Is it possible to run RoboHelp 8 with VSS on Windows 7

Is anyone aware of whether it is possible to use VSS with RoboHelp 8 on windows 7? My understanding is that robohelp is fully compatible with windows 7 however i have not seen anything specific on using VSS as source control and given my recent experiences after upgrading i think it may not be possible.
Basically after upgrading from windows xp to windows 7, i reinstalled robohelp 8 and VSS. I then got the latest version of my project down to my c: drive and double clicked the xpj file to open the project.
As RoboHelp is loading i get the following error:
I click yes but nothing happens and RoboHelp continues to open. Strangely once it has opened, there is no link to Version Control from the File option and no option to select the Version Control toolbar!? It's as if it just doesnt exist at all.
For reference i am using RoboHelp HTML, Version 8.0.2
Any advice or help would be much appreciated.

SDSputnik wrote:
Noooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo Why does Mac have to be expensive?!?!
PC's are cheap and nasty, why is that so?

Similar Messages

Since I use Mac os x mountain lion it is no more possible to share files with my pc windows 7. Does somebody know how to solve this problem?

Since I use Mac os x mountain lion it is no more possible to share files with my pc windows 7. Does somebody know how to solve this problem? I have been answered by an Apple technician that with the new Mountain Lion the problem was with Windows. I am not convinced.

I have renamed my pc and everything is ok with the file sharing SMB. Both my iMac and my pc can share files very easily.

Is it possible to run Rosetta with LION and if yes, where may i find it ?

J'ai mis en marche Lion et, malheureusement, je ne peux plus utiliser Go LIve, et Ragtime car ils tournaient sous Rosetta .
Y a-t-il une solution ?

For these situations (Quicken Deluxe 2002, Microsoft Word/Excel 2004, Adobe Photoshop GS), I run Snow Leopard (with Rosetta) in Parallels 7 within Lion. Installing it in French would be an interesting challenge!

Is it possible to run ipx with the 4402's and 1131 ap's

My current environment is 2 4402 controllers with 20 1131's Lwap
wlans work fine using WPA2/AES/802.1x/EAP-Fast using Cisco ACS v4. to external db Microsoft AD for creditionals.
My question, is it possible to get Ipx working, we have a large group that requires access to novell, unfortunately,
i've heard it is possible to enable ipx.
Any ideas..
thanks
Kevin

Hi Kevin,
I came across this WLC note;
Q. Does the Cisco 4400 Series WLC support Internetwork Packet Exchange (IPX) protocol? Does any Airespace product support IPX protocol?
A. No, IPX protocol is not supported on any platforms of the Cisco WLC.
From this good Q&A doc;
http://www.cisco.com/en/US/products/ps6366/products_qanda_item09186a008064a991.shtml
Hope this helps!
Rob

How is it possible to run MSL with JDeveloper?

Do I need a third party JDBC driver?

Maybe this tip can help you
http://otn.oracle.com/products/jdev/tips/duff/mysql_and_oc4j3.html
(Also linked from the JDeveloper tips page.)

Is it possible to run my Labview software in Windows 7

Hi there,
I currently use Labview 8.2.1 and Labview DSC 8.2.1.
But within a short time I want to switch from Windows XP to Windows 7.
My question now is:
Is it possible to switch to Windows 7 without any problems?
Will the Labview software still run under Windows 7 without problems, or do I have to download new drivers or other software?
I hope to get a reaction soon.
Greets
Message Edited by Cheese11 on 03-22-2010 02:37 AM

Hi Cheese,
Official LabVIEW support/compatibility with Windows 7 is explained under the following articles.
National Instruments Product Compatibility for Microsoft Windows 7
Windows Version Compatibility with LabVIEW
LabVIEW Module and Toolkit Compatibility Information
On the forums, people seemed to have mixed reviews about older versions of LabVIEW with newer versions of Windows 7. Another piece of food for thought is Windows 7 (some versions) contain a "Windows XP Mode", which MAY allow you to run this version of LabVIEW in 7 however as the above articles show this is not the supported version. Essentially the XP mode allows virtualisation of XP OS on Windows 7. I've not personally tried it with this version of LabVIEW, but it's just an idea!
Windows Virtual PC
Upgrading to the latest version of LabVIEW will work and is fully supported.
Hope this may help
Ashish Naik
Field Sales Engineer
National Instruments UK

How to run programs with older version (windows 98)

I purchased a software that runs on WINDOWS 98 system..VIRTUAL DJ SOFTWARE..BUT, I cannot run it on my system, which is: WINDOWS 7..HP Notebook G72B54NR..MY QUESTION: "IS THERE A WAY FOR ME TO ALLOW MY HP NOTEBOOK TO ALLOW THIS OLDER VERSION TO OPERATE ON MY WINDOWS 7 SYSTEM"?

