Is it possible to select multiple anchor points in CS6?

Hi,
I'm trying to select multiple anchor points of shapes across different layers by dragging over them, but nothing is getting selected.
I use CC at work, and I've done it there, but I use CS6 at home and can't seem to do it.
Thanks!

I doN'T think it is possible to work on two different path at once. I think you would need to merge the two shape layers and work on the resultant merged path. You can target more then one shape layer and select some of the path and change them however the stay separate path and all the point the the selected shape layers are highlighted
CS6 top CC bottom note the difference is the path palettes CS6 shows no paths in the path palette when more then a single shape layer is targeted where CC shows all path involved as separate paths.

Similar Messages

In Flash CS4, how do you select multiple anchor points across separate layers?

I am talking about anchor points on a line, not a keyframe. They are also called "handles". I can select the anchor points as "white" quickly, but I can't get them to be "solid"without doing it layer by layer, which is tedious. What I want is way to select lines that are in different layers and get the points I selected in a way similar to the regular selection tool or free transform tool. I have been trying to do this all day and I can't find a good way to do this, and I would appreciate any help.
Here is an image of what I'm trying to do, but more easily. The lines are on separate layers, but when I select them with the subselection tool I have to go layer by layer selecting the points. I'm trying to look for a very quick way of doing it. When I do select all with the subselection tool on, the anchor points are only "white" and not "solid" as shown below.

Now you're post was a while ago and I still need a solution, but I have to say this. I didn't mean to be rude to you; it’s just that it doesn’t answer my question I specified in the original post. I know your intentions are good, but it frustrates me when someone doesn’t fully read a post and offers a solution, it sometimes gives a false impression that the problem is taken care of. Example of being "helpful": http://forums.adobe.com/message/2540277 Yes I know there is a “Yes, my question has been answered,” but you know they don’t always select it, and other people know that as well. But you are right; I should probably act a little bit nicer and reiterate what I’ve already said before, I’ll probably get more help from it. It just seems to be a simple feature that seems to be needed to be in the program. I didn't mean it takes forever to move, it takes forever to select multiple anchor points across, let's say 10 layers, so that's 10 different lines on 10 layers. You have to select each layer and then select the anchor points. If there is an away to select anchor points across all layers in one go please tell me. Maybe I was wrong, but I could’ve sworn I’ve seen ideas that were posted on here get taken into Adobe as a suggestion, but yes I submitted it as a suggestion to Adobe, but I wanted to confirm that there was no way of doing it first since it seems kind unbelievable because the regular selection tool works across multiple layers.

Adjusting multiple anchor points of a path

In CS5, and in various documentation it doesn't appear possible to be a way to move multiple anchor points (as it is, in Photoshop). If this is the case... are you kidding me? Even Photoshop can do this.
Quite frankly, on my return to Illustrator, it's, as expected, Adobe has pulled a fast one with their suite of software. What was broken years ago is still broken today.
Photoshop needs the ability to add gradients to shapes, path brushing, symbols, ie the functionality of Illustrator needs to be placed into Photoshop.

Are you saying that if you use the direct select tool and hold down the shift key and select several anchor points you can't move them with the arrow keys?
I certainly can without any problem? It maybe that the increment that they are being moved at is smaller than you would prefer and you can change that in the Preferences.
Also unlike photoshop if you select multiple points in AI you can than drag one of them and the other selected points will move as well.
If you need more support for manipulateing path look at the Astute plug in Vectorscribe.

Is it possible to select multiple clips and create a sequence from each individually?

Is it possible to select multiple clips and create a sequence from each individually? If you select multiple clips and select "New Sequence from Clip" it puts all of the clips into one sequence. Is there an easy way to quickly perform this on multiple selected clips separately?

So now I *have* used Butler with PPro, and it works very well, here's an idea of how to do it:
Import folder of clips
Ensure first clip selected in bin and sorted by Media Type
Most of these commands need shortcuts assigning - mine listed below
Macro:
To create seq from selected clip:
‘New seq from clip’ (Shift+CMD+N)
To duplicate this seq:
‘Reveal Sequence in project’ (Shift+F) - not strictly necessary as it will already be selected
‘Window | Project’ (CMD+9)
‘Edit | Duplicate’ (Shift+CMD+/)
To rename the duplicate
‘Enter’
Various keystrokes to rename as required
‘Enter’ - to make name stick
‘Shift+Enter’ - to reselect that sequence
‘Esc’ - to get out of editing name
To change resolution of duplicate:
‘Sequence Settings’ (CMD+5)
‘Tab’ x 3 (to get to H Frame Size)
‘xxxx’ (to enter frame width)
‘Tab’ x 1 (to get to V Frame Size)
‘yyyy’ (to enter frame height
‘Enter’ x 2 as prompt will say previews will have to be deleted
To then find next clip ready for macro to run again:
‘Open in Timeline’ (Shift+CMD+O)
‘Match Frame’ (Shift+Spacebar)
‘Reveal in Project’ (Shift+CMD+F)
‘Window | Project’ (CMD+9)
‘Down Arrow’ - to select next clip
I tried it with Butler (manytricks.com - free trial, $20 to buy) and it worked a treat, takes about 3 secs per clip
AHK (for windows) is at autohotkeys.com and is free.
You could start making multiple macros - that would enable you to do grade / resize in middle of duplication - and then export etc, but I figure you can figure that out ;-)

