Is it possible to run two GPS tracking apps simultaneously?

I have a couple of apps that track your position via GPS, like MotionX GPS. They run in the background under iOS 4.2.1. Is it possible to run two of these at the same time? Will they both get GPS updates from the OS as quick as they would if only one were running?

Before someone says "try it and see if it works," I plan to. I just haven't had a chance yet.

Similar Messages

  • Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details?

    Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details? (In order to be able to use the older applications no longer supported in 10.9)

    If you want to add a second partition to the internal drive (in Disk Utility, select the drive, then open the partition tab and just click the + button), you should first be sure that you will have enough room to accommodate whatever the second volume will be. I am currently doing this for Snow and Mountain Lion.
    To get to whatever volume is not the startup disk, restart and hold down option/alt at the chime, which will bring up a selection of the two volumes. Use the left or right arrow keys to select it and then hit enter/return.

  • Possible to Join Two Mono Tracks to Stereo, Or Change Panning of a Stereo?

    In the new Garage Band 11, is it possible to Join Two Mono Tracks to Stereo, or Change the Panning of a Stereo track, or split a stereo track into two mono files?
    Sometimes it would be convenient when I have a lot of tracks to combine two mono tracks into one stereo track to eliminate an additional track.
    Also, I find that I often want to change the panning of a stereo track to either make it wider, or merge the two channels, even reverse L&R. If no way to change the panning of a stereo track can a stereo track be split into two mono tracks to be panned differently?

    Woodwyn wrote:
    is it possible to Join Two Mono Tracks to Stereo
    only by exporting the two tracks
    or Change the Panning of a Stereo track
    you can pan a stereo track in every version of GB with the pan knob
    or split a stereo track into two mono files?
    indirectly:
    http://www.bulletsandbones.com/GB/GBFAQ.html#stereotomono
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    want to change the panning of a stereo track to either make it wider, or merge the two channels
    that's different. no, you'd have to split the track into two mono files as described above.
    even reverse L&R.
    same answer

  • Is it possible to run two different version of jre simultanously ?

    My client is using two diffrent application those supports two different versions of jre(1.2 & 1.4). If he uses jre1.2 only one application works ,and if he uses jre1.4 then the other works but the 1st shows error messege And vice versa.
    Is there any solution to shortout this issue?

    Is it possible to run two different version of jre simultanously ?Yes. In different processes, of course.

  • Is it possible to run two appl in a single node

    Hi folks,
    Plz tell me if it is possible to run two applications in a single node,coz I had deployed one and it is running fine but when I am going to deploy and run another one it is showing that "503 service unavailable" in the browser after the deployment.
    cheers
    prasenjit

    Can you please explain below
    Why your are creating Two VO's for one Table.
    What is relation between this two VO's??
    Thanks,
    Dilip

  • IS IT POSSIBLE TO RUN TWO DAQ CARDS?

     Hi all I am a newbie to Labview.  Is it possible to run two pci 6031e cards from one running  labview program ? I am out of i/o on the 6031e card  in my current program and need more measurement points.  So I simply want to run another 6031e from the same p.c. from the running program.  Thanks John

    80 (or even 800) LED's wouldn't be the culprit.  And it's pretty difficult to cram even 1 MB of code on a diagram, at least I'm pretty sure I've never managed to.
    Let's see...  There are 2 ways to save current values as default.  One is from the main menu bar, in which case ALL controls AND indicators will have their current contents saved as default.  I would guess that you've got some arrays / graphs / charts / etc. on the front panel as well, and that they had many 10's of MB in them when you saved current values as default.  You should empty them, and then redo that "save current as default" stuff.
    The other way to save as default is to right-click on the specific control / indicator you'd like to affect.  The menu selection you need is called something like "Data Operations...-->Save Current Value as Default"  This method will only affect the item you right-clicked.
    -Kevin P.

  • Is it possible to run TWO parellel configurations for one Object??