Do you recieve any kind of error message when trying to run it?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Is it possible to run 5.5 on windows 8.1??

Is it possible to run Photoshop 5.5 on Windows 8.1? I have a CD which I tried to run but when I click on install nothing is happening. I have CS6 trial already running on the laptop, so my question is, is it because I need to uninstall CS6 (although I haven't got a warning message come up to tell me to do that first before running 5.5, so don't want to get rid of the CS6 trial without making sure that it is the problem) or whether 5.5 will not run on Windows 8.1 anyway.
Your time and advice would be greatly appreciated, as need to know whether I need to return the 2nd hand 5.5 CD.

Thanks so much Gene. I really appreciate your time and suggestions.
Btw, should have been clearer as one couldn't imagine I meant that 5.5 (i.e. ancient one). The adobe website also has this info: Windows 8.1 compatibility for Adobe Photoshop version 5 which just says version 5.5 under compatibility. So it does seem possible indeed to run this but perhaps for someone more techie. Had a look at the thread re: 6.0 and tried to run it as admin. Tried copying the contents on the desktop and change the compatibility under properties (even ran compatibility trouble shooter under properties) - but in vain. Must be doing something wrong. Prolly easier to return the CD (:/)
If anyone could drop an idea in relation to how/where to buy a genuine and legal copy of a CS5/CS6 I woudl greatly appreciate. I bought the 5.5 off eBay and probably will search for the right version this time on there again. But it's a bit of a question mark for me in regards to how do I make sure that I buy a genuine licenced version which I can register with the Adobe.

Is it possible to run a JAR?

My high school Computer Science teacher thinks it might be possible to run a JAR file in windows and have it run the java program (command promt type) in windows. I do not believe this is possible but he wanted me to check and see.
Also is there any other way to run a java program in the form of class files without going through the DOS prompt or a compiler? Duke dollars if you know a way.

when you install the JRE it should associate jar files
with the JVM, hence double-clicking on them will run
them. but....well... strictly they become associated with javaw
to make a jar an executalbe jar it needs a
'main-class' attribute in the manifest. That is make
a directory that goes in to the jar called META-INF
and in there a file called manifest.mf (just a plain
text file).thought i had already mentioned that!
test from the command line with
java -jar myjarfile
or
javaw -jar myjarfiledouble-click issues an identical command - if it doesn't work one way then it won't work the other
the difference between the java and javaw is that the
javaw will not open a DOS window. true!

Is it possible to run Add-On application seperately from Windows?

Hi,
Is anyone know if it is possible to run the Add-On from Windows with SAP B1 client ? For some reasons, i can't install the Add-On my server now during my development, but i need my QA tester to test these existing finished Add-Ons. Can I just pass all compiled binary files to my tester and let him run the Add-On from his PC and test it in his SAP B1 client? I tried, but it always gives me application crash error. But the add-on runs very well after installed in the the SAP B1 or under visual studio developping mode.
Thanks,
Lan

Hello
Yes it is possible. You can run the addon the same parameters as you run in the development environment. You can use the same connectionstring used during development.
1. Copy you addon into a folder
2. Create a bacth file (start.bat) with notepad, and enter there your addon name and the connectionstring
3. Run the batch file.
It will start and connect to sap b1.
I am also using this method to test the addons .
Regards
J

Problems with VSS and RoboHelp on second machine

Hi all,
We chose to use Visual Source Safe as our source control tool
to use with RoboHelp. To build the VSS database containing the help
project on the server, we successfully used the version of our help
project on my machine. I have had no problems using it for the last
several weeks. Everything works great. Files are retrieved, checked
out, and checked back in with no issues.
The problem is we have been unable to successfully set anyone
else on the team up with the VSS-RoboHelp source control. Since
we're not building the database from scratch, the way we did with
mine, we're trying to "get" the version from VSS on the server and
place it on her machine. I'm guessing this is the way to do it, but
we don't know how. When we try to get the version in source
control, only the top level of .htm topics are retrieved, not
anything that is nested in child folders. Then, when we attempt to
open the help project on her machine, we get all sorts of errors
ranging from "corrupt .cpd" files to "invalid characters" to "the
local version is different from the version in source control"
(DUH!). We tell it to get files from RoboHelp when we try to open
the help project on her C drive, but it doesn't download them
correctly, and invariably RoboHelp crashes.
Has anyone successfully used VSS with RoboHelp, and if so,
how do you get a new computer set up with an existing RoboHelp
project that is already in VSS? I need exact steps, if possible,
since it's not intuitive (or since we're just clueless).
I really appreciate any help anyone can offer!
Thanks!
Lisa