Direct selection - moving anchor points with keyboard arrow keys

Hi,
I am using Illustrator CC. I just used the image trace tool to create a vector version of my company logo. It worked pretty well, but I am now just trying to clean it up a bit. I have a few anchor points that I just want to nudge up or down in the smallest increment possible.
I think it would be easier for me to do this using the keyboard arrow keys rather than using the mouse, but the arrow keys cause my selected anchor point to jump by way too large of a distance. I checked to make sure Smart Guides, Snap to Grid, and Snap to Point are all turned off. I can't think of anything else to do.
Can anyone tell me what controls how far the keyboard arrow keys will move an anchor point, and how I can set this to the smallest possible distance?
Thanks in advance,
Paul

Under Preferences (Command-K on Mac), on the first screen there is Keyboard Increment. This is the amount the arrow keys will move selected content, such as anchor points.
I usually keep this at "0.005 in", but when doing things that need extreme accuracy, I change it to "0.0002 in", which on my screen (2560 x 1600) is one pixel at AI's 6400% magnification.

PS CC - how do I select individual anchor points of a shape?

In PS CS 6 it used to be possible to draw a shape, like a rectangle, and then use the direct selection tool to select and move one corne of the rectangle. However, in PS CC this does not work anymore. When I try to use the direct selection tool, all anchor points remain selected and so I can't move a single point, just all of them at once. What might I be doing wrong? Did something change in the CC version?
Thanks!

I seem to be able to use the Direct Selection tool to edit points, e.g., on a rectangular shape, to select one only and move it around.
When I select the shape layer then choose the Direct Selection tool (white arrow), the path shows.
When I click on the path all the points show, with "hollow" handles.
When I click on only one point it turns black, then I can move it with another click and drag. In fact, just one click, hold until the point turns black, then drag seems to work.
Of course, you've got to be VERY accurate where you click.
And Trevor, I seem to be able to drag a box around several points, then move them. What am I doing right, accidentally or on purpose? Is there some kind of bug being invoked in certain documents maybe that I'm not seeing in my testing here?
-Noel

Is it possible to move the anchor point for an inline object?

I have noticed that sometimes the anchor point will get inserted in the middle of a word resulting in the spellchecker marking the word as misspelled.
I can't seem to find any information in the documentation about moving an anchor point. Is it not possible?
Thanks

Krisler,
Select your Inline graphic. Then click on the center of the graphic and drag the mouse's pointer into the text. When you get your pointer into the text you will see the insertion cursor (vertical bar) just at the tip of the mouse arrow. When you let go of the mouse button the insertion point for the graphic will be where the insertion bar was at that time. The key point is to concentrate on the position of your arrow tip as you attempt to reposition the insertion point.
Jerry

Is it possible to select an anchored object in a text frame in InDesign in a script?

I would like to know if it is possible to write a script to select an anchored object in a text frame. All the scripts I have found so far do not work on anchored object.

Check out this thread.

Selecting path / anchor point

Hi guys!
I am just browsing around the trial Ai CS5 version and there is something, which I do not really understand...
When I use Selection Tool {V}, it works pretty fine, but when using Direct Selection Tool {A}, I can not select the path or anchor points. When I hover over them, the underlying path or anchor point highlights, but after click, nothing happens. When I move mouse out of the clicked object, the highlight simply disappears. There must be some kind of bug, because in the Layers Panel, there is the selection highlighted and after hitting arrow keys, the points, which I selected are moving - depending on which arrow I am actually pressing.
So in the nutshell: When I am trying to select single point or just path, the selection is not visible, but the points are still visible.
Thank you for your help!

You are welcome, Christian.
It happens to many.
I believe it may be caused by the fact that H is surrounded by other keys used with Ctrl/Cmd; a mishit may go unnoticed (I wonder whether this term will pass the nanny filter) when the right key is hit afterwards.

Is it or has it ever been possible to select multiple PDF's and print into a single print stream using Reader

We have Multiple users who claim they have been able to select multiple PDF's and select print. It then would send to a single stream and end up as one document. These are reader users.
We have tested under reader 10.1.4 and 11.0.06 and haven't been able to make it work. Has this ever been possible?

Thanks everyone. That's what I needed to know.

Is it possible to select multiple values from an enumerated list?