    SAP Gurus,
    We have a strange requirement from the client to have to configurations established in the system for one configuration object.
    Without taking much of your time let me paraphrase the requirements.
    The client is having two different types of putaway strategies in their current business process. And they toggle between these putaway strategies by reaching out to their production support group and they make configuration changes to have the other put away strategy
    One Step Putaway: GR area --> High Rack Storage
    Two Step Putaway: GR area --> Interim storage (area at the end of each aisle of high rack storage) --> High Rack
    Client wants to have two parallel configurations for both of these put away strategies and needs an ability to switch from one to another. This switching ability should be accessed from SAP screen without any IT intervention (no configuration)
    -  Switching ability should allow the warehouse manager to change from one step to two step put away strategies without any IT intervention.
    -  Switching ability should be accessed my SAP Screen (Z-transaction or something with a radio button to toggle around)
    Is it possible to have two configuration made for Putaway Strategies and switch them on/off depending on the warehouse needs??
    Your invaluable feedback on this will be highly appreciated.
    Thanks again folks,
    Dhaval
    Edited by: Dhaval Joshi on Mar 4, 2008 12:09 PM

    Q1--I don't believe it is possible. An organization can have multiple licenses tied to its main email address, for example, but then they are assigned to the individual users.
    Q2--Yes, you would just need to log out of your account within the CC desktop app prior to logging in on the other account.
    If you have any questions, feel free to reach out.

  • Is it possible to run two different apple tv units on the same network and play two different movies off of my iTunes library

    Is it possible to play two different movies on two seperate apple tv units on two tvs at the same time using the same itunes library

    AC is corret you can do that.  It might work a bit better for you if you use a wired connection vs a wireless one for the ATV's.

  • GPS Tracker app that INCLUDES Timestamps?

    I simply need to import GPS tracks into Google Earth that come in with time data so that I can use the Google Earth time slider and animate the track.  I can do this with Android using My Tracks.  I have attempted to use apps such as Motion X on the iPhone and while they can import a track they do not include any timestamps.  Does anyone know of an iPhone app that can do this? I've been looking for something like this for a while and have been getting no where.  Any help would be greatly appreciated.

    Have you contacted the support resources provided by the developer of the app and asked them about the problem?

  • Possible to run two BB phones off one computer?

    In our office we have an interesting set up for getting email from two sources, Hotmail and Outlook, to the bosses BB device. Direct forwarding to his BB's email works fine for Hotmail and Redirector works for his Outlook. Here's the catch, he just bought a Storm and now would like both his old BB and new Storm to get exactly the same emails so he can compare the two to decide which he likes better.
    Hotmail only allows you to forward to a single email address, and Redirector seems to only allow to forward to one PIN device. I don't think it is possible to forward to two phones from the same computer, but I could be wrong. Anyone think they have a solution?
    Also, DM will not allow syncing with more than one phone will it?
    Solved!
    Go to Solution.

    Sorry, you misunderstood me. I didn't say anything about Redirector. It won't.
    For the Hotmail, one--don't let it 'forward' to the BlackBerry, instead set the Hotmail up direct to recieve the push email as it is designed. As it is now, you are actually forwarding your email from Hotmail to some other address? Like a blackberry.net address? Use the normal, routine push setup with your BIS account.
    http://www.blackberryfaq.com/index.php/How_to_add_/_delete_email_addresses
    And, again, on the Redirecto, no go.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Is it possible to run two separate iTunes accounts on one ipad2?

    Okay, here's the deal.  I have one Ipad 2 that is shared between work and family.  I have a work account for itunes but I would like to use a separte account to make my own purchases.  Is it possible?

    Yes, it is. As a matter of fact, you can use as many account as you want.
    First, you have to create your own iTunes account. You can do so on your computer or on your iPad.
    On the iPad, go to the settings > Store > tap on your Apple ID > log out > connect > Create a new account
    Now you can use both.
    To switch between accounts on your iPad, go to the settings > Store > Sign in / sign out
    Then you can make your personal and professional purchases on the AppStore or iTunes Store.

  • Is it possible to run two applications at the same time on ipad.

