script or a
container login script?
Yes, see the documentation:
http://www.novell.com/documentation/...a/a7q6999.html
Regards
Rolf Lidvall
Swedish Radio (Ltd)

Is it possible to run host command from SAP environment? How do you run?

Hi
Is it possible to run host command from SAP environment? How do you run?
Thank You

Hello Subhash
You will more details in the following thread:
Re: How to define command for SXPG_COMMAND_EXECUTE
Regards
Uwe

Is it possible to run BBC iPlayer from an iPhone4 through AirPlay to Apple TV2 please? I keep getting the message "An error occured loading this content. Please try again later"

Is it possible to run BBC iPlayer from an iPhone4 through AirPlay to Apple TV2 please? I keep getting the message "An error occured loading this content. Please try again later"

First, try a system reset on the iPod. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If that doesn't work, reset the Apple TV. I'm not at mine right now and I'm talking from memory but the reset is somewhere in the Settings menu.

Is it possible to run Rules/Seq from SmartView while connected to Essbase?

Is it possible to run rules/sequences from SmartView while connected to Essbase URL in 9.3.1 version?
Current environment does not have planning and we have to run rules while connecting to Essbase.
Using http://<<ServerName>>:9080/aps/SmartView URL.
There seems to be no way we can do it. Referred to DBAG, Planning and SV document but not mentioned.
Thanks in advance!

Hi,
If you have attached you business rules to Essbase database connection in EAS, you should see them under Calculation Options. If you attached only Planning connection, you will have to connect to Planning in Smartview to execute business rules.
Else, you will see only calculation scripts attached to the Essbase application.
Let me know if it helps.
Cheers
RS

Is i possible to trigger a workflow from the creation of an event in iCal

Is i possible to trigger a workflow from the creation of an event in iCal
Or is is possible to create a workflow to ad events to an iCal calendar which then triggers the workflow or is combined with the ad events workflow.
Graeme

Hmm, nope. Not that I'm aware of. Very few apps allow you to hook scripts directly to user activity. Finder* is a notable exception. iCal's "publish" feature has the ability to auto-update after user activity, but you'll either need dot mac accounts or your own webdav server to get that working.
I'd re-consider the idea of triggering a periodic workflow with iCal. That way if the computer is shut down or asleep, iCal will wait to run the workflow at its next opportunity. You could hide the unsightly repeating events in a second calendar so they're out of the way.
The next best thing is to write a faceless AppleScript application with a long-duration idle handler. The user would simply add it to their login items in System Preferences. This would also resume its cycle after sleep or shutdown.
Yet another option is to write an AppleScript that can register itself in the crontab. This has the advantage of running at a predictable time. If you're careful, you can even set the script to wake up or power on the computer as necessary.
* Folder action scripts can be triggered when files are created, moved, or deleted, but not when they're merely updated. This probably rules out much of iCal's activities in ~/library/application support/ical/.

Scoping out Sharepoint - Is it possible to run web apps in the same domain as a web page? (ie not with references to a cloud)

From what I understand, with sharepoint it is possible to run web apps on the server that don't need to be referenced via the cloud, ie in contrast to SkyDrive.
If so, would it be possible to create a web site on the share point server that embeds say a word web app in a page, all done in the one server, on the same domain?
Thanks

Hi,
First Office Web Apps and SharePoint can't be installed in one server as it's not supported. So you need at least two servers - one for SharePoint and another for Office Web Apps. About 'word web app', As far as I know you can run word app/excel app runs
in either word/excel but not inside Office Web Apps.
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com

I am unable to run several iMacros from the commnd line concurrently

The documentation implies that you can run concurrent iMacros by starting Firefox sessions under different profiles. I have tried this, but if I run Firefox from the command line it only takes note of the -P (profile) option if I am also specifying -no-remote (start in a new process). the problem is that to run an iMacro from the command line you have to start a firefox session first, then wait briefly before making the actual firefox call to your iMacro. So I can start a number of separate Firefox sessions under different profiles OK, but when I try to call my iMacros they might go to any of the sessions, and they just end up all hanging.
If I start my Firefox sessions then go into them manually, I can start the iMacros one iMacro in each and they run fine concurrently.

Are these newly purchased films or films purchased in the past that you want to re-download ? The 'check for available downloads' will check for things such as pre-orders that haven't been downloaded yet, and (I think) automatic downloads - it doesn't check for things which you've downloaded in the past but which are no longer in your library. If they are past purchases, then depending upon what country that you are in (films can't be re-downloaded in all countries), and whether they are still in the store (film studios occasionally remove them) then they might show under the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes for re-downloading.

