Is it possible to see all pages in one document at once?

Hey.
So I can't figure out if it's possible to see all pages in one document at once, so that it's all on screen at the same time.
Is it possible and if it is then how so?
Thanks in advance for any kind of help

Wouldn't that depend on how many pages there are, how large your screen is and how small you were willing to put up with in the thumbnails?
Peter

Similar Messages

Scanning multiple pages as one document

When I was using Windows XP with my HP 3055 I could scan multiple pages as one document. Since I have upgraded to Windows 7 Pro, when I scan, each page is scanned as a new document. Also, I no longer have the option to scan the document as a pdf. The pdf problem is not that important, but it is very important to be able to scan multiple pages as one document. How can I make my HP scan all pages as one document?
Thank you.

Hi @flyrod40 ,
I see that you would like to be able to scan multiple pages to one file. I would be happy to help you.
What printer do you have? Deskjet 3050 or the Laserjet 3050.
How Do I Find My Model Number or Product Number?
If you are using the HP Scan Software, open the software, select the link for Advanced Settings, then click on the File tab and put a check mark in Create a separate file for each scanned page. This will allow you to scan multiple pages to one file.
Here are the screen shots.
Hope this helps.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HT201317 Is it possible to see all my old pictures I've taken on my iPad, oacn my new Mac?

Is it possible to see all my old pictures I've taken on my iPad, oacn my new Mac?

Sure. You can import camera roll photos to iPhoto as explained here: http://support.apple.com/kb/HT4083. If these photo stream photos aren't in your camera roll, save them to the camera roll and then import them. To do this open the my photo stream album, tap Edit, tap the photos, tap Share, tap Save to Camera Roll.
There are also apps that will transfer them to your Mac over wifi, such as PhotoSync.

How can I see all pages I have created?

Hello!
I've looked everywhere on the web and I couldn't find an answer. I have this old server that has discontinued several of it's older pages, and is now only using one. I need to clean up old links, and get rid of all the old information. I have restricted access to Contribute, so I'm not sure if I'm missing on something because of that. I can't see all pages throught that left side panel. The only way I can see the documents and pages attached to this sever is if I go to this "Choose" button beside the URL entry tab, it will open up several files and indicate theirs respective pages. Are those all the pages from the server?
I'm guessing I could also do it through FTP client, but I don't have access to it as of now. Please help me figure this out! :}

Hi,
The Pages Panel lists only the web page which you are currently editing. And when you click Choose button, it will display the web pages in the server, to which you have access to. That is, if an administrator has restricted you to edit only web pages in a particular folder in the server, then, it lists web pages only from that folder. It will not show web pages which are in the other folders.
Hope this helps.

I'm working in Pages 4.1. I want to add text to a header but for it to appear only on that page in stead of duplicating itself on all pages of the document. How can this be done?

I'm working in Pages 4.1. I want to add text to a header but for it to appear only on that page in stead of duplicating itself on all pages of the document. Can this be done?

See this thread: https://discussions.apple.com/thread/3728197?start=0&tstart=0

How can I get my Indesign script to apply to all pages in the document?

My script (java) shown below will only apply to the first page of the document. How can i get it to apply to all pages of my document? What am I missing? Thanks.
scirpt:
myDocument = app.activeDocument
with (myDocument.pages.item(0).marginPreferences){
columnCount = 1;
//columnGutter can be a number or a measurement string.
columnGutter = "0";
bottom = "0"
//When document.documentPreferences.facingPages == true,
//"left" means inside; "right" means outside.
left = "0"
right = "0"
top = "0"
inside = "0"

Hi,
You have to iterate through all pages.marginPreferences:
var
myDocument = app.activeDocument,
allPagesMaPref = myDocument.pages.everyItem().marginPreferences,
curPageMaPref;
while ( curPageMaPref = allPagesMaPref.pop() )
with (curPageMaPref) {
columnCount = 1;
//columnGutter can be a number or a measurement string.
columnGutter = "0";
bottom = "0"
//When document.documentPreferences.facingPages == true,
//"left" means inside; "right" means outside.
left = "40"
right = "0"
top = "0"
inside = "0"
Jarek

How to copying all pages at one shot?

