Is it possible to run VLM and lmtools on the same machine

hi together ... is it possible to run VLM and lmtools on the same machine without any problems?
the running system will be Windows Server 2008 R2 x64! maybe we will install the license server on the virtual server.

Hi SvenNittmann,
in general, it should be possible to run both tools (VLM and lmtools for FlexNet) on the same machine. But I wouldn't recommend you this way, because NI VLM is also build on top of FlexNet and sometimes you will receive ugly problems with the installation of both tools on the same PC. It is possible to use VLM in a virtual machine without any problems or restrictions. NI provides information about the usage of VLM in a virtual machine, like you can see here:
Volume License Manager on a Virtual Machine - National Instruments
http://digital.ni.com/public.nsf/allkb/5730FDDC97F9157E8625755F00749CFF?OpenDocument
I also use VLM in a virtual machine and I could recommend you the same solution.
Regards, Stephan

Similar Messages

Can you run CRXIR1 and CRXIR2 on the same machine?

I have CR XI R1 Developer edition installed on a workstation which I use to maintain imbedded reports in a large system written in VC++ V6, as well as several newer applications written in VB2003. The IT department issued me a new machine on which is installed VB2005. Now I receive errors in my VB applications when using the ExportToDisk function.
I understand that I need to upgrade to CR XI R2 to be compatible with VB2005. How will that affect my older code written in VC++ V6?

Well, you don't really need CR XI r2 to be compatible with .NET 2005 as .NET 2005 ships with CR 10.2. Now, if you want to be at CR XI with the COM apps (VB and C++) as well as .NET 2005, then you do need CR XI r2. (CR XI does not have assemblies for the 2.0 framework)
Personally, I would not recommend CR XI r1 and CR XI r2 on the same computer. Theoretically this should be OK, but from experience, I find that occasionally CR XI r1 and CR XI r2 just don't like to play together...
I'm not sure where you want to go with this now; resolve the export error, then move on, or?
Ludek

Running Leopard and Tiger at the same time VMWare fusion/Parallels?

Hello,
I was wondering, is it possible to run Tiger and Leopard at the same time? Some older applications won't run properly in Leopard. The iMac came both with Tiger and Leopard (last November). It has been described elsewhere that one can install Tiger and Leopard on separate partitions and switch by rebooting. But it would be nice if one could run Tiger in Leopard like one can run Windows/Unix using VMWare Fusion or Parallels. Is that feasible?
best wishes

I agree with you that virtualizing Mac OS X would be great. I'm an Apple technician and it would really help with my work. But Apple's EULA does not permit the use of OS X in a VM. They changed OS X Server's EULA recently to permit it, but not the "client version".
So your Mac can virtualize nearly any OS out there, but not OS X. And I believe (not sure) that a VM of OS X Server will only run on OS X Server.

How to run 2 weblogic instance in the same machine

is it possible to run 2 weblogic instance in the same machine ?
I have created 2 domains ...domain-1 and domain-2 in my hard disk and both of them have startWeblogic.cmd in them..
but i cant run them simultaneously though individually they run.
they differ by HTTP port and Debug port but still they dont run simultaneously
can you please comment ?

yea...i thought about it .
but as both of them are same application and they are using the same DB connection pool , JMS queue ....i just dont want to mix all these.
so i have created two seperate domian . and i run them individually and they work fine.
However , they are having different ports though .
But when i run the second one while the first one is running ....the second one does not starts up
here is the error when i click on startsWeblogic.cmd when the other is already running.
java version "1.4.2_08"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_08-b03)
BEA WebLogic JRockit(TM) 1.4.2_08 JVM R24.5.0-61 (build ari-49095-20050826-1856-win-ia32, Native Threads, GC strategy: pa
Starting WLS with line:
d:\bea\JROCKI~1\bin\java -jrockit -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.
=== Debugging ===
This window is necessary for debugging code using WebLogic Workshop
ERROR: Proxy already running...
weblogic.debugging.comm.TransportException
at weblogic.debugging.comm.ServerConnectInfo.createTransport()Lweblogic/debugging/comm/CommTransport;(ServerConne
at weblogic.debugging.engine.ProxyThread.run()V(ProxyThread.java:77)
at java.lang.Thread.run()V(Unknown Source)
at java.lang.Thread.startThreadFromVM(Ljava/lang/Thread;)V(Unknown Source)
Caused by: java.net.BindException: Address in use
at jrockit.net.SocketNativeIO.bind(ILjava/net/InetAddress;I)I(Unknown Source)
at jrockit.net.SocketNativeIO.bind(Ljava/io/FileDescriptor;Ljava/net/InetAddress;I)I(Unknown Source)
at java.net.AbstractSocketImpl.bind(Ljava/net/InetAddress;I)V(Unknown Source)
at java.net.PlainSocketImpl.bind(Ljava/net/InetAddress;I)V(Unknown Source)
at java.net.ServerSocket.bind(Ljava/net/SocketAddress;I)V(ServerSocket.java:318)
at java.net.ServerSocket.<init>(IILjava/net/InetAddress;)V(ServerSocket.java:185)
at java.net.ServerSocket.<init>(I)V(ServerSocket.java:97)
at weblogic.debugging.comm.ServerConnectInfo.createTransport()Lweblogic/debugging/comm/CommTransport;(ServerConne
... 3 more
Could not bind to Weblogic server (Error attaching to Weblogic Server.).
Message was edited by:
Unknown_Citizen