Midp 2.0: is it possible to run 2 timers at the same time?

elo! jz wondering if its possible to run 2 timers at the same time..

actually, im going to use the first timer for the character's animation such as walking.. the other timer i'll use for timing the 'walking activity' of the character (let's say, 3 seconds walking).. after 3 seconds, the character will stop and do other activity aside from walking..
p.s.
im mentioning about timers in midp 2.0 :)

Stopping local chain from the meta chain

Hi ,
Can any one let me know is there any option to stop a local chain from the meta chain....
I have a meta chain in which 13 local chains are there.
In those 13 chains i want to stop one particular chain ,but i dont want to delete that local chain from the meta chain.
and below this local chain another dependent chain is also there.
which will start execute after that chain(which i want to delete)irrespective of the status whether the above chain is pass or fail.
can any one help me in this regards
Thanks in advance.

No, you cannot . The best solution I have is to change the local chain to bypass all activity in the local chain. This way the meta chain will run but nothing will happen within the local chain and the meta chain will continue to the next local chain.
Hope this helps.
PS- Another idea, change the meta chain and replace the local chain with an ABAP program which will execute the local chain (use FM RSPC_CHAIN_START). Then you can change the ABAP program to decide whether or not to execute the local chain.
Edited by: Geo on Apr 2, 2009 10:11 AM
Actually, you might be able to do something creative using "Decision Between Multiple Alternatives".
Edited by: Geo on Apr 2, 2009 10:16 AM

Prompt if you please, to me are necessary programs making it possible to draw off music from the network VK, program- analog Ward, program- analog of adob Flesch pleer. if there are free, the thanks a lot

prompt if you please, to me are necessary programs making it possible to draw off music from the network VK, program- analog Ward, program- analog of adob Flesch pleer. if there are free, thanks a lot

Hi Christoffer,
Thanks for the reply, excellent information! I was a bit struggling with the availability of the tokenGroups attribute, but your info makes it pretty clear.
Do you also happen to have experience with the LDAP_MATCHING_RULE_IN_CHAIN method to retrieve nested groups? It seems to perform pretty well, retrieves all nested groups using the memberOf attribute and works on all AD environments (W2K3 SP2 or higher).
Richard Mueller did a performance test using both methods:
http://social.technet.microsoft.com/Forums/fr-FR/f238d2b0-a1d7-48e8-8a60-542e7ccfa2e8/recursive-retrieval-of-all-ad-group-memberships-of-a-user?forum=ITCG
User with 14 groups:
Method                      Groups   Ave. (10 runs) 1 standard deviation
LDAP_MATCHING_RULE_IN_CHAIN    11     0.1664 sec.   +/- 0.0325 sec.
tokenGroups                    13     0.0895 sec.   +/- 0.0038 sec.
Recursive memberOf             11     0.0774 sec.   +/- 0.0021 sec.
User with 308 groups:
Method                      Groups   Ave. (10 runs) 1 standard deviation
LDAP_MATCHING_RULE_IN_CHAIN   305     0.2664 sec.   +/- 0.0151 sec.
tokenGroups                   306     1.2147 sec.   +/- 0.0271 sec.
Recursive memberOf            305     1.2813 sec.   +/- 0.1190 sec.

HT3964 My 2012 MacBook pro has a fan running on high from the moment I turn it on and my battery has an 'x' on it.someone please help.

My 2012 MacBook pro has a fan running on high from the moment I turn it on and my battery has an 'x' on it.someone please help.

You should contact AppleCare as soon as possible.
MBP is in warranty for 1 year from the date of purchase.
AppleCare: 1-800-275-2273.
Standard troubleshooting step for these kinds of issues is to reset SMC.
Reset SMC. http://support.apple.com/kb/HT3964

Is there a possibility to open raw files from the Nikon D750 in photoshop elements 11?

Is there a possibility to open raw files from the Nikon D750 in photoshop elements 11? I allready tried to install camera raw 8.7.1 but it doesn't work.

Yes, I see:
Letzte Aktualisierung
16.04.2012
The link I gave is listed in the faqs of this forum.
Photoshop Elements FAQ List
mfG
Michel

Is it possible to retrieve deleted items from the Pages App please?

IIs it possible to retrieve deleted items from the Pages App? Thanks

From within the Pages app, no. If you have an iTunes or iCloud backup that would have contained the file, and you are backing up Pages, it could be received via a restore using that backup (this would wipe out any newer data however).

Is it possible to run process chain from the certain process/point?

Similar Messages

Maybe you are looking for