Hi Kathy,
Thank you for your response. I'm not sure we're on the same
page, but it just may be because I'm so new to this. The problem
isn't with checking in or checking out files -- It sounds like you
might be at step 5 and we're still at step 1. The problem is with
getting the entire help project down from source control to her
machine the very first time. For example... Imagine a new RoboHelp
author who has just started with the company and has just gotten
RoboHelp and VSS installed on her machine. We now need to get the
project down from VSS to her machine. We can't check out or get
anything yet because the project hasn't even come down to her
machine yet. RoboHelp on her machine doesn't even know about this
help project out there. We open RoboHelp, and there's nothing on
her C drive to browse to because the project isn't even there yet.
I believe our infrastructure guy (who has been trying to get her
set up with this, but is as much in the dark as I am) was trying to
somehow "get" the files from VSS to her C drive from within VSS,
but obviously that didn't work because it only grabbed the
top-level files. I don't know if any of this makes sense. I thought
there'd be a way, in RoboHelp, to tell it that we have something
out in source control, and "please go get it." It doesn't seem to
work that way.
If you and I *are* on the same page and I just don't
understand, I apologize, in which case do you mean she's supposed
to check out files or get files from within VSS? Apparently that's
what the infrastructure guy did, and it didn't work. She needs to
be able to work on these help files just like I do, so she needs to
be able to get, check out, and check in. Or do you mean we need to
check out or get files from within RoboHelp?
Color me confused... :P
Thanks,
Lisa

Is it possible to run an IdocScript Query with Service GET_SEARCH_RESULTS?

Hi All,
I need to run the below query with GET_SEARCH_RESULTS service.
dDocType <matches> `ArchivePackage` <AND> xSubmissionDate < `10/08/13 11:03 AM` <AND> xArchiveDocName <EQUALS> dDocName
Part of this query works fine but when the part in BOLD is also used I get an error, reason being there is nothing like <EQUALS> when using QueryBuilder
Instead is it possible to run the below idocscript with any service?
<$ (dDocType like 'ArchivePackage') & xSubmissionDate < dateCurrent(-365) & (XArchiveDocname == dDocname) $>
I tried it with GET_SEARCH_RESULTS, but got wrong results and no error.
Is this even possible or should I just change my approach?
Regards

I tried to search more info on this one. It is true that in all cases the operator is followed by a constant - see e.g. https://blogs.oracle.com/interactions/entry/ucm_get_search_results_with_full_text_search
Honestly, I see no reason why a reference to another metadata could not be made, but the parser might just fail on it. If you can, try to get an official answer from support via Metalink. Alternatively, you can decompile the code processing the service and check why parsing fails when non-constants are used.

Is it possible to run 3 DIMMs with Dual Channel on K7N2-Delta-L?

I was wondering whether it is possible to run Dual Channel with all 3 slots.
I noticed the manual said Dual Channel is only enabled when running 1/3, or 2/3.
However, friends with Asus and Abit boards of similar design (nForce 2 400 with 3 DIMM slots) told me they can run Dual Channel with DIMMs in all three slots.
Has anyone tried something like this with the K7N2 Delta-L?

Quote
Power: CompUSA 500W Specs
+3.3V = 15A
+5V = 42A
+12V = 19A
-5V = 0.6A
-12V = 0.6A
+5Vsb= 2A
Total 500W
the 3.3v rail is terrible.
i have 20 amps on the 3.3v rail and i have a generic 300w psu.
time to buy a new one and make that a antec enermax or any other good psu.
drop a post here if you want any advise on which psu you should buy
3.3v 25a
5v 35a
12v 16a
something like this is minimum of what you should have.
500w does not mean anything when looking at a psu.
an enermax 350w has almost twice the power output as a q-tec 550w.

Is it possible to run the vi with a button on the front panel?

Hi to all,
I was wondering if it is possible to run a vi with a button placed on the front panel.
Regards,
Palazzo

Palazzo wrote:
Run vi when opened is not useful in my application, I know that option, thanks.
Can you elaborate? Programmed as a proper state machine, have the program run in an idle state that only waits for for a button press.
There is no need ever to go to edit mode during execution of a finished program.
while I have written a demo Xcontrol to show that everything is possible, I strongly recommend against it. It makes no sense.
See here for the example and instructions. But please read the entire thread, though.
LabVIEW Champion . Do more with less code and in less time .

Is it possible to run a excel with vba program in IPAD

Hi,
I would like ask if it is possible to run a excel with vba program/macros in IPAD?
Thanks

I am not sure, but the best Free App is Google Drive, you get 15 GB free storage which you can upload photos , videos and files, pretty much amazing, also I have read news that Microsoft is planning to have iOS office 365 but cost annual subscription fees almost 99$ kinda lame, try also Cloudon App, is very nice app , you can use word , power point and Excel

Is it possible to run RoboHelp 8 with VSS on Windows 7

Similar Messages

Maybe you are looking for