Designer 6i and 10g on the same machine?

I have Designer 6i and corresponding repository on my machine.
The problem with 6i I can't save diagramm in HTML format
I believe I can save in HTML format in 10g or other?
Can I install on the same machine 10g designer?
should I configure new repository?
TIA

See my update on your earlier question.
As for running 6i and 10g on the same machine, yes you can do it. You just have to install them in separate Oracle Homes, and be careful when you tell them which version of EXP and IMP to use. There is one MAJOR caveat, however. They cannot use the same Designer Repository - 6i client won't talk to a 10g repository and 10g client won't talk to a 6i repository. You can upgrade a 6i repository to 10g with the RAU, but take a backup before you do - the only way to go back is to restore your backup. Besides, I think that if you upgrade to the last supported version of Designer 6i (you should be able to get it from MetaLink) you will get the Publish Diagrams utility.
Frankly, my opinion is that there is only one reason to stay on 6i - if you need to generate and support 6i client/server Oracle Forms. If you don't use Oracle Forms, or if you have moved on to Web Forms with the middle tier Forms Server, I'd recommend an upgrade to Designer 10g and Developer 10g.

Is it possible to post cash and checks on the same deposit?

In US localization is it possible to post cash and checks on the same deposit

Hi,
It is not possible to have the cash and check in the same deposit.
Kind Regards,
Jitin
SAP Business One Forum Team

I want to run IIS and Form Server on same machine

Dear follows
I have problems , porblems is that i want to run IIS and Form
Server at same machine but i m facing some problems so please
inform me right proceduers to run this services at same machnine
now i m using Windows NT .
My secone problems is that i want to send emai via oracle
reports , actuall condition is that i have oracle report and i
want to add button and behind this boutton i want to add trigger
to send this report as a emai to client as txt/html format.

There shouldn't be any problem running both forms server and IIS
on the same machine. Just make sure the ports that are used are
different. IIS's default port is 80, so either change this port
number or change it for the Forms server's web listener.
You can send reports to email if you use DESTYPE=MAIL.

Can i run 9ias versions 1 and 2 on the same machine

i need to install 9ias versions 1 and 2 on the same machine but in separate databases, is this possible? if it is possible are there any issues that i need to be aware of?

You can install the portable Firefox 3.6.x version to access websites that do not work with Firefox 5+.
*http://portableapps.com/apps/internet/firefox_portable#legacy
*http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
*Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html

Running WEP and WPA2 on the same virtual AP

Hi Forum,
Is it advisable to run WEP and WPA2 on the same virtual AP sharing the same antenna?
rgds,
paul

Paul,
This shouldn't be a problem, so long as you have one SSID for WEP, and one SSID for WPA2. The antenna itself will not come into play for what type of encryption that is used.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Running RIPv2 and OSPF at the same time

What are the problems with running RIPv2 and OSPF at the same time if any? I have the gear capable of that and I have been doing this for over a year now. I wanted to get rid of RIP but my couterpart is scared because he is not OSPF skilled. I do have some remote sites with old 1601s to consider. Any suggestions or recommendations.
Thanks

Hi Friend,
OSPF is far better than RIP when it comes to performance and advatnages compared to RIP and no doubt in that though it is complex to implement compared to RIP but once done it is smooth.
It is important to have a very well designed network with OSPF otherwise the behavior is unpredictable sometimes and it may not give desired results.
Also for your low capability routers like 1601s you can put them into stub or total stubby area so that they may have less load on them.
HTH
Ankur

Why can't I run Safari and Skype at the same time without making my computer freeze up?