Does anybody know of a way of copying all pages at one shot, under a tabset in an application in a workspace to another application in the same workspace instead of doing it page by page?

There is no Select All option, but you can do it a little faster than opening each email and tapping the Trash icon. In the top rightcorner of the list of email is an edit button. Tap Edit.
You can then tap each email in the list to select it for deleting and then tap the Delete button at the bottom of the list.
These screenshots are from my iPad, but it works the same on my iPhone.

Smartform All pages in one print preview problem

Hi
     I am displaying the employee data in ALV with checkbox selection.. i put two user defined buttons like print and print preview. when user clicks on print button, smartform will call for very employee in loop and print it employee wise. But my problem is when user clicks on print preview by selecting multiple checkboxes , I need all pages(employee wise like page1,2,3..) in one print preview. I done but for every employee,i have to press the BACK button. But I need all pages in one preview. I'm pasting my code here. Can anyone suggest??
WHEN 'PREVIEW'.
w_cparam-no_dialog = 'X'.
w_cparam-preview = 'X'.
   w_cparam-getotf = ' '.
   w_outoptions-tddest = 'LOCL'.
   w_outoptions-tdnoprev = ' '.
    w_outoptions-tdimmed = 'X'.
* to reflect the data changed into internal table
      IF ref_grid IS INITIAL.
        CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
          IMPORTING
            e_grid = ref_grid.
      ENDIF.
      IF NOT ref_grid IS INITIAL.
        CALL METHOD ref_grid->check_changed_data.
      ENDIF.
loop at i_data into wa_data where SEL = 'X'.
MOVE-CORRESPONDING WA_DATA TO WA_PRINT.
APPEND WA_PRINT TO I_PRINT.
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        FORMNAME                 = 'ZHRF1_PTAR1001'
*       VARIANT                  = ' '
*       DIRECT_CALL              = ' '
     IMPORTING
       FM_NAME                  = FM_NAME
*     EXCEPTIONS
*       NO_FORM                  = 1
*       NO_FUNCTION_MODULE       = 2
*       OTHERS                   = 3
    IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
CALL FUNCTION FM_NAME
    EXPORTING
*     ARCHIVE_INDEX              =
*     ARCHIVE_INDEX_TAB          =
*     ARCHIVE_PARAMETERS         =
     CONTROL_PARAMETERS         = W_CPARAM
*     MAIL_APPL_OBJ              =
*     MAIL_RECIPIENT             =
*     MAIL_SENDER                =
     OUTPUT_OPTIONS             = W_OUTOPTIONS
     USER_SETTINGS              = 'X'
      FR_DATE                    = PN-BEGDA
      TO_DATE                    = PN-ENDDA
   IMPORTING
*     DOCUMENT_OUTPUT_INFO       =
    JOB_OUTPUT_INFO            = T_OTF_FROM_FM
*     JOB_OUTPUT_OPTIONS         =
    TABLES
      ITAB                       = I_PRINT
*   EXCEPTIONS
*     FORMATTING_ERROR           = 1
*     INTERNAL_ERROR             = 2
*     SEND_ERROR                 = 3
*     USER_CANCELED              = 4
*     OTHERS                     = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR: WA_DATA,WA_PRINT.
CLEAR: I_PRINT.
ENDLOOP.