I have a Category with an Attribute defined as an enumerated list. Is it possible to select more than one value from the enumerated list? If not, does anyone have a recommended approach for configuring Categories or Attributes that often have more than one of the Attribute values selected? Do I just use multiple Categories and/or Attributes with the same enumerated list? If so, is there an efficient way (API, maybe) to copy the enumerated list values from one Attribute to a new one (or one Category to another)?
Thanks for any ideas!
~Mark

Boy, this is something we're struggling with too. So we'd like to hear others' ideas on this also.
thank you,
iggy

Does anyone know how to select multiple files in photoshop cs6 on macbook pro lion

I'm new to Mac operating system. Can anyone tell me how to select multiple images in cs6 photoshop? Without having to hold down a shift or cmd key and clicking on each one.

I assume you are using the Shape tool to draw your hexagons. After you drag out the shape, use the Transform controls to tweak the size, so that the width is evenly divisible by 4, and the height is an even number. If you wand a gap between shapes, include that in your adjustments. Make a note of the new width and height.
Once the scaling is committed and the shape is selected, Control+Alt+T to Free Transform Copy, and in the Option Bar, set the X and Y to Relative. Set X to zero, and Y to the height you set earlier, and commit the Transform. Then Repeatedly press Shift+Control+Alt+T to make more transformed copies.
With a vertical column of shapes, Alt-Click on the Shape Path in the Paths panel to select the whole path. Control+Alt+T again. This time, again using relative, set X to three-quarters of the width you noted earlier, and Y to one-half the height, and commit
Finally, again Alt-click on the Shape Path in the Paths panel, and Transform Copy relative with X = one and a half times the width you noted, and Y to zero. After committing this, Shift+Control+Alt+T as above to extend more columns.
And JJ, those are Octagons .

Possible to select multiple messages in Mail?

I'm in the process of switching to Mail and am setting up rules. I want to apply a rule to multiple messages at one time, instead of applying the rule to each individual message, one by one. I cannot find a way to Select All or otherwise apply a rule to a bunch of messages (that are already in my InBox) all at once. Can anyone help? Thank you!

Camelot wrote:
to select all messages in the current mailbox you enter command+A. then use "apply rules" from the Message menu. you can also do it with just a few selected messages. select them, control-click on the selected messages and choose "apply rules".
Interesting interpretation of the OP's request.
I read the request as wanting to take one action that applied to many messages, rather than apply one rule many times.
For example, consider a rule that forwards the message to some other address. Selecting all messages and running the rule will generate multiple new messages - one per selected item.
that was my understanding of what the OP wanted. perhaps I'm wrong. let's wait for the OP to respond and clarify what he/she really wants.
Conversely, and how I interpreted the request, an AppleScript could collate all the selected messages and combine them into one new message - essentially running the 'forward' on many items at once.
I'll be interesting to see the OP's response to see which matches his requirements.
Message was edited by: V.K.

Is it possible to select multiple dates from a calendar?

Hi All,
I am looking for a way of somehow selecting more than one date in the Apex calendar. What I am after is something like in Outlook you can select 5 days for one action.
Is something like that (or simmilar) is possible with Apex?
Regards,
Pawel.

Boy, this is something we're struggling with too. So we'd like to hear others' ideas on this also.
thank you,
iggy

Is it possible to select multiple layers by selecting first and last layers?

I frequently get Illustrator files in that have individual objects such as paths on individual layers that could be grouped to make the layers more concise. I find that I have to shift click each individual layer to select it to eventually group it. At times, I have 25 or so layers that I need to select. Is there a way to select the first and last layer in the layers palette, and have Illustrator select all layers in between?

Katrina,
And I guess it's the way I work. 1) I routinely select objects by selecting them from the layers palette, and not the canvas, so that I can't accidentally move an object that is the clients artwork. I prefer to work this way, as I consider it "safer". (I lock layers I'm not using) I routinely run into artists work that for instance, converted fonts to outline, and now each compound layer that is an individual letter is an object on it's own layer. 2) I need things grouped together and titled so that if I need to come back to this file and quickly fix something on press, I can tell what layer holds what object.
3) Therefore, I frequently need to select objects in a two mile long (slight exaggeration ) list of layers/sublayers and group them, retaining them in their same layers in the event an effect has been applied at the top hiearchy of that layer.
It would be great if a key, or combination of keys, would allow me to select the top object, scroll down and select the last object, and have Illustrator select all between those two.
If you create and use selections as suggested in post #12, you do have to select individual objects when they share layers with other objects (but you can select whole layers as well) in exactly the way you are used to (1), but you only have to do it once instead of having to repeat it (3), and you have them collected with a title so you can find them again (2).
At least it is part of the way.

Is it possible to select multiple anchor points in CS6?

Similar Messages

Maybe you are looking for