IS it possible to save drill down report in a html file?

Hi all,
My client is looking for a html file of a drill down report. Is it possible to save the report in html format with the drill down feature in it? Please help.
Thanks,
Karthick

HI imansyah,
Can you try doing what you want in first instance and then try posting your problem you face.
Regards
Rana

Similar Messages

Drill down reports using SVG component

I've created and dynamic report and an SVG chart following the examples of the tutorials. I was wondering if, and how, it was possible to create drill-down reports i.e report on colour, then clicking on that colour would reveal the types of car and so on. Does anyone have an example?
Thanks
Darren

Darren,
The query for an SVG chart requires 3 columns: Link, Label, and Value. You use the Link value to provide a link to another page. This link can also pass parameters to the next page.
If you set up a page for each "level" of your drill-down (e.g. color, type of car, etc), you can link from the higher-level page to the lower level page and pass the value that was clicked on in the chart.
Take a look in the HTML DB User's Guide for the section about "Using f?p Syntax to Link Pages": http://download-west.oracle.com/docs/cd/B14117_01/appdev.101/b10992/mvl_fund.htm#BEIJCIAG
You would use that syntax in the Link column of the query for your chart. Here is part of a query I used to drill down from one pie char to another (on page 3), passing the selected project to a variable called P3_PROJECT.
select 'f?p=&APP_ID.:3:&SESSION.::NO::P3_PROJECT:' || Project L,
Project, sum(Time)
from v_timesheet
where ...
Does that help?

Drill down Report in Xcelsius

Hi All,
I am new to BO i dont know much in BO.Is it possible to create Drill down Reports in Xcelsius.
For Example,
Sales Org     Revenue
A                   10000
B                    20000
If we select Sales Organization A or B then the Report would be
Sales Org       Material Group            Revenue
A                              10          5000
A                              20          5000
B                              30          10000
B                              40          10000
If we select Sales Org A or B then the Report would be
Sales Org     Material Group      Material          Revenue
A                              10          MAT01               3000
A                              10          MAT02               2000
A                              20          MAT03               5000
B                              30          MAT04               10000
B                              40          MAT05               10000
Like this i want to display the Report.How it possible in Xcelsius.Please help me it will be more useful.
Thanks,
Shiva
Edited by: siva kumar on Dec 5, 2011 7:50 PM

you can do drill in xcelsisu but for that you need to create 2 webi reports r use 2 different queries .(i dont know which verion of BI you are on)
how mnay organizations do you have if its a small number that you can create a lay out with drop down on left for organization and create 2 tables 1 for organization a data.. if pressed to be visible and 1 for b..
and if 1 and 2 are pressed then show the tired table with both data.
do it in excel using live office webi connection to bring the data in then import the data in excelsisu.. do all your calculations in excel first then bring it to Xcelsius
If we select Sales Organization A or B then the Report would be
Sales Org Material Group Revenue
A 10 5000
A 20 5000
B 30 10000
B 40 10000
If we select Sales Org A or B then the Report would be ( i think you mean and here)
Sales Org Material Group Material Revenue
A 10 MAT01 3000
A 10 MAT02 2000
A 20 MAT03 5000
B 30 MAT04 10000
B 40 MAT05 10000

Drill down report on Oracle R-Enterprise with OBIEE 11g

Greeting Guru
I see the demo that OBIEE can use the png graphic file produced by R.
Is it possible to produce drill down report that way ?
We are doing statistical analysis and we would like to do a drill down with some of our data visualization results.
Is there demo/example code ??
Thanks for the help

http://www.oracle.com/technetwork/database/options/advanced-analytics/r-enterprise/ore-trng5-operatnlzgrscripts-1501640.…
The link above shows a graphic generated by R got embedded in OBIEE11g dashboard
e.g. on presentation p.42 there is a graphic of flight delays by airport. top 36 busiest airport
Is it possible that with a double clicks of JFK, it opens up another reports that is related to JFK let say group it by different airline provider of group by different flight destination for the delay reports.

