Is it possible to schedule Load from HANA Studio?

We've been replicating over 100 tables from ECC to HANA. for about a month. According to the "Last Replication" statistic, we have at least 20 tables which have never replicated ("No record replicated yet"). We're going to stop replication on the 20 tables and would like to schedule them to load periodically from HANA Studio. Is that possible?

Krishna,
We actually want to schedule the equivalent of a HANA Studio Data Provisioning Load on the SAP LT Replication server. We've tried using SLT transaction IUUC_DATA_TRANSFER with Test Mode = '-' (false); it runs successfully but is not loading any records to HANA. Is there another way to accomplish this?
Thanks for any assistance you can provide!
-Keith LaVey

Similar Messages

Not able to start HLM from HANA studio

Hi Experts
I have installed SAP HANA SP07 version with patch level 4 on one of the node of a 4 node server.
4 nodes   A B C D
on node A i have installed AP HANA SP07 version with patch level 4    and everyting is working fine form HANA Studio 8.2
on node B i have installed AP HANA SP07 version with patch level 4    HLM is not working with HANA Studio 8.2 and at oslevel to.
i did update to latest HLM version ie., sp7 patch12.
but still the same error.
welcome any suggestions.
Thanks
Kishore

Hi Sadanand
Thanks for your update.
I did start the HLM as following
#cd /hana/shared/<SID>/HLM
# ./bootstrap-hlm.sh
i got the following prompt
<hostname>:/hana/shared/<SID>/HLM> ./bootstrap-hlm.sh
There is bootstrapped HLM
Checking for running HLM...
There is no running HLM.
Configure /usr/sap/hlm_bootstraps/<SID>/HLM/hlm.sh
osgi>
and now i can seel HLM process running at os level.
but still not able to launch HLM from HANA studio and the following URL is not working
1) via browser: http://<host>:1129/lmsl/HLM/<SID>/ui/?sid=<SID>
This webpage is not available
Thanks
Kishore

Getting error while scheduling load from one cube to another

Hi,
I have create one cube ,which has got loaded from two data sources and load into the cube went successful.I have created copy cube and schedule the load into copy cube from the base cube,where i am getting error message syaing that"New work Area started,terminated the system" and "Core_dump","Rolled-Out session terminated" all the above messages are getting and so many short dumps.I am getting all the above messages.
Even i have change data packet size from 20000 to 5000 and increares dialup process from 2 to 5.But still i am getting same kind of messages.
Please some one can help me out from this issue.

Hi,
In which version you are.
If you in 7.0 then have you checked in DTP.
Just logooff from your server, and again relog, and try to load once again.
Let us know status ....
Reg
Pra

Unable to connect to HANA One instance from HANA Studio

I am trying to add my HANA One instance to my HANA Studio and keep getting an error "The system is not reachable, the login data could not be considered". Any pointers on how to troubleshoot this would be much appreciated.

Hello G,
We understand you situation very well. We are expecting a follow-up on the status based on our suggestion made within less than 1 hour after posting the issue even during weekend.
As far as your SAP HANA One Developer Edition, the suggestions made here for productive uses may not be relevant. Please follow-up appropriately posting and following SCN from where you initiated HANA One Dev Edition as SCN is heavily used for Dev Edition..
In either case, you should not keep any instance running till you can use it. We strongly recommend to stop the instance while you are not using it or between troubleshooting.
@Gaurav,
We will appreciate an update here. We like to see you are start using SAP HANA One for productive uses immediately.
Thanks and regards,
Swapan

How to consume oData from HANA?

Hi All:
I am starting using HANA (the trial public version), and I want to expose an oData service that allows me to feed an aplication. How it is possible to do this? Is possible to do it from HANA Studio?
Thanks!

Hello,
I am not sure if I understand - at the moment SAP HANA is not supporting oData - you can choose from following interfaces:
u2022 SQLDBC (only on windows) - SAP native database SDK
u2022 ODBO (OLE DB for OLAP)
u2022 ODBC
u2022 JDBC
Or you might use other SAP technology to provide this... maybe SAP NetWeaver Gateway
http://help.sap.com/saphelp_gateway20/helpdata/en/2f/d48687c1e14e87915d41e595a4285d/frameset.htm
I will also quote what Juergen said about oData (Dec 5, 2011)
Re: HANA with Mobility?
Later versions of HANA may include an ODATA interface, so you can talk to your tables and models in the same way you talk to NW Gateway. It won't require a Gateway system, it will just look like one from a protocol point of view. No definite roadmap published as far as I know, so take this information with the appropriate amount of salt..
Tomas

Cannot start replication from HANA SUDIO...SLT ISSUE

Hi,
When trying to replicate/load tables from HANA studio nothing is happening.
I do not get any error messages but the table does not appear in the Data provisioning screen.
I checked RS_ORDER and it has no entries.
Somehow the SLT master job is not responding to the orders issues by HANA studio.
I am not able to understand what is happening here?
Can anyone help?
Regards,
Sidharth Mishra

