Is it possible to save files from labview 9.0 so that they will open in labview 8.6?

We are colaberating with another institution that uses programs written in Labview 9.0. Is there anyway to save these files or down convert these files so that we can use them in labview 8.6?

duplicate post

Similar Messages

I need to change a file from .PDF to .pdf so that it will upload to a site. Can you tell me how?

I am trying to send a file but have been told by the sendee that the file suffix has to be .pdf and not .PDF. I have tried to rename the file, but nothing I try works.

It 's like an application form where I need to attach a document. So it just says there is something wrong with the file I am trying to upload. So I contacted the people who run that site and they emailed back and said it was possibly because a file might be named DOC instead of doc, or PDF instead of pdf.

HT201250 Is there a possibility to recover erased files from an external hard drive that was reformatted by the Time Machine?

Is there a possibility to recover erased files from an external hard drive that was reformatted by the Time Machine?

Basics of File Recovery
Files in Trash
If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location. OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone. Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

Is it possible to delete files from time machine?

Is it possible to delete files from time machine? I had a drive crash, restored the files to a new drive, and now the old versions and the new versions of the files are both backed up, taking up a mountain of drive space. Do I just have to wait 'til the drive gets full and then tell it what to delete first?

Hi, I need help in a related problem. I have 500gb time capsule. I needed larger hard drive, so I now use TM to back up to a different 1tb hard drive. So I don't need the TC as a TM back up device. But I want to use the TC's hard drive as an extra external hard drive. I deleted the files that were on it. but it still shows it has a sparsebundle file with a size of over 400gb ( probably the size of the old backups). When I use disk utility to try to erase it, I am not offered the erase tab. This "disk" does show on the desk top as a mounted disk (I think) with only 53 gb free. How can I set this up so all the disk space is free and I can use it for storing files, not as a back up? Thanks

Can I use my time capsule to back up or save files from my pc?

My time capsule works great with my 2 Macs. I just got a PC and would like to know if I can use the time capsule to back up or save files from my PC?

You can.. but obviously PC is missing TM.. so you will need to use a backup software.
Saving files to the TC is not really recommended.. but as long as you have lots of space is unlikely to cause problems.. the whole idea of TM though is to keep incremental backups on an hourly basis and will slowly fill the TC.. once space is short.. it can get messy.
Also read Pondini who is positively against using it for other files.
http://pondini.org/TM/TCQ3.html
I suggest you read .. skim at least the FAQ so you actually understand what TM - TC is all about.
A USB drive plugged into the PC makes a better backup
1. It is formatted NTFS, ie native format and readable by any windows computer. A TC is a network device.
2. USB drives are cheap. You can use 2 of them and store one offsite.
3. USB traffic is not on the network.
4. Storing files on the TC is bad as it is a backup target not itself backed up.
5. In a pc you can add drive after drive after drive.. (assuming a desktop since you didn't say laptop). Only a Mac Pro can do that in the Mac world.. internal drives are cheaper than a. USB drives, b. network drives. And they are 10x or more faster.

Is it possible to move files from corrupted sectors hard drive to a replacement one?

My 2011 macbook pro was recently diagnosed with bad sectors. I am looking to get a replacement hard drive, probably a 750 or 1 tb Seagate SATA. Do you think that is sufficient? I do not play games or do anything memory intensive. The most I do is watch a lot of movies.
Also, is it possible to move files from a corrupted sectors hard drive to the replacement? If so, how would I go about doing this?
Also, for the operating system, it is probably wrong, and can't check since my Mac pro won't get past half way on the start up loading screen.

Try a sector copy with CCC and enable using checksum file copy to insure integrity.
Then Data Rescue 4 - try demo before buying
Do a full erase of a drive before reusing.
Invest in SoftRAID.com going forward as it "looks for" weak sectors, alerts.
Also Google around but SMART Utility has been mentioned as an excellent program/utility -
When a drive has used any of its spare blocks from when it ships is #1 indicator of being time to replace.
And of course always have multiple backup sets, methods and know how to use and restore from. Even do a practice set. I would not use just TimeMachine for instance.
And for some, only a mirror array (minimum two but really consider three drive mirror, with stripe reads to improve performance) can allow pulling one, add a new member and still have a two drive mirror.
Cloud storage for backup. With OneDrive and Facebook backing up all the photos on all your devices, Macs and PCs as well as tablets and phones, you can have 100-200GB quite easily. And there is Google Drive and Amazon as well as others.
A new data drive, a drive to do all the recovery of files that were on the failed drive(s), and probably a clean system drive and use that as you recover and build your system back up.

SharePoint Library - If I save file from Excel File Save As - then I always get "File already exists. Do you want to replace it?" - Upload works fine though.

Hi there,
In my SP 2010 document library - When I try to save an Excel file from File > Save As menu to the document library it always prompts me "File already exists. Do you want to replace it?" even though the file does not exist in that document library.
To the same document library - if I upload a file then it accepts it all fine.
Any clues why I cannot save files using File > Save As menu?
Thanks.