Hiding fields in ALV DRILLED DOWN REPORT

Hi
My scenario is like this i created a alv drilled down report , in that once the user executes it ,it will displays the header contents of the purchase order.
If the user double clicks on any of the header line item it will displays the item detials of the particular header data..
My probelm is if i double click it i am getting the header details added with the item fields..i want to hide the header detials if i want to c the item level details..
Can any suggest me some better ways to hide the header contents ??
Arun Joseph

hi,
check ur field cat...
R u using same name?
If possible paste ur code here...

Drill down report export to pdf

Hi,
I have a drill down report that i need to export to pdf.to get the drill down facility, I used 'HIDE' option for the groups.
The drill down works in crystal.But when I export the crystal report to PDF, I could not see the hidden groups/Tabs, and my drill down doesn;t work.Please suggest me what to do while exporting a drill down report to PDF. Is it possible to export a drill down report to Excel?Can someone suggest the precaustions to be taken while exporting to different formats??
Thank you,
Tatyana.

Drill-Down behavior in Crystal doesn't carry over to pdf exports.
Using one of the 3rd-party Crystal Reports schedulers listed at http://www.kenhamady.com/bookmarks.html you can achieve similar behavior in pdf exports by automating the process of:
1. exporting the main report to main pdf.
2. Bursting a detailed report to individual pdf files
3. using Crystal formulas embedded in the main report to generate live links from the exported main pdf to the individual detail pdf files.

Adding a characteristics to AR Drill down report for line items

I have raised an OSS note on this, but they deem this to be consulting.
I have an AR drill down report for line items
It calls the structure RFRRD20.
I need to add a value into the characteristics so I can use it in the drill down report.
I have appended the structure, added a value in TKAF for the field, and it still does not show.
Has anybody done something similar?
I am sure this is easy, but only when you know how, so if you know how to do it please can you let me know.
thanks
Mark

Hi Mark
    I am also in the same situation where i need to add two characteristics (invoice date, due date) to the AR drill down reports. I added them to the structure and TKAF table as you did, but still could not get them to the drill down reports (FDI5 or FI1).
   From your posts, i see that SAP's response was that it is not possible to add characteristics to AR drilldown reports? Did they mention any reasons or OSS notes? How did you handle your requirement, were you able to work around?
   Your suggestions would be highly appreciated.
Thanks
Vamsi

FSI0 - Drill Down Reports for Account Balance Analysis

Any orientation on this issue will be greatly appreciated.
These are the steps I did to create a new Drill-Down Report for my customer.
1. Created and modified a new Form based on the Form for the Financial Statement Analysis 0SAPBLNCE-04 (Periodic Actual vs Actual) using Transaction FSI4 (Create) and FSI5 (Change)
2. Created and modified a new Report with reference to the Form I just created using transactions FSI1 (Create) and FSI2 (Change)
3. I select "Expand: Completely" to see all Account Balances
3. All the totals match between the Original Standard Report and the new report I just created.
4. On both reports, when I select a Balance and then select the GOTO \ Line Items to get the list of documents I get the following results:
==> Most of the cases (I would say probably 80% of the cases) the Account Balance I selected matches with the Total of Line Items that is displayed when I do the GOTO \ Line Items
==> In some cases (just a few) the Account Balance does not match at all with the totals of Line Items that is displayed when I do the GOTO \ Line Items
Can somebody explain why ? Shouldn't the totals match all the time since I am specifically selecting a balance to see all its line items? Where are the missing line items?
Since these are just a few cases my customer is okay with it but he would like to hear a logic explanation why the Account Balance and its line items do not match on this report.

