Is it possible to save as EPS file?

I am making a logo using a couple of different fonts - no graphics. Is it possible to save as EPS file? Or, if not - is there a way to export it to another program that will save it as EPS file?

OP - here is a thought.
First, a Photoshop PDF with transparency is acceptable for InDesign. But many people want a flattened format to place in older programs such as Quark 6, or Pagewrecker.
They often use EPS. Photoshop will outline all fonts in the EPS output. Also with EPS you do not have a dual file format, so you must save a copy. These are two fundamental differences between Photoshop EPS and Photoshop PDF.
Here is another option if you need flattened output, but you still want the PSD info wrapped in a single file.
Save as Photoshop PDF, layers checked.
Select "PDF/X-1a" preset. By the standard, choose "None", When you do this "Photoshop Editing Capabilities" should default to enabled (if not, enable it)
When you save in this fashion, you are saving a flattened PDF output with vector data for other applications, but you also retain the native Photoshop file. This file can be opened for editing in Photoshop and can also be opened for evaluation in Adobe Acrobat.
Please, please be wary of Photoshop fonts. The fonts are embedded subset in the PDF, but sometimes you encounter glyph width errors when preflighting the PDF in Acrobat.
Photoshop has vector capabilities, but these capabilities are half - baked. Each and every font glyph becomes a clipping mask for pixel data. Not an ideal construct. For some RIPS, Photoshop fonts can blow up like dynamite.
I'm not trying to discourage utilizing Photoshop vector. But if possible, set your type in InDesign or Illustrator, it's safer in the long run.

Similar Messages

  • HT201361 Is it possible to save the screenshot files to a different folder than desktop. How can I change the folder?

    Is it possible to save the screenshot files to a different folder than desktop (that is the default). How can I change the destination folder? Thank you, Sal

    To change the screenshot capture location to a new place on your Mac, first think of a location that would serve you properly. We like to place ours in a "Screenshot" folder located inside of the User's "Pictures" folder. To change the location to this new location, open the Terminal and enter the following command:
    defaults write com.apple.screencapture location /Users/[u]/Pictures/Screenshots/
    Replace "[u]" with the name of the user on your system. Once you have entered this command, let's restart the screen capture utility by restarting the SystemUIServer by entering the following command:
    killall SystemUIServer
    You can optionally log out and back in instead of entering this second command, thus restarting the SystemUIServer. Once restarted, all screen captures taken from here on out will end up in your /Pictures/Screenshots/ folder in the User's home folder on your Mac.

  • I cannot download and save an eps file in Adobe Photoshop Elements 12

    I am unable to open and save an eps file in Adobe Photoshop Elements 12

    No, EPS is one of the formats that adobe removed support for, starting with PSE 11.

  • Is it possible to save RoboHelp 7 files as .HXS files?

    Is it possible to save RoboHelp 7 files as Microsoft Help 2.0 .HXS files for integration with MS development products, such as Visual Studio? If not in v7, then how about v8? Thank you.

    Hi Brian
    RoboHelp 7 or 8 does not understand Help 2. So the short answer here is no.
    You might investigate FAR. I believe FAR will allow creating Help 2.
    Click here to visit the FAR site.
    Cheers... Rick
    Click here for Adobe Authorized Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • Is it possible to save an Illustrator file as an older version?

    I am running the latest version of Illustrator. My client has an older version of Illustrator. Is it possible to save it in an older format so it can be opened by my client?
    Thanks

    Yes, you can choose the version of the file you are saving in the Illustrator Options window (second save dialog) at the top. But be advised that if you used any version specific options, they may not work the same in an earlier version (Drop Shadows [Gaussian Blur] items being the most obvious).

  • Is there a possibility to open a EPS-File within Adobe Photoshop Elements 11?