I can't believe I can't run Safari and Skype at the same time without my computer freezing up, it's a MacBook Pro with Mac OS 10.6.8 and it has an Intel Core 2 Duo CPU with 2.2 Ghz and 2 Gb of RAM. Is this a hardware problem or a software problem?

I haven't gone to the trouble of actually testing to see which uses more CPU power, but Firefox has been faster than Safari on every Mac I've ever owned.
To see CPU usage by process, open the terminal (in Utilities) and enter 'top' at the command line. You might have to expand the window as processes don't appear in any logical order.
It could also be hardware-related: I have late 2009 mini with similar specs and it pinwheels easily.

CS3 Bridge and CS4 on the same machine.

Hello Everyone,
I have adobe photoshop CS3 and Illustrator CS4 on my machine. Any known issues for running bridge CS3 and CS4 on the same machine? Some experts at telling me not to use Photoshop CS3 with Bridge CS4, just wondering. Thanks for you replies.

Bridge is not really a stand alone product, and tuned to work with its current version of PS. Also, Bridge CS4 has some features changed and/or added. So if using CS3 Bridge you might have aspects that don't work with PS CS4.
I would keep CS3 on the machine if you don't need the HD space, until you feel you no longer need the older version. But use them as a pair as intended. Also, only have one Bridge running at a time.
I did not upgrade to CS4, but from what I have read I see no reason to use Bridge CS3 as the upgrade is faster, less prone to crashes, and has added features.
CS4 PS on the other hand can be tricky if you don't have a newer computer with a good video card.

Replace a 2003 (not R2) File Server with a 2012R2 files server and preferably keep the same machine name and IP when finished

I am wanting to replace a 2003 (not R2) File Server with a 2012R2 file server and preferably keep the same machine name and IP when finished. For the moment I just need some "high level" guidance, little details can be worked out once I know
which direction I will go. I was considering that DFS might be a way to help get through the process although when finished the 2012R2 Files server will be by itself with no other file server planned at this time. DFS can stay installed for maybe
future purposes but clearly I wouldn't need the DFS Replication with only one machine.
Here's a few details of the environment....
1. DC's are 2012R2 but it is still 2003 DFL because the old 2003 DCs are still present. But likely they will be gone and the DFL elevated before I start on the File Server project
2. Nearly all machines in the facility have a shortcut on the "All Users" Desktop that points to the existing old File Server. Editing or replacing that shortcut would be a major pain,...hence why I want to keep the same machine name at least,
and maybe the same IP if not too much trouble. This way the existing shortcut would continue to work with the new 2012R2 File Server. The UNC path represented in that shortcut is also configured into one or more of our major business applications,
futher emphasizing the need to keep the UNC path the same throughout the process.
3. The facility runs 24/7/365 but is "light" on weekends. The political environment is such that there is little to no tolerance for any down time at all.
4. Would DFS (based from the 2012R2 machine) be a good tool to get where I need to go?
Thanks for any suggestions.
Phillip Windell

Hi Sharon,
I've done some more reading and have a few new ideas to run past you....
Yes regular DFS wouldn't help and the Namespace would still be different than how it was with just the old server. However I was thinking DFS Replication could replace the purpose of RoboCopy and it would keep the two locations "in sync" until I was ready
to flip over to the new server. DFS Rep can exist independently of a DFS Namespace, so a Namespace is not even needed. It needs a minimum of 2003R2 for the "later & better" DFS Rep but I believe 2003 can do an "in place" upgrade to 2003R2, so I would upgrade
the old server to 2003R2 first. As long as the DFS Rep on 2012R2 and 2003R2 will properly interact I think that will work.
Thanks for the reg info on the Shares. I'm debating if editing that would reg file would really be much better than manually creating the Shares on the new server while the DFS Replication was doing its job. I'll probably export that Key as a
safety move whether I use it or not.
Once the DFS Rep is fully in sync and the Shares are in place on the new server, I figure I would then:
1. Remove the DFS Replication Object (optionally remove DFS Services completely)
2. Rename the old File Server to something else and set it to DHCP
3. Rename the new File Server to the name I want to use and give it the IP the old server had.
How does that sound?
Phillip Windell

What is the best way to have access to OSX and OS9 from the same machine?

What is the best way to have access to OSX and OS9 from the same machine?
Do I need to partition the hard drive? Installed both Tiger and OS 9 on the G5 and it is having problems starting up properly.
G5 Mac OS X (10.4)

And here is the prove for Edwin's message: Macintosh: Some Computers Only Start Up in Mac OS X

Is it possible to run VLM and lmtools on the same machine

Similar Messages

Maybe you are looking for