Is it possible to search for a specific term or data in Numbers for iOS?

I looked for similar questions, but all of the similar questions did not specify if they were talking about the Mac version or the iOS.  So I apologize if the question has been asked.
Is there a way to search for a specific term or criteria in Numbers for iOS?
My father owns a small business and has a large inventory of parts.  He wants a simple way to search his inventory for a particular part number and see how many of a the specific part number he has in his inventory, while not in the shop or having to call in.  He wants to take an iPad along with him.
My first thought was to create an spreadsheet.  I have a basic knowledge of how spreadsheets work, and I don't think my father would like anything more complicated.
I was thinking about making the 1st column list the part number, 2nd column list the quantity in the shop, 3rd column list the quantity in the truck.
If Numbers for iOS is not able to do this, suggestions for alternatives are welcome.
Thanks in advance

Hi j4nitor
Would the "Find" option in the "Tools" menu do the job?
If you search for the part number, it will be highlightet, and with your outline for a setup, I guess that would give you the overview you are talking about.
Hope it helps.
Best regards
Ole

Similar Messages

  • Best practices for loading apo planning book data to cube for reporting

    Hi,
    I would like to know whether there are any Best practices for loading apo planning book data to cube for reporting.
    I have seen 2 types of Design:
    1) The Planning Book Extractor data is Loaded first to the APO BW system within a Cube, and then get transferred to the Actual BW system. Reports are run from the Actual BW system cube.
    2) The Planning Book Extractor data is loaded directly to a cube within the Actual BW system.
    We do these data loads during evening hours once in a day.
    Rgds
    Gk

    Hi GK,
    What I have normally seen is:
    1) Data would be extracted from APO Planning Area to APO Cube (FOR BACKUP purpose). Weekly or monthly, depending on how much data change you expect, or how critical it is for business. Backups are mostly monthly for DP.
    2) Data extracted from APO planning area directly to DSO of staging layer in BW, and then to BW cubes, for reporting.
    For DP monthly, SNP daily
    You can also use the option 1 that you mentioned below. In this case, the APO cube is the backup cube, while the BW cube is the one that you could use for reporting, and this BW cube gets data from APO cube.
    Benefit in this case is that we have to extract data from Planning Area only once. So, planning area is available for jobs/users for more time. However, backup and reporting extraction are getting mixed in this case, so issues in the flow could impact both the backup and the reporting. We have used this scenario recently, and yet to see the full impact.
    Thanks - Pawan

  • Where to search for a specific Dimention related data

    Hi,
    I guess, hyperion planning store the dimention related data( parent, child, uda,attributes, consolidation operator, data storage etc) in some relational tables of that planning application. Can anybody help me understand where & how those data is stored and what are the table name I should look for a particular dimention related data?
    Actually I need to look into the planning RDBMS table to get the membernames of one particular dimention and search another huge Oracle database to search for those and retrieve the relevant data writing a query. I am using Planning ver9.3.1
    Please revert back for any clarification.
    Regards.

    Hi,
    Take a look at below tables in your application repository schema (db), they are all linked through id fields and they include dimensional infromation.
    HSP_OBJECT
    HSP_OBJECT_TYPE
    HSP_DIMENSION
    HSP_MEMBER
    HSP_ALIAS
    You get detail information from HSP_OBJECT. HSP_OBJECT keeps entire details for entire metadata. Other tables will help you understand the relations, positions etc.
    Cheers,
    Alp

  • Is there any way to find out what a specific line of data usage was for?

    There is a line on my bill for 97 MB of usage while I was bowling?  I was not using my phone.  How can I find out what it was doing for that specific charge?

    Just like you said earlier
    3.  Re: Is there any way to find out what brush is applied to a path?
           imagecollection     Apr 7, 2015 6:01 PM  (in response to Silly-V)   
    The skill of scripting in Illustrator is to (due to necessity) find the most difficult way to achieve the simplest of tasks...
    so to retort I say this;
    “I suppose it is tempting, if the only tool you have is a hammer, to treat everything as if it were a nail.”
      ― Abraham Maslow, Toward a Psychology of Being

  • Vendor Master Data: Tax Numbers for Bidders

    Hi experts,
    I would like to maintain Tax Numbers for Bidders (SRM7).
    I can see that, somehow, corresponding table to handle tax numbers is not displayed when maitaining Bidders from portal. Such table is only displayed when maintaining Suppliers.
    Does anybody know why? In order to implement the requirement, I thought of using Search Term 1 as Tax Number for Bidders, but I donot really like this way, taking into account that there is already a standard table to handle tax numbers :S.
    Thanks in advance
    Regards
    Vicente

    Hi Vicente,
    This is true. You cannot maintain tax numbers for bidders because they are not yet the finalised suppliers with whom you would want to carry out business. Only once you have accepted a bidder via supplier registration or supplier qualification, will these bidders be converted to suppliers. Then you can maintain tax numbers for them.
    The norm is that sensitive information like Tax details should not be maintained until you do business with the potential supplier.
    Regards,
    Nikhil

  • How do I add a comment to a cell in Numbers for iCloud beta like I can in Numbers for ios???