    Hi there!
    I'd like to know, if there is a way to open and render a .eps file within Photoshop Elements 11?
    Greets
    Noah

    EPS Tiff Preview
    Use File->Open As
    Generic EPS (AI3,AI4,AI5,AI6,AI7, AI8,PS,EPS.AI,EPSF,EPSP)
    Drop EPS Parser.8BY (C:\Program Files (x86)\Adobe\Photoshop Elements 8/9/10\Locales\en_US\Plug-Ins) from some recent old versions in E11 Plugins folder

  • Is it possible to save an idvd file as a .avi file to transfer to beta sp?

    I need to save a imovie to idvd as a .mov or .avi file in order to transfer to a beta sp tape. Is this possible to do on idvd?

    Is this possible to do on idvd?
    No
    iDVD is for mpg-2 encoding content to be put on DVDs.

  • Is it possible to save a HAR file programatically using c#

    Hi All,
    I am trying to automate omniture testing, for that i want to capture HAR file through code. Is it possible to do that. 

    ya this might help. 
    thanks a lot
    is there any c# code equivalent for this. Also is it available for all browser
    I am afraid there is no build-in method in .NET framework.
    Based on this link, It related to Chrome API, you should ask  in Chrome official Website. Thanks.
    Best regards,
    Kristin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Illustrator CS2 Can't Save EPS Files

    I'm running Illustrator CS2 on a PC with Windows XP, and while I can save Illustrator files in AI and PDF formats with no problems, and export files also without problem, when I try to save an EPS file it brings up an alert box that says "Can't save the illustration". For obvious reasons this message is not helpful in determining the problem or going about a solution. I would greatly appreciate any help as this is a problem at my workplace and I have some time sensitive projects I need to finish. Thanks in advance.
    Regards,
    Ryan Drayson
    Villa Olympic Inc.
    www.villaolympic.com
    www.inner-flow.com

    Most likely some color separation or transparency flattening thing. Could also be the order of your groups/ shapes. Just hard to tell. For testing, I would save a PDF and do a preflight check in Acrobat or other such tool. This usually reveals any problematic stuff...
    Mylenium

  • Acrobat always saves eps Files with only 150ppi

    Hello Community,
    i have a problem with Acrobat and EPS files. Ive searched the whole forum and tried alot but cant figure out how to get it to work. So the problem is, that i have PDF files that i want to save as EPS files. The PDF-Files are saved as 300ppi (already checked it with preflight). But when i save it as an EPS-File and check it again its all set to 150ppi (149,xx). I set everything to "high quality", checked/unchecked "use maximum JPEG2000 resolution" and so on, but always with the same results - 150ppi. Maybe someone knows what i'm doing wrong?
    Thanks a lot and best regards
    Now something strange happened. I changed some presettings in acrobat that say "convert to PDF - postscript/EPS" and changed it from "standard" to "high quality print". Now all my EPS files, even the one shown as 150ppi that i created before, now is shown as 299ppi in the menu preflight -> all grey pictures (they are grey). How can this be? Maybe i dont get something right?

    PDF Optimizer works on a individual documents. I'm looking for a way to make the compatible version a default for combining images. Specifically when using the Combine files in the right mouse context menu.
    Thanks

  • Save as EPS and maintain layers?

    Hi,
    Is it possible to save a .psd file as a .eps and maintain the layers? When I convert the file to EPS, the layers are merged. I don't see an option in the "Save As" process that would prevent this from happning. Thanks!

    OP - here is a thought.
    First, a Photoshop PDF with transparency is acceptable for InDesign. But many people want a flattened format to place in older programs such as Quark 6, or Pagewrecker.
    They often use EPS. Photoshop will outline all fonts in the EPS output. Also with EPS you do not have a dual file format, so you must save a copy. These are two fundamental differences between Photoshop EPS and Photoshop PDF.
    Here is another option if you need flattened output, but you still want the PSD info wrapped in a single file.
    Save as Photoshop PDF, layers checked.
    Select "PDF/X-1a" preset. By the standard, choose "None", When you do this "Photoshop Editing Capabilities" should default to enabled (if not, enable it)
    When you save in this fashion, you are saving a flattened PDF output with vector data for other applications, but you also retain the native Photoshop file. This file can be opened for editing in Photoshop and can also be opened for evaluation in Adobe Acrobat.
    Please, please be wary of Photoshop fonts. The fonts are embedded subset in the PDF, but sometimes you encounter glyph width errors when preflighting the PDF in Acrobat.
    Photoshop has vector capabilities, but these capabilities are half - baked. Each and every font glyph becomes a clipping mask for pixel data. Not an ideal construct. For some RIPS, Photoshop fonts can blow up like dynamite.
    I'm not trying to discourage utilizing Photoshop vector. But if possible, set your type in InDesign or Illustrator, it's safer in the long run.