Hi,
As I understand, the notification pops up when you save an excel file to SharePoint library, while when directly upload file to library, there is no wrong.
Please confirm if the issue occurs to other machines.
Please open Microsoft Office Upload Center on the issue machine, then click settings, clear cache via checking Delete files from the Office Document Cache when they are closed.
http://office.microsoft.com/en-in/excel-help/office-document-cache-settings-HA010388664.aspx
If the issue occurs to client, I’d recommend you also ask the question in Excel forum:
http://social.technet.microsoft.com/Forums/office/en-US/home?forum=excel
Regards,
Rebecca Tu
TechNet Community Support

How do i save file from laptop to my iphone

how do i save file from laptop to my iphone

There are apps that do this. I've used an iPhone App Excelcontacts for a couple of years to do just this. Should work fine on iPad. There are other apps that do this, too.

How do i save files from mac pro to an external hard drive

how do i save files from mac pro to an external hard drive

Your external drive is formatted NTFS which OS X can read from but not write to. You can either install third-party software on the Mac to enable writing to the drive or repartition and reformat the drive for exclusive use with the Mac. If you don't need to move files between a Mac and a PC, then I would recommend the latter solution.
Tuxera NTFS 2012.3.2
NTFS for Mac OS X 9.5.3
To repartition:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select the external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Is it possible to save files on to a cd? Do you need special software to do it?

is it possible to save files on to a cd? Do you need special software to do it?
Thanks ahead of time.

Also... you can use another software like LiquidCD or Burn (both without cost)
Liquid CD: http://www.macupdate.com/app/mac/19994/liquidcd
Burn: http://www.macupdate.com/app/mac/21992/burn

Script command to Save File From Portfolio

This is the script command to save as, app.execMenuItem("SaveAs")
What's the script command to Save File From Portfolio?
Do you know?

Hi,
We were looking for that before: Exporting XFA PDF from within Portfolio
Paul exposed the menu items and while I was hopefully that app.execMenuItem("ExtractFilesFromPackage"); would work - but it didn't.
It transpires that only a few of the app.execMenuItem commands are unrestricted and available.
So we continue to use the "open"button on the top right of the portfolio to open the file out of the portfolio:
I think you are stuck with that,
Niall

I was wondering is it possible to transfer files from a iPod to a computer?

Hi I was wondering is it possible to transfer files from a iPod to another computer?
Thanks for your help ,
lizabler
Windows XP

There is a free program that will do what you described.
Its called YamiPod. Its available for Windows, Mac, and Linux.
http://www.yamipod.com

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
What we found from out testing:
- The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
- The file can be closed and Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
- Also, until the Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file.
Example Scenario:
- User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
- Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
- User 1 saves his file and closes it - but Dreamweaver is still open.
- User 2 also saves his file and leaves Dreamweaver open.
- The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
- If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
- Same for User 2, he will open 'his' version with 2300 lines in.
Other information:
- Files are opened directly from the server
- Sometimes the users will save incrementally and re-open
- Most of the time users will save incrementally and keep the files open
- The users will never not save incrementally and just save when closing the file once finished
- The users are usually working on the files all day
- It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
Anyone know if this is a known issue?
Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
Thanks

Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
Mylenium

IF I RUN A EDITING WITH PREMIERE ELEMENTS TEST VERSION, WILL BE POSSIBLE TO SAVE THE WORK WITHOUT THE MARK AFTER THAT I BUY THE LICENCE? THANKS

IF I RUN A EDITING WITH PREMIERE ELEMENTS TEST VERSION, WILL BE POSSIBLE TO SAVE THE WORK WITHOUT THE MARK AFTER THAT I BUY THE LICENCE? THANKS

NUNU
Media cache files are not involved in the removal of the Adobe watermark from the project.prel file from a tryout.
Just a re-enforcement mention...you cannot remove the Adobe watermark from a tryout "saved" exported product; whereas, you can from a saved/closed project file (project.prel).
By exported product, I mean a burn to disc in the tryout or the Timeline of the tryout exported to a file saved to the computer hard drive.
In the case of removing the Adobe watermark from the tryout project.prel, classically you delete the rendered files (Timeline Menu/Delete Rendered Files) in the purchased program. In no way is media cache involved in this. Some of us have found that there was an automatic removal of the Adobe watermark resulting from just opening the tryout project.prel file in the purchased program.
Please review and consider.
Thank you.
ATR

I was able to copy all my files from my Time Capsule, but that is all they are...files. How do I get my new Mac Mini to emulate my other Mac?

I was able to copy all my files from my Time Capsule, but that is all they are...files. How do I get my new Mac Mini to emulate my other Mac?

Doggiemommie,
Copying files is not a good idea.
The "other Mac" was backed up onto Time Capsule using the Time Machine. On your new Mac you should restore the old user - rather than copy files manually.
This usually happens during the initial setup of the new computer or you can do it later using Migration Assistant.
Please note, it is possible to damage backup file on the Time Capsule when you browse it and copy files manually.
Hope this explains.
TZ

Is it possible to save files from labview 9.0 so that they will open in labview 8.6?

Similar Messages

Maybe you are looking for