    I can't be the only person to find it incredibly frustrating that it seems impossible to add a comment to a cell in beta. I use this function a lot on my ipad - is it really not available in beta?? And if not, why not??

    Hey lolitajoon,
    Thanks for the question. You are correct, comments are hidden from all iWork apps when imported to iWork for iCloud beta. Please note that the current release of Numbers for iCloud is a beta version. Therefore, certain features aren’t yet supported.
    Opening iWork files in iWork for iCloud beta
    http://support.apple.com/kb/HT5663
    Features that behave differently after importing your document
    These features behave differently in iWork for iCloud beta. They don't change in the original copy of your iWork for iOS or iWork for Mac document.
    Importing from all iWork apps
    - Comments are hidden.
    Additional information:
    Numbers for iCloud beta: Coming soon in Numbers for iCloud beta
    http://support.apple.com/kb/PH12840
    Thanks,
    Matt M.

  • Dates in numbers for iPad 2

    I have see many complaints about Numbers for IPad not being able to handle dates very well, especially when in porting an Excel sheet. Is this a problem ?
    I have many Excel sheets that require dates, will I be able to use them ?
    Thanks

    Your friend was close, but forgot one thing. If you want it to be blank if either cell is MT, then you need an OR as well o test if either one or the other is blank...
    =IF(OR(ISBLANK(a1),ISBLANK(b1)),"",a1xb1)
    The isblank can also be represetned by ="" in many cases, usually accompanied with a trim to make sure there are no spaces were entered...
    =IF(OR(TRIM(a1)="",TRIM(b1)="")),"",a1xb1)
    Jason

  • Mail Merge using data from Numbers for iPad

    Here is my situation:
    I use Numbers for iPad to collect data on-site when I'm doing estimates. I then download the data from iCloud to Numbers on my laptop and complete the estimates. I would then like to be able to merge the data into a proposal template I've created in Pages.
    The issue seems to be that Numbers for iPad removes header rows but Pages won't accept a Numbers document as a merge source unless it has header rows.
    Has anyone found a workaround for this?

    I was using Excel and Word for my small business. Then in 2007 I upgraded the whole office to Apple, began using Numbers for basic invoicing. Back then, the solution I found was to use CSV export to InDesign. A few days back I downloaded the 09 tryout and thought using mail merge would be easy.
    I get the false populating too: I assume it comes from empty records, as they do not overwrite field names. Somehow I don't think I'm going to go through 2 years of accounting records to reformat my spreadsheet, just so Pages can correctly work with data that is in fact correctly formatted.
    Also, there must be an option with the mail merge feature to choose which records I want to merge?!? The current solution (duplicating and erasing unwanted ones) is ridiculous, hiding unwanted rows in Numbers also doesn't work.
    As most of the new features in iWork 09 are cosmetic, this one would have been a reason to use iWork as a real office suite. Pity - not really worth the update.

  • Change runtime for a specific report

    Hi All,
    I was wondering if it's possible to change the runtime limit for a specific report in SAP. So for example if the general runtime limit is set to 20 mins, can I change this to 45 mins for one specific report?
    Thanks.
    Manu.

    Hi,
    I dont think it is possible to change the runtime for a single report. By runtime, i mean runtime in foreground.
    It is a BASIS setting and will be allied to ALL reports.
    Contact your BASIS admin for further clarifications.
    Regards,
    Shashank

  • How can I perform data logging for a specific time??

    hello everyone,
    I am quite new in labview and I have a basic question regarding data logging. Currently I am using a cRIO9074 and doing some data logging for my test. The data logging it self works ok so far.
    But my problem is I would like to write my datas in a text file either for a specific time interval (ex)10 seconds) or for a specific amounts of data (ex)500 Samples). Can anyone give me some help regarding my problem?? Attached you can find my RT.vi 
    I would appreciate for anyhelp!
    Regards
    Yun 
    Attachments:
    BP250 Encoder Position & Velocity (Host).vi ‏92 KB

    Run your loggging program for that time. When your program terminates then it will write all the logged data so far in text file.
    Kudos are always welcome if you got solution to some extent.
    I need my difficulties because they are necessary to enjoy my success.
    --Ranjeet