Hello,
There is a possibility that you have activate line item display for some of the accounts at a later stage. Meaning that earlier postings were not be shown for the earlier postings but only totals will be made available. Therefore, obviously there is bound to be difference between line item report and totals report.
You need to identify which accounts are being changed with line item display at a later stage.
In case if you forget to keep GL Line item display for an account, but the posting are already made the following steps you would required to get the line item display retrospectively.
1. Note that you are NOT required to make the balance of that GL account to ZERO. Please do not confuse with Open Item Management.
2. Put the check box line item display for the account in FS00. Make sure you are entering right company code.
3. Block the account for posting in COA Segment and Company Code Segment in FS00
4. Go to SA38 and run program RFSEPA01 (Give correct GL Account and Company Code)
5. Now, remove the block you kept on the GL Account in FS00.
This will reset the line item display retrospectively.
Hope this will solve your problem.
Regards,
Ravi

How to get the output data of Standard drill down report into z-program?

HI every one,
        I want to get the output data of drill down report into z-program.
       Actually,if the output is only one, I can get into z-program,
      But, Here the report consists 3 alv outputs. when double clicking function happens, it will direct to another alv output.
    Those, all the outputs of report i want to get into z-program.
PLease , give reply as early as possible.
Thank u in advance,
karthik

HI,
When i download,only one output i will get.
But,if i double-click the particular record it will show another output. I want that output also.
Like that,when i double-click particular record, it will show some other alv ouput based on record,
i wanted all those outputs.
If i copy the code, whether i face any problems?

Query in EIS Drill-Down Reports

Hi all:
We want to build Drill-down reports in EIS. I know the basic of creating a drill-down report. Created a sample using SQL server database and Essbase 9.3.1 dummy(test) cube.
Just to give you a background we have planning application and no Essbase-only applications.
I wanted to know is it possible to use an already existing cube in essbase to create drill down reports. I do not want to go through a process of creating the hierarchy in EIS as we already have DRM and a process around metadata creation, which is not likely to change.
Is there some tool that can take a outline and create a Model/Metaoutline in EIS ?
Please let me know in case you have any suggestions or wild ideas on this :)

The short answer is no, you can't do it that way.
EIS development flows from the relational side to the Essbase side.
The Metadata Outline cannot be built until the OLAP Model has been created. Drill through reports are LROs defined in the Metadata Outline and linked through the OLAP model to the source tables.
I tried to do the same thing four years ago and learned that EIS has to build the Essbase Outline in order to enable drill-through. In Version 11.1.2 that has not changed.
I am curious, though. I was told by my Oracle Planning instructors that EIS doesn't work with Planning. Is that no longer true?
Good Luck.
Tim

Multi-Use Drill Down Reports?

Hi,
I'm just starting out with reporting in SSRS so this may be a silly question but I'm struggling to find a way to do what I want :)
I have a large graphical report with several top 10 reports on different a cube. (eg. top 10 number of events, top ten numbers of computers affected)
I want drill down reports for both the Event Name and Computer Name, also to be able to click on the header of the report and get a complete unrestricted report. I have created a drill down report that has all the data and if I choose one item (say computer
name) I can drop down to the drill down and filter the table in that with the computer name and return any results for that computer. I cant figure out how to have a secondary link that passes a wildcard to returns all results. I'd also like to have the ability
to send an event name to the same drill down and a wildcard for the computer name. However I cant figure out how to get the filter on the table to accept any wildcards.
I dont want to have to create multiple reports for each of the different drilldowns, is this possible? (Easy to understand answers for a newbie if possible :) )

Hi Chris_C2000,
If I understand correctly, you have configure “Go to report” action in your report. It is Drillthrough in SSRS. You want to pass a value link to the corresponding report. We can add parameters in the drillthrough report, then pass parameters values to the
report.
I have create a simple report in my test environment. Suppose we have the same dataset (DataSet1) in main report and subreport with two fields: CalendarYear, SalesAmount. Please refer to it.
Subreport:
Add a table in the report body, fill with CalendarYear, SalesAmount fields.
Add another dataset (DataSet2) with CalenderYear field.
Add a parameter (CalenderYear) get Available Values from DataSet2 CalenderYear field.
Add filter in the DataSet1, with values below:
Expression: [CalenderYear]
Operator: =
Value: [@CalenderYear]
Main report:
Add a chart in the report, fill SalesAmount in the Values dialog box, CalenderYear in the Category Groups dialog box.
Right click the bar in the chart, click Series Properties.
Click Action in the left pane. Select “Go to report” option.
Select the subreport below “Specify a report” prompt.
Click Add icon below, and fill with following values:
Name: CalenderYear Value: [CalenderYear]
Then, when we preview the report, we can click the specific bar link to the subreport get the corresponding data.
Reference:
http://technet.microsoft.com/en-us/library/aa337477(v=sql.105).aspx
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

