Is it possible to selectively block re-explode BOM in Sub-contracting PO ?

In our business scenario, sometimes we are directly adding PO components in the Sub-contracting PO in addition to the existing components that have come in through BOM. After saving and somedays later when the user goes to edit PO through ME22N, since the components button & re-explode BOM button are very close, users by mistake press re-explode BOm and also save the PO. The directly added components go out and hence not consumed while GR. Is it possible to selectively block the re-explode BOM through PO user exit or any other method?

Some amount of user training should help.
If not discuss with your abaper if badi - ME_PROCESS_PO_CUST can be used or you can find user exits with a search using MM06E*

Similar Messages

BOM Selection in Sub Contract PO

Hi,
Is it possible to select BOM in Sub Contract PO?
Scenario:
3 BOMs available for a Material.
Depending on Material Availability respective BOM (BOM1/ BOM2/BOM3) will be selected during Sub Contract PO, for this is it possible to get an option for selecting BOM1/ BOM2/BOM3 in PO.
bye
Sridhar Thota

Hi
may be it is possible through alternative bom. u can select the where ever bom is required.
reward me if u got the answer
thanks and regards
ram

MIRO - "select block" button

Hi!
When we try to enter one invoice through MIRO with a lot of lines (let's say about 300 from the PO), sometimes we need to select some of them, for example a block of them.
Is there any way we could add a "select block" button at the bottom of the MIRO screen?
Does anyone have any ideas of a faster way to process an invoice for lots of PO line items (without having to individually click each Purchase Order line)?
Thanks for helping!
Regards,
Maria

HI,
As per your requirement , you are easy to choose any line items as follow :-
1. P.O.number /line items :- select P.O.number & line items in selection criteria
2. Posting date wise selection :- select delivery note in selection & go to selection with help of F4 . in the screen ' Possible Entries of Delivery Note" choose vendor , posting date, plant or material . after getting the result you choose all line items or selective line items as per your requirement. Hope this is solve your problem.
snagorij

Looking for a select block

Hello!
I'm looking for a select block but I don't find it.. I want a block with four inputs,an input select, and one output. The output variable catch the value of the input variable which his position agree with the value of input select.
Ex.: I have input_1=20 input_2=30 input_3=40 input_4=50 and input select is 2. Output value is 30.
Exist a block like this? If not exist, which eay you try to build it? Thanks!
Thank you
Larson

Hi Larson
There is a select block - it is called "case structure" and is located in the structures palette (where the loops are).
You can use this structure to switch between different cases. You can have different types to control them.
Here is a simple example of what you want to do.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
Case.vi ‏17 KB

I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and I find it very annoying.

I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?

. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?
Check, if you have the "Primary Only" option enabled. Then keywords will only be applied to the "Primary Image":
See: Keywords or ratings are applied only to one of the selected images - why?
Uncheck the little square button with the "1".

Is it possible to select multiple clips and create a sequence from each individually?

Is it possible to select multiple clips and create a sequence from each individually? If you select multiple clips and select "New Sequence from Clip" it puts all of the clips into one sequence. Is there an easy way to quickly perform this on multiple selected clips separately?

So now I *have* used Butler with PPro, and it works very well, here's an idea of how to do it:
Import folder of clips
Ensure first clip selected in bin and sorted by Media Type
Most of these commands need shortcuts assigning - mine listed below
Macro:
To create seq from selected clip:
‘New seq from clip’ (Shift+CMD+N)
To duplicate this seq:
‘Reveal Sequence in project’ (Shift+F) - not strictly necessary as it will already be selected
‘Window | Project’ (CMD+9)
‘Edit | Duplicate’ (Shift+CMD+/)
To rename the duplicate
‘Enter’
Various keystrokes to rename as required
‘Enter’ - to make name stick
‘Shift+Enter’ - to reselect that sequence
‘Esc’ - to get out of editing name
To change resolution of duplicate:
‘Sequence Settings’ (CMD+5)
‘Tab’ x 3 (to get to H Frame Size)
‘xxxx’ (to enter frame width)
‘Tab’ x 1 (to get to V Frame Size)
‘yyyy’ (to enter frame height
‘Enter’ x 2 as prompt will say previews will have to be deleted
To then find next clip ready for macro to run again:
‘Open in Timeline’ (Shift+CMD+O)
‘Match Frame’ (Shift+Spacebar)
‘Reveal in Project’ (Shift+CMD+F)
‘Window | Project’ (CMD+9)
‘Down Arrow’ - to select next clip
I tried it with Butler (manytricks.com - free trial, $20 to buy) and it worked a treat, takes about 3 secs per clip
AHK (for windows) is at autohotkeys.com and is free.
You could start making multiple macros - that would enable you to do grade / resize in middle of duplication - and then export etc, but I figure you can figure that out ;-)

IS IT POSSIBLE TO SELECT 3 OR 4 FAVOURITE PERSONAS AND THEY APPEAR RANDOMLY WHEN YOU OPEN FIRFOX. THANK YOU KAY

hi....I like so many of your personas I would like to know if it possible to select 3 or 4 personas and then have them appear randomly when you open
firefox. Thank you Kay

See this extension - https://addons.mozilla.org/en-US/firefox/addon/personas-rotator/

When using AirPrint is it possible to select double sided printing

I am trying to use AirPrint to print from the Pages app on iPad Air running IOS 8.1.1. Is it possible to select any of the printer options, such as double-sided printing, when doing this?
Many thanks

Once you start to print using AirPrint, a display appears where you select the printer and options. Presumably the HP is your only AirPrint printer (as the Epson is mine). On that same screen, I can select the number of copies, and I also see an on/off slider for "Double Sided".