  • Stop Depreciation for a specific Dep Area

    All
    I am able to stop depreciation for a specific period. My requirement is to stop depreciation for a specific Depriciation Area -01. My client has 4 dep area's (01,02 & ..). Depriciation has stopped in both the depriciation areas (01&02). I had activated Asset shut down and increased the useful life only for Dep Area 01 & not Dep area 02. Both Dep Ar. 01 & 02 use the same Dep Key. Client requirement is Dep has to be stopped for a specific period and specific Dep Area(01). I had stopped dep for a specific period but this has stopped for both the dep area's (01&02)..
    Is there a solution to the above. Please let me know if any.
    Regards
    Sekhar

    Check by marking indicator D-Default value from company code and depreciation area in definition of depreciation key in AFAMA.
    Thanks and regards
    Kedar

  • Network ACL for two specific ports

    As far as I can tell there is no way to set Network ACLs such that only two specific ports are available. I'm using Oracle 11gR2.
    I'd like a HTTP port and an SMTP port open for the local loopback address. These are ports 7777 and 25. It's my understanding that you can have only one ACL per host. While it seems you can create more, any additional ACL's for the same host don't always work as expected. So does anyone have any advice as how I can do this? I'd rather not have every port between 7777 and 25 available but this is what I currently have...
    DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL(
    acl => 'local_loopback.xml'
    , host => '127.0.0.1'
    , lower_port => 25
    , upper_port => 7777
    );

    Billy  Verreynne  wrote:
    As far as I can tell there is no way to set Network ACLs such that only two specific ports are available. I'm using Oracle 11gR2.>Not so in my experience. An ACL can be for a specific target, but contain multiple ports for that target.
    E.g. I assign ports 80, 7777, 8080, and a few others, in a single web-acl.xml, to a network target (host or domain).
    Read the usage notes in Oracle® Database PL/SQL Packages and Types Reference.>Thanks I'll try that. I think we had problems in the past with separate ACL's containing rules for the same host, the response we got back from support was not to do that. This way didn't occur to me.

  • I want to set default printer settings to be used only for a specific type of application, certain documents. All other print jobs should use a different default setting for the printer.

    I am printing a specific document from a web based application. This document need to be printed in landscape. So I would like to set the default settings for this specific printer to landscape. But for all other printers it should be portrait. But this does not seem to work. The browser picks the settings from the standard/default printer and uses this for all print jobs.

    Embie wrote:
    I was told by support that my problem was a hardware problem and that HP would not replace the faulty hardware.  Great.  I will replace my faulty hardware manufacturer.  Simple, HP never again.
    In the hour since you have registered you have posted seven messages, none of which contain any useful information that would allow someone here to help you.  Please read this post then provide some details in a new thread.  What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth?  What is the problem you are having (with the printer...)?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Where to maintain Turksih translation for customer specific status?

    HI gurus,
    How was your New Year?
    I am kindaa of stuck at maintaining translations from English to Turkish. To maintain translation e.g. For Ee grp I go to Table T501 > on the menu GOTO > Translate > select the language > enter Turkish words. but for the following the translate option is coming dim for me. I don't know if there any other place to maintain it. I am having trouble with the following:
    - customer specific status    Table: VV_T529U_1__AL0   or  Prnl mgmt. > Pernl. admn. > Custm proc. > Create cust. Spec. status               
    - Marital status  V_T502T   or Prnl. Mgmt. > Prnl. admn. > Personal data > Personal Data > Create Marital Status
    - Pay scale type V_t510A  or Prsnl mgmt. > Prsnl admn> Payroll data > Basic Pay > Check Pay Scale Type
    Thanks a ton,
    JEss..

    Hi
    I was able to do the translation for customer specific status and MArital status. For this, when logging in change the language to Thai > Use Tcode SU3 > on the second tab change the language to Thai. from here, everything comes in Thai. you can easily maintain it from there using your table or through SPRO.
    Thanks,
    JEss..

  • [svn:cairngorm3:] 16337: Fixing an NPE for a specific scenario:

    Revision: 16337
    Revision: 16337
    Author:   [email protected]
    Date:     2010-05-27 00:41:31 -0700 (Thu, 27 May 2010)
    Log Message:
    Fixing an NPE for a specific scenario:
    when using multiple listeners for one validator and when some of the listeners become null and a reset() on the validator group is called.
    Modified Paths:
        cairngorm3/trunk/libraries/Validation/src/com/adobe/cairngorm/validation/ValidatorMultipl eListeners.as

    Wow that was a very quick response. Thanks camickr. I am only trying to delete a single row. I do not know how to go about posting a test program for the code I have posted above because honestly the gui itself is 800 lines of code, and then the file reading class is quite funky in itself. I can maybe email you the entire Netbeans project including code so if you are using Netbeans 5 RC2 you can run the code and see for yourself, but that would not be considerate of me.
    See I am trying to delete any row at any time...but only one at a time not multiple rows...so if a user decides to delete row 23 and then tries to delete the last row which happens to be row 33 in my case, my setup should be smart enough to still allow to delete the row.

Maybe you are looking for