Hi friend sure.
You need to increment the index only at the loop no where else and the variable for holding the index value is global.
If you create before the read every time it gets trigerred.
After each loop you assign the sy-tabix value to that variable.
Just like this ,
v_index = sy-tabix.
Then at the window just read the table as shown
READ TABLE t_chq INTO x_chq INDEX v_index.
This will do friend.
I will update the flow of my code here, then you many understand it much clear.
Page1
Main window (below page1)
    Loop (inside Main win)
      program lines. code : v_index = sy-tabix. v_lines = lines( t_chq ). (inside loop)
      Condition (inside loop)
         True
            check the v_index < v_lines if true break page, for page break create a command and do it (Inside true condition)
         false
           blank.
Secondary window (below page1)
    program line (inside sec wind)
    Inside program lines the code is READ TABLE t_chq INTO x_chq INDEX v_index. (inside sec wind)
Secondary window2 (below page1)
     program line (inside sec wind2)
    Inside program lines some other code. (inside sec wind2)
This is my logic try like this friend.
I think for other records its coming fine because since it is an local variable its getting updated some where and also showing 1 bec its always initializing.
Try this you will get if any issues please revert back to me
Thanks,
Sri Hari
Edited by: srihari.kumar on Jan 6, 2012 11:04 AM
Edited by: srihari.kumar on Jan 6, 2012 11:05 AM

FW CS5: Copy Page from one document to another without changing layers

Hi,
how can I copy a Page from one document to another without changing the layers?
Drag-and-drop isn´t possible and by Copy-Paste all elements are placed in the same layer.
Greetings,
toho

Use File > Import.
Open the File, then navigate to the page you want to import
Be sure to select Insert after current page, or FW will just import the content into the current page itself.

Copy a page from one Document to another

Can anyone help
In Pages '08 we had the ability to copy a page from one document to another.
In Pages '09 this does not seem possible.
Does anyone have anwser....
Thanks
Message was edited by: AJCUR
OK my bad
I just realized that I was in Word Processing in one document and Page Layout in another and you cannot do the copy between the two. Changed the Blank documentto word processing and voila it worked.

I think this might help. Go to the document you want to copy the page from and go to the "View" menu and choose "page thumbnail" so you can see the thumbnails on the side of the document. Right click (or control click) on the thumbnail of the page you want to copy and choose "copy.
Go to the document you want to paste the page into and make sure you have the "View thumbnail" option turned on. If you already have some pages click on the page you want the new page to follow and then right click and paste the page where you want it. (you have to do this in the thumbnail view area, not in the actual document itself.) If you have inserted the page in the wrong spot, just drag it to the right location. note: I have tried dragging the thumbnail from one document to another and it does not work. Too bad because it works that way with a PDF documents in "Preview" app.

Moving pages from one document to another in preview

I have two PDF documents open with the sidebar on my desktop. I have moved a page from one document sidebar to another and then saved the document with the additional page. When I open the document the added page is not there. This is extremely fustrating as I have tried this all different ways. Any suggestios???

See my reply in this thread here:
Merge 2 pdf files into 1 ?: Apple Support Communities
The movie is still available, watching it may help, it shows a method for adding all the pages from one PDF to another. The general idea of where to drag in the destination would still apply for adding just one page.
Francine

Scanning multiple pages in one document

I am trying to scan multiple pages in one document. I am using a HP Envy 4501 All-in-one and running Windows 8.1. I used to be able to do this at one point but for some reason, lately I am not able to. I have read other posts that spoke of a "+" sign on the left side of the screen, but it is not there for me. Also, I cannot just save the page and scan the next without having to save them under different file names. Please advise.
This question was solved.
View Solution.

Hi,
From the HP Software click on Scan a Document or Photo and ensure the Sow Scan Preview is checked.
Reduce the Scan Resolution into 300 or a lower resolution and press on Scan, then the add button should appear again.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How do I scan multiple pages into one document?

How do I scan multiple pages into one document?
HP Photosmart 5514-e-All-in-One Printer B111h
Model CQ 183 A

Hi,
Have you tried this (using PDF format).
Launch the scan from the HP Solution Center
Click Change Settings.
Select the desire Scan Shortcut, then click Save to file save options
Make sure Create One File per scanned page... is Unchecked, Approve and perform the Scan.
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

[CS3 JS] Move pages from one document to another?