Push button "Select Block" on the list screen?Interactive report

Hi, i am developing a plain report(Use read data & write output, not ALV).
And there was a checkbox(itab-chx) before each line of the output list.
The customer wants me to add 4 buttons on the menu bar, they are 'Delete', 'Select ALL', 'Deselect all', <b>'Select block'</b>.
As far as i know that 'Delete' button is for the user to delete the entries which they have checked using the checkbox.
As for 'Select ALL' is that when they push this button, all the checkbox on the output list are checked.
As for 'Deselect all' is that ...all are unchecked.
<b>BUT</b> i dont have any idea on 'Select Block' function?? What it is and how to program and handling with this button???
Below is my code for those button, just dont know what 'Select block' means
at user-command.
case sy-ucomm.
    when 'DLT'. 'Delete
         'Do delete things...
    when 'SLL'. 'Select all
      loop at itab.
        itab-chx = 'X'.
        modify itab index sy-tabix.
      endloop.
      sy-lsind = 0.
      perform output.
    when 'DSL'. 'Deselect all
      loop at itab.
        itab-chx = ' '.
        modify itab index sy-tabix.
      endloop.
      sy-lsind = 0.
      perform output.
    when 'SBL'. 'Select block
      '???? No idea at all!!!
endcase.
Great thanks!!! Any helps?
Hoo lala
Message was edited by:
        Hoo lala
Message was edited by:
        Hoo lala

Refer this demo report, it is having 2 buttons one Call (defined in PF status) and other one PA30 one.
u have to create a PF status, and there in Application Toolbar option i have cretaed a button Named Call. like tht u can create more buttons as per ur requirement.
REPORT ZGILL_CALLREPORT                        .
DATA: L_PERNR(20).
parameters : p_rname(20) obligatory DEFAULT 'NONE'.
INCLUDE <icon> .
selection-screen pushbutton 60(20) gocfg user-command amit.
AT SELECTION-SCREEN OUTPUT.
write icon_configuration as icon to gocfg.
concatenate gocfg 'Go to PA30' into gocfg.
AT SELECTION-SCREEN.
if sy-ucomm = 'AMIT'.
SET PARAMETER ID 'PER' FIELD '10000000'.
call transaction 'PA30'.
ENDIF.
Start-of-selection.
write: 'This Report is called by report',' ',p_rname left-justified.
set pf-status 'TEST'.
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'CALL'.
submit zgill_it using selection-set 'TESTING_IT'
       exporting list to memory and return.
perform get_output.
WHEN '&F03'.
LEAVE SCREEN.
WHEN '&F15'.
LEAVE PROGRAM.
ENDCASE.
*&      Form get_output
*       text
* --> p1        text
* <-- p2        text
form get_output .
data : listobject like abaplist occurs 0.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject       = listobject
* EXCEPTIONS
*   NOT_FOUND        = 1
*   OTHERS           = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'DISPLAY_LIST'
* EXPORTING
*   FULLSCREEN                  =
*   CALLER_HANDLES_EVENTS       =
*   STARTING_X                  = 10
*   STARTING_Y                  = 10
*   ENDING_X                    = 60
*   ENDING_Y                    = 20
* IMPORTING
*   USER_COMMAND                =
TABLES
    listobject                  = listobject
* EXCEPTIONS
*   EMPTY_LIST                  = 1
*   OTHERS                      = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
refresh listobject.
endform.                    " get_output

[JS] select blocks of text

Hello,
How to select blocks of text embedded in the image to change their size?
thank you very much
Bonjour,
Comment sélectionner des blocs image ancrée dans le texte pour leur changer la taille?
Merci beaucoup

Here's a picture.
I have to select blocks and their dimensions changed blocks and changes the framing of the image and applied a style block ...
To start, my biggest problem is the selection inked block ... for the rest I cross that I should come
Voici une image.
Je dois sélectionner, blocs et changé leurs dimension les blocs et change le cadrage de l'image et appliqué un style de bloc...
Pour commencé, mon plus gros problème est de selection les bloc encré ... pour le reste je croix que je devrais y arrivé

CANNOT SELECT BLOCK OF TEXT. HOW TO CORRECT?

CANNOT SELECT BLOCK OF TEXT. HOW TO CORRECT?

I understand your frustration but please do not use all caps when posting--it "sounds" as if you're yelling to the eye. In any case, are you sure you're using the select tool and not the hand tool?

Is it possible to select a selection?