    Hi,
    I would like to know of it is possible to play media apps (movies or bbc iplayer programs) while surfing the Internet with safari on ipad2. Even if I can't actually see the video while I'm surfing the net but can still hear it and can jump between the Internet and the movie without the movie stopping.
    Somehow I think the answer to this is no but then I also thought it wasn't possible to do print screen images with ipad until someone showed me how.
    Can anyone help?
    Thanks :)
    Locard

    Prior to iOS 6, it was possible to "multitask" with some media like playing audio from YouTube video while playing a game or surfing the web, but it changed in iOS 6.
    There are always a few surprises in major iOS releases, so who knows, it might work again in iOS 7. I never set my expectations for anything other than what Apple talks about publicly, but like I said, you never know.

  • Is it possible to run two Mac operating systems at one time?

    I am running snow leopard on my MacBook but have an older version of Photoshop that can only be run on tiger. Tiger is already installed on an external hard drive so I could just boot up into that bit would like to save some time. Is there software that allows simultaneous running of  mac OS like parallels desktop does for windows on Mac?

    It would seem reasonable that you might be able to do it.. use Disk Utility to create a new partition for the other MacOS and install it to that partition. You will treat each partition as a separate disk, and select the boot disk thru System Preferences. But this approach treats them as separate OS installations requiring separate boots and cannot be run simultaneously.
    I opened Parallels 6 on my machine and noticed Parallels will allow you to create a Virtual Machine with another OS and not just Windows.  I think you'll have to install MacOS from scratch though using the install MacOS DVD. I  haven't tried this approach but it seems like it might be succesful. Not sure what happens when Parallels "translates" between MacOSs though. 
    I don't think you can use Carbon Copy Cloner to install a MacOS to a Parallels Virtual Machine though.

  • Is it possible to run two versions of fcpx ?

    Hi there,
    I am running fcpx ver 10.08 and my OS is Mountain Lion 10.8.5.
    After upgrsding to Maverick, can I run both fcpx 10.0.8 the 10.1 ? If I can, then I do not need to update/convert the existing projects and events library to the new structure ...
    Thanks

    Hi there, I saw some youtube video, it says that after we update, FCPX will ask:
    "Do you want to move the old projects and events to the trash ?
    If you no longer need the old versions of your updated projects and events, click Move to Trash, To save them, click Save"
    So, the question are:
    1) if we click Save, our old Events folder and Projects folder will be saved in another folder ?
    2) if we click save, will this cause our disk drive to be doubled ?
    3) does this mean this is another chance to copy/backup the old Events folder and Projects folder ?
    4) after clicking Save, where will the files be saved ?
    5) after clicking Save, will the files in the Events folder and Projects folder be in hte form of old/exisiting structure or new structure ?
    Thanks

  • Best method/practice to run two loops (read + write) simultaneously in sync

    Hello,
    I thought I had a program working that could write and read simultaeously with reasonable accuracy, but have discovered it may not be as reliable as I thought (it sometimes gets out of sync/jumps steps).
    Is there a good guide, tutorial or recommended method to do this reliably, in sync and efficiently?
    Should I use notifiers? and/or timed loops?
    I have a write loop, which sends steps to some type of equipment (stepper motor or magnet etc) at no more than about 100 Hz.
    I have a read loop, which reads data from a detector (eg photodiode, the signal being dependent on the write step), at no more than about 1000 Hz (the read loop runs faster than the write loop)
    I then pass information from one loop to the other (one loop writes to a group, the other reads from it).
    I then save data to a file by saving the contents of the graph.
    Thanks
    Solved!
    Go to Solution.

    Jeff_Tech wrote:
    (1) .... in sync....
    (2) ... (the read loop runs faster than the write loop) ...
    Aren't these two statements a contradiction?
    There is significant information that you have left out, for example is it sufficient for the two to be in sync or is it also necessary that they occur at a very regular rate.
    In what way do the two depend on each other? Is this a control application where the output depends on the input in some way or is it simply a excitation/response pair.
    Are you doing software timed single point acquisition?
    Does it need to run for extended periods of time or it it just a finite sweep each time?
    In any case, the right thing do probably do is run both hardware timed from the same clock. Setup the output array for the AO and arm the AI, then start both running from the same clock (e.g. you could tie the AI conversion to the AO clock). Read the buffered AI data at leasure in a loop that does not need any special timing.
    Can you show us some code so we get a better feeling what you are doing?
    LabVIEW Champion . Do more with less code and in less time .

Maybe you are looking for