First, a brief explanation of what I am trying to do. I have several individual chapters that I am including in an INDD book. However, I also want to be able to allow those individual chapters to stand alone, meaning that I want to add a cover/title page to each chapter file (these two pages would be placed before the current page 1 of each chapter).
My preference would be to write a script that would open the cover/tp file and open the first chapter file; this part is no problem. Where I am running into trouble however, is the second step: moving the cover/tp pages (2 pages) over into the chapter file.
Manually, I would open Cover.indd, activate the "move pages" menu, "Move pages: 1-2", "Destination: Before_Page 1", "Move to: Chapter1.indd".
With over 100 chapters in the book, however, I would prefer to automate the process. I have looked into the Page.move and PageItem.move elements, but both look like they would require a location in the current document (either in (x,y) form or using "AT_BEGINNING".
If I cannot get this to work, I will likely try to insert two blank pages, then cut/paste with a script, but I would prefer the "move" functionality, if it is possible.
A couple of answers to potential questions:
I can't simply place the INDD cover file b/c it uses a text variable to pull the chapter name; this personalizes each stand-alone chapter.
Same answer to why I can't just slap the 2-page .pdf on the front of each. I need the text variable to still be active.
Has anyone tried to move pages from one document to another using scripting? I tried to explain what I am trying to do, but if it doesn't make sense, I can try again. :)
thanks!
Matt

ok here we are
I get a raw skeleton that you will have to adjust but it's functional.
Use a PDF for placement as you can specify the page that you want to place.
I don't know if you can do the same for indesign files.
So basically, it starts adding 2 pages and placeing the pdf in the same time.
After that, it creates the textVariable and the frame that will receive it.
Here you are:
//If a document is open
if(app.documents.length!=0)
var ad = app.activeDocument;
//Pages placement
for(i=0; i<2; i++)
//Add 2 pages on top of the document;
var tmpPg = ad.pages.add(LocationOptions.BEFORE, ad.pages[0]);
//Here you place your pdf
app.pdfPlacePreferences.pageNumber = i;
tmpPg.place(File(cover.pdf), false)
//You should specify page x and page y but ain't found yet the way to go.
//Text variable creation
//Check if the textVariable named "txtVar" does not already exist...
if(ad.textVariables.item("txtVar")==null)
//if not found, create the text variable named "txtVar"
var txtVar = ad.textVariables.add();
txtVar.variableType =VariableTypes.CUSTOM_TEXT_TYPE;
txtVar.name = "txtVar";
//Set the contents of the text variables to the string "test"
ad.textVariables.item("txtVar").variableOptions.contents = "test";
//these coordinates don't care aboutyour units but you may adjust them to your needs
var y1 = ad.marginPreferences.left;
var x1 = ad.marginPreferences.top;
var y2 = y1+5;
var x2 = x1+25;
var myFrame = ad.pages[0].textFrames.add({geometricBounds:[y1,x1,y2,x2]});
//Set the contents of the frame to the text variables "txtVar"
myFrame.contents=ad.textVariables.item("txtVar").variableOptions.contents;
//You may want to stylize the txtVar
//In this case, either you use a existing characterStyle or you create one in the script
Bye Loic

Copy single master page from one document to another?

The answer to a previously posted question seems to involve creating a document differently (than I had). A lot of work went into the creation of the master pages in the original document which I will now need to recreate in the new document. Is there a way I can copy one master page from one document to another?
Many thanks,
Theresa

There are a number of ways to do this.
Create a copy of the document you want to copy the Master page from. Delete all pages except for the one you want (but you have to leave Right and Left alone as FM must always have these two pages available).
Open the new document and the one that you want to import the master pages from.
In the new document:
Import from Document: (select the document with the Master Page that you want)
then
File > Import > Formats
and select Page Layouts only.
Note that Right/Left always come along for the ride.
Alternative and probably best way to get a single Master Page:
In new document, add a new Master Page and select "Empty".
In the old document, on the desired Master Page, Select All on page (ctrl+A) and then copy (ctrl+v).
In the new document on the new master page, paste (ctrl+v) to add the layout. Note: you may need to rotate the page first if it isn't in the same orientation as in the old document.

Is it possible to see all pages in one document at once?

Similar Messages

Maybe you are looking for