  • Opening an EPS file in Illustrator

    Hello,
    How come Illustrator doesn't honor the BoundingBox comment of an EPS file? Whenever I open an EPS file in Illustrator the page size is always the default size, not the size specified in the BoundingBox line of the file. Is there a setting within Illustrator that will enable this?
    Thank you,
    Paul

    Hi Karsten,
    The EPS files are for use with LaTeX. Some of the EPS files I have were produced from other applications and are a lot leaner in size than if produced by Illustrator.
    Also, when I save an EPS file within Illustrator, I have to open it up in a text editor and remove everything after %%EOF.
    Is there a special PostScript code for specifying the page size for use in Illustrator?

  • Save a attachment file in the shared folder of receiver using ABAP report

    Hi all
    Is it possible to save an attachment file in the folder of receiver's desktop using ABAP report?
    I am using the standard mail sending code to mail the excel file as an attachment.
    Consumer wants that file to be stored automatically in the folder of a shared drive he is using.
    Is it possible?

    You can do that via class CL_GUI_FRONTEND_SERVICES method gui_download. But this is not working in background. Reports running in background cant reach presentation servers.
    If you have XI/PI in place you can set up a scenario for that.

  • Is there a way to keep your original Illustrator EPS file open after saving it as a PDF?

    After I create artwork in Illustrator, and save it as an EPS, I have to then save it as a PDF so I can email it to the customer for proofing/approval. The pain in the behind part is that once I save this EPS as a PDF, I have to close the PDF then reopen the original EPS to continue working on it/view it, whatever. I know in InDesign, once you save your EPS file as a PDF file, the original EPS file remains open. Is there a setting in Illustrator that will work the same way? And if not....Why not?!

    Now can you to anything about bad drivers, inconsiderate people, telemarketing phone calls, bad hair days, etc.
    HA I wish, let me know when you find a resolution to those problems.
    Glad I could help

  • Save as TIFF file

    Trying to save a still from a QT video file
    video plays OK and I can save a still but whatever settings I make in options it only saves as a pct file
    is it possible to save as other file types such as TIFF?

    No, you will have to use another application, like GraphicConverter, to convert the pct file to a tiff or jpg.

Maybe you are looking for

  • 2009 Macbook Pro 13" Yosemite Display Port Freeze

    I have a 2009 Macbook Pro 13" 2.26 Core Duo 8gb Ram Nvidia Geforce 9400M 256mb Yosemite 10.10.1 Dell 24" Monitor run through apple display port to DVI Adapter Sony 32" HD TV run through aftermarket display port to HDMI cable I've been running Yosemit

  • How to install extract assets plugins in photoshop cc

    how to install extract assets plugins in photoshop cc

  • Sending e-mail attachments with utl_mail.

    Hello guys i would like to add an attachment to an e-mail using utl_mail I have gotten this part done without a problem. My problem now is that i have to loop a table and make the contents of the table an attachment to the e-mail. So here is what i h

  • Itunes freezes if iphone is connected multiple times?

    One of the many annoyances of my phone. Currently running windows vista with iso4 and the lastest version of itunes. For some reason I've found that when my computer first starts up my iphone connects to itunes fine, will sync, stay connected, everyt

  • BP Classifiction in PC-UI

    Hi together, I have the following problem: If I create a BP as customer prospect in SAP GUI, it's automatically only the classification customer prospect in register classification checked. If I create a BP in PC-UI as customer prospect, there are au