I know the question sounds weird but I couldn't think of a better way of describing what I want.
I'm setting up an Action in which I want to crop a series of images to a selection rectangle. I fool around with the position and size of the selection for several minutes before I'm happy with it, as well as doing several other things. I'd rather not record all that stuff in the action.
Given that I have a selection in front of me that is the one I want, can I tell the Action: "Now listen here, this is the selection I want you to make". If I record the Action, with the selection active, and then crop to that selection, when I run the Action it says "No selection made."
So, while recording an Action is it possible to select a selection that is already there?

Thanks, Willi, for the suggestion. But I couldn't get it to work inside an Action. I recorded Save Selection as part of an action, but of course, it saves the selection to that particular file. When the Action is run on a folder full of images, the Action comes to a halt because the saved selection is only in a certain image, and the Action doesn't know how to access it in an image that is not currently being processed.
I doubt whether a PS Action can save a selection as part of the action. Probably an oversight on the programmers part. The closest I could get was to record an Insert Menu Item, the menu item being Select All.
The interesting thing is: the scenario works when recording the Action. I set the selection, then start recording my actions – the crop and save and whatever – and it works. The image is cropped and saved. But when played back as an Action, the settings for that particular selection are not stored in the Action. And they should be. It would be quite easy to record the co-ordinates of the selection as part of the Action (X-Y co-ordinates of the four corners), but PS hasn't been set up to do it – as far as I can tell. The problem would be: the selection would only be valid for images of exactly the same size.

Creating an index: it's not possible to select a tablespace for the index

Hi,
we are using SQL-Developer Version 3.0.04.
When creating an index it's not possible to select a tablespace for the index. The only choice which is offered by SQL-Developer is <DEFAULT>.
The user itself has privileges on several other tablespaces - and therefore not just only on the default tablespace of the user.
Any help will be appreciated
Rgds
JH

Hi JH,
Well, the capability is somewhat buried in the UI, but it is there.
In the Create Index dialog ...
1. Tick the "Advanced" check-box in the upper right-hand corner.
2. Select "Properties" from the left-hand list (Definition, Properties, Partitions, DDL).
3. Click the Storage Options... button
4. Use the drop-down list to select the desired tablespace.
Return to (2.) and select DDL to see that your tablespace choice is present.
Regards,
Gary
SQL Developer Team
Edited by: Gary Graham on Mar 7, 2012 5:06 PM
And if all you see in the drop-down list is <DEFAULT>, then I would suggest rechecking the user's privileges. Or provide more details about your environment: OS / Database / JDK version, and so on.

POSSIBLE TO SELECT SPECIFIC APPLICATIONS WITH MIGRATION ASSISTANT?

Is it possible to select specific applications to transfer from a Powerbook to an iMac? So far I've only found the given option, which imports the entire folder.
Thanks for helping.

http://discussions.apple.com/thread.jspa?threadID=1876275&tstart=0
That question was answered not more than an hour ago...

Is this possible to select Path nodes....? - Please help!

Hi Everyone!
Is this possible to select Path nodes. Like below image.
If I select more than one closed and apply Path operation like shapeOperation.SHAPEINTERSECT & combine path.
Thanks in advance.
Note: Select all nodes from path not a select path in Path palette.
Regards,
- yajiv

There are other older choices from which to experiment, such as Classilla 9.2.1 browser,
which is newer than the much older WaMcom mozilla derivative...
These would all have some issues, and one of them is the lack of correct Java support
along with any Flash player or other important parts whose update has ceased to happen.
Classilla:
http://www.floodgap.com/software/classilla/releases/
Older browsers, such as very early (Mac OS) Mozilla and Netscape 7 or before may be OK
if you can find them as downloads; but each will be lacking in some important area. For those
who may hope to use the email function in some, that may not work. It may in another, if the
technical specs for email haven't changed too much, or if the Internet provider allows access.
http://code.google.com/p/classilla/wiki/AAATheFAQ
MRJ and Flash 7 are supported to some limited extent, from what I've read; but for issues
including security and performance, it is 'forced-off' and should only be turned on to see if
a web page supports it, or in known-secure web sites. Classillia should be read into further.
Some models of older computer hardware predating OS X 10.2 may require a Firmware
update version to be installed in the older OS9 software, running in the computer, to be
able to safely consider running 10.2 or later, in the computer. So if you consider that, do
look into available or necessary firmware updates and install one as needed. Then, to run
an OS X, the computer may require other hardware updates, more RAM, larger HDD, etc.
Or be on the look-out for a newer build Macintosh which supports later OS systems; you
can find info in MacTracker.ca or everymac.com on what hardware supports which OS.
PS: if your older 'colors' G3 iBook were a 'dual-USB' model (white, 500MHz+) it would be
able to run up to Panther 10.3.9 and OS 9.2.2, without additional firmware update; limited
by the size of the hard disk drive, graphic processor, limited RAM upgrade, bus speed, etc.
Good luck & happy computing!

Is it possible to selectively block re-explode BOM in Sub-contracting PO ?

Similar Messages

Maybe you are looking for