In Development environment, you can insert a row manually to RS_ORDER and see whether table load/replication happens?
Just right click the the table RS_ORDER in your replication schema and choose "Generate - Insert Statement" and give relevant values. If you are not aware of what to fill in, you can refer to my blog "Only Delta Loading using SLT - Know How" for the same.
But do not do this in production environment.
Regards
Raj

Performance -- load tab in hana studio

Hi Folks,
I have a strange requirement here from hana studio.
I want to extract daily performance data from hana studio for the previous whole day/night and send across the graph as an email next day.
Now the problem is that i am doing it manually daily.
Is there a way to automate the same ?
nameserver_history.trc its very hard to intrepret the data from there. Is this possible ?

Martin,
Thanks a ton for the information,
What can we do with the current version, we cannot upgrade to SPS 9 at this moment. Any alternate work around?
HDB version info:
version:             1.00.82.00.394270
branch:              NewDB100_REL
git hash:            not set
git merge time:      not set
weekstone:           0000.00.0
compile date:        2014-08-17 18:34:26
compile host:        ld7272.wdf.sap.corp
compile type:        opt

How to send emails from HANA SQL Console

Hi,
Please guide how to send mail from HANA Studio SQL Console.
Is there any standard procedure in Hana Studio to send Mail( e.g. in MS SQL "sp_send_dbmail" Procedure)

Hi Preethi,
Please go through the attached link:
How to send emails from HANA
Regards,
Krishna

Install of SAP HANA Studio Dev Ed v1.00.80 fails with "Could not create the Java Virtual Machine"

Hello,
Scope: JVM error during initial install of SAP HANA Studio Developer Edition v1.00.80, Win86/32bit
Source: installation files pulled from HANA Studio tab at https://hanadeveditionsapicl.hana.ondemand.com/hanadevedition/, which is a link from the main HANA site of http://scn.sap.com/community/developer-center/hana. zip folder: "sap_hana_win32_studio_rev80"
Targeted O/S: Windows 7, 32-bit, local Java is SE 7, update 67.   Java environment has been confirmed via checks provided at http://www.java.com/en/download/manual.jsp
Actions taken:
Attempted to update the installation's eclipse.ini file by reducing the -Xmx value; see details below.
Read thru postings such as http://scn.sap.com/thread/3390626 and the threads it recommended.
Checked OSS (ie Note 1859686 - HANA Studio does not start)
Description of installation error:
Shortly after executing "hdbinst", it fails with the error "Could not create the Java Virtual Machine". I've verified that there is nearly 3G of memory free. What I did notice, as shown in the attached files, is that Eclipse is part of this installation and it's pre-loaded with the "eclipse.ini". I firmly believe the solution could be to reduce parameter "-Xmx1024m" to "-Xmx512m" but it's a catch-22 because even after updating eclipse.ini (in installation folder C:\Program Files\SAP\hdbstudio\tmp_p2director2014.08.13_13.36.44\director), the install program requires that the "hdbstudio" folder to be empty upon restarting it.
Since the installation is basically a package with a lot of .jar files, there is no eclipse.ini file available in the source install folder; otherwise, updating it there would be the easiest solution if that option were available. The file is only available in the targeted deployment folder above.
If you have encountered this same error and were able to resolve it, I would be grateful to know of your solution. Thanks very much.
FYI: the HANA Client installed with no issues.
Jim Cleek
FYI: the images below reflect the sequence of images produced during the installation.
after clicking OK above, the screen below gets updated (see the "is not empty" msg).
Below is the eclipse.ini file located in the deployed/target folder:
Message was edited by: Jim Cleek
FYI: Using information from the SAP HANA Database - Studio Installation and Update Guide, I tried to override the installation's use of its eclipse.ini file by passing my own modified version (with "-Xmx512m") of that file that was placed in a separate folder. The cmd used via DOS window was "hdbsetup.exe -a studio --configfile=C:\Users\Admin\Downloads\eclipse.ini" and even though it successfully launched the SAP HANA Lifecycle Management gui, it failed on the first step with the same JVM create error as above because it appears to have used its own eclipse.ini file, which has "-Xmx1024m".

Update: a message was opened with SAP but unfortunately they could not provide a resolution for this particular scenario. They admitted that the eclipse.ini file cannot be updated since it is bundled as part of the installation package. One point to make that I did not make before was that this was being attempted on an Oracle VirtualBox (4.3.10); the SAP HANA contact said he assumed that SAP has not tested this particular scenario, thus it could not be supported.
Resolution: the end result was to abort trying to install SAP HANA Client and Studio on the Oracle VirtualBox but to install it locally on my own desktop, which runs on Windows 7 Enterprise 64-bit with 8G of memory. The SAP HANA files below were downloaded, extracted and installed successfully in the order shown.
FYI: the Studio installation detected that a 64-bit version of Java was not installed so I installed that and then adjusted the User environmental variable JAVA_HOME to point to that new path, leaving the System variable still pointing to the pre-existing 32-bit Java path.
SAPCAR 7.20 -> Windows on x64 64bit: SAPCAR_315-20010453.EXE
IMDB_CLIENT100_80_0-10009664.SAR   Revision 80 for SAP HANA CLIENT 1.00
Support Package SAP HANA CLIENT 1.00 Windows on x64 64bit
IMC_STUDIO100_80_0-20007647.SAR   Revision 80 for SAP HANA STUDIO 1.00
Support Package SAP HANA STUDIO 1.00 Windows on x64 64bit
jre-7u67-windows-x64.exe - http://www.oracle.com/technetwork/java/javase/downloads/jre7-downloads-1880261.html
Jim Cleek
HP Enterprise Services

SAP table replicated in HANA Studio not displayed.

Hi Experts,
I have started replication of the ECC table MHND (which have only 350K records) several hours ago through Data Provisioning SLT in HANA studio, but the table replication status was never displayed.
I have refreshed the target schema several times but could not find the table.
Also, the table is is shown as active in DD02L, DD02T.
I do not have access to Replication Server. So, is it possible to see the replication status from HANA Studio?
Thanks,
Krishnendu Roy.

Hi,
if any records are available in RD_ORDER for a longer time, it seems like that there is a connection problem between SLT and HANA.
You find here the action codes: http://scn.sap.com/community/replication-server/blog/2013/06/24/how-to-start-data-provisioning-without-using-the-data-provisioning-ui
M & T inidicate that someone manually or via LTRC started the process.
Best,
Tobias

I Need to add Could hana system in hana studio.

Hi Experts.
I have installed hana studio in my system. and have created a hana could platform accout , but i can't get user details and host, instance no from could.
How i will get this all details from could and how i will access from hana studio.please help i don't have option to created hana instance in could. please find below screen.
Thanks
Jana

Hi Jana,
You can refer "Using a Trial SAP HANA Instance" Here is the link SAP HANA Cloud Platform
If you use SAP HANA Studio to connect your SAP HANA instance on HCP, you have to use SAP HANA Cloud Platform SDK to open a DB tunnel first. You can download the SDK from SAP Development Tools for Eclipse
Best regards,
Wenjun

Error in HANA Studio

Hello Everyone,
I am unable to connect to any HANA systems from HANA studio and am getting the following error :
Database driver not found (com.sap.db.jdbc.Driver)
Kindly advise
Regards,
Vinay

Hi Vinay,
Can you un-install the existing version and install the new version of HANA Studio
Refer installation guide in the link below for reference
http://www.saphana.com/docs/DOC-1808
Hope this helps.
Regards,
Deepak Kori

Is it possible to export schema from one HANA server to other

Hi,
Is it possible to export schema from one HANA DB server and import it on another HANA Server?
Thanks & Regards,
Kumar

Hi Gaurav,
Yes you can Export Schema and Import Eported Schema in New Schema if you have HANA Rev 69.
Please check below links.
Backup particular database on B1H HANA
SAP HANA restore and backup single schema
SAP Business One 9.0, version for SAP HANA PL04 available
SAP Business One 9.0, version for SAP HANA PL03 available now
Hope this helps
Regards::::
Atul Chakraborty

How to have a web-based interface for Lumira that also performs Ad-Hoc visualizations on data that should be loaded live from HANA.

How to have a web-based interface for Lumira that also performs Ad-Hoc visualizations on data that should be loaded live from HANA. I have another tool that puts data into HANA, So don't want to reload this new data into Lumira every time I want to run a report.
so do i have the ability to create polished ad hoc dashboards, reports, infographics and storyboards Apart from Ad-Hoc reports, I also need a dashboard with some fixed reports that update with the live data.
So please suggest me to accomplish this task.
Thanks and regards
Shashi kiran

Please have a look at Ludek's document here which contains links: SAP Lumira Family Supported Versions Matrix
Ludek has also attached the PAM's as zipped files; Lumira comes in many flavors so I encourage you to research options
Also see this "HANA Live" document: [SAP HANA Academy] Visualized: Lumira & HANA

Anyone tried this - Extract data from HANA Live reuse views into BW?

Hello Experts,
I've read from this blog http://scn.sap.com/community/bw-hana/blog/2014/05/26/go-hybrid--sap-hana-live-sap-bw-data-integration that this scenario
> "Loading of data into BW using Reuse Layer of SAP HANA Live as data source (Extract data from HANA Live reuse views into BW)" is possible.
Does anyone has a step by step guide on how to do this? Can you please share?
Regards,
DaSaint

Hi DaSaint,
best to check the online documentation
Notes about transferring data from SAP HANA using ODP - Modeling - SAP Library
Best regards,
Andreas

Is it possible to schedule Load from HANA Studio?

Similar Messages

Maybe you are looking for