NEED DRILL DOWN REPORTS IN APPS

Hi
I need to generate drill down reports in oracle apps.
Is drill down reports work in Apps?
If it is possible please reply me, please send any document reference on drill down reports
Thanks & Regards
Adina

Hi,
What do you mean by drill down reports in Oracle Apps. Do you mean using Reports Developer. It cant be done, that is why the need of Discoverer reports. Discoverer reports can be run ( viewer ) from applications but generally associated with a separate responsibility. You can drill down from there..

Drill Down report using Webdynpro

Hi Guys,
Is it possible to develope a drill down report in Webdynpro?
If yes, can somobody direct me to any tutorial for creating Drill Down Webdynpro Report.
I need to convert an ABAP drill down report to Webdynpro Drill Drown.
Thanks,
mini

Hello,
Yes, it's possible, using the linktoaction element please see this: [/people/david.halitsky/blog/2006/09/22/learning-what-you-dont-need-is-as-important-as-learning-what-you-do-parts-10b-c-of-event-driven-tutorial-on-wdrtestuielements] and [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/db22242d-0701-0010-28a2-aeaa1fefd706].
Regards.

Drill down reporting - add new field

Hi experts,
                   we have created drill down reporting for vendor line item using FKI4. we need to add new characteristic (new field - assignment column- zuonr) for form and reports.
guide me.
Regards,
Ravi

Hi
For columns select 'key figure with characteristics' . There   give Key figure - balance c/f' and select the characteristic from the   left side list.
Then for rows select ' characteristic'    and   again select from left hand side list.
You define the total where required.   Save this form .
You can also   create report in GRR1 using the form created.
I   am sending   you a document in you contact details.
Thanks
kamala

Drill Down Report (Denes Kubicek)

Hi Denes and everyone
I would like to create a drill down report.
I have 5 tables namely:
1. Method (method varchar2(60) PK)
2. Category (cat varchar2(60) PK, method varchar2(60) FK)
3. Skill_type (type varchar2(60) PK, cat varchar2(60) FK, method varchar2(60) FK)
4. Skills (type varchar2(60) FK, empno NUMBER FK, status char(1))
5. Emp (fname varchar2(60), lname varchar2(60), empno NUMBER PK)
and a view between Skills and Skill_type: (type varchar2(60) FK, empno NUMBER FK, status char(1))
The user should select a method he/she obtained the skills (e.g. Internally or externally) then after selecting it drills down to skill category (e.g. systems, softskills, technical or HR) then the user should click a category and drills down to skill type (e.g. microsoft word, conflict management or A+) here the user should click a checkbox or Y to indicate which skills he/she have and then click a submit/save button which updates/insert the view/skills table(4).
Example
Surname     Name     softskills                                                   Microsoft
          Leadership Change_Management Motivation Conflict_Management    MS_Projects MS_Word MS_PowerPoint MS_Excel
james     pete          Y               Y                                  Y          Is there anyway I can use a drill down report, tabular form or anyother options.
Your guidance will be appreciated.
Kind regards
Mel

I got a solution for drill down, all i need is updating the skills table
here the user should click a checkbox or Y to indicate which skills he/she have and then click a submit/save button which updates/insert the view/skills table(4).
Example
Surname     Name     softskills                                                   Microsoft
          Leadership Change_Management Motivation Conflict_Management    MS_Projects MS_Word MS_PowerPoint MS_Excel
james     pete          Y               Y                                  Y     Thanks

IS it possible to save drill down report in a html file?

Similar Messages

Maybe you are looking for