Is it possible to scroll the current highlighted bookmark into view?

I have a PDF with a lot of bookmarks and the current one, that points to the first page of the document, is highlighted. Sometimes that bookmark will be a long way down the bookmarks list and so initially out of view. The bookmarks have been created by a plug-in and I would like to know if there is a way to programmatically force a specific bookmark into view by making the bookmarks pane scroll to the correct place through the Acrobat (plug-in) API, or JavaScript, or perhaps an Acrobat setting to do this? I cannot find any way that does this yet.
Thanks
David

It's not difficult to rebuild or amend the bookmark tree to better reflect the actual document, but there is no control of the navigation panel window through the API. You are able to open and close subsets of the tree if that would help.

Similar Messages

Not possible to scroll the menu without lagging - Set Up a Repair service is not working

Hi,
It is not possible to scroll the menu without lagging.
The latest version has been restored but nothing.
I think the touch screen is having some problems.
I wanted to use the Set Up a Repair / Send In for service but it seems that the application form doesn't working.
As soon as push the Continue button, nothing happens.
Is there anybody from Apple who can check this issue please?
Thank You.
Anmary

Restoring a phone from a backup will put the device back to the state it was when the backup took place, i.e. all info that you had on that phone before using the backup will be gone.
You could try to restore the phone, which will back up the actual data on the phone, including the passcode, and use this backup to set up a new phone with. The passcode will still be the same, because it is part of the backup.
More info here, iPhone and iPod touch: Wrong passcode results in red disabled screen
Not being able to fill in the passcode is not much different from forgetting it.
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Also have a look at this one: iTunes: About iOS backups

Is it possible to scroll the lyrics of the same music? some lyrics are large, and is hard to see. It is possible to scroll the lyrics???? please help me!!!!!!

Is it possible to scroll the lyrics of the same music? some lyrics are large, and is hard to see. It is possible to scroll the lyrics???? please help me!!!!!!

Hi
No
It is not possible to scroll any Lyrics in Mainstage.
You could possibly use one 'page' of lyrics per patch, and change Patches for the next lot of lyrics?
CCT

Is it possible to scroll the text in Adobe Digital Editions?

Is it possible to scroll the text in Adobe Digital Editions?

Hi,
It is impossible to do that because the user query is using query generator. Click the condition button in the quer generator windows. The selection criteria text used the condition.
you can use a custom report instead of using user query e.g. crystal report or reporting services
JiM

Is it possible to print the current screen in Module pool program(Dynpro)?

Is it possible to print the current screen in Module pool program(Dynpro)?
I create a Module pool program , and customer hope can print the screen when they click print button, Is it possible?

Does the customer want a screen shot or what? Please elaborate on your requirement.
Maybe you should create a smartform first, which is called when one clicks on print button. But in fact, we need a bit more info than this.

How can I make it put the folder in the current highlighted folder?

When I am in a sub folder and want to create a new folder I got to File > New Folder and it always create the folder at the route in list view.
How can I make it put the folder in the current highlighted folder?
Kevin

Open the subfolder in it's own window. The window has focus, that's why the new folder is created at its root level.

Is there a keystroke to play the currently highlighted song?

i use the arrow keys to select an album (left or right arrow)
and to select a song on an album (up or down arrow)
but when i press the space bar to play the song i have highlighted
iTunes plays the first song on the album. very annoying!
is there a keystroke combination that will play the song you have currently highlighted in your tracklist?

that works in every view except Cover Flow, which is the view i'm using. Sometimes it works and mostly it doesn't.
i think it has something to do with the area of the itunes window that i am focused on. i click on the Cover Flow area so that i can use the left and right arrows to jump from album to album, thene the up or down arrows to select the song i want.
the return button will play the highlighted song maybe once. i can't get this to always work.
the enter button either makes the song title editable or returns the error tone.
i'm using the full mac keyboard with number pad. and in keyboard preferences i have "Use all F1, F2, etc. keys as standard function keys" checked.

Is it possible to get the current output level??

Is it possible to get the audio output level of a stream (in this case a mic input going through GSM compression to an RTP socket).
I would like a couple of volume bars in my application so people can see how loudly they are talking.
If anyone has any ideas on how to achieve this it would be much appreciated!
Thanks,
Dex

You want a volumeter, i am also interesting in it

Is it possible to refresh the table from a Materialized view

Hi,
Is it possible to update the underlying table on which a Materialized view is created when some changes in a Materialized view is done.Is this reverse compatibility possible in Materialized View?
Thanks in Advance,
V.Dennis

If you created the materialized view as UPDATEABLE then changes to it should automatically be relected in the underlying table. If this is not occurring I suggest you check the replication jobs. You probably have a stack of errors in DEFERROR.
Cheers, APC

Possible to change the datasource from a business-view to a Sql Command ?

Hello,
When a business view contains a lot of elements it takes a while just to open the report.
We'd like to keep the BV as the dictionnary, but,
once the report design completed,
we'd like to disconnect the business view and replace it by the Sql command which can be seen in the menu option 'show SQL query'.
Is it possible via the RAS sdk ?
Did somebody experience this ?
How to proceed ?
Thanks a lot
Alain

Hi Ted,
I'm thinking opening a Case for this problem of opening reports based on a big BV.
We can't really reduce the BV, since it is the dictionnary and we need the whole thing...
I'm wondering why it is impossible to change the Datasource if the tables and fields underneath are identical.
Is it impossible to change the fields' mapping ?
The other solution, as you suggest, is to create a report from scratch, create a new Datasource with the Sql command format, and rebuild the report... I agree it looks like a big job...
Do you know if it is possible to export the report in XML for instance, change the XML, and then re-import ?
Thanks for your Help.
Alain

Is it possible to change the background of Web Dynpro Views in MDE apps ?

Hi Team,
Is it possible to change the Background color of Web Dynpro Views in Mobile Device applications ?
I have been able to change the cellBackgroundDesign from Transparent o fill1 etc and this change is visible in the desktop application.
But whenever; I am running this application in Mobile Device, the color change is not visible.
Also, there is an earlier post given by me for changing the color of rows in Table UI in SAP SRS Mobile Device Enabled.
Color code logic not feasible in Pocket Browser
Our Mobile Devices are:
http://emobilescan.co.uk/downloads/manuals/ppt8800.pdf
The OS is: Windows 2003
and the Browser is: Pocket Browser.
Please give me in any suggestion which I can implement to see the background color change w.r.t, Mobile Devices.
Thanks & Regards
Kaushik Banerjee
SAP Portal

Hi,
Have you uploaded your Photobook to Kodak Gallery or Shutterfly?

Is it possible to group the dimensions and measures into respective folders in SAP BO Analysis office - excel?

Hi Guys,
We can group the similar dimensions or measures into folders in Universe which can be further consumed in other BO reporting tools.
Is it possible to do the same while connecting AO with HANA?
I want to group similar dimensions and measures so that it comes as respective folders in AO and makes the experience for the user better. Is it possible?
Regards,
Krishna Tangudu

Hi Michael,
Thanks for your reply. If this feature is not present or not in the roadmap too then i might have to follow the same solution as well.
Hoping Tammy Powlas has some answer for this.
Regards,
Krishna Tangudu

A severe error occurred on the current command - select into

Hi
I am making a backup of a table before working on the original, but when I try a simple select into statement I receive 'Msg 0, Level 11, State 0, Line 0 - A Severe error occurred on the current command. The results, if any, should be discarded.'
I am able to run a select query on the original table with the same where clause I am using in the select into statement and it runs without error.
Does anyone know why this is happening?
Server 2008 64bit, SQL Server 2008r2
Thank you for any help

This is a generic message that informs you that something went very wrong, either in SQL Server itself or in the client API.
If open a command promptt and try the same command running from SQLCMD or OSQL, what happens? If things seems to work well, run a simple second command like "SELECT 1" to make sure that this works. (The use a different API from SSMS, why it is
worth testing.)
Also look in the SQL Server error log. If you see a stack dump which appeared at the same time as you ran the SELECT INTO statement, then it's clear that the accident was in SQL Server.
I would recommend that you run DBCC CHECKDB on the database, as the root cause could be corruption.
Erland Sommarskog, SQL Server MVP, [email protected]

Is possible to connect the 2 SELECTS statements into 1 for my stored procdr

ELSE IF(@number = 2)
BEGIN
SELECT COUNT([outlet #])
FROM OM
WHERE [address] LIKE '%' + @address + '%';
SELECT [outlet #], [name], address, [city/town], [postal code], telephone
FROM OM
WHERE address LIKE '%' + @address + '%'
END
Would it be possible to obtain the # of records and records in one shot
Thank u for your time

I suppose it depends on what you are really talking about, and what database and driver you are using.
A statement can return more than one result set - see Statement.getMoreResults().

Is it possible to have the same Split Code/Design view in CS5 that I had in CS3?

I am not a hard coder. However, like HTML, I could easily edit PHP in CS3 Dreamweaver's Split Code/Design view. It was more designer friendly, intuitive, etc. I could see/edit/move tables, placed graphics, text, etc. CS5 doen't allow me to see my PHP pages this way. Can this be fixed to have the same Split Code/Design view? I would appreciate any assistance you can offer.

To restore the cs3 style horizontal split of code and design views, go to the 'view' drop down menu and untick 'split vertically'.
Richard

Is it possible to scroll the current highlighted bookmark into view?

Similar Messages

